Impact of R&D innovation and political background on corporate growth: A study based on private listed companies in China.

Based on a review of related concepts and theories this study investigates the different impacts of research and development (R&D) innovation and political background on corporate growth in a particular context. Unlike other studies, we integrate these two factors. We empirically analyze 6079 sets of data from 1292 A-share private manufacturing enterprises in Shanghai and Shenzhen from 2012 to 2019. The results show that these factors directly impact corporate growth and have heterogeneous effects at different enterprise growth levels. We find the effect of R&D innovation on corporate growth is more pronounced for young firms. These findings highlight the need for firms to adjust their investments in R&D innovation and political backgrounds at different stages of development to adapt to different markets and political environments.

Comprehensive Assessment of Posterior Corneal Asphericity Change Calculated by Tangential Radius of Curvature After FS-LASIK and SMILE.

PURPOSE: To evaluate changes in posterior corneal asphericity (ΔQ) using the tangential radius of curvature after femtosecond laser-assisted in situ keratomileusis (FS-LASIK) and small incision lenticule extraction (SMILE) procedures. METHODS: One hundred twenty right eyes of myopic patients who underwent either FS-LASIK or SMILE procedures were analyzed using Sirius 3D corneal topography for assessment. The tangential radius was employed to calculate both preoperative and postoperative posterior corneal Q-values across each semimeridian. After both surgical interventions, the ΔQ value variations across the 360° semimeridional regions of the posterior corneal surface were compared. RESULTS: A marked postoperative increase in the posterior corneal Q-value was documented. No significant differences were noted between the postoperative Q-values or ΔQ-values of the two surgical approaches. Among patients with moderate myopia, postoperative Q-value exhibited considerably lower increases and ΔQ-value significantly smaller than their counterparts with high myopia. Moreover, the fluctuation in ΔQ across semimeridional regions was less evident in patients with moderate myopia than in those with high myopia. Notably, the degree of ΔQ fluctuation across semimeridional regions was similar between both surgical categories. These data offer insights into variations in the posterior corneal surface after refractive surgeries depending on the degree of myopia, illuminating their clinical relevance. CONCLUSIONS: Both FS-LASIK and SMILE introduce notable changes to posterior corneal asphericity among patients with different myopia intensities. Furthermore, the influence on the asphericity across the entire posterior surface is similarly distributed between FS-LASIK and SMILE techniques. [J Refract Surg. 2024;40(3):e133-e141.].

Quantitative assessment on soil concentration of heavy metal-contaminated soil with various sample pretreatment techniques and detection methods.

Detection and quantification of heavy metals in soil samples are significant in terms of environmental monitoring and risk assessment for metals. In order to improve the accuracy and precision to detect heavy metal, in this study, four standard samples (NASS-4, NASS-5, NASS-9, and NASS-16) were analyzed by evolving heating (electric heating plate, water bath, and microwave) and acidic systems (includes HCl, HNO3, HF, and HClO4). The result shows that different pretreatment methods have different effects on the extraction of heavy metal elements and five heavy metal elements (Cu, Zn, Pb, Ni, and Cr) were selected for optimization through pretreatment methods. Although the contents of heavy metals were same but we found diversity in the results. Under optimal conditions, the selected standard samples were analyzed by inductively coupled plasma mass spectrometry (ICP-MS), inductively coupled plasma atomic emission spectroscopy (ICP-AES), and atomic absorption spectroscopy (AAS), and the results were compared. The results show that different elements have their own most suitable detection methods, such as for Pb, the most suitable method is ICP-MS; and for Zn, the most suitable method is AAS. Pretreatment methods and detection techniques are combined to find and improve accuracy of results for certain elements. This study provides a reliable detection method for the accurate detection of heavy metals in the environment.

Understanding the Morphology of High-Performance Solar Cells Based on a Low-Cost Polymer Donor.

