Heavy Metal(oid)s Contamination and Potential Ecological Risk Assessment in Agricultural Soils.

Soil pollution caused by heavy metal(oid)s has generated great concern worldwide due to their toxicity, persistence, and bio-accumulation properties. To assess the baseline data, the heavy metal(oid)s, including manganese (Mn), iron (Fe), Cobalt (Co), nickel (Ni), copper (Cu), zinc (Zn), arsenic (As), lead (Pb), mercury (Hg), chromium (Cr), and cadmium (Cd), were evaluated in surface soil samples collected from the farmlands of Grand Forks County, North Dakota. Samples were digested via acid mixture and analyzed via inductively coupled plasma mass spectrometry (ICP MS) analysis to assess the levels, ecological risks, and possible sources. The heavy metal(oid) median levels exhibited the following decreasing trend: Fe > Mn > Zn > Ni > Cr > Cu > Pb > Co > As > Cd > Hg. Principal component analysis (PCA) and hierarchical cluster analysis (HCA) suggested the main lithogenic source for the studied metal(oid)s. Metal(oid) levels in the current investigation, except Mn, are lower than most of the guideline values set by international agencies. The contamination factor (Cf), geo accumulation index (Igeo) and enrichment factor (EF) showed considerable contamination, moderate contamination, and significant enrichment, respectively, for As and Cd on median value basis. Ecological risk factor (Er) results exhibited low ecological risk for all studied metal(oid)s except Cd, which showed considerable ecological risk. The potential ecological risk index (PERI) levels indicated low ecological risk to considerable risk. Overall, the results indicate the accumulation of As and Cd in the study area. The high nutrients of the soils potentially affect their accumulation in crops and impact on consumers' health. This drives the impetus for continued environmental monitoring programs.

Fabrication and characterization of novel, cost-effective graphitic carbon nitride/Fe coated textile nanocomposites for effective degradation of dyes and biohazards.

Textile-based photocatalysts are the new materials that can be utilized as an effective sustainable solution for biochemical hazards. Hence, we aimed to develop a sustainable, cost-effective, and facile approach for the fabrication of photocatalytic fabric using graphitic carbon nitride (g-C3N4) and ferric-based multifunctional nanocomposite. Bulk g-C3N4 was prepared from urea by heating it at 500 °C for 2 h. The structure of ball-milled g-C3N4 was engineered by doping with various amounts of iron (III) chloride hexahydrate solution (0.006 mol/L) and sintered at 90 °C for 24 h to prepare g-C3N4-nanosheets/α-Fe2O3 composites. These nanocomposites have potential avenues towards rational designing of g-C3N4 for improved photocatalytic, antibacterial, and antiviral behavior. The prepared nanocomposite was characterized for its surface morphology, chemical composition, crystal structure, catalytic, antibacterial, and antiviral behavior. The fabrication of ferric doped g-C3N4 nanocomposites was characterized by SEM, EDX, FTIR, and XRD analysis. The coated fabric nanocomposite was characterized for methylene blue dye degradation under visible light, antibacterial and antiviral behavior. The developed textile-based photocatalyst has been found with very good recyclability with photocatalytic degradation of dye up to 99.9 % when compared to conventional g-C3N4 powder-based photocatalyst.

The Biogenic Synthesis of Bimetallic Ag/ZnO Nanoparticles: A Multifunctional Approach for Methyl Violet Photocatalytic Degradation and the Assessment of Antibacterial, Antioxidant, and Cytotoxicity Properties.

