Assessment of bioaccumulation of glyphosate and aminomethylphosphonic acid in marine mussels using capillary electrophoresis with light-emitting diode-induced fluorescence detection.

Glyphosate or N-(phosphonomethyl)glycine, widely used as herbicide in agriculture to control weeds and to facilitate harvesting, has been included in Group 2A pollutants (probably carcinogenic to humans) by the International Agency for Research on Cancer (IARC). In intensive agricultural areas, runoff and soil leaching are likely to drive glyphosate to surface waters, where the compound is often detected together with its main microbial metabolite, aminomethylphosphonic acid (AMPA). In the present study a method based on capillary electrophoresis coupled with light-emitting diode-induced fluorescence detection has been developed and validated for the determination of the two compounds in whole soft mass of marine mussels (Mytilus galloprovincialis). The method is based on the acidic hydrolysis of lyophilized tissue using 6 M HCl (oven at 110 °C for 22 h) to release the target analytes; their subsequent derivatization using 4-fluoro-7-nitro-2,1,3-benzoxadiazole, was found to be suitable for the sensitive fluorescence detection. To achieve optimum separation of the analytes from the matrix and degradation reagent interferences, the background electrolyte constituted by borate buffer (pH 9.2, 30 mM) was supplemented with 10 mM heptakis(2,6-di-O-methyl)-ß-cyclodextrin. The method was validated for linearity, precision, accuracy, robustness and sensitivity showing LOQ of 0.2 and 1.0 µg/g in fresh tissues, for AMPA and glyphosate, respectively; the recovery values ranged within 88.5 - 94.6% for glyphosate and 70.4 - 76.6% for AMPA. Experimental samples of Mediterranean mussels M. galloprovincialis treated with 100 µg/L or 500 µg/L of both glyphosate and AMPA, showed a dose dependent bioaccumulation of the compounds reaching maximum level of 77.0 µg/g and 11.3 µg/g of AMPA and glyphosate, respectively. The study demonstrates for the first time M. galloprovincialis as potential sentinel organisms for the environmental occurrence of these small amphoteric pollutants.

Quality by Design as a risk-based strategy in pharmaceutical analysis: Development of a liquid chromatography-tandem mass spectrometry method for the determination of nintedanib and its impurities.

Nintedanib (NIN) is a tyrosine kinase inhibitor recently approved for the treatment of idiopathic pulmonary fibrosis. As a new drug, no monograph is available so far in official compendia. A liquid chromatography-tandem mass spectrometry method is presented for the simultaneous determination of NIN and its seven potential impurities. The risk-based approach of Analytical Quality by Design was applied in method development. The critical method parameters (CMPs) were the type of organic solvent in the mobile phase, formic acid percentage, column flow rate, oven temperature, gradient slope of organic eluent. The critical method attributes (CMAs) were selected as analysis time and selectivity between the main compound NIN and the adjacent peaks. Design of Experiments methodology was effectively employed for establishing the relationship between the CMPs and the CMAs. In the scouting step, a Restek Ultra AQ C18 (100 × 2.1 mm, 2.7 µm) core-shell column was selected, and then the effects of different levels of the five CMPs on the CMAs were evaluated by means of a 35//16 symmetric screening matrix. A Box-Behnken Design made it possible to obtain detailed maps of predicted CMAs throughout the investigated experimental domain, pointing out the presence of interaction and quadratic effects. The probability of meeting the specifications for the CMAs was calculated by Monte-Carlo simulations, performing a risk analysis and drawing risk of failure maps, which were used to visualize and define the method operable design region (MODR) with a probability π ≥ 90%. The final working conditions (enclosing the MODR interval) were as follows: methanol as organic solvent; formic acid percentage, 0.15% v/v; flow rate, 0.40 mL min-1 (0.37-0.43 mL min-1); oven temperature, 40 °C (38-40 °C); gradient slope of organic eluent, 14.00% eluent B min-1 (12.85-15.15% eluent B min-1). The resulting analysis time was about 10 min. Validation was carried out according to International Council for Harmonisation guidelines and the optimized method was applied to the analysis of NIN soft capsules for quality control purposes.