A low-cost and high-performance bulk heterojunction (BHJ) solar cell comprising an emerging polymer donor, poly[(thiophene)-alt-(6,7-difluoro-2-(2-hexyldecyloxy)quinoxaline)] (PTQ10), shows an efficiency of 12.7%. To improve the performance of the solar cells, a better understanding of the structure-property relationships of the PTQ10-based devices is crucial. Here, we fabricate PTQ10/nonfullerene and fullerene BHJ devices, including PTQ10/IDIC, PTQ10/ITIC, and PTQ10/PC71BM, processed with or without thermal annealing and additive and provide detailed descriptions of the relationships between the morphology and performance. PTQ10 is found to be highly miscible with nonfullerene IDIC and ITIC acceptors and poorly miscible with fullerene PC71BM acceptors. Thermal annealing promotes the crystallization of PTQ10 and phase separation of all PTQ10/IDIC, PTQ10/ITIC, and PTQ10/PC71BM devices, leading to an increased power conversion efficiencies (PCEs) of the PTQ10/IDIC and PTQ10/ITIC devices but a decreased PCE of PTQ10/PC71BM devices with 1,8-di-iodooctane (DIO) additive. Without thermal annealing, DIO greatly improves the morphology of PTQ10/PC71BM, leading to a higher PCE. The results show that the degree of phase separation and ordering in the PTQ10-based devices significantly influences device performance. The morphology-property correlations demonstrated will assist in the rational design of these low-cost polymer donor-based solar cells to achieve even higher performance.

Simplified synthetic routes for low cost and high photovoltaic performance n-type organic semiconductor acceptors.

The application of polymer solar cells (PSCs) with n-type organic semiconductor as acceptor requires further improving powder conversion efficiency, increasing stability and decreasing cost of the related materials and devices. Here we report a simplified synthetic route for 4,4,9,9-tetrahexyl-4,9-dihydro-s-indaceno [1,2-b:5,6-b'] dithiophene by using the catalyst of amberlyst15. Based on this synthetic route and methoxy substitution, two low cost acceptors with less synthetic steps, simple post-treatment and high yield were synthesized. In addition, the methoxy substitution improves both yield and efficiency. The high efficiency of 13.46% was obtained for the devices with MO-IDIC-2F (3,9-bis(2-methylene-5 or 6-fluoro-(3-(1,1-dicyanomethylene)-indanone)-4,4,9,9-tetrahexyl-5,10-dimethoxyl-4,9-dihydro-s-indaceno[1,2-b:5,6-b'] dithiophene) as acceptor. Based on the cost analysis, the PSCs based on MO-IDIC-2F possess the great advantages of low cost and high photovoltaic performance in comparison with those PSCs reported in literatures. Therefore, MO-IDIC-2F will be a promising low cost acceptor for commercial application of PSCs.

A low cost and high performance polymer donor material for polymer solar cells.

The application of polymer solar cells requires the realization of high efficiency, high stability, and low cost devices. Here we demonstrate a low-cost polymer donor poly[(thiophene)-alt-(6,7-difluoro-2-(2-hexyldecyloxy)quinoxaline)] (PTQ10), which is synthesized with high overall yield of 87.4% via only two-step reactions from cheap raw materials. More importantly, an impressive efficiency of 12.70% is obtained for the devices with PTQ10 as donor, and the efficiency of the inverted structured PTQ10-based device also reaches 12.13% (certificated to be 12.0%). Furthermore, the as-cast devices also demonstrate a high efficiency of 10.41% and the devices exhibit insensitivity of active layer thickness from 100 nm to 300 nm, which is conductive to the large area fabrication of the devices. In considering the advantages of low cost and high efficiency with thickness insensitivity, we believe that PTQ10 will be a promising polymer donor for commercial application of polymer solar cells.

Atom-Economic Synthesis of Fully Substituted 2-Aminopyrroles via Gold-Catalyzed Formal [3+2] Cycloaddition between Ynamides and Isoxazoles.

A concise and flexible synthesis of fully substituted 2-aminopyrroles via gold-catalyzed formal [3+2] cycloaddition between ynamides and isoxazoles has been developed. Under mild reaction conditions, various 2-aminopyrrole derivatives were obtained in good to excellent yields, thus providing an efficient and atom-economic way for the construction of fully substituted 2-aminopyrroles.