Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Mais filtros

Bases de dados
País/Região como assunto
Ano de publicação
Tipo de documento
País de afiliação
Intervalo de ano de publicação
1.
Radiat Prot Dosimetry ; 125(1-4): 289-92, 2007.
Artigo em Inglês | MEDLINE | ID: mdl-17337743

RESUMO

Radiation protection around CERN's high-energy accelerators represents a major challenge due to the presence of complex, mixed radiation fields. Behind thick shielding neutrons dominate and their energy ranges from fractions of eV to about 1 GeV. In this work the response of various portable detectors sensitive to neutrons was studied at CERN's High-Energy Reference Field Facility (CERF). The measurements were carried out with conventional rem counters, which usually cover neutron energies up to 20 MeV, the Thermo WENDI-2, which is specified to measure neutrons up to several GeV, and a tissue-equivalent proportional counter. The experimentally determined neutron dose equivalent results were compared with Monte Carlo (MC) simulations. Based on these studies field calibration factors can be determined, which result in a more reliable estimate of H*(10) in an unknown, but presumably similar high-energy field around an accelerator than a calibration factor determined in a radiation field of a reference neutron source.


Assuntos
Exposição Ambiental/análise , Modelos Teóricos , Aceleradores de Partículas/instrumentação , Monitoramento de Radiação/instrumentação , Proteção Radiológica/instrumentação , Simulação por Computador , Desenho de Equipamento , Análise de Falha de Equipamento , Internacionalidade , Método de Monte Carlo , Nêutrons , Doses de Radiação , Reprodutibilidade dos Testes , Sensibilidade e Especificidade , Suíça
2.
Radiat Prot Dosimetry ; 116(1-4 Pt 2): 6-11, 2005.
Artigo em Inglês | MEDLINE | ID: mdl-16604585

RESUMO

Samples of materials which will be used in the LHC machine for shielding and construction components were irradiated in the stray radiation field of the CERN-EU high-energy reference field facility. After irradiation, the specific activities induced in the various samples were analysed with a high-precision gamma spectrometer at various cooling times, allowing identification of isotopes with a wide range of half-lives. Furthermore, the irradiation experiment was simulated in detail with the FLUKA Monte Carlo code. A comparison of measured and calculated specific activities shows good agreement, supporting the use of FLUKA for estimating the level of induced activity in the LHC.


Assuntos
Materiais de Construção/análise , Transferência Linear de Energia , Modelos Teóricos , Proteção Radiológica/instrumentação , Proteção Radiológica/métodos , Radioisótopos/análise , Radiometria/métodos , Benchmarking/métodos , Simulação por Computador , Materiais de Construção/normas , Teste de Materiais/métodos , Teste de Materiais/normas , Método de Monte Carlo , Aceleradores de Partículas/instrumentação , Doses de Radiação , Proteção Radiológica/normas , Radiometria/instrumentação , Radiometria/normas , Reprodutibilidade dos Testes , Espalhamento de Radiação , Sensibilidade e Especificidade , Suíça
3.
Radiat Prot Dosimetry ; 116(1-4 Pt 2): 12-5, 2005.
Artigo em Inglês | MEDLINE | ID: mdl-16604586

RESUMO

A new method to estimate remanent dose rates, to be used with the Monte Carlo code FLUKA, was benchmarked against measurements from an experiment that was performed at the CERN-EU high-energy reference field facility. An extensive collection of samples of different materials were placed downstream of, and laterally to, a copper target, intercepting a positively charged mixed hadron beam with a momentum of 120 GeV c(-1). Emphasis was put on the reduction of uncertainties by taking measures such as careful monitoring of the irradiation parameters, using different instruments to measure dose rates, adopting detailed elemental analyses of the irradiated materials and making detailed simulations of the irradiation experiment. The measured and calculated dose rates are in good agreement.


Assuntos
Materiais de Construção/análise , Transferência Linear de Energia , Modelos Teóricos , Proteção Radiológica/instrumentação , Proteção Radiológica/métodos , Radioisótopos/análise , Radiometria/métodos , Benchmarking/métodos , Simulação por Computador , Materiais de Construção/normas , Teste de Materiais/métodos , Teste de Materiais/normas , Método de Monte Carlo , Aceleradores de Partículas/instrumentação , Doses de Radiação , Proteção Radiológica/normas , Radiometria/instrumentação , Radiometria/normas , Reprodutibilidade dos Testes , Espalhamento de Radiação , Sensibilidade e Especificidade , Suíça
4.
Radiat Prot Dosimetry ; 116(1-4 Pt 2): 170-4, 2005.
Artigo em Inglês | MEDLINE | ID: mdl-16604621

RESUMO

Monitoring of the radiation environment is one of the key tasks in operating a high-energy accelerator such as the Large Hadron Collider (LHC). The radiation fields consist of neutrons, charged hadrons as well as photons and electrons with energy spectra extending from those of thermal neutrons up to several hundreds of GeV. The requirements for measuring the dose equivalent in such a field are different from standard uses and it is thus necessary to investigate the response of monitoring devices thoroughly before the implementation of a monitoring system can be conducted. For the LHC, it is currently foreseen to install argon- and hydrogen-filled high-pressure ionisation chambers as radiation monitors of mixed fields. So far their response to these fields was poorly understood and, therefore, further investigation was necessary to prove that they can serve their function well enough. In this study, ionisation chambers of type IG5 (Centronic Ltd) were characterised by simulating their response functions by means of detailed FLUKA calculations as well as by calibration measurements for photons and neutrons at fixed energies. The latter results were used to obtain a better understanding and validation of the FLUKA simulations. Tests were also conducted at the CERF facility at CERN in order to compare the results with simulations of the response in a mixed radiation field. It is demonstrated that these detectors can be characterised sufficiently enough to serve their function as radiation monitors for the LHC.


Assuntos
Desenho Assistido por Computador , Aceleradores de Partículas/instrumentação , Monitoramento de Radiação/instrumentação , Proteção Radiológica/instrumentação , Desenho de Equipamento , Análise de Falha de Equipamento , Método de Monte Carlo , Doses de Radiação , Monitoramento de Radiação/métodos , Proteção Radiológica/métodos , Reprodutibilidade dos Testes , Espalhamento de Radiação , Sensibilidade e Especificidade
SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA