Bone Volume Assessment Around Immediate Dental Implant in the Esthetic Area with Immediate Tooth-Like Single Crown Provisionalization: A Laser and Computed Tomography 1-Year Retrospective Study.

PURPOSE: To examine the remodeling process of both the soft and hard tissue components of the postextraction socket around immediately loaded dental implants after tooth extraction in maxillary esthetic areas. MATERIALS AND METHODS: Subjects underwent immediate placement of single implants in postextraction sockets without bone grafting, and their immediate provisionalization with custom tooth-like interim crowns were fabricated using digital diagnostic impressions and a dental milling machine. Intraoperative and 1-year follow-up layered scans of the postextraction sockets after implantation were acquired using a 3D optical system. In the short term, subjects underwent computed tomographic scans. Digital impressions for gingival contours, originally stored as STL (standard tessellation language) files, were converted to DICOM (Digital Imaging and Communications in Medicine) files with the implant shoulder working as a referral point, which were then superimposed to 3D radiologic images. The observed volumetric and linear outcomes were measured using a program known as DentaScan. The width of the alveolar crest at the level of the implant shoulder and marginal bone levels were acquired. Nonparametric tests were applied with a level of significance set at P < .01. RESULTS: No failure was reported after a follow-up of 1 year. Little or no inflammation of the treated areas was registered, and there were practically no signs of suppuration. The areas showed a significant reduction in the overall volumes for both soft and bone tissue, with a P value < .0001 from the baseline (0.983 ± 0.172 cm3) to the 1-year survey (0.865 ± 0.156 cm3). If the soft and bone tissue changes were separately evaluated, a significant loss (with a P value < .0001) was registered for only the bone tissues (from 0.434 ± 0.075 to 0.355 ± 0.061 cm3). Moreover, changes in gingival tissue from baseline to the 1-year survey (-0.040 ± 0.067) appeared to be significantly different from the overall volume loss (-0.118 ± 0.083 cm3). A shrinkage in width (-0.5 ± 0.7 mm) was found from baseline (12.6 ± 0.6 mm) to the 1-year follow-up (12.1 ± 0.9 mm). Marginal bone levels were 0.97 ± 0.70 mm and 0.39 ± 0.78 mm, respectively, at the mesial and distal aspects of the implants. CONCLUSIONS: The present analysis suggested that immediately customized provisionalization was effective enough to prevent both volume loss and linear shrinkage at the layers of the treated areas. Moreover, the buccal aspects seemed to be the areas most affected by the loss of volume. The mean loss in width, which amounted to roughly 0.5 mm, appeared to be negligible when compared to the overall width measured before surgery.

Assessment of the alveolar bone loss in fresh socket implant procedures with immediate implant loading via temporary preformed anatomical healing caps: Comparison of two different lengths of the implant collar.

PURPOSES: The aim of the present clinical and radiologic retrospective study was to evaluate alveolar bone remodeling, in terms of alveolar width and peri­implant bone level, two years after immediate implant positioning (with two different collar lengths, 0.8 mm and 2.0 mm) and loading of preformed healing cap. The Null hypothesis, H0 is: there was no difference between the two groups of implants. METHODS: Patients suffering from single-tooth edentulous areas in premolar, cuspid, and incisive areas were treated with fresh-socket implants and immediate preformed anatomical healing caps. Each final crown restoration was fabricated 3 months later. Primary outcomes (related to loss of the alveolar width and peri­implant bone level) and secondary outcomes (testing adverse events, and measuring implant/prosthesis survival) were acquired and analyzed. RESULTS: A two-year retrospective analysis was conducted on 31 patients (19 female and 12 male), who underwent dental implant placement with implants having two different lengths of the collar: group A, 0.8 mm, and group B, 2.0 mm. As for the width of the alveolar crest, there was a negligible loss (less than half a millimeter) reported for both the groups, anyway reaching a statistical significance. Preoperative alveolar widths (9.50±0.67 mm and 9.45±0.90 mm, respectively for groups A and B) were different from the two-year alveolar widths (9.20±0.74 mm and 8.93±0.99 mm, respectively for groups A and B) with p-values ≤ 0.0049. When the marginal bone loss was assessed, significant differences were registered between the two procedure groups (-1.42±0.34 mm for group A and -0.11±0.15 mm for group B with a p-value < 0.0001). CONCLUSIONS: The proper design of a healing abutment was very important to preserve the emergence profile immediately after extraction and implant placement. The length of the implant collar used with an immediate healing abutment appeared to affect the preservation of the alveolar crest with predictable final results.

Bone assessment around the delayed dental implant with and without preformed anatomical caps: A 1-year retrospective case-control study.

PURPOSES: To investigate the amount of first-year peri­implant bone loss and the development of the papillae when delayed dental implants loaded with anatomic cover screw and those underwent conventional healing protocol were compared. METHODS: Edentulous healed sites had undergone delayed implants placement. In the anatomical cap group, patients were treated with a guided tissue healing, tooth-like cross-linkable acrylic resin caps had been immediately screwed on dental implants. The marginal loss of the alveolar bone height 1 year after surgery and Jemt's papillae index were obtained. Non-parametric statistics were performed with a level of significance of 1% RESULTS: Forty patients were included in the present retrospective analysis. After a follow-up of 1 year, none of the 40 included implants showed a failure. The Jemt's papilla index was 1.76±0.44 and 1.34±0.50 respectively for guided tissue healing and conventional healing group, without any significant difference. Within the first year of survey a bone loss of -1.27±0.26 mm for conventional healing treatment showed a statistically significant difference (p-value<0.0001) when it was compared to the negligible of the other group (-0.06±0.31 mm). CONCLUSIONS: A guided healing procedure with preformed caps seemed to give better outcomes regarding marginal bone loss and papilla index than those of conventional abutments.

