Following the evidence and using the appropriate regulatory tools: A European-wide risk assessment of copper in freshwaters.

The ecological risks of copper (Cu) in freshwaters have been the focus of regulatory assessments for several decades. Recently, it has been suggested by the European Commission that Cu represents a continent-wide risk to freshwaters. We assessed to what extent this suggestion is supported by the available evidence if Cu bioavailability is considered in the assessment of risk. We used several evidence-driven metrics to assess the continental-wide risks of Cu to European freshwaters. Such an approach is recommended and readily applicable where comprehensive data sets are available. We confirmed the validity of a bioavailability-based Environmental Quality Standard of 1 µg L-1 for Cu and used this to characterize the risks of Cu in 286 185 regulatory monitoring samples from 17 307 sites across 19 European countries between 2006 and 2021. These data show that risks, based on site averages and accounting for bioavailability, were identified in only two countries (Spain and Portugal). Investigation of these risks showed them to be highly localized to a single region in Spain and not reflective of the country-wide risks for either country. The 95th percentile of all the risk quotients for the continent-wide data set is 0.35. The relatively low levels of risk associated with Cu are supported by long-term trend data from sites on two large European rivers (Rhine and Meuse), where highly significant (p < 0.001) decreases in Cu concentrations over the last 40 years can be observed. We conclude that it is critical to consider metal bioavailability in both effects and exposures in assessments of potential risk to ensure ecological relevance. Integr Environ Assess Manag 2023;19:1570-1580. © 2023 WCA Environment Ltd. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Development of a bioavailability-based risk assessment framework for nickel in Southeast Asia and Melanesia.

Nickel laterite ore deposits are becoming increasingly important sources of Ni for the global marketplace and are found mainly in tropical and subtropical regions, including Indonesia, the Philippines, Papua New Guinea, Cuba, and New Caledonia. There are few legislatively derived standards or guidelines for the protection of aquatic life for Ni in many of these tropical regions, and bioavailability-based environmental risk assessment (ERA) approaches for metals have mainly been developed and tested in temperate regions, such as the United States and Europe. This paper reports on a multi-institutional, 5-y testing program to evaluate Ni exposure, effects, and risk characterization in the Southeast Asia and Melanesia (SEAM) region, which includes New Caledonia, Papua New Guinea, the Philippines, and Indonesia. Further, we have developed an approach to determine if the individual components of classical ERA, including effects assessments, exposure assessments, and risk characterization methodologies (which include bioavailability normalization), are applicable in this region. A main conclusion of this research program is that although ecosystems and exposures may be different in tropical systems, ERA paradigms are constant. A large chronic ecotoxicity data set for Ni is now available for tropical species, and the data developed suggest that tropical ecosystems are not uniquely sensitive to Ni exposure; hence, scientific support exists for combining tropical and temperate data sets to develop tropical environmental quality standards (EQSs). The generic tropical database and tropical exposure scenarios generated can be used as a starting point to examine the unique biotic and abiotic characteristics of specific tropical ecosystems in the SEAM region. Integr Environ Assess Manag 2021;17:802-813. © 2021 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Perspectives on Relevancy Assessment for Non-Standard Ecotoxicity Data in Environment Quality Standard derivation: Examples for Diclofenac.

A key step in deriving an Environmental Quality Standard (EQS) is assessing the reliability and relevance of the underpinning ecotoxicity data. While the assessment of data reliability is relatively well established, the detailed evaluation of data relevancy is a more recent development. We applied broadly accepted relevancy criteria to a series of non-standard ecotoxicity studies on diclofenac, focusing on some aspects that should be accounted for in studies used in EQS derivation. Specific relevancy issues include potential experimental bias, claimed 'significant effects' that are indistinguishable from controls, or within the range of normal, and lack of environmental applicability. We highlight that rigorous, comprehensive and, where necessary, specialist assessment of data relevancy for studies potentially applicable for EQS setting is critical if studies are to be appropriately used regulatory decision-making. We provide recommendations for researchers and environmental practitioners to ensure robust accounting of relevancy in non-standard studies is undertaken.

Are Lead Exposures a Risk in European Fresh Waters? A Regulatory Assessment Accounting for Bioavailability.

An indicative compliance assessment of the Europe-wide bioavailable lead Environmental Quality Standard of 1.2 µg L-1 (EQS) was undertaken against regulatory freshwater monitoring data from six European member states and FOREGS database. Bio-met, a user-friendly tool based upon Biotic Ligand Models (BLMs) was used to account for bioavailability, along with the current European Water Framework Directive lead dissolved organic carbon correction approach. The outputs from both approaches were compared to the BLM. Of the 9054 freshwater samples assessed only 0.6% exceeded the EQS of 1.2 µg L-1 after accounting for bioavailability. The data showed that ambient background concentrations of lead across Europe are unlikely to influence general compliance with the EQS, although there may be isolated local issues. The waters showing the greatest sensitivity to potential lead exposures are characterized by relatively low DOC (< 0.5 mg L-1), regardless of the pH and calcium concentrations.