In this study, bimetallic nanoparticles (NPs) of silver (Ag) and zinc oxide (ZnO) were synthesized using Leptadenia pyrotechnica leaf extract for the first time. Monometallic NPs were also obtained for comparison. The characterization of the prepared NPs was carried out using various techniques, including UV-Visible spectroscopy (UV-Vis), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The latter confirmed the crystalline nature and diameter of the monometallic and bimetallic NPs of Ag and ZnO. The SEM images of the prepared NPs revealed their different shapes. The biological activities of the NPs were evaluated concerning their antibacterial, antioxidant, and cytotoxic properties. The antibacterial activities were measured using the time-killing method. The results demonstrated that both the monometallic and bimetallic NPs inhibited the growth of Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria. The antioxidant activities of the NPs were evaluated using the DPPH (2,2-diphenyl-1-picrylhydrazyl) assay and their cytotoxicity was checked using the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. The results indicated that the controlled quantity of the monometallic and bimetallic NPs did not affect the viability of the cells. However, the decreased cell (L-929) viability suggested that the NPs could have anticancer properties. Furthermore, the photocatalytic degradation of methyl violet and 4-nitrophenol was investigated using the prepared Ag/ZnO NPs, examining the factors affecting the degradation process and conducting a kinetic and thermodynamic study. The prepared Ag/ZnO NPs demonstrated good photocatalytic degradation (88.9%) of the methyl violet (rate constant of 0.0183 min-1) in comparison to 4-nitrophenol (NPh), with a degradation rate of 81.37% and 0.0172 min-1, respectively. Overall, the bimetallic NPs showed superior antibacterial, antioxidant, cytotoxic, and photocatalytic properties compared to the monometallic NPs of Ag and ZnO.

Reducing SDG complexity and informing environmental management education via an empirical six-dimensional model of sustainable development.

Effective environmental management higher education programs are essential for achieving the Sustainable Development Goals (SDGs). Yet SDG complexity means many educators focus on environment and avoid critical but challenging social, economic and governance aspects. This undermines the calls for comprehensive environmental management education that effectively integrates all key sustainability dimensions. Various sustainability models, mostly founded on the pillars of sustainability, have consequently evolved. They are generally conceptual and/or involve subjective categorization of the SDGs, which has led to demands for more empirically based models. This study has consequently used a mixed-method approach to model Australian university students' SDG perceptions. The qualitative research identified three items (on average) for each SDG, and a quantitative survey then measured their perceived importance. Factor analysis generated a robust six-dimensional sustainable development model comprised of 37 SDG items, which validates environment and governance aspects of some traditional pillar-based sustainability models. It has also uncovered new social and economic dimensions: social harmony and equality; sustainable consumption and socioeconomic behaviors; sustainable production, industry and infrastructure; and acute poverty reduction. These findings can help educators, organizations and citizens to categorize and integrate SDGs via better understanding of their key dimensions and impacts.

Seismic risk assessment and hotspots prioritization: a developing country perspective.

Natural disasters pose a negative impact not only on human lives but also on infrastructures such as healthcare systems, supply chains, logistics, manufacturing, and service industries. The frequency of such calamities has grown over time, which not only poses a threat to human survival and the living environment but is also detrimental to the economic growth and sustainable development of society. Earthquakes cause the most destruction compared to other natural disasters, especially in developing countries where the conventional reactive approach to dealing with disasters gives less chance for the appropriate utilization of already limited resources. Additionally, mismanagement of the resources and the lack of a unified action plan hinder the purpose of helping the grieving population. Considering the foregoing, this study presents a methodology for identifying hotspots and helping prioritize pre- and post-disaster management action by conducting a thorough seismic risk assessment while taking into consideration the case of a developing country as its focus. This methodology allows for rapid risk assessment against any given scenario by providing quantitative estimates of the repercussions such as physical damage to the buildings, casualties including injuries, economic losses, displaced households, debris, shelter requirements, and hospital functionality. In short, it could help prioritize actions with greater impacts and serve as a foundation for the formulation of policies and plans intended to increase the resilience of a resource-constrained community. Thus, the findings can be utilized by government agencies, emergency management organizations, non-government organizations, and aiding countries as a decision support tool.

Green Synthesis of Zinc Oxide (ZnO) Nanoparticles from Green Algae and Their Assessment in Various Biological Applications.