Risk-based approach for method development in pharmaceutical quality control context: A critical review.

Pharmaceutical regulatory bodies increasingly require the implementation of systematic approaches in pharmaceutical product development. Quality control methods play a key role in the control strategy of drugs manufacturing to assure their quality. A risk-based approach in the analytical method development is strongly recommended to ensure that the method performances fit the purpose of the method during its entire life-cycle. In the last decade, analytical quality by design (AQbD), as risk management oriented methodology, has been progressively integrated with method development for fulfilling this objective. This approach has successfully allowed the quality to be designed into the analytical processes by obtaining a deep understanding of the procedures. In this paper the AQbD workflow and its application in the development of methods to be used for pharmaceutical quality control have been treated and discussed. Recent publications regarding how AQbD has been applied in separation techniques were reviewed. The different development strategies have been also showcased, highlighting their advantages and disadvantages, in order to give a useful overview.

Chiral capillary zone electrophoresis in enantioseparation and analysis of cinacalcet impurities: Use of Quality by Design principles in method development.

A capillary electrophoresis method for the simultaneous determination of the enantiomeric purity and of impurities of the chiral calcimimetic drug cinacalcet hydrochloride has been developed following Quality by Design principles. The scouting phase was aimed to select the separation operative mode and to identify a suitable chiral selector. Among the tested cyclodextrins, (2-carboxyethyl)-ß-cyclodextrin and (2-hydroxypropyl)-γ-cyclodextrin (HPγCyD) showed good chiral resolving capabilities. The selected separation system was solvent-modified capillary zone electrophoresis with the addition of HPγCyD and methanol. Voltage, buffer pH, methanol concentration and HPγCyD concentration were investigated as critical method parameters by a multivariate strategy. Critical method attributes were represented by enantioresolution and analysis time. A Box-Behnken Design allowed the contour plots to be drawn and quadratic and interaction effects to be highlighted. The Method Operable Design Region (MODR) was identified by applying Monte-Carlo simulations and corresponded to the multidimensional zone where both the critical method attributes fulfilled the requirements with a desired probability π≥90%. The working conditions, with the MODR limits, corresponded to the following: capillary length, 48.5cm; temperature, 18°C; voltage, 26kV (26-27kV); background electrolyte, 150mM phosphate buffer pH 2.70 (2.60-2.80), 3.1mM (3.0-3.5mM) HPγCyD; 2.00% (0.00-8.40%) v/v methanol. Robustness testing was carried out by a Plackett-Burman matrix and finally a method control strategy was defined. The complete separation of the analytes was obtained in about 10min. The method was validated following the International Council for Harmonisation guidelines and was applied for the analysis of a real sample of cinacalcet hydrochloride tablets.

Fast analysis of glibenclamide and its impurities: quality by design framework in capillary electrophoresis method development.

A fast capillary zone electrophoresis method for the simultaneous analysis of glibenclamide and its impurities (I(A) and I(B)) in pharmaceutical dosage forms was fully developed within a quality by design framework. Critical quality attributes were represented by I(A) peak efficiency, critical resolution between glibenclamide and I(B), and analysis time. Experimental design was efficiently used for rapid and systematic method optimization. A 3(5)//16 symmetric screening matrix was chosen for investigation of the five selected critical process parameters throughout the knowledge space, and the results obtained were the basis for the planning of the subsequent response surface study. A Box-Behnken design for three factors allowed the contour plots to be drawn and the design space to be identified by introduction of the concept of probability. The design space corresponded to the multidimensional region where all the critical quality attributes reached the desired values with a degree of probability π ≥ 90%. Under the selected working conditions, the full separation of the analytes was obtained in less than 2 min. A full factorial design simultaneously allowed the design space to be validated and method robustness to be tested. A control strategy was finally implemented by means of a system suitability test. The method was fully validated and was applied to real samples of glibenclamide tablets.