Potable water production through a low-cost single chamber solar still in north India.

The main aim of this study is to evaluate the performance of a single slope solar still and to assess the effect of nanofluid on its performance. A single basin single slope solar still was designed and fabricated at the Department of Chemical Engineering, IET Lucknow. Its performance was assessed in terms of the yield of potable water. The effect of various climatic parameters was also studied. Al2O3 nanofluid was used to enhance the yield of the solar still. In the presence of nanofluid, the total yield of the solar still improved by 16.6%. Its economic feasibility was analyzed and reported. The portability of the small size of solar stills, its better economics, easy fabrication, and good performance make them very useful for industrial as well as household purposes.

Construction and performance assessment of Recirculating packed bed biofilm reactor (RPBBR) for effective biodegradation of p-cresol from wastewater.

Wastewater containing excess phenolic compounds is considered a major environmental concern due to its adverse impacts on the ecosystem. In this work, an effort has been given to treat the p-cresol from wastewater using Recirculating Packed Bed Biofilm Reactor (RPBBR). The process parameters, namely inoculum dose, pH, and NaCl (w/v) concentration were optimized to enhance the specific growth and obtained to be 14 ml, 7.0, and 1% NaCl (w/100 ml), respectively. Maximum p-cresol removal efficiency of 99.36±0.2% was achieved at 100 mg L-1 of p-cresol. First-order rate constants were found to be 0.70 day-1 and 0.96 day-1 for batch and continuous mode, respectively. The intermediates were analysed using FT-IR and GC-MS analysis. Pseudomonas fluorescens was used to assess bacterial toxicity and observed that the toxicity was reduced in case of treated wastewater. Finally, the performance of continuous RPBBR was better than the batch mode.

Assessment of biodegradation kinetics and mass transfer aspects in attached growth bioreactor for effective treatment of brilliant green dye from wastewater.

In this study, Bacillus licheniformis immobilized with low-density polyethylene (LDPE) was employed to degrade Brilliant Green (BG) dye from wastewater in a packed bed bioreactor (PBBR). Bacterial growth and extracellular polymeric substance (EPS) secretion were also assessed under different concentrations of BG dye. The impacts of external mass transfer resistance on BG biodegradation were also evaluated at different flow rates (0.3-1.2 L/h). A new mass transfer correlation [Formula: see text] was proposed to study the mass transfer aspects in attached-growth bioreactor. The intermediates, namely 3- dimethylamino phenol, benzoic acid, 1-4 benzenediol, and acetaldehyde were identified during the biodegradation of BG and, subsequently degradation pathway was proposed. Han - Levenspiel kinetics parameters µmax and Ks were found to be 0.185 per day and 115 mg/L, respectively. The new insight into mass transfer and kinetics support the design of efficiently attached growth bioreactor to treat a wide range of pollutants.