The biosynthesis of algal-based zinc oxide (ZnO) nanoparticles has shown several advantages over traditional physico-chemical methods, such as lower cost, less toxicity, and greater sustainability. In the current study, bioactive molecules present in Spirogyra hyalina extract were exploited for the biofabrication and capping of ZnO NPs, using zinc acetate dihydrate and zinc nitrate hexahydrate as precursors. The newly biosynthesized ZnO NPs were characterized for structural and optical changes through UV-Vis spectroscopy, Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX). A color change in the reaction mixture from light yellow to white indicated the successful biofabrication of ZnO NPs. The UV-Vis absorption spectrum peaks at 358 nm (from zinc acetate) and 363 nm (from zinc nitrate) of ZnO NPs confirmed that optical changes were caused by a blue shift near the band edges. The extremely crystalline and hexagonal Wurtzite structure of ZnO NPs was confirmed by XRD. The involvement of bioactive metabolites from algae in the bioreduction and capping of NPs was demonstrated by FTIR investigation. The SEM results revealed spherical-shaped ZnO NPs. In addition to this, the antibacterial and antioxidant activity of the ZnO NPs was investigated. ZnO NPs showed remarkable antibacterial efficacy against both Gram-positive and Gram-negative bacteria. The DPPH test revealed the strong antioxidant activity of ZnO NPs.

Fluorescence Spectroscopy for the Assessment of Microbial Load in UVC Treated Water.

In this article, Fluorescence spectroscopy has been employed for the assessment of microbial load and it has been compared with the gold standard colony forming unit (CFU) and optical density (OD) methods. In order to develop a correlation between three characterization techniques, water samples of different microbial loads have been prepared by UVC disinfection method through an indigenously developed NUVWater sterilizer, which operates in close cycle flow configuration. A UV dose of 58.9 mJ/cm2 has been determined for 99.99% disinfection for a flow rate of 0.8 l/min. The water samples were excited at 270 nm which results in the tryptophan like fluorescence at 360 nm that decreases gradually with increase of UVC dose, indicating the bacterial degradation and it has been confirmed by OD and CFU methods. In addition, it has been proved that a close cycle water flow around UV lamp is imperative so that an appropriate dose must be delivered to microorganisms for an efficient disinfection. It has been found that due to the sensitive nature of Fluorescence spectroscopy, it yields immediate results, whereas, for CFU and OD methods, water samples needs to be inoculated for 24 h. Fluorescence spectroscopy, therefore, provide a fast, online, reliable and sensitive method for the monitoring of pathogenic quantification in drinking water.

Contamination Assessment and Potential Human Health Risks of Heavy Metals in Urban Soils from Grand Forks, North Dakota, USA.

Heavy metal (HM) pollution of soil is an increasingly serious problem worldwide. The current study assessed the metal levels and ecological and human health risk associated with HMs in Grand Forks urban soils. A total 40 composite surface soil samples were investigated for Mn, Fe, Co, Ni, Cu, Zn, As, Pb, Hg, Cr, Cd and Tl using microwave-assisted HNO3-HCl acid digestion and inductively coupled plasma mass spectrometry (ICP-MS) analysis. The enrichment factor (EF), contamination factor (CF), geoaccumulation index (Igeo), ecological risk and potential ecological risk index were used for ecological risk assessment. The park soils revealed the following decreasing trend for metal levels: Fe > Mn > Zn > Cr > Ni > Cu > Pb > As > Co > Cd > Tl > Hg. Based on mean levels, all the studied HMs except As and Cr were lower than guideline limits set by international agencies. Principal component analysis (PCA) indicated that Mn, Fe, Co, Ni, Cu, Zn, As, Cd, Pb, Cr and Tl may originate from natural sources, while Hg, Pb, As and Cd may come from anthropogenic/mixed sources. The Igeo results showed that the soil was moderately polluted by As and Cd and, based on EF results, As and Cd exhibited significant enrichment. The contamination factor analysis revealed that Zn and Pb showed moderate contamination, Hg exhibited low to moderate contamination and As and Cd showed high contamination in the soil. Comparatively higher risk was noted for children over adults and, overall, As was the major contributor (>50%), followed by Cr (>13%), in the non-carcinogenic risk assessment. Carcinogenic risk assessment revealed that As and Cr pose significant risks to the populations associated with this urban soil. Lastly, this study showed that the soil was moderately contaminated by As, Cd, Pb and Hg and should be regularly monitored for metal contamination.

