Assessment of Heavy Metal Contamination and Health Risk Associated with Cultivated Vegetables along Dhaka-Mymensingh Highway, Bangladesh.

The purpose of this research work is to evaluate the degree of eight heavy metals (Fe, Mn, Cu, Zn, Cd, Pb, Cr, and Ni) contamination and health risks of three regularly consumed vegetables (papaya, bottle gourd, and esculent) near one of Bangladesh's busiest roadways, the Dhaka-Mymensingh highway. The heavy metal concentrations in 45 vegetable samples were analyzed using an atomic absorption spectrometer (AAS). These samples were collected from five different sampling sites based on various land use patterns adjacent to the highway. The average concentrations (mg/kg) of Cu, Fe, Mn, Zn, Cr, and Ni were found to be 9.86, 246.8, 16.9, 28.0, 9.02, and 2.02, respectively, for papaya; 14.9, 281.2, 387.6, 49.0, 10.1, and 2.92, respectively, for bottle gourd; and 17.6, 183.4, 107.2, 80.7, 7.98, and 2.34, respectively, for esculent. The mean concentrations of Cr, Zn, and Mn in papaya, bottle gourd, and esculent were higher than the acceptable limit. Correlation analysis revealed a significant positive correlation between Fe-Cu, Zn-Fe, Cu-Fe, and Fe-Zn in papaya; Cu-Zn, Fe-Cr, Zn-Ni, and Cr-Fe in bottle gourd; and Mn-Cr, Mn-Ni, Mn-Fe, and Cr-Ni in esculent, thereby indicating their common anthropogenic sources like agricultural activities, waste from the commercial area, filling station, and vehicular emissions. Health risk assessment through target hazard quotient (THQ) revealed the highest THQ of 9.52 for Cr in bottle gourd, which poses a high non-carcinogenic health risk to the localities upon the intake of these contaminated vegetables. Target cancer risk (TCR) was found to be highest for Cr in papaya (0.013) and bottle gourd (0.014). TCR trends were found for Cr in the following order: bottle gourd > esculent > papaya. This study contributed the greatest concern for both carcinogenic and non-carcinogenic health impacts through ingesting contaminated vegetables.

Assessment of coastal river water quality in Bangladesh: Implications for drinking and irrigation purposes.

Saltwater intrusion in the coastal areas of Bangladesh is a prevalent phenomenon. However, it is not conducive to activities such as irrigation, navigation, fish spawning and shelter, and industrial usage. The present study analyzed 45 water samples collected from 15 locations in coastal areas during three seasons: monsoon, pre-monsoon, and post-monsoon. The aim was to comprehend the seasonal variation in physicochemical parameters, including water temperature, pH, electrical conductivity (EC), salinity, total dissolved solids (TDS), hardness, and concentrations of Na+, K+, Mg2+, Ca2+, Fe2+, HCO3-, PO43-, SO42-, and Cl-. Additionally, parameters essential for agriculture, such as soluble sodium percentage (SSP), sodium absorption ratio (SAR), magnesium absorption ratio (MAR), residual sodium carbonate (RSC), Kelly's ratio (KR), and permeability index (PI), were examined. Their respective values were found to be 63%, 16.83 mg/L, 34.92 mg/L, 145.44 mg/L, 1.28 mg/L, and 89.29%. The integrated water quality index was determined using entropy theory and principal component analysis (PCA). The resulting entropy water quality index (EWQI) and SAR of 49.56% and 63%, respectively, indicated that the samples are suitable for drinking but unsuitable for irrigation. These findings can assist policymakers in implementing the Bangladesh Deltaplan-2100, focusing on sustainable land management, fish cultivation, agricultural production, environmental preservation, water resource management, and environmental protection in the deltaic areas of Bangladesh. This research contributes to a deeper understanding of seasonal variations in the hydrochemistry and water quality of coastal rivers, aiding in the comprehension of salinity intrusion origins, mechanisms, and causes.

Enrichment, sources, and distributions of toxic elements in the farming land's topsoil near a heavily industrialized area of central Bangladesh, and associated risks assessment.

