Assessment of home care aides' respiratory exposure to total volatile organic compounds and chlorine during simulated bathroom cleaning: An experimental design with conventional and "green" products.

Home care (HC) aide visits to clients' homes often involve cleaning and disinfecting (C&D) bathrooms. Some ingredients in C&D household products are associated with respiratory illness, including sodium hypochlorite (bleach) and quaternary ammonium compounds (quats). "Green" products may be safer for the environment, however there are limited quantitative evaluations of their respiratory risks. This study assessed airborne concentrations and time profiles of total volatile organic compounds (TVOC) and chlorine generated during typical bathroom cleaning performed by aides using conventional and green products. Aides performed cleaning tasks in a simulated residential bathroom constructed in an environmental air sampling laboratory. A balanced experimental design involved each aide coming to the lab for four visits during which she performed two 20-min cleaning sessions using one of three C&D products (bleach-based, 1-5% sodium hypochlorite by weight; quats-based, 0.1-1% by weight quaternary ammonium compounds; and "green," 0.05% by weight thymol, a component of botanical thyme oil) or distilled water as a control. TVOC and chlorine direct reading instruments were attached to aides with sample inlets located in the breathing zone. Ten-second averages of TVOC and chlorine gas concentrations and instantaneous peak concentrations were recorded for the sessions' duration. TVOC concentrations by methods of C&D application (spraying, streaming, wiping) also were evaluated. The study completed 169 air sampling sessions with 22 aides. The quats-based product generated more than twice the average TVOC concentrations (mean = 1,210 ppb) than the bleach-based (mean = 593 ppb) or green (mean = 498 ppb) products. Each product generated TVOC concentrations that rose rapidly within the first few minutes of application. Spraying produced the highest TVOC exposures, wiping the lowest. Thirteen aides (65%) experienced peak chlorine exposures above the OSHA PEL ceiling limit (1 ppm) when using the bleach-based product. HC aides may experience respiratory hazards from use of conventional or green C&D products formulated with bleach or other respiratory irritants and sprayed in small, poorly ventilated spaces typical of bathrooms. Spraying should be avoided.

The frequency of workplace exacerbation among health maintenance organisation members with asthma.

OBJECTIVES: Workplace conditions can potentially contribute to the worsening of asthma, yet it is unclear what percentage of adults with asthma experience workplace exacerbation of symptoms. The objective of this investigation was to determine the prevalence of workplace exacerbation of asthma (WEA). METHODS: Adults with asthma aged 18-44 were enrolled into the baseline survey of a longitudinal study. Members of a health maintenance organisation were considered candidates for participation if they fulfilled membership, diagnostic, and treatment criteria based on automated review of electronic billing, claims, and pharmacy records. Diagnosis and treatment were confirmed by manual review of medical records. A telephone questionnaire was administered. A work related symptom score was assigned to each participant based on responses to questions about work related asthma symptoms, medication use, and symptom triggers. Blinded to participants' answers to these questions, two researchers independently reviewed the self-reported work histories and assigned exposure ratings. A final exposure score was then calculated. Participants with sufficient evidence for work related symptoms and exposure were classified as having WEA. RESULTS: Of the 598 participants with complete data, 557 (93%) were working, and 136 (23%) fulfilled the criteria for WEA. Those with WEA were more likely to be male and to report that they had been bothered by asthma symptoms during the past seven days. CONCLUSIONS: Workplace exacerbation of asthma was common in this study population, occurring in over a fifth of these adults with asthma. Physicians should consider that work can contribute to the exacerbation of symptoms when treating adults with asthma.

Occupational skin diseases in Washington State, 1989 through 1993: using workers' compensation data to identify cutaneous hazards.

OBJECTIVES: This study sought to characterize occupational dermatoses and cutaneous hazards. METHODS: Workers' compensation claims filed for skin disease in the Washington State Fund were analyzed for 1989 through 1993; incidence rates for industries and employers were calculated, and cutaneous hazards associated with the highest rates were identified. RESULTS: A total of 7445 claims were filed for skin disorders, principally contact dermatitis; 675 (9.1%) involved more than 3 missed work-days. The rate of accepted skin disorder claims was 1.0 per 1000 full-time employee-years. The highest incidence rates (4.6 to 30.7 accepted claims per 1000 full-time employee-years) were in certain manufacturing industries (plastics related, concrete products, aircraft parts, sporting goods, and boat building), wholesale farm product raw materials, automotive glass replacement, and beauty shops. Seven of the 10 employers with the highest incidence rates (19.6 to 85.5 accepted claims per 1000 full-time employee-years) used fiber-reinforced plastics (composites) and exposed workers to epoxy and other resin systems associated with contact dermatitis. CONCLUSIONS: Workers' compensation data identify known and emerging workplace cutaneous hazards and show promise for targeting prevention efforts.

Exposure assessment for a field investigation of the acute respiratory effects of metalworking fluids. I. Summary of findings.

The exposure assessment summarized here is part of an epidemiologic study of the acute respiratory health effects of metalworking fluid (MF) exposures. Exposures were measured as the inhalable concentrations of the MF aerosol, a variety of metals and elements, and endotoxin as well as the level of culturable bacteria in the aerosol size fraction less than 8 microns. Bulk samples of soluble MFs were tested for pH, mineral and tramp oil fraction, endotoxin, culturable bacteria, and lipopolysaccharide levels. The MF exposed workers had higher geometric mean inhalable aerosol exposures (0.181 mg/m3) than the MF unexposed workers (0.046 mg/m3). The MF exposed workers had higher geometric mean (GM) airborne culturable microbial counts (102 colony-forming units (CFU)/m3 for bacteria < 8 microns) than the unexposed workers (GM = 14 CFU/m3). Among the unexposed, Bacillus was the predominant airborne species, while among the exposed workers, Pseudomonas predominated. Exposed workers also had higher geometric mean airborne endotoxin levels (GM = 7.1 endotoxin units (EU)/m3) than the unexposed workers (GM = 1.9 EU/m3). Elemental concentrations of iron, chlorine, and sulfur were substantially higher among the exposed workers compared to the unexposed workers. For soluble metalworking fluids, the levels of bulk constituents were examined by three categories of time since the machine sump was refilled with fresh MF (< 4 days, 4-21 days, > 21 days). Univariate analyses of percent oil, pH, culturable bacteria, tramp oil percent, endotoxin, or fatty acid levels all showed no statistically significant changes in level over time.