Levels, distribution, childhood exposure assessment, and influencing factors of polybrominated diphenyl ethers (PBDEs) in household dust from nine cities in China.

Household dust is an important source of premature exposure to polybrominated diphenyl ethers (PBDEs), especially for children. In this onsite study, 246 dust samples were collected from 224 households in nine Chinese cities during 2018-2019. Questionnaires were administered to explore the association between household-related information and PBDEs in household dust. The median concentration of Σ12PBDEs in household dust from 9 cities was 138 ng/g (94-227 ng/g), with the arithmetic mean of 240 ± 401 ng/g. Among the nine cities, the highest median concentration of Σ12PBDEs in household dust was found in Mianyang (295.57 ng/g), while the lowest was found in Wuxi (23.15 ng/g). BDE-71 was the most dominant congener, ranging from 42.08 % to 98.15 % of the 12 PBDE congeners among 9 cities. Three potential sources for the indoor environment were Penta-BDE, Octa-BDE commercial products, and photolytic bromine from Deca-BDEs based on the largest contribution (81.24 %). Under the moderate exposure scenario, the exposure levels through ingestion and dermal absorption for children were 7.30 × 10-1 ng/kg BW/day and 3.26 × 10-2 ng/kg BW/day, respectively. Temperature, CO2, years of residence, income, family size, household size, use of computers, heating, use of insecticide, and use of humidifiers were influential factors for PBDE concentrations in household dust. Based on the evidence of the correlation between PBDEs and these household parameters, it can be applied to reduce PBDE concentrations in household dust, which is a basis for controlling PBDEs pollution in Chinese households and protecting population health.

Wind Turbine Blades Using Recycled Carbon Fibers: An Environmental Assessment.

Polymers reinforced with virgin carbon fibers (VCF) are being used to make spar caps of wind turbine (WT) blades and polymers with glass fibers (GF) to make skins of the blade components. Here, we assess the life cycle environmental performance of the hybrid blades with spar caps based on VCF and the shells and shear webs based on RCF (recycled CF) composites (RCF-hybrid). The production of the WT blades and associated reinforced polymers is assumed to occur in Sweden, with their uses and end-of-life management in the European region. The functional unit is equivalent to three blades in an offshore WT with the market incumbent blades solely based on the GF composite or the hybrid option. The RCF-hybrid blades offer 12-89% better environmental performance in nine out of 10 impact categories and 6-26% better in six out of 10 impact categories. The RCF-hybrid blades exhibit optimum environmental performance when the VCF manufacturing facilities are equipped with pollution abatement systems including regenerative thermal oxidizers to reduce ammonia and hydrogen cyanide emissions; spar caps are made using VCF epoxy composites through pultrusion and resin infusion molding, and the blade scrap is mechanically recycled at the end of life. The energy and carbon payback times for the RCF-hybrid blades were found to be 5-13% lower than those of the market incumbents.

Environmental Impact and Environmental Cost Assessment of Methanol Production from wood biomass.

Increasing demand for biofuel production and global competition for the use of natural resources are key factors in finding new and environmentally safe routes for methanol production. In the present study, life cycle assessment was used to analyse the potential environmental impact and environmental cost of a novel methanol production process from wood compared to a conventional processes. Both the novel and the conventional process were divided into three stages: pre-treatment, gasification, and syngas cleaning and methanol synthesis. The environmental impacts were assessed and compared using Simapro 9 (ecoinvent 3.5 database) and the ReCiPe 2016 (World-H) midpoint method. The results, expressed per tonne methanol, showed that the impact categories of global warming potential (GWP) and marine ecotoxicity potential were lower in the novel process in comparison to the conventional process (48.2 kg CO2 eq. vs. 63.1 kg CO2 eq., and 4.55 kg 1,4-DCB vs. 6.35 kg 1,4-DCB respectively). However, the novel process had a higher environmental impact in the pre-treatment stage. The results of the sensitivity analysis showed that the GWP of the novel process increased from 48.2 kg CO2 eq. to 216 kg CO2 eq. due to the replacement of Na2CO3 by K2CO3. The human toxicity impact categories showed significant impact on environmental cost. These findings will help relevant industries to reduce their environmental impact and improve the production efficiency of methanol from wood.

Watershed diffuse pollution dynamics and response to land development assessment with riverine sediments.

