Investigating weighted fishing hooks for seabird bycatch mitigation.

Fisheries bycatch threatens the viability of some seabird populations and reduces fishing efficiency. Albatross bycatch in a US North Pacific tuna longline fishery has increased over the past decade and now exceeds 1000 annual captures. Seabirds interacting with this fishery reach hooks at depths up to 1 m. A branchline weight's mass and distance from the hook affect seabird catch rates. We conducted experimental fishing to compare the commercial viability of a weighted hook relative to conventional gear with weights attached 0.75 m from the hook. We used a Bayesian random effects meta-analytic regression modelling approach to estimate pooled expected species-specific log relative risk of capture on conventional versus experimental gear. There was a significant 53% (95% HDI: - 75 to - 25%) decrease in retained species' catch rates on experimental hooks, indicating an unacceptable economic cost, and no significant effect for discarded species. Using a Bayesian general linear mixed regression modelling approach, experimental hooks sank to 85 cm ca. 1.4 times (95% HDI: 1.37-1.48) faster than control hooks. Given their potential to reduce seabird catch rates, eliminate safety risks from bite-offs and facilitate robust compliance monitoring, it is a priority to find a weighted hook design with acceptable catch rates.

Influence of leg length inequalities on pelvis and spine in patients with total hip arthroplasty.

BACKGROUND: Leg length inequalities (LLIs) are a common finding in patients with a total hip arthroplasty (THA). Therefore, we compared the effects of simulated LLIs in patients with total hip arthroplasty (THA) with a matched control group. RESEARCH QUESTION: Do LLIs lead to different effects on the musculoskeletal apparatus of patients with a THA then in a control group? METHODS: In 99 patients with a THA the effects of simulated LLIs were compared to a matched control group of 101 subjects without a hip arthroplasty. First, we compared methods for LLI quantification (tape measurements, pelvic x- ray and rasterstereography). Second, the effects of simulated LLIs on the spine and pelvis were evaluated in both groups using surface topography. LLIs of 5, 10, 15, 20 and 30 mm were simulated on both sides with a simulation platform. The changes of pelvic position (pelvic obliquity & pelvic torsion) and the effects on spinal posture (surface rotation & lateral deviation) were measured and analysed using a surface topography system. RESULTS: Mean LLI measured with a tape was 0.9 mm (SD +/- 14.8). Mean pelvic obliquity measured on x-rays was 1.2 mm (SD +/- 11.6) and with surface topography 0.9 mm (SD +/- 7.9). Simulated LLIs resulted in significant changes of pelvic position and spinal posture in the patient and control group. Interestingly, our study showed that simulated LLIs lead to greater changes in pelvic position (p<0.05) in patients with a THA. SIGNIFICANCE: This is the first study to demonstrate that LLIs might have a greater impact on the pelvic position of THA patients than in native hips, which could indicate that LLIs do need to be compensated differently in patients with THA than in patients without a THA.

Dynamic evaluation of simulated leg length inequalities and their effects on the musculoskeletal apparatus.

BACKGROUND: Leg length inequalities (LLI) are a common problem in medicine. So far, the diagnosis and treatment are performed under static conditions. Surface Topography (ST) is an optical, non-invasive technique that uses the principle of triangulation to measure spinal posture and pelvic position. This technique offers the opportunity to detect and treat LLIs and their effects under dynamic conditions. RESEARCH: question The aim of the study is to show that ST can detect simulated LLIs under dynamic conditions and to prove if there are differences between the effects on the human body under static and dynamic conditions. METHODS: In the clinical study a total of 30 test subjects were examined with a ST measuring device. LLIs (1 to 4 cm) were simulated using a custom- built sandal and insoles of various thickness. The pelvic obliquity, the surface rotation and lateral deviation of the spine were detected on a treadmill under static and dynamic conditions (3 km/h). RESULTS: Under static and dynamic conditions LLIs lead to a significant increase of all measured parameters. The pelvic obliquity reaches a significant level of p < 0.0001 under static and p = 0.0001-0.0421 under dynamic conditions. However, for all examined parameters the magnitudes of the parameters under dynamic conditions were smaller than under static conditions. SIGNIFICANCE: The study showed that simulated LLIs also have a significant effect on the human pelvis and spine under dynamic conditions, but with a smaller magnitude than under static conditions. The human individuum is a dynamic one. Because of that, for the future it should be of great interest to use dynamic measurements to detect and treat LLIs to provide an over correction of LLIs.

Cone beam CT in assessment of tibial bone defect healing: an animal study.

RATIONALE AND OBJECTIVES: To evaluate cone beam computed tomography (CBCT) for monitoring of tibial bone defect healing in comparison to histopathological findings. MATERIALS AND METHODS: Circumscribed tibial bone defects were created in 16 mini-pigs and imaging of the tibia was performed on day 42 using a modern CBCT scanner with flat panel detector (PaX-Duo3D, Vatech, Korea). The extent of osseous consolidation including remaining calcium phosphate granules was measured quantitatively by a CBCT volumetry tool using commercially available software (Osirix Imaging software, Pixmeo, Geneva, Switzerland). Volumes of the entire defect (including all pixels), areas of osseous consolidation (density values >2350) and nonmineralized areas (density values <2350) of the defect were determined. The extent of bone regeneration was determined and correlated with the histomorphometrical reference standard. Independently, a visual semiquantitative CBCT-score was applied (4-point scale) to assess bone defect healing. RESULTS: The extent of osseous consolidation in CBCT volumetry ranged from 14% to 92% (mean, 63.4 ± 17.6%). There was a significant positive correlation between histologically visible newly formed bone and the extent of bone regeneration on CBCT volumetry (r = 0.74-0.79, P < .001). The visual score matched with the volumetric results in 75% of the cases. CONCLUSION: CBCT volumetry allows for reliable, noninvasive quantitative monitoring of bone defect healing and correlates significantly with histological findings. CBCT is a promising technique for imaging of peripheral bones suggesting further evaluation in clinical trials.