In vivo assessment of artefacts in MRI images caused by conventional twistflex and various fixed orthodontic CAD/CAM retainers.

PURPOSE: To assess magnetic resonance imaging (MRI) artefacts caused by different computer-aided design/computer-aided manufacturing (CAD/CAM) retainers in comparison with conventional hand bent stainless steel twistflex retainers in vivo. MATERIALS AND METHODS: MRI scans (3 Tesla) were performed on a male volunteer with different CAD/CAM retainers (cobalt-chromium, CoCr; nickel-titanium, NiTi; grade 5 titanium, Ti5) and twistflex retainers inserted. A total of 126 landmarks inside and outside the retainer area (RA; from canine to canine) were evaluated by two blinded radiologists using an established five-point visibility scoring (1: excellent, 2: good, 3: moderate, 4: poor, 5: not visible). Friedman and two-tailed Wilcoxon tests were used for statistical analysis (significance level: p < 0.05). RESULTS: Twistflex retainers had the strongest impact on the visibility of all landmarks inside (4.0 ± 1.5) and outside the RA (1.7 ± 1.2). In contrast, artefacts caused by CAD/CAM retainers were limited to the dental area inside the RA (CoCr: 2.2 ± 1.2) or did not impair MRI-based diagnostics in a clinically relevant way (NiTi: 1.0 ± 0.1; Ti5: 1.4 ± 0.6). CONCLUSION: The present study on a single test person demonstrates that conventional stainless steel twistflex retainers can severely impair the diagnostic value in head/neck and dental MRI. By contrast, CoCr CAD/CAM retainers can cause artefacts which only slightly impair dental MRI but not head/neck MRI, whereas NiTi and Ti5 CAD/CAM might be fully compatible with both head/neck and dental MRI.

Assessment of cumulative microbial respiration and their ameliorative role in sustaining maize growth under salt stress.

Cumulative microbial respiration reflects microbial activities and their potential to support plant growth, where salt tolerant rhizobacteria can optimize their respiration, and ensure plant survival under salt stress. We evaluated cumulative microbial respiration of different salt tolerant rhizobacterial strains at different salinity levels, and checked their ability to sustain plant growth under natural saline conditions by using maize as test crop. Our results revealed that at the highest EC level (10 dS m-1), strain 'SUA-14' performed significantly better, and exhibited the greatest cumulative respiration (4.2 fold) followed by SHM-13 (3.8 fold), as compared to un-inoculated control. Moreover, results of the field trial indicated a similar trend, where significant improvements in shoot fresh weight (59%), root fresh weight (80%), shoot dry weight (56%), root dry weight (1.4 fold), leaf area (1.9 fold), straw yield (41%), cob diameter (33%), SPAD value (84%), yield (99%), relative water contents (91%), flavonoid (55%), 1000 grain weight (∼100%), soluble sugars (41%) and soluble proteins (45%) were observed due to inoculation of strain 'SUA-14' as compared to un-inoculated control. Similarly, substantial decline in leaf Na+ (34%), Na+/K+ ratio (69%), electrolyte leakage (8%), catalase (54%), peroxidase (73%), and H2O2 (50%) activities were observed after inoculation of 'SUA-14' with a concomitant increment in the leaf K+ contents (70%) under salinity stress than un-inoculated control. Hence, among all the tested rhizobacterial isolates, 'SUA-14' served as the most efficient strain in alleviating the detrimental impacts of salinity on maize growth and yield. The 16S rRNA sequencing identified it as Acinetobacter johnsonii.

Assessment of sublethal and transgenerational effects of spirotetramat, on population growth of cabbage aphid, Brevicoryne brassicae L. (Hemiptera: Aphididae).