Sediment cores can reflect diffuse pollution history due to the accumulation of pollutants over time, therefore, the quantitative relationship between the sedimentation flux of pollutants and diffuse loads can identify the historical change. Sediment cores were collected from two river reaches in a small agricultural watershed (143 km2), and the total nitrogen (TN) and total phosphorus (TP) concentrations were determined. The sediments were dated using 210Pb isotope radioactivity and the TN and TP sedimentation flux was calculated with Constant Rate of Supply (CRS) and Constant Initial Concentration (CIC) models. Watershed loss loads were simulated using the Soil and Water Assessment Tool (SWAT) in the same temporal period. As the similar natural condition in the post-depositional period of sediments, a linear regression model was used to analyze the relationship between TN and TP sedimentation flux and the hindcast model data. The TP sedimentation flux showed a clear positive relationship with its simulated load (R2 = 0.600 and 0.664) using the CRS model, and better reflected long-term diffuse pollution loss dynamics than nitrogen. The impacts of land use change on diffuse pollution loading were identified with the combination of sedimentation flux from different reaches and watershed modeling. During the expansion of paddy land in the lower reach, the difference of TP sedimentation flux between upper and lower reaches narrowed, while gap of TN sedimentation flux increased. Base on the lateral correlations of two sections, the sediment concentration of TP was more reliable for the long term diffuse pollution assessment under land development.

Improving environmental risk assessment of human pharmaceuticals.

This paper presents 10 recommendations for improving the European Medicines Agency's guidance for environmental risk assessment of human pharmaceutical products. The recommendations are based on up-to-date, available science in combination with experiences from other chemical frameworks such as the REACH-legislation for industrial chemicals. The recommendations concern: expanding the scope of the current guideline; requirements to assess the risk for development of antibiotic resistance; jointly performed assessments; refinement of the test proposal; mixture toxicity assessments on active pharmaceutical ingredients with similar modes of action; use of all available ecotoxicity studies; mandatory reviews; increased transparency; inclusion of emission data from production; and a risk management option. We believe that implementation of our recommendations would strengthen the protection of the environment and be beneficial to society. Legislation and guidance documents need to be updated at regular intervals in order to incorporate new knowledge from the scientific community. This is particularly important for regulatory documents concerning pharmaceuticals in the environment since this is a research field that has been growing substantially in the last decades.

Cancer risk assessment of polycyclic aromatic hydrocarbon contaminated soils determined using bioassay-derived levels of benzo[a]pyrene equivalents.

Here we evaluate the excess lifetime cancer risk (ELCR) posed by 10 PAH-contaminated soils using (i) the currently advocated, targeted chemical-specific approach that assumes dose additivity for carcinogenic PAHs and (ii) a bioassay-based approach that employs the in vitro mutagenic activity of the soil fractions to determine levels of benzo[a]pyrene equivalents and, by extension, ELCR. Mutagenic activity results are presented in our companion paper.1 The results show that ELCR values for the PAH-containing fractions, determined using the chemical-specific approach, are generally (i.e., 8 out of 10) greater than those calculated using the bioassay-based approach; most are less than 5-fold greater. Only two chemical-specific ELCR estimates are less than their corresponding bioassay-derived values; differences are less than 10%. The bioassay-based approach, which permits estimation of ELCR without a priori knowledge of mixture composition, proved to be a useful tool to evaluate the chemical-specific approach. The results suggest that ELCR estimates for complex PAH mixtures determined using a targeted, chemical-specific approach are reasonable, albeit conservative. Calculated risk estimates still depend on contentious PEFs and cancer slope factors. Follow-up in vivo mutagenicity assessments will be required to validate the results and their relevance for human health risk assessment of PAH-contaminated soils.

Assessment of PCDD/F source contributions in Baltic Sea sediment core records.

Spatial and temporal trends of sources of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in the Baltic Sea were evaluated by positive matrix factorization (PMF) and principal component analysis (PCA). Sediment cores were sampled at eight coastal, one coastal reference, and six offshore sites covering the northern to the southern Baltic Sea. The cores, which covered the period 1919-2010, were sliced into 2-3 cm disks among which 8-11 disks per core (in total 141 disks) were analyzed for all tetra- through octa-CDD/Fs. Identification and apportionment of PCDD/F sources was carried out using PMF. Five stable model PCDD/F congener patterns were identified, which could be associated with six historically important source types: (i) atmospheric background deposition (ABD), (ii) use and production of penta-chlorophenol (PCP), (iii) use and production of tetra-chlorophenol (TeCP), (iv) high temperature processes (Thermal), (v) hexa-CDD-related sources (HxCDD), and (vi) chlorine-related sources (Chl), all of which were still represented in the surface layers. Overall, the last four decades of the period 1920-2010 have had a substantial influence on the Baltic Sea PCDD/F pollution, with 88 ± 7% of the total amount accumulated during this time. The 1990s was the peak decade for all source types except TeCP, which peaked in the 1980s in the northern Baltic Sea and has still not peaked in the southern part. The combined impact of atmospheric-related emissions (ABD and Thermal) was dominant in the open sea system throughout the study period (1919-2010) and showed a decreasing south to north trend (always >80% in the south and >50% in the north). Accordingly, to further reduce levels of PCDD/Fs in the open Baltic Sea ecosystem, future actions should focus on reducing atmospheric emissions.