Aquatic environmental risk assessment of manganese processing industries.

An environmental risk assessment (ERA) has been conducted for sites producing and processing manganese and its inorganic compounds, focussing on potential risks to freshwater. A site specific questionnaire was used to collect information. Sites fall into three broad categories: mining sites, refining sites, and sites producing chemicals and pigments. Waste disposal is principally carried out by the treatment of liquid wastes to separate solids for disposal off-site with a consented wastewater discharge, or disposal on-site using evaporation or settlement ponds in order to maintain the waste materials in a suitable manner following site closure. The main source of emissions from refining and alloying sites is from the treatment of emissions to air using wet scrubber air filters. There is also the potential for fugitive environmental emissions of manganese from stockpiles of raw material held on-site. Data provided from the questionnaires were both site-specific and also commercially sensitive. Therefore, this paper has undertaken the manganese exposure assessment, using a probabilistic approach to reflect the distribution of emissions of manganese and also to maintain the confidentiality of site specific data. An inverse correlation was observed between the total annual tonnage of manganese processed at the site and the emission factor, such that sites processing larger quantities resulted in lower emissions of manganese per tonne processed. The hazard assessment determined a Predicted No Effect Concentration (PNEC) for freshwater using a species sensitivity distribution approach, resulting in a freshwater PNEC of 0.075mgL-1 for soluble manganese. Based on the exposure data and the freshwater PNEC derived for this study, the distributions of risk characterisation ratios using the probabilistic approach indicates that two thirds of manganese processing sites would not be expected to pose a potential risk to the local aquatic environment due to wastewater emissions, although local risks are possible at some sites.

Assessment of the effects of nickel on benthic macroinvertebrates in the field.

A field-based evaluation of the biological effects of potential nickel (Ni) exposures was conducted using monitoring data for benthic macroinvertebrates and water chemistry parameters for streams in England and Wales. Observed benthic community metrics were compared to expected community metrics under reference conditions using RIVPACS III+ software. In order to evaluate relationships between Ni concentrations and benthic community metrics, bioavailable Ni concentrations were also calculated for each site. A limiting effect from Ni on the 90th percentile of the maximum achievable ecological quality was derived at "bioavailable Ni" exposures of 10.3 µg l(-1). As snails have been identified as particularly sensitive to nickel exposure, snail abundance in the field in response to nickel exposure, relative to reference conditions, was also analysed. A "low effects" threshold for snail abundance based on an average of spring and autumn data was derived as 3.9 µg l(-1) bioavailable Ni. There was no apparent effect of Ni exposure on the abundance of Ephemeroptera (mayflies), Plecoptera (stoneflies) or Tricoptera (caddisflies) when expressed relative to a reference condition within the range of "bioavailable Ni" exposures observed within the dataset. Nickel exposure concentrations co-vary with the concentrations of other stressors in the dataset, and high concentrations of Ni are also associated with elevated concentrations of other contaminants.

Regulatory consideration of bioavailability for metals: simplification of input parameters for the chronic copper biotic ligand model.

The chronic Cu biotic ligand model (CuBLM) provides a means by which the bioavailability of Cu can be taken into account in assessing the potential chronic risks posed by Cu at specific freshwater locations. One of the barriers to the widespread regulatory application of the CuBLM is the perceived complexity of the approach when compared to the current systems that are in place in many regulatory organizations. The CuBLM requires 10 measured input parameters, although some of these have a relatively limited influence on the predicted no-effect concentration (PNEC) for Cu. Simplification of the input requirements of the CuBLM is proposed by estimating the concentrations of the major ions Mg2+, Na+, K+, SO4(2-), Cl- , and alkalinity from Ca concentrations. A series of relationships between log10 (Ca, mg l(-1)) and log10 (major ion, mg l(-1)) was established from surface water monitoring data for Europe, and applied in the prediction of Cu PNEC values for some UK freshwater monitoring data. The use of default values for major ion concentrations was also considered, and both approaches were compared to the use of measured major ion concentrations. Both the use of fixed default major ion concentrations, and major ion concentrations estimated from Ca concentrations, provided Cu PNEC predictions which were in good agreement with the results of calculations using measured data. There is a slight loss of accuracy when using estimates of major ion concentrations compared to using measured concentration data, although to a lesser extent than when fixed default values are applied. The simplifications proposed provide a practical evidence-based methodology to facilitate the regulatory implementation of the CuBLM.