Toxic element accumulation in the surrounding soils of the advanced industry- and agriculture-oriented areas may lead to severe environmental degradation and harmful impact on inhabitants. This work examined the concentration of some concerned toxic elements (Cr, Pb, Cd, Cu, As, and Ni) in the representative topsoil from 10 industrially contaminated sites in central Bangladesh (Narayanganj district) using an Inductively Coupled Plasma Mass Spectrometer concerning the probable ecological and human health risks. The mean concentrations (mg/kg) of the elements were found in the order of Ni (58.1 ± 11.8) > Pb (34.1 ± 14.3) > Cr (32.1 ± 6.77) > Cu (14.5 ± 3.30) > Cd (2.74 ± 1.08) > As (1.49 ± 0.43). The findings pointed out that diversified manmade events enhanced the intensities of elemental contamination through the studied sites. Source analysis showed that Cr, Pb, As, and Cd may originate from industrial wastewater and agricultural activities, whereas Cu and Ni came from natural sources. The geo-accumulation index level for Cd (1.70-3.39) was determined as grade 3 (moderately to strongly polluted), the enrichment factor score for Cd (13.9) fell in the very severe enhanced category (cluster 5), and the highest contamination factor value was found for Cd (15.7). The contamination degree values for all the tested elements signify a moderate to severe contamination grade; conversely, pollution load index levels depicted the nonexistence of elemental pollution. The assessment revealed serious Cd pollution in agricultural soils and moderate to significant potential ecological risk for the rest of the examined toxic elements. Furthermore, hazard index values exceeded the safe exposure levels, indicating that there was potential non-carcinogenic risk in the soils for children and adults. Ingestion exposure had much higher carcinogenic risk values than inhalation and cutaneous exposure, and children are exposed to considerable carcinogenic hazards. Therefore, it is suggested that the harmful practices that expose this farming soil to contaminants should be stopped immediately and effective environment-friendly techniques of waste management and effluent treatment should be employed in the study area.

Risk assessment of bisphenol A (BPA) in Irish meat and meat products.

Bisphenol A (BPA) is a chemical with large-scale applications in the manufacturing of industrial products. Concerns have been raised regarding human exposure to BPA and dietary consumption is the main route of exposure. BPA is recognised as an endocrine disruptor with multiple adverse effects on the reproductive, immune, and nervous systems. This study aimed to conduct a probabilistic risk assessment to evaluate the human health risk based on the raw concentration data (N = 1266) of BPA in non-canned meat and meat products purchased from supermarkets and local butchers in Dublin and the surrounding area. The mean exposure levels for BPA in non-canned meat and meat products, fresh meat, and processed meat products among children were 0.019, 0.0022, and 0.015 µg (kg bw)-1 day-1, respectively. Therefore, simulated human exposures to BPA were far below the EFSA recommended current temporary tolerable daily intake (t-TDI) of 4 µg (kg bw)-1 day-1. However recently, the EFSA has proposed a draft TDI of 0.04 ng (kg bw)-1 day-1 to replace the current t-TDI. Hence, our results indicated potential health concerns as the estimated exposure levels (5th-95th percentile) were below current t-TDI but above draft TDIs. Further investigation into the source of BPA contamination in processed meat products is highly recommended. The research presented here will inform the public, meat producers and processors, and policymakers on potential exposure to BPA.

Development of a fabricated first-flush rainwater harvested technology to meet up the freshwater scarcity in a South Asian megacity, Dhaka, Bangladesh.

The scarcity of freshwater in most of the megacities in the world is an important concern. In this regard, scientifically harvested rainwater could provide an effective measure to this crisis. In this attempt, we developed a cost-effective sensor-based automated first-flush rainwater harvesting system (RHS) to improve the freshwater scarcity and economic development of megacities like Dhaka, Bangladesh. To investigate the performance of the developed system, a suit of representative rainwater samples was systematically collected, preserved, and assessed between the months of July-December 2021 for water quality parameters such as physicochemical (pH, EC, TDS, DO, hardness, and alkalinity), anions (F-, Cl-, NO2 -, NO3 -, Br-, and SO4 2-), elemental (Ca, Mg, Cr, As, Cd, Hg, Pb, Be, Ni, Se, and Fe), and microbial contamination analysis. A Multiparameter digital meter and a titrimetric method were employed for measuring the physicochemical properties whereas elemental concentration was detected using an inductively coupled plasma-mass spectrometer and atomic absorption spectrometer. The changes in microbial contamination in the preserved rainwater were investigated from time to time during the whole experimental period. The findings showed that the mean pH (6.90) and concentrations (mg/L) of other concerning parameters such as TDS (15.5), DO (7.26), hardness (14.9), Cl- (3.59), NO3 - (4.84), SO4 2- (4.62), Fe (<0.2), Cr (0.086 µg/L), As (0.224 µg/L), Cd (0.260 µg/L), Hg (0.270 µg/L), and Pb (5.530 µg/L) in the harvested rainwater samples were below the WHO drinking water guidelines and literature data implying that the harvested rainwater derived from the developed RHS is completely safe for drinking and other uses even in respect to the microbial contamination (total bacterial counts: 0-15 CFU/mL, and total and fecal coliform less than 1.8 MPN/100 mL) for long storage. Hence, this technology has a huge opportunity to mitigate safe freshwater scarcity and groundwater depletion issues, especially in megacities such as Dhaka, Bangladesh.