Volume assessment of the external contour around immediate implant with or without immediate tooth-like crown provisionalization: A digital intraoral scans study.

PURPOSES: To examine differences between immediate and delayed dental implant loading in maxillary aesthetic areas. METHODS: In this retrospective controlled analysis, 43 subjects who underwent immediate placement of the dental implant in a post-extraction socket were ranked into either immediate (24 implants loaded with non-occlusal tooth-like profile provisional prostheses fabricated by virtual diagnostic impressions and an in-office dental milling machine) or delayed group (19 implants loaded with conventional cover screws and secondary intention healing). Intraoperatively and then four months later, scans of the external layers were acquired with an optical scanner. The width of the alveolar crest and Jemt papilla index were acquired. Non-parametric tests were applied with a level of significance set at p < 0.01. RESULTS: In both groups, the volumes and areas showed significant reductions from the baseline to the 4-month survey. Reductions in volume appeared to be statistically different between the two groups (-39±31 mm3 for the immediate and 89 ± 30 mm3 for the delayed group). The final Jemt papilla index appeared significantly different between the immediate (mesial, 2.5 and, distal, 3) and delayed groups (2 for both aspects). CONCLUSIONS: Immediate provisionalization significantly reduced volume loss and area shrinkage at the external layer when data were compared to a delayed rehabilitation strategy.

Bone Assessment in Grafted and Ungrafted Sockets After Dental Implant Placement: A 10-year Follow-up Study.

PURPOSE: The purpose of this study was to compare success and outcomes among implants positioned either in grafted or ungrafted alveoli during 10 years of follow-up. MATERIALS AND METHODS: This retrospective analysis was conducted on data of subjects who underwent tooth extraction and alveolar ridge preservation. Sites, one per patient, were ranked into three groups: postextraction ungrafted alveoli, and postextraction grafted alveoli with either synthetic magnesium-enriched hydroxyapatite or porcine bone. An absorbable collagen sheet was used to completely cover all the sockets. A secondary intention healing was sought for all procedures. Data regarding implant survival and marginal bone loss around implants were gathered until the 10-year follow up. Pairwise comparisons were performed with nonparametric tests, and statistical significance was set at .01. RESULTS: Sixty-three subjects were included: 42 implants (19 and 23 in the magnesium-enriched hydroxyapatite and porcine bone groups, respectively) placed in grafted sites and 21 in nongrafted sites. The success rate of the grafted groups was 88.1% (CI: 78.3% to 97.9%) at the 10-year follow-up. On the other hand, in the ungrafted group, the overall success rate was 85.7% (CI: 70.8% to 100%). Peri-implant marginal bone loss at the 10-year follow-up for the magnesium-enriched hydroxyapatite group was 1.2 (0.7) mm, while for the porcine bone group, it was close to 0. The behavior of the ungrafted group appeared to be significantly different compared with both grafted groups; however, marginal bone levels ranging from 0.1 to 0.4 mm were observed from 3 to 10 years. CONCLUSION: A difference in terms of long-term success rates between grafted and ungrafted sites was not revealed. Bone loss was significantly higher in the magnesium-enriched hydroxyapatite grafted group compared with those in the other groups (without or with other bone substitute material).

Assessment of early-stage optic nerve invasion in retinoblastoma using high-resolution 1.5 Tesla MRI with surface coils: a multicentre, prospective accuracy study with histopathological correlation.

OBJECTIVES: To assess the accuracy of high-resolution (HR) magnetic resonance imaging (MRI) in diagnosing early-stage optic nerve (ON) invasion in a retinoblastoma cohort. METHODS: This IRB-approved, prospective multicenter study included 95 patients (55 boys, 40 girls; mean age, 29 months). 1.5-T MRI was performed using surface coils before enucleation, including spin-echo unenhanced and contrast-enhanced (CE) T1-weighted sequences (slice thickness, 2 mm; pixel size <0.3 × 0.3 mm(2)). Images were read by five neuroradiologists blinded to histopathologic findings. ROC curves were constructed with AUC assessment using a bootstrap method. RESULTS: Histopathology identified 41 eyes without ON invasion and 25 with prelaminar, 18 with intralaminar and 12 with postlaminar invasion. All but one were postoperatively classified as stage I by the International Retinoblastoma Staging System. The accuracy of CE-T1 sequences in identifying ON invasion was limited (AUC = 0.64; 95 % CI, 0.55 - 0.72) and not confirmed for postlaminar invasion diagnosis (AUC = 0.64; 95 % CI, 0.47 - 0.82); high specificities (range, 0.64 - 1) and negative predictive values (range, 0.81 - 0.97) were confirmed. CONCLUSION: HR-MRI with surface coils is recommended to appropriately select retinoblastoma patients eligible for primary enucleation without the risk of IRSS stage II but cannot substitute for pathology in differentiating the first degrees of ON invasion. KEY POINTS: • HR-MRI excludes advanced optic nerve invasion with high negative predictive value. • HR-MRI accurately selects patients eligible for primary enucleation. • Diagnosis of early stages of optic nerve invasion still relies on pathology. • Several physiological MR patterns may mimic optic nerve invasion.