Microbial and potentially toxic elements risk assessment in high Andean river water based on Monte Carlo simulation, Peru.

The study evaluated microbial and Potentially Toxic Elements-PTEs risks in high Andean river water in Peru using Monte Carlo simulation. A total of 144 water samples were collected from four rivers and evaluated for physicochemical parameters, PTEs and bacterial pathogens. The microbial risk analysis for exposure to pathogens present in the water was based on the probability of occurrence of diseases associated with Escherichia coli, Pseudomonas aeruginosa and enterococci. PTEs risk analysis was performed using a Monte Carlo simulation approach. The results showed that the highest microbial risk due to exposure to water contaminated by E. coli, P. aeruginosa and enterococci was recorded in the Miraflores and Chia rivers. Meanwhile, the analysis of carcinogenic and non-carcinogenic risk by PTEs in adults and children revealed that the Chia river presents a high risk of contamination by PTEs, especially the carcinogenic risk for children. The Monte Carlo simulation indicated a 56.16% and 94.85% probability of exceeding the limit value of 0.0001 for carcinogenic risk in adults and children, respectively. It can be concluded that children consuming the waters of the Chia river are potentially at risk of As toxicity.

Low-Cost Light-Based GelMA 3D Bioprinting via Retrofitting: Manufacturability Test and Cell Culture Assessment.

Light-based bioprinter manufacturing technology is still prohibitively expensive for organizations that rely on accessing three-dimensional biological constructs for research and tissue engineering endeavors. Currently, most of the bioprinting systems are based on commercial-grade-based systems or modified DIY (do it yourself) extrusion apparatuses. However, to date, few examples of the adoption of low-cost equipment have been found for light-based bioprinters. The requirement of large volumes of bioinks, their associated cost, and the lack of information regarding the parameter selection have undermined the adoption of this technology. This paper showcases the retrofitting and assessing of a low-cost Light-Based 3D printing system for tissue engineering. To evaluate the potential of a proposed design, a manufacturability test for different features, machine parameters, and Gelatin Methacryloyl (GelMA) concentrations for 7.5% and 10% was performed. Furthermore, a case study of a previously seeded hydrogel with C2C12 cells was successfully implemented as a proof of concept. On the manufacturability test, deviational errors were found between 0.7% to 13.3% for layer exposure times of 15 and 20 s. Live/Dead and Actin-Dapi fluorescence assays after 5 days of culture showed promising results in the cell viability, elongation, and alignment of 3D bioprinted structures. The retrofitting of low-cost equipment has the potential to enable researchers to create high-resolution structures and three-dimensional in vitro models.

Xurography as a Rapid Fabrication Alternative for Point-of-Care Devices: Assessment of Passive Micromixers.

Despite the copious amount of research on the design and operation of micromixers, there are few works regarding manufacture technology aimed at implementation beyond academic environments. This work evaluates the viability of xurography as a rapid fabrication tool for the development of ultra-low cost microfluidic technology for extreme Point-of-Care (POC) micromixing devices. By eschewing photolithographic processes and the bulkiness of pumping and enclosure systems for rapid fabrication and passively driven operation, xurography is introduced as a manufacturing alternative for asymmetric split and recombine (ASAR) micromixers. A T-micromixer design was used as a reference to assess the effects of different cutting conditions and materials on the geometric features of the resulting microdevices. Inspection by stereographic and confocal microscopy showed that it is possible to manufacture devices with less than 8% absolute dimensional error. Implementation of the manufacturing methodology in modified circular shape- based SAR microdevices (balanced and unbalanced configurations) showed that, despite the precision limitations of the xurographic process, it is possible to implement this methodology to produce functional micromixing devices. Mixing efficiency was evaluated numerically and experimentally at the outlet of the microdevices with performances up to 40%. Overall, the assessment encourages further research of xurography for the development of POC micromixers.