The cabbage aphid (Brevicoryne brassicae L.) is a devastating pest of cruciferous crops causing economic damage worldwide and notably owing to its increasing resistance to commonly used pesticides. Such resistance prompts the development of integrated pest management (IPM) programs that include novel pesticides being effective against the aphids. Spirotetramat is a novel insecticide used against sap-sucking insect pests, particularly aphids. This study evaluated the toxicity of spirotetramat to adult apterous B. brassicae after 72 h using the leaf dipping method. According to the toxicity bioassay results, the LC50 value of spirotetramat to B. brassicae was 1.304 mgL-1. However, the sublethal concentrations (LC5 and LC15) and transgenerational effects of this novel insecticide on population growth parameters were estimated using the age-stage, two-sex life table theory method. The sublethal concentrations (LC5; 0.125 mgL-1 and LC15; 0.298 mgL-1) of spirotetramat reduced the adult longevity and fecundity of the parent generation (F0). These concentrations prolonged the preadult developmental duration while decreasing preadult survival, adult longevity and reproduction of the F1 generation. The adult pre-reproductive period was also extended by spirotetramat treatment groups. Subsequently, the population growth parameters such as the intrinsic rate of increase r, finite rate of increase λ and net reproductive rate R 0 of the F1 generation were decreased in spirotetramat treatment groups whereas, the mean generation time T of the F1 generation was not affected when compared to the control. These results indicated the negative effect of sublethal concentrations of spirotetramat on the performance of B. brassicae by reducing its nymphal survival, extending the duration of some immature stages and suppressing the population growth of B. brassicae. Overall, we demonstrated that spirotetramat is a pesticide showing both sublethal activities, and transgenerational effects on cabbage aphid; it may be useful for implementation in IPM programs against this aphid pest.

Total Bioactive Contents, Metabolic Profiling, Docking Studies, Antioxidant and Enzyme Inhibition Activities of Convolvulus Arvensis L. and Multivariate Analysis to Unravel a Potential Herb as Natural Resource for Pharmaceutical Industry.

Convolvulus arvensis L. is an evergreen herb growing in various regions of Pakistan. Despite of several medicinal properties associated to this herb, it was not investigated scientifically for its bioactive compounds and detailed pharmaceutical properties. Therefore, its methanolic extract was divided into hexane (CA-H), chloroform (CA-C), ethyl acetate (CA-E) and butanol (CA-B) soluble fractions. CA-H and CA-C were found rich in phenolics (30.73±0.63 and 20.15±0.59 mg GAE/g of the extract, respectively), and the same fractions exhibited significant antioxidant activities (DPPH: 5.23±0.11 & 12.34±0.17 mg TE/g extract, respectively; ABTS: 36.82±0.04 & 56.74±0.61 mg TE/g extract, respectively). Also in CUPRAC activity assay, CA-H and CA-C exhibited highest activities as 87.30±0.46 and 56.74±0.61 mg TE/g extract, respectively, while CA-C was most active in FRAP activity assay with value of 40.21±2.19 mg TE/g extract. Total antioxidant capacity (1.23±0.033 mmol TE/g extract) was also found higher for CA-C, while CA-H activity was also comparable, however, CA-H showed higher metal chelating activity (22.74±0.001 mg EDTAE/g extract) than that of CA-C (17.55±0.22 mg EDTAE/g extract). These activities clearly revealed a direct relation between antioxidant potential and phenolic contents of CA-H and CA-C. In AChE and BChE inhibitory assay, CA-H and CA-E showed better inhibition (AChE: 8.24±0.77 & 4.46±0.007 mg GALAE/g extract; BChE: 5.40±0.02 & 1.92±0.24 mg GALAE/g extract) as compared to other fractions, whereas, against tyrosinase, CA-B was most active (37.35±0.53 mg KAE/g extract). CA-H and CA-C also showed higher inhibitory potential (0.98±0.08 & 0.58±0.01 mmol ACAE/g extract) against α-Amylase; while against α-Glucosidase, CA-E was the most active fraction. UHPLC/MS analysis of the methanolic extract of C. arvensis disclosed the presence of 62 compounds as sterols, triterpenes, flavonoids, fatty acids, alkaloids and coumarins. In Multivariate Analysis, the total phenolic contents were correlated strongly with all antioxidant assays except FRAP and DPPH. Regarding enzyme inhibitory properties, only AChE, BChE and α-amylase were correlated with the total phenolic contents in the extracts. Docking analyses confirmed these findings, as identified compounds had high binding free energy and inhibition constants with the enzymes studied. It was finally concluded that C. arvensis is a potential industrial crop, which can be a component of nutraceuticals and functional foods, if evaluated for its toxicity.