Using soil function evaluation in multi-criteria decision analysis for sustainability appraisal of remediation alternatives.

Soil contamination is one of the major threats constraining proper functioning of the soil and thus provision of ecosystem services. Remedial actions typically only address the chemical soil quality by reducing total contaminant concentrations to acceptable levels guided by land use. However, emerging regulatory requirements on soil protection demand a holistic view on soil assessment in remediation projects thus accounting for a variety of soil functions. Such a view would require not only that the contamination concentrations are assessed and attended to, but also that other aspects are taking into account, thus addressing also physical and biological as well as other chemical soil quality indicators (SQIs). This study outlines how soil function assessment can be a part of a holistic sustainability appraisal of remediation alternatives using multi-criteria decision analysis (MCDA). The paper presents a method for practitioners for evaluating the effects of remediation alternatives on selected ecological soil functions using a suggested minimum data set (MDS) containing physical, biological and chemical SQIs. The measured SQIs are transformed into sub-scores by the use of scoring curves, which allows interpretation and the integration of soil quality data into the MCDA framework. The method is demonstrated at a study site (Marieberg, Sweden) and the results give an example of how soil analyses using the suggested MDS can be used for soil function assessment and subsequent input to the MCDA framework.

Exposure assessment at a PCDD/F contaminated site in Sweden--field measurements of exposure media and blood serum analysis.

BACKGROUND, AIM, AND SCOPE: The main pathway for human exposure to the highly toxic polychlorinated-p-dioxins and polychlorinated furans [polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs)] is via dietary intake. Other exposure pathways may, however, be important in close proximity to point sources, such as wood preservation sites, where PCDD/F contaminated chlorophenols (CP) were previously used. In this study, a heavily PCDD/F contaminated CP saw mill site in Sweden was investigated. Human exposure through a broad spectrum of exposure pathways was assessed. Such studies are in demand since the question whether contaminated sites represent a current or future risk can only be answered by detailed site-specific risk assessments. MATERIALS AND METHODS: Sampling of exposure media (soil, air, groundwater, raspberries, carrots, potatoes, grass, milk, eggs, and chicken fodder) was made. Exposure media concentrations and congener distribution patterns were used to investigate the mobilization of PCDD/Fs from soil to the environment and to calculate exposure levels for adults. Blood serum levels from site-exposed and control individuals were also analyzed. RESULTS: Congener distribution patterns at the site were generally dominated by a specific marker congener (1234678-HpCDF), which is highly abundant in the polluted soil. The dioxin toxic equivalents (TEQ) concentrations were notably elevated as compared to national reference samples for most exposure media, and the marker congener was a major contributor to increased TEQ levels. There were also indications of soil-to-air volatilization of tetra- and penta-CDD/Fs. People who participated in the restoration of a contaminated building showed higher levels of 1234678-HpCDF compared to controls, and calculated exposure levels suggest that several site-specific exposure routes may be of importance for the daily intake of PCDD/F. CONCLUSIONS, RECOMMENDATIONS, AND PERSPECTIVES: Despite low mobility of higher chlorinated PCDD/Fs, these contaminants were transferred from the polluted soil to the surroundings and into human tissue. The extent of increased exposure from contaminated sites depends on the PCDD/F source strength of the soil, composition of the pollution, human activities, and dietary patterns of the residents. Impact from the contaminated soil on other exposure media was seen also for areas with low to moderate soil contamination. In the future, not only the levels of PCDD/F soil pollution but also the composition must be considered in risk assessments of contaminated sites.

A multivariate chemical map of industrial chemicals--assessment of various protocols for identification of chemicals of potential concern.

In present study the Industrial chemical map was created, and investigated. Molecular descriptors were calculated for 56072 organic substances from the European inventory of existing commercial chemical substances (EINECS). The resulting multivariate dataset was subjected to principal component analysis (PCA), giving five principal components, mainly reflecting size, hydrophobicity, flexibility, halogenation and electronical properties. It is these five PCs that form the basis of the map of organic, industrial chemicals, the Industrial chemical map. The similarities and diversity in chemical characteristics of the substances in relation to their persistence (P), bioaccumulation (B) and long-range transport potential were then examined, by superimposing five sets of entries obtained from other relevant databases onto the Industrial chemical map. These sets displayed very similar diversity patterns in the map, although with a spread in all five PC vectors. Substances listed by the United Nations Environment Program as persistent organic pollutants (UNEP POPs) were on the other hand clearly grouped with respect to each of the five PCs. Illustrating similarities and differences in chemical properties are one of the strengths of the multivariate data analysis method, and to be able to make predictions of, and investigate new chemicals. Further, the results demonstrate that non-testing methods as read-across, based on molecular similarities, can reduce the requirements to test industrial chemicals, provided that they are applied carefully, in combination with sound chemical knowledge.