Quantitative assessment of bone defect healing by multidetector CT in a pig model.

OBJECTIVE: To evaluate multidetector CT volumetry in the assessment of bone defect healing in comparison to histopathological findings in an animal model. MATERIALS AND METHODS: In 16 mini-pigs, a circumscribed tibial bone defect was created. Multidetector CT (MDCT) of the tibia was performed on a 64-row scanner 42 days after the operation. The extent of bone healing was estimated quantitatively by MDCT volumetry using a commercially available software programme (syngo Volume, Siemens, Germany).The volume of the entire defect (including all pixels from -100 to 3,000 HU), the nonconsolidated areas (-100 to 500 HU), and areas of osseous consolidation (500 to 3,000 HU) were assessed and the extent of consolidation was calculated. Histomorphometry served as the reference standard. RESULTS: The extent of osseous consolidation in MDCT volumetry ranged from 19 to 92% (mean 65.4 ± 18.5%). There was a significant correlation between histologically visible newly formed bone and the extent of osseous consolidation on MDCT volumetry (r = 0.82, P < 0.0001). A significant negative correlation was detected between osseous consolidation on MDCT and histological areas of persisting defect (r = -0.9, P < 0.0001). CONCLUSION: MDCT volumetry is a promising tool for noninvasive monitoring of bone healing, showing excellent correlation with histomorphometry.

Sea-level assessment of dynamic cerebral autoregulation predicts susceptibility to acute mountain sickness at high altitude.

BACKGROUND AND PURPOSE: Dynamic cerebral autoregulation is impaired in subjects who develop acute mountain sickness (AMS), a neurological disorder characterized by headache. The present study examined if the normoxic sea-level measurement of dynamic cerebral autoregulation would predict subsequent susceptibility to AMS during rapid ascent to terrestrial high altitude. METHODS: A dynamic cerebral autoregulation index was determined in 18 subjects at sea level from continuous recordings of middle cerebral artery blood flow velocity (Doppler ultrasonography) and arterial blood pressure (finger photoplethysmography) after recovery from transiently induced hypotension. Six hours after passive ascent to 3800 m (Mt Elbrus, Russia), the Lake Louise and Environmental Symptoms Cerebral Symptoms questionnaires were used to assess AMS. RESULTS: AMS scores increased markedly at high-altitude (Lake Louise: +3±2 points, P=0.001 and Environmental Symptoms Cerebral Symptoms: +0.6±0.9 points, P=0.0003 versus sea level). Inverse relationships were observed between the sea-level autoregulation index score and the high-altitude-induced increases in the Lake Louise (r=-0.62, P=0.007) and Environmental Symptoms Cerebral Symptoms (r=-0.78, P=0.01) scores. One subject with a history of high-altitude pulmonary and cerebral edema presented with the lowest sea-level autoregulation index score (3.7 versus group: 6.2±1.0 points) and later developed high-altitude cerebral edema at 4800 m during the summit bid. CONCLUSIONS: These findings suggest that a lower baseline autoregulation index may be considered a potential risk factor for AMS. This laboratory measurement may prove a useful screening tool for the expedition doctor when considering targeted pharmacological prophylaxis in individuals deemed "AMS-susceptible."

Negative predictive value of normal adenosine-stress cardiac MRI in the assessment of coronary artery disease and correlation with semiquantitative perfusion analysis.

PURPOSE: To prospectively determine the negative predictive value of normal adenosine stress cardiac MR (CMR) in routine patients referred for evaluation of coronary artery disease (CAD), predominantly with intermediate to high pretest risk. MATERIALS AND METHODS: Consecutive patients referred for coronary angiography were examined in a 1.5 Tesla whole-body scanner before catheterization. A total of 158 patients with normal CMR on qualitative assessment were included, and semiquantitative perfusion analysis was performed. Significant CAD was regarded as luminal narrowing of >or=70% in coronary angiography. RESULTS: In the 158 study patients, negative predictive value of normal adenosine-stress CMR for significant CAD was 96.2% (for stenosis >or=90%: 98.1%). True-negative and false-negative patients were comparable regarding clinical presentation, risk factors, and CMR findings. Semiquantitative perfusion analysis gave significantly prolonged arrival time index and peak time index in the false-negative group. Using cutoff values >1.8 for arrival time index or >1.2 for peak time index, the CMR negative predictive value increased to 98.7% (for stenosis >or=90%: to 100%). CONCLUSION: The very high negative predictive value for CAD supports CMR-based decision making for the indication to coronary angiography. Semiquantitative perfusion analysis seems promising to identify the small group of CAD patients not detectable by qualitative CMR assessment.