Status of Research and Development Within Dental Institutes of Pakistan.

Health sector institutes of Pakistan can play a pivotal part in improving the status of health sciences. This can be achieved by facilitating research and innovation facilities. It is a need of the day to emphasize academicians and institutional administrations to take keen interest in this regard. Knowledge of the present research and development conditions within higher education institutions may help in policy development and fund allocations at the required levels. Therefore, the objective of this study is to evaluate the status of research and development within dental Institutes of Pakistan. A 30 itemed questionnaire was e mailed/posted to all institutional heads of all registered and recognized dental institutes of Pakistan. Response rate was 62% showing lack of administrational interest. Insufficient infrastructure, inadequate research planning, execution and intellectual property management was recorded. It can be concluded that higher education dental institutions of Pakistan are in need of deeper administrational and educational input to gear up the progress of health sector in this direction.

Morphological, physiological and molecular assessment of cotton for drought tolerance under field conditions.

Climate change could be an existential threat to many crops. Drought and heat stress are becoming harder for cultivated crops. Cotton in Pakistan is grown under natural high temperature and low moisture, could be used as a source of heat and drought tolerance. Therefore, the study was conducted to morphological, physiological and molecular characterization of cotton genotypes under field conditions. A total of 25 cotton genotypes were selected from the gene pool of Pakistan based on tolerance to heat and drought stress. In field trail, the stress related traits like boll retention percentage, plant height, number of nodes and inter-nodal distance were recorded. In physiological assessment, traits such as photosynthesis rate, stomatal conductance, transpiration rate, leaf temperature, relative water content and excised leaf water loss were observed. At molecular level, a set of 19 important transcription factors, controlling drought/heat stress tolerance (HSPCB, GHSP26, HSFA2, HSP101, HSP3, DREB1A, DREB2A, TPS, GhNAC2, GbMYB5, GhWRKY41, GhMKK3, GhMPK17, GhMKK1, GhMPK2, APX1, HSC70, ANNAT8, and GhPP2A1) were analyzed from all genotypes. Data analyses depicted that boll retention percentage, photosynthesis, stomatal conductance, relative water content under the stress conditions were associated with the presence of important drought & heat TF/genes which depicts high genetic potential of Pakistani cotton varieties against abiotic stress. The variety MNH-886 appeared in medium plant height, high boll retention percentage, high relative water content, photosynthesis rate, stomatal conductance, transpiration rate and with maximum number transcription factors under study. The variety may be used as source material for heat and drought tolerant cotton breeding. The results of this study may be useful for the cotton breeders to develop genotype adoptable to environmental stresses under climate change scenario.

Analyzing global inequality in access to energy: Developing policy framework by inequality decomposition.

Energy poverty is a critical policymaking problem in the world, while the outlined solutions in academic and policy literature talks about the solutions, without addressing the possible cause of the problem. The interaction between labor and energy market might pave a way to address the issue. Within the context of energy poverty, this interaction might turn out to be a major roadblock in the way to attain the objectives of Sustainable Development Goals (SDGs). From this perspective, this study aims at analyzing the constituents of inequality in access to energy, and in that pursuit, it has employed Kaya-Theil Decomposition method. The study is carried out at the global level over the period of 1990-2019. The study outcomes demonstrate all the inequality components to be rising during the study period. Presence of a possible feedback loop in the association might create the Vicious Circle of Energy Poverty around the globe. This study contributes to the literature by addressing the demand-side dimension of the energy poverty issue, while using the Kaya-Theil Decomposition method as an estimator of demand-side factors. Based on the study outcomes, a policy framework has been recommended, and it is aimed at helping the nations to achieve the objectives of SDG 7, SDG 8, and SDG 10.

Prevalence and management of aphids (Hemiptera: Aphididae) in different wheat genotypes and their impact on yield and related traits.