Contamination of surface, ground, and drinking water from pharmaceutical production.

Low levels of pharmaceuticals are detected in surface, ground, and drinking water worldwide. Usage and incorrect disposal have been considered the major environmental sources of these microcontaminants. Recent publications, however, suggest that wastewater from drug production can potentially be a source of much higher concentrations in certain locations. The present study investigated the environmental fate of active pharmaceutical ingredients in a major production area for the global bulk drug market. Water samples were taken from a common effluent treatment plant near Hyderabad, India, which receives process water from approximately 90 bulk drug manufacturers. Surface water was analyzed from the recipient stream and from two lakes that are not contaminated by the treatment plant. Water samples were also taken from wells in six nearby villages. The samples were analyzed for the presence of 12 pharmaceuticals with liquid chromatography-mass spectrometry. All wells were determined to be contaminated with drugs. Ciprofloxacin, enoxacin, cetirizine, terbinafine, and citalopram were detected at more than 1 microg/L in several wells. Very high concentrations of ciprofloxacin (14 mg/L) and cetirizine (2.1 mg/L) were found in the effluent of the treatment plant, together with high concentrations of seven additional pharmaceuticals. Very high concentrations of ciprofloxacin (up to 6.5 mg/L), cetirizine (up to 1.2 mg/L), norfloxacin (up to 0.52 mg/L), and enoxacin (up to 0.16 mg/L) were also detected in the two lakes, which clearly shows that the investigated area has additional environmental sources of insufficiently treated industrial waste. Thus, insufficient wastewater management in one of the world's largest centers for bulk drug production leads to unprecedented drug contamination of surface, ground, and drinking water. This raises serious concerns regarding the development of antibiotic resistance, and it creates a major challenge for producers and regulatory agencies to improve the situation.

Model selection and evaluation for risk assessment of dioxin-contaminated sites.

The general European population has a total intake of dioxins and dioxin-like chemicals near the limit recommended by the European Union, making additional exposure above background levels undesirable. For populations living near dioxin-contaminated sites, additional exposure may occur by intake of locally produced food, inhalation of particles, dermal contact with soils, or other exposure pathways. Risk assessment tools are required to estimate risks associated with contaminated sites and to set priorities for site remediation. Here, we review several multimedia models that can be applied as tools to support risk assessment. We then present a strategy to select, apply, evaluate, and adapt a model to address a specific situation. The case study we consider is a risk assessment of generic background dioxin exposure in Sweden, and we compare the predictions with environmental observations and exposure data from Sweden. Arguments are presented for selecting the CalTOX model for this case study. We demonstrate the application, evaluation, and adaptation of the model and discuss the requirements for extending the analysis to conduct risk assessment for subpopulations living near dioxin-contaminated sites.

Environmental risk assessment of antibiotics in the Swedish environment with emphasis on sewage treatment plants.

The potential risks associated with antibiotics present in the Swedish environment were assessed using concentrations found in hospital effluent, and sewage treatment waters and sludge, in combination with data on their environmental effects obtained from the literature. For the aqueous environment, measured environmental concentrations and effect/no observed effect concentration ratios were much lower than one in most cases. The only exceptions, where concentrations of the investigated substances were high enough to pose potential risks, were the concentrations of the two fluoroquinolones, ofloxacin and ciprofloxacin, in the hospital effluent. Treating digested dewatered sludge by heat did not fully eliminate norfloxacin or ciprofloxacin, thus pellets may still contain high amounts of these substances (sub to low mgkg(-1)dw). In leaching tests less than 1% of the amounts of these fluoroquinolones in the sludge or pellets reached the aqueous phase, indicating that their mobility is limited if sludge is used to fertilize soil.

Assessment of the availability of polycyclic aromatic hydrocarbons from gasworks soil using different extraction solvents and techniques.

This study was designed to assess the availability of polycyclic aromatic hydrocarbons (PAHs) present at a gasworks site to different soil remediation techniques. The study examined the effect on PAH availability of using different organic solvents, the degree of pretreatment, and the extraction time. In total, 25 PAHs (with two to six fused rings) and five carbonyl derivatives were measured. The results indicated that the PAHs and their derivatives were bound loosely to the surface of the studied soil and that there were no significant kinetic boundaries associated with the extraction of the PAHs. Furthermore, it was concluded that the studied soil was not suitable for bioremediation, as the concentration of PAHs with low molecular weight were limited. However, pressurized liquid extraction (PLE) with methanol as the solvent extracted 97% of all PAHs and PAH-derivatives, indicating that extraction may be effective as part of a soil remediation technique for old gasworks soils.