Development of a cost-effective laser diode-induced fluorescence detection instrument for cyanide detection.

Cyanide is highly toxic to humans and the environment. It is very important to develop an on-site system for the quantitative analysis of cyanide with high sensitivity and reliability. In this study, we developed a cyanide detection system based on the reaction of vaporized cyanide on a glass-fiber filter soaked in a mixture of naphthalene-2,3-dicarboxaldehyde (NDA)-taurine-borate solution. Although the reaction product was stable for at least 3 days at room temperature, the reaction product on the strip was quickly quenched within a few minutes by direct irradiation with 405 nm light. To overcome this problem, we fabricated a simple device designed to detect the fluorescence intensity immediately after inserting a reaction strip into the device. The linearity of the calibration was obtained over a range of 1-100 µM of cyanide with good repeatability. The device is cost-effective (~ $300) and powered by batteries; therefore, it is suitable for the on-site determination of cyanide in crude samples.

A practical method for preparing fluorescent-labeled glycans with a 9-fluorenylmethyl derivative to simplify a fluorimetric HPLC-based analysis.

Analysis of glycans in glycoproteins is often performed by liquid chromatography (LC) separation coupled with fluorescence detection and/or mass spectrometric detection. Enzymatically or chemically released glycans from glycoproteins are usually labeled by reductive amination with a fluorophore reagent. Although labeling techniques based on reductive amination have been well-established as sample preparation methods for fluorometric HPLC-based glycan analysis, they often include time-consuming and tedious purification steps. Here, we reported an alternative fluorescent labeling method based on the synthesis of hydrazone and its reduction using 9-fluorenylmethyl carbazate (Fmoc-hydrazine) as a fluorophore reagent. Using isomaltopentaose and N-glycans from human IgG, we optimized the Fmoc-labeling conditions and purification procedure of Fmoc-labeled N-glycans and applied the optimized method for the analysis of N-glycans released from four glycoproteins (bovine RNase B, human fibrinogen, human α1-acid glycoprotein, and bovine fetuin). The complete workflow for preparation of fluorescent-labeled N-glycans takes a total of 3.5 h and is simple to implement. The method presented here lowers the overall cost of a fluorescently labeled N-glycan and will be practically useful for the screening of disease-related glycans or routine analysis at an early stage of development of biopharmaceuticals.