Zein nanoparticles as low-cost, safe, and effective carriers to improve the oral bioavailability of resveratrol.

The clinical translation of the multiple pharmacological effects of resveratrol (RSV) found in preclinical studies has been impaired by its poor bioavailability, due to poor solubility and rapid metabolism and elimination. The inclusion of this molecule in medicines or functional food products will be ineffective unless suitable systems are developed. Zein protein may constitute an inexpensive, safe, and effective choice to produce nanoparticles (NPs) to incorporate hydrophobic molecules and overcome the bioavailability issues of RSV. In this work, we loaded RSV into zein NPs by using a nanoprecipitation method. Unloaded and RSV-loaded NPs presented average diameter values in the range of 120-180 nm, narrow size distribution (polydispersity index < 0.150), and zeta potential of around + 20 mV. The association efficiency of the drug was equal to or greater than 77% for different initial drug loads. Scanning electron microscopy imaging revealed that zein NPs were round-shaped and presented a smooth surface. Aqueous suspensions of zein NPs were stable for at least 1 month when stored at 4 °C. The freeze-drying of zein NPs using sucrose as cryoprotectant allowed an easy re-suspension of NPs in water without significantly changing the initial colloidal properties. RSV-loaded NPs presented low cytotoxicity to the human colorectal Caco-2 and HT29-MTX cell lines. Finally, permeability studies of RSV across Caco-2 and Caco-2/HT29-MTX evidenced some ability of zein NPs to protect RSV from metabolism events. However, further investigation is needed in order to confirm the possible role of zein NPs in the metabolic stability of RSV. Overall, zein NPs may present the potential to circumvent bioavailability issues of RSV. Graphical abstract.

In vivo, ex vivo and in vitro assessment of buccal permeation of drugs from delivery systems.

Introduction: Buccal mucosa has been described as an attractive site for local and systemic drug delivery, owing its accessibility, safety, and excellent blood supply. The absorption of drugs through buccal mucosa has been assessed by in vivo, ex vivo and in vitro permeability studies, using animal and cell-based models with close resemblance to the human buccal mucosa.Areas covered: This paper focuses on the current in vivo, ex vivo and in vitro permeability studies to analyze the absorption of compounds of interest through buccal mucosa, as well as their advantages and limitations in the preclinical studies of the drugs absorption profiles. The techniques for preparation and preservation of the animal buccal tissue are also discussed to evaluate their interference in the integrity and permeability of the tissues.Expert opinion: Overall, the permeability studies have been useful to evaluate the drugs absorption and to clarify the mechanism of transport of drugs across human buccal mucosa, as well as to explain the enhancement of permeability provided by certain dosage forms. Currently, several researchers have demonstrated particular interest in ex vivo permeability studies, due to their effectiveness in the evaluation of drug absorption and low costs in the acquisition of buccal mucosa samples.

Lipid Architectonics for Superior Oral Bioavailability of Nelfinavir Mesylate: Comparative in vitro and in vivo Assessment.

Nelfinavir mesylate (NFV), a human immunodeficiency virus (HIV) protease inhibitor, is an integral component of highly active anti retro viral therapy (HAART) for management of AIDS. NFV possesses pH-dependent solubility and has low and variable bioavailability hampering its use in therapeutics. Lipid-based particulates have shown to improve solubility of poorly water soluble drugs and oral absorption, thereby aiding in improved bioavailability. The current study compares potential of vesicular and solid lipid nanocarriers of NFV with drug nanocrystallites and microvesicular systems like cochleates in improving bioavailability of NFV. The paper outlines investigation of systems using in vitro models like in vitro lipolysis, in vitro release, and permeation through cell lines to predict the in vivo potential of nanocarriers. Finally, in vivo pharmacokinetic study is reported which provided proof of concept in sync with results from in vitro studies. Graphical Abstract ᅟ.

Development of PLGA nanoparticles loaded with clofazimine for oral delivery: Assessment of formulation variables and intestinal permeability.