Spatial distribution, water quality, human health risk assessment, and origin of heavy metals in groundwater and seawater around the ship-breaking area of Bangladesh.

The concentrations of eleven heavy metals (Pb, Cd, Cr, Fe, Mn, Zn, Cu, Ni, Co, As, and Ag) were assessed in both groundwater and seawater collected from the ship-breaking industrial area of Bangladesh using an atomic absorption spectrometer. The investigation aimed to estimate the water quality and pollution level employing several indices, and its associated health risks for the first time in that area. This study found that Cd, Cr, Fe, Pb, Mn, and Ni were higher in both groundwater and seawater compared with WHO standards. Based on the WQI (water quality index) and EWQI (entropy water quality index) classifications, the quality of most of the groundwater is extremely poor or unsuitable for drinking purposes. Furthermore, the HPI (heavy metal pollution index), HEI (heavy metal evaluation index), and CD (degree of contamination) values of most groundwater and all seawater samples exhibit a higher degree of pollution. In addition, the results of NI (Nemerow pollution index) come to an end that both groundwater and seawater in the study area are mostly polluted by Fe, Mn, Pb, Cr, and Cd. Although the HI (hazard quotient index) values of almost all studied heavy metals in both cases of adults and children are within the safe limit, the HI value of Cr for an adult is near the threshold limit and the maximum HI value of Cr for children exceeds this limit. The carcinogenic risk reveals that Cr, Pb, As, and Cd produce detrimental effects on local people through the direct ingestion of groundwater. The pollution source is identified using principal component analysis and a Pearson correlation matrix as being primarily anthropogenic and attributed to intensive ship-breaking activities or other industries in the area.

Assessment of microplastics pollution in aquatic species (fish, crab, and snail), water, and sediment from the Buriganga River, Bangladesh: An ecological risk appraisals.

Current work focus on microplastic (MPs) occurrence in the water, sediment, and aquatic species (fish, crab, and snail) of the Buriganga River, Bangladesh, with an ecological risk assessment perspective. It also includes the distribution of MPs in different river ecosystem segments and the presence of heavy metal (loid)s (HMs) in water, sediments, and MPs surface. The MPs were inspected by stereomicroscope to identify the shapes, color, and size, and Fourier transform infrared (FTIR) spectroscopy was used to characterize polymer types. The samples concentration of four HMs viz., As, Cd, Cr, and Pb were determined by atomic absorption spectrometry (AAS). The possible MPs content in water, sediment, fish, crab, and snail were varied from 0.250 to 0.117 MPs/mL, 3.5-8.17 MPs/g, 0.65-3.82 MPs/g, 3.75-4.28 MPs/g, and 0.84-1.12 MPs/g, respectively. Fibers and fragments were the most dominant shape, less than 0.5 mm was dominant in size, and blue was the dominant color. In the evaluation of the chemical composition of MPs in water, sediment, fish, snail, and crab samples, Polyethylene terephthalate (PETE), Ethylene-vinyl acetate (EVA), High-density polyethylene (HDPE), Acrylonitrile butadiene styrene (ABS), Cellulose acetate (CA), and Nylon were identified. Regarding HMs load, the river demonstrated a highly polluted environment following the abundance pattern Cr > Pb > As>Cd. SEM-EDAX of MPs was conducted to investigate the surface MP's surface and elemental composition. It reveals that the MPs surface has characteristic flakes, cracks, and adhering particles along with Si, K, Au, C, and O on the surface studied MPs. There is no significant relationship found among the ecosystem segments. However, Ompok bimaculatus species show a negative relationship of MPs distribution with water and sediment. Moreover, according to the ecological risk of MPs pollution in the Buriganga River, it was in category-I, indicating considerable pollution load due to the presence of MPs.

Reconciling the geogenic and non-crustal origins of elements in an Indo-Bangla transboundary river, Atrai: Pollution status, sediment quality, and preliminary risk assessment.