Wheat (Triticum aestivum L.) production is significantly altered by the infestation of sucking insects, particularly aphids. Chemical sprays are not recommended for the management of aphids as wheat grains are consumed soon after crop harvests. Therefore, determining the susceptibility of different wheat genotypes and selecting the most tolerant genotype could significantly lower aphid infestation. This study evaluated the susceptibility of six different wheat genotypes ('Sehar-2006', 'Shafaq-2006', 'Faisalabad-2008', 'Lasani-2008', 'Millat-2011' and 'Punjab-2011') to three aphid species (Rhopalosiphum padi Linnaeus, Schizaphis graminum Rondani, Sitobion avenae Fabricius) at various growth stages. Seed dressing with insecticides and plant extracts were also evaluated for their efficacy to reduce the incidence of these aphid species. Afterwards, an economic analysis was performed to compute cost-benefit ratio and assess the economic feasibility for the use of insecticides and plant extracts. Aphids' infestation was recorded from the seedling stage and their population gradually increased as growth progressed towards tillering, stem elongation, heading, dough and ripening stages. The most susceptible growth stage was heading with 21.89 aphids/tiller followed by stem elongation (14.89 aphids/tiller) and dough stage (13.56 aphids/tiller). The genotype 'Punjab-2011' recorded the lower aphid infestation than 'Faisalabad-2008', 'Sehar-2006', 'Lasani-2008' and 'Shafaq-2006'. Rhopalosiphum padi appeared during mid-February, whereas S. graminum and S. avenae appeared during first week of March. Significant differences were recorded for losses in number of grains/spike and 1000-grain weight among tested wheat genotypes. The aphid population had non-significant correlation with yield-related traits. Hicap proved the most effective for the management of aphid species followed by Hombre and Husk among tested seed dressers, while Citrullus colocynthis L. and Moringa oleifera Lam. plant extracts exhibited the highest efficacy among different plant extracts used in the study. Economic analysis depicted that use of Hombre and Hicap resulted in the highest income and benefit cost ratio. Therefore, use of genotype Punjab-2011' and seed dressing with Hombre and Hicap can be successfully used to lower aphid infestation and get higher economic returns for wheat crop.

Simulation of Light Distribution in Gamma Irradiated UHMWPE Using Monte Carlo Model for Light (MCML) Transport in Turbid Media: Analysis for Industrial Scale Biomaterial Modifications.

(1) Background: This study investigated the miscibility of carbon-based fillers within industrial scale polymers for the preparation of superior quality polymer composites. It focuses on finding the light distribution in gamma irradiated ultra-high molecular weight polyethylene (UHMWPE). (2) Methods: The Kubleka-Munk model (KMM) was used to extract the optical properties, i.e., absorption coefficients (µa) and scattering coefficients (µs). Samples amounting to 30 kGy and 100 kGy of irradiated (in the open air) UHMWPE from 630 nm to 800 nm were used for this purpose. Moreover, theoretical validation of experimental results was performed while using extracted optical properties as inputs for the Monte Carlo model of light transport (MCML) code. (3) Conclusions: The investigations revealed that there was a significant decrease in absorption and scattering coefficient (µa & µs) values with irradiation, and 30 kGy irradiated samples suffered more compared to 100 kGy irradiated samples. Furthermore, the simulation of light transport for 800 nm showed an increase in penetration depth for UHMWPE after gamma irradiation. The decrease in dimensionless transport albedo  µs(µa+µs) from 0.95 to 0.93 was considered responsible for this increase in photon absorption per unit area with irradiation. The report results are of particular importance when considering the light radiation (from 600 nm to 899 nm) for polyethylene modification and/or stabilization via enhancing the polyethylene chain mobility.

A Journey From SARS-CoV-2 to COVID-19 and Beyond: A Comprehensive Insight of Epidemiology, Diagnosis, Pathogenesis, and Overview of the Progress into Its Therapeutic Management.