The use of polymeric nanoparticles as delivery systems is a promising tool to overcome drawbacks related to low aqueous solubility of drugs, which limit their in vivo bioavailability. The aim of this study was to decrease clofazimine (CLZ) toxicity using experimental design to formulate CLZ loaded in PLGA nanoparticles (NPs-CLZ) through a Plackett-Burman design (PBD). A screening PBD was constructed with twelve formulations involving six variables among process and formulation parameters and the selected responses were particle size, polydispersity index (PDI), association efficiency (AE) and drug loading (DL). The formulation was achieved based on the desirability tool, and the obtained NPs-CLZ formulation was characterized regarding morphology, physicochemical properties, in vitro release and cellular studies. Particle size, PDI, AE and DL were found to be 211±3nm, 0.211±0.009, 70±5% and 12±1%, respectively. Physicochemical studies confirmed the absence of chemical interactions between CLZ and other nanoparticles constituents and the amorphous state of CLZ, while morphological analysis revealed the spherical shape of the particles. In vitro release profile of CLZ from NPs-PLGA showed a slow pattern of drug release. Cell viability studies towards intestinal cells revealed that NPs-CLZ did not show CLZ toxicity on Caco-2 and HT29-MTX cells compared to free CLZ solutions. Moreover, CLZ could permeate Caco-2 monolayers substantially at the end of 8h. It can be concluded that the proposed NPs-CLZ represent a promising platform to the oral delivery of CLZ as they were able to decrease its intrinsic toxicity, with improved absorption.

pH-sensitive nanoparticles for improved oral delivery of dapsone: risk assessment, design, optimization and characterization.

AIM: To optimize the production of pH-sensitive dapsone (DAP) nanoparticles based on Eugradit L100 (NPs-EL100-DAP) for oral delivery. MATERIALS & METHODS: NPs-EL100-DAP were optimized using a Plackett-Burman design and a Box-Behnken design. The physicochemical properties of the obtained nanoparticles were monitored by microscopy, dynamic light scattering, Fourier transform infrared spectroscopy, differential scanning calorimetry, in vitro release assays, and examined for cytotoxicity and permeation across intestinal barrier. RESULTS: The in vitro release assay of NPs-EL100-DAP confirmed the nanoparticles' pH sensitivity and the ability to deliver DAP at intestinal environment. NPs-EL100-DAP demonstrated enhanced intestinal interactions in comparison to free DAP, across Caco-2 monolayers. CONCLUSION: These studies demonstrate the potential of NPs-EL100-DAP as a therapeutic platform for oral treatment of leprosy.

Insights on in vitro models for safety and toxicity assessment of cosmetic ingredients.

According to the current European legislation, the safety assessment of each individual cosmetic ingredient of any formulation is the basis for the safety evaluation of a cosmetic product. Also, animal testing in the European Union is prohibited for cosmetic ingredients and products since 2004 and 2009, respectively. Additionally, the commercialization of any cosmetic products containing ingredients tested on animal models was forbidden in 2009. In consequence of these boundaries, the European Centre for the Validation of Alternative Methods (ECVAM) proposes a list of validated cell-based in vitro models for predicting the safety and toxicity of cosmetic ingredients. These models have been demonstrated as valuable and effective tools to overcome the limitations of animal in vivo studies. Although the use of in vitro cell-based models for the evaluation of absorption and permeability of cosmetic ingredients is widespread, a detailed study on the properties of these platforms and the in vitro-in vivo correlation compared with human data are required. Moreover, additional efforts must be taken to develop in vitro models to predict carcinogenicity, repeat dose toxicity and reproductive toxicity, for which no alternative in vitro methods are currently available. This review paper summarizes and characterizes the most relevant in vitro models validated by ECVAM employed to predict the safety and toxicology of cosmetic ingredients.

Pharmacological and toxicological assessment of innovative self-assembled polymeric micelles as powders for insulin pulmonary delivery.

AIM: Explore the use of polymeric micelles in the development of powders intended for pulmonary delivery of biopharmaceuticals, using insulin as a model protein. MATERIALS & METHODS: Formulations were assessed in vitro for aerosolization properties and in vivo for efficacy and safety using a streptozotocin-induced diabetic rat model. RESULTS: Powders presented good aerosolization properties like fine particle fraction superior to 40% and a mass median aerodynamic diameter inferior of 6 µm. Endotracheally instilled powders have shown a faster onset of action than subcutaneous administration of insulin at a dose of 10 IU/kg, with pharmacological availabilities up to 32.5% of those achieved by subcutaneous route. Additionally, micelles improved the hypoglycemic effect of insulin. Bronchoalveolar lavage screening for toxicity markers (e.g., lactate dehydrogenase, cytokines) revealed no signs of lung inflammation and cytotoxicity 14 days postadministration. CONCLUSION: Developed powders showed promising safety and efficacy characteristics for the systemic delivery of insulin by pulmonary administration.