This study has been conducted on an anthropogenically less influenced transboundary river (Atrai: Indo-Bangladesh) to comprehend the inherent geochemistry and identify potential elemental sources. In doing so, across the Bangladeshi portion, 30 river-bed samples were culled and studied by neutron activation analysis to quantify the abundances of 15 geochemically and toxicologically significant elementals (Na, Al, K, Ti, Cr, Mn, Co, Zn, As, Rb, Sb, Cs, Ba, Th, and U). The results revealed that the mean concentrations (µg/g) of Rb (154.6), Cs (7.53), Th (20.90), and U (4.88) were 1.5-2.0 times higher than crustal values. Besides, geo-environmental indices revealed 'uncontaminated to moderately contaminated' pollution status with minor enrichment or contamination for Rb, Th, Sb, U, and Cs, relatively concentrated in the mid-to-downstream zone possessed geogenic and non-crustal origins. The positive matrix factorization and other statistical approaches revealed predominant geogenic enrichment of Na, K, Al, Ti, Zn, Cs, Rb, As, Th, and U from differential mineralogical compositions via weathering, elemental fractionations, and biogeochemical mobilization. Contrariwise, several anthropogenic sources (for Cr, Sb, Co, Mn, Th) were also ascertained in the vicinity of Atari River. However, sediment characterization based on SQG threshold values manifested that Cr and Mn possess rare biological effects on local aquatic organisms. Nevertheless, SQGs-based and ecological risk indices invoked minor to no potential ecotoxicological intimidations for the considered metal(oid)s (Cr, Mn, Co, Zn, As, and Sb). Hence, this study manifested the usefulness of a less anthropogenically affected river to reckon geogenic and non-crustal elemental origins in the compounded riverine sediment.

Human health risk assessment of bisphenol A (BPA) through meat products.

Meat and meat products are often consumed in our daily diet, providing essential nutrients. Contamination by chemical hazards, including bisphenol A (BPA) in meat products, is a concern and is continuously monitored. BPA is well-known for its endocrine-disrupting properties, which may cause potential toxicological effects on reproductive, nervous, and immune systems. Dietary consumption is the main route of BPA exposure, and meat products are a major contributor. BPA exposure from meat consumption is the focus of this review. This review found that BPA has been widely detected in canned and non-canned meat products. BPA in canned meat is assumed to be predominantly from migration from can coatings. Relatively low levels are observed in non-canned products, and the source of contamination in these products has yet to be definitively identified. A recent European Food Safety Authority (EFSA) draft opinion has proposed to lower the tolerable daily intake of BPA from 4 µg kg body weight (bw)-1 day-1 to 0.04 ng kg body weight (bw)-1 day-1, therefore potential health risks need to be addressed. This review has investigated potential contamination at the farm, industrial processes, and retail levels. Data gaps in the literature are also identified to improve future food safety in the meat industry. Also, a unified risk assessment strategy has been proposed. Further understanding of BPA migration in meat products is needed as a part of the exposure assessment to reduce potential risk, and more data on the dose-response relationship will help comprehend potential adverse health effects of BPA on humans. This research will inform the public, meat producers and processing industry, and policymakers on potential exposure to BPA and risk reduction measures, thus, ensuring food safety.

Mechanism of arsenic enrichment and mobilization in groundwater from southeastern Bangladesh: Water quality and preliminary health risks assessment.

To understand the mechanistic pathway of arsenic (As) enrichment and mobilization in groundwater (southeastern Bangladesh) and to evaluate the water quality as well as associated health risks, a suite of systematically collected groundwater samples (depth: 17-61 m) were analyzed. Arsenic concentrations (µg L-1) in the groundwater samples were ranged from 6 to 581 with a mean value of 199 which is significantly higher than the recommended values. The assessment of water quality using entropy water quality index and irrigation water quality indices revealed that the groundwater in the studied region was not recommended for drinking and irrigation, respectively with few exceptions. Dominant water types in the studied area were Ca-Mg-HCO3, Na-HCO3, and Na-Cl types. Various forms of water-rock interactions, leaching of evaporates, and the confined nature of the aquifer mostly control the hydro-chemical parameters. Fe/Mn bound As are likely to be released in the aquifer through the dissolution of carbonate minerals of Fe/Mn while the higher degree of water-rock interaction and probable oxidation of organic materials helped to elevate As concentration. The probable longer residence time of groundwater guided by topographic slope and the neighboring clayey aquitard govern the As mobilization in the aquifer. Probabilistic health risk assessment revealed that groundwaters from the studied area can cause both non-carcinogenic and carcinogenic health risks.