The 2019 novel coronavirus (2019-nCoV), commonly known as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) or coronavirus disease 2019 (COVID-19), was first revealed in late 2019 in Wuhan city, Hubei province, China. It was subsequently spread globally and thereby declared as a pandemic by WHO in March 2020. The disease causes severe acute respiratory illness and is highly contagious due to the fast-onward transmission. As of the mid of November 2020, the disease has affected 220 countries with more than 16 million active cases and 1.3 million deaths worldwide. Males, pregnant women, the elderly, immunosuppressed patients, and those with underlying medical conditions are more vulnerable to the disease than the general healthy population. Unfortunately, no definite treatment is available. Although remdesivir as an antiviral had been approved for use in those above 12 years of age and 40 kg weight group, it has been observed to be ineffective in large-scale SOLIDARITY trials by WHO. Moreover, dexamethasone has been found to increase the recovery rate of ventilated patients; oxygen and inhaled nitric oxide as a vasodilator have been given emergency expanded access. In addition, more than 57 clinical trials are being conducted for the development of the vaccines on various platforms. Two vaccines were found to be significantly promising in phase III results. It is concluded that till the approval of a specific treatment or development of a vaccine against this deadly disease, the preventive measures should be followed strictly to reduce the spread of the disease.

Bioaccumulation of zinc in edible tropical vegetables in Peninsular Malaysia and its human health risk assessment based on various ethnicities in Malaysia.

Along with the growing utilization of zinc (Zn) and Zn-containing nanoparticles in various industries, Zn ecotoxicological evaluation on human food supply is necessary even though Zn is generally considered safe and rarely concentrated ecotoxicologically. This study aimed to investigate the bioaccumulation of Zn in 18 species of vegetables (seven leafy, nine fruity vegetables and one species each of tuber and legume) collected from two farming sites in the west coast of Peninsular Malaysia. A human health risk assessment (HHRA) was also conducted. In addition to HHRA based on the general population, HHRA based on each major ethnic group of the Malaysian society was also determined considering that the food consumption pattern would definitely be varied across ethnicities and age groups (children and adults). The study results showed that Zn concentrations were significantly higher (p < 0.05) in leafy vegetables than in other types of vegetables. However, the target hazard quotient (THQ) values were all found to be < 1.0. Therefore, based on the Malaysian ethnicities and age groups with their respective vegetable consumption patterns, the results indicated insignificant noncarcinogenic human health risk of Zn via oral consumption of vegetables by the Malaysian population. As a metric of measurement of HHRA, a comparison of THQ values could yield previously unreported insights into HHRA differences among the compared populations. A comparison of THQ values among the consumer groups indicated higher HHR for Chinese Malaysians and children due to their higher vegetable consumption and lower body weight, respectively. A comparison the Zn intakes of all the consumer groups with the recommended nutrient intakes indicated that the oral consumption of the vegetable species collected in this study would not result in Zn-related hazards and would not be able to fulfil the Zn dietary need of the individual consumer.

Evaluation of Contamination Status and Health Risk Assessment of Essential and Toxic Metals in Cyprinus carpio from Mangla Lake, Pakistan.

Although fish as a diet has many health benefits, metal accumulation in fish has been an increasing public health concerns across the world. The Cyprinus carpio samples were collected from Mangla Lake, Mirpur, Azad Kashmir, Pakistan, and analyzed for 18 essential and toxic trace metals. In edible muscles of the fish, average concentration (µg/g) of K (3002) was the highest, followed by Na (648), Ca (435), Mg (227), and Zn (161). Relatively lower levels (µg/g) were noted for Fe (16.9), Pb (6.05), Sr (4.01), Se (3.49), Co (2.90), Ni (2.37), Mn (2.29), As (1.48), and Cu (1.37), while least levels (µg/g) were found for Cr (0.61), Cd (0.52), Hg (0.15), and Li (0.09) in muscles. Majority of the metals revealed higher accumulation in gills compared with those in scales and muscles. Mean levels of Zn, Mn, Co, Pb, As, and Cd in Cyprinus carpio muscles were found to be exceeding most of the international permissible limits in muscles for safe human consumption. Estimated daily/weekly intakes and hazard quotients/index suggested a high risk related to the intake of Cyprinus carpio from Mangla Lake due to heavy metal contamination. Likewise, target cancer risk (TCR) also indicated significant lifetime carcinogenic health risks to the consumers.