Development and in vivo safety assessment of tenofovir-loaded nanoparticles-in-film as a novel vaginal microbicide delivery system.

UNLABELLED: Topical pre-exposure prophylaxis (PrEP) with antiretroviral drugs holds promise in preventing vaginal transmission of HIV. However, significant biomedical and social issues found in multiple past clinical trials still need to be addressed in order to optimize protection and users' adherence. One approach may be the development of improved microbicide products. A novel delivery platform comprising drug-loaded nanoparticles (NPs) incorporated into a thin polymeric film base (NPs-in-film) was developed in order to allow the vaginal administration of the microbicide drug candidate tenofovir. The system was optimized for relevant physicochemical features and characterized for biological properties, namely cytotoxicity and safety in a mouse model. Tenofovir-loaded poly(lactic-co-glycolic acid) (PLGA)/stearylamine (SA) composite NPs with mean diameter of 127nm were obtained with drug association efficiency above 50%, and further incorporated into an approximately 115µm thick, hydroxypropyl methylcellulose/poly(vinyl alcohol)-based film. The system was shown to possess suitable mechanical properties for vaginal administration and to quickly disintegrate in approximately 9min upon contact with a simulated vaginal fluid (SVF). The original osmolarity and pH of SVF was not affected by the film. Tenofovir was also released in a biphasic fashion (around 30% of the drug in 15min, followed by sustained release up to 24h). The incorporation of NPs further improved the adhesive potential of the film to ex vivo pig vaginal mucosa. Cytotoxicity of NPs and film was significantly increased by the incorporation of SA, but remained at levels considered tolerable for vaginal delivery of tenofovir. Moreover, histological analysis of genital tissues and cytokine/chemokine levels in vaginal lavages upon 14days of daily vaginal administration to mice confirmed that tenofovir-loaded NPs-in-film was safe and did not induce any apparent histological changes or pro-inflammatory response. Overall, obtained data support that the proposed delivery system combining the use of polymeric NPs and a film base may constitute an exciting alternative for the vaginal administration of microbicide drugs in the context of topical PrEP. STATEMENT OF SIGNIFICANCE: The development of nanotechnology-based microbicides is a recent but promising research field seeking for new strategies to circumvent HIV sexual transmission. Different reports detail on the multiple potential advantages of using drug nanocarriers for such purpose. However, one important issue being frequently neglected regards the development of vehicles for the administration of microbicide nanosystems. In this study, we propose and detail on the development of a nanoparticle-in-film system for the vaginal delivery of the microbicide drug candidate tenofovir. This is an innovative approach that, to our best knowledge, had never been tested for tenofovir. Results, including those from in vivo testing, sustain that the proposed system is safe and holds potential for further development as a vaginal microbicide product.

In Vitro and Ex Vivo Evaluations of Lipid Anti-Cancer Nanoformulations: Insights and Assessment of Bioavailability Enhancement.

Lipid-based nanoformulations have been extensively investigated for improving oral efficacy of plethora of drugs. Chemotherapeutic agents remain a preferred option for effective management of cancer; however, most chemotherapeutic agents suffer from limitation of poor oral bioavailability that is associated with their physicochemical properties. Drug delivery via lipid-based nanosystems possesses strong rational and potential for improving oral bioavailability of such anti-cancer molecules through various mechanisms, viz. improving their gut solubilisation owing to micellization, improving mucosal permeation, improving lymphatic uptake, inhibiting intestinal metabolism and/or inhibiting P-glycoprotein efflux of molecules in the gastrointestinal tract. Various in vitro characterization techniques have been reported in literature that aid in getting insights into mechanisms of lipid-based nanodevices in improving oral efficacy of anti-cancer drugs. The review focuses on different characterization techniques that can be employed for evaluation of lipid-based nanosystems and their role in effective anti-cancer drug delivery.