Imaging of brain clearance pathways via MRI assessment of the glymphatic system.

Glymphatic clearance dysfunction may play an important role in a variety of neurodegenerative diseases and the progression of ageing. However, in vivo imaging of the glymphatic system is challenging. In this study, we describe an MRI method based on chemical exchange saturation transfer (CEST) of the Angiopep-2 probe to visualize the clearance function of the glymphatic system. We injected rats with Angiopep-2 via the tail vein and performed in vivo MRI at 7 T to track differences in Angiopep-2 signal changes; we then applied the same principles in a bilateral deep cervical lymph node ligation rat model and in ageing rats. We demonstrated the feasibility of Angiopep-2 CEST for visualizing the clearance function of the glymphatic system. Finally, a pathological assessment was performed. Within the model group, the deep cervical lymph node ligation group and the ageing group showed higher CEST signal than the control group. We conclude that this new MRI method can visualize clearance in the glymphatic system.

Bisphenol A degradation by chlorine dioxide (ClO2) and S(IV)/ClO2 process: Mechanism, degradation pathways and toxicity assessment.

Recently, it has been reported that chlorine dioxide (ClO2) and (bi)sulfite/ClO2 showed excellent performance in micropollutant removal from water; however, the degradation mechanisms and application boundaries of the two system have not been identified. In this study, bisphenol A (BPA) was chosen as the target contaminant to give multiple comparisons of ClO2 and S(IV)/ClO2 process regarding the degradation performance of contaminant, generation of reactive species, transformation of products and toxicity variation. Both ClO2 and S(IV)/ClO2 can degrade BPA within 3 min. The BPA degradation mechanism was mainly based on direct oxidation in ClO2 process while it was attributed to radicals (especially SO4·-) generation in S(IV)/ClO2 process. Meanwhile, the effect of pH and coexisting substances (Cl-, Br-, HCO3- and HA) were evaluated. It was found that ClO2 preferred the neutral and alkaline condition and S(IV)/ClO2 preferred the acidic condition for BPA degradation. An unexpected speed-up of BPA degradation was observed in ClO2 process in the presence of Br-, HCO3- and HA. In addition, the intermediate products in BPA degradation were identified. Three exclusive products were found in ClO2 process, in which p-benzoquinone was considered to be the reason of the acute toxicity increase in ClO2 process.

Single and combined toxicity assessment of primary or UV-aged microplastics and adsorbed organic pollutants on microalga Chlorella pyrenoidosa.

Microplastics (MPs), an emerging pollutant, have been increasingly raising concern due to the potential impacts on aquatic organisms. Moreover, the environmental aged MPs always exhibit different environmental behavior and interaction effect with organic pollutants from virgin MPs. In this work, the single and combined toxicity impact on Chlorella pyrenoidosa, a symbiont representative, has been investigated between MPs (e.g., polyamide microplastic (PA6), 75 µm) and organic pollutants (e.g., sulfamethoxazole (SMX) and dicamba (DCB)). Growth inhibition, chlorophyll accumulation, superoxide dismutase (SOD), malondialdehyde (MDA), and catalase (CAT) were investigated with the primary or UV-aged PA6. Above 0.5 g/L PA6 (primary or UV-aged) inhibited cell growth and chlorophyll accumulation after 96 h cultivation as compared with the control. Besides, the inhibition impacts have enhanced as the UV-aging time extending in the single PA6 systems. The algae growth inhibition rate after 96 h cultivation in both the system i.e., single (PA6: 6.9%) and combined (PA6-SMX: 14.2%, PA6-DCB: 14.9%) was slightly lower than that of exposing in organic pollutants alone (SMX: 23.9%, DCB: 25.0%), while the chl. b concentration in 60 days UV-aged PA6 combined with SMX (1.19 mg/L) or DCB (1.40 mg/L) systems were higher than in single SMX (1.04 mg/L) or DCB (1.33 mg/L) system. In addition, there were several differences of the cellular oxidative stress in the combined system of SMX and DCB. Specially, it was not noticeable of three enzymatic activities for SMX exposing in the presence of primary or UV-aged PA6. While SOD, CAT, and MDA activities was obviously increasing after exposing in PA6 and DCB combined system, indicating the significant synergistic effect on algae cells damage. This research verified the remarkable combined toxicity between UV-aged MPs and organic pollutants on microalgae.

An Integrated Quantitative Risk Assessment Method for Underground Engineering Fires.

Fires are one of the main disasters in underground engineering. In order to comprehensively describe and evaluate the risk of underground engineering fires, this study proposes a UEF risk assessment method based on EPB-FBN. Firstly, based on the EPB model, the static and dynamic information of the fire, such as the cause, occurrence, hazard, product, consequence, and emergency rescue, was analyzed. An EPB model of underground engineering fires was established, and the EPB model was transformed into a BN structure through the conversion rules. Secondly, a fuzzy number was used to describe the state of UEF variable nodes, and a fuzzy conditional probability table was established to describe the uncertain logical relationship between UEF nodes. In order to make full use of the expert knowledge and empirical data, the probability was divided into intervals, and a triangulated fuzzy number was used to represent the linguistic variables judged by experts. The α-weighted valuation method was used for de-fuzzification, and the exact conditional probability table parameters were obtained. Through fuzzy Bayesian inference, the key risk factors can be identified, the sensitivity value of key factors can be calculated, and the maximum risk chain can be found in the case of known evidence. Finally, the method was applied to the deductive analysis of three scenarios. The results show that the model can provide realistic analysis ideas for fire safety evaluation and emergency management of underground engineering. The proposed EPB risk assessment model provides a new perspective for the analysis of UEF accidents and contributes to the ongoing development of UEF research.

Energy balance assessment on chicken manure for biogas production in Rabat-Salé-Zemmour-Zaïr of Morocco.

Chicken manure management has grabbed significant attention in Morocco due to the increasing demand on chicken and eggs. Bioconversion of chicken manure to biogas could reduce the chicken manure amount as well as generate clean energy. To evaluate the feasibility of converting chicken manure to biogas in terms of energy gain, the energy balance of the chicken manure for biogas production in the region of Rabat-Salé-Zemmour-Zaïr of Morocco has been investigated. The result showed that there was an energy gain of 1350 MJ for per tonne of dry chicken manure was converted to biogas. The energy gain increased to 3996 MJ/tonne of dry chicken manure when the wheat straw was added to co-digest with chicken manure. With consideration of converting the obtained biogas for electricity generation, there was extra electricity for sale after subtracting the electricity consumed inside the poultry industry. Comparing with co-firing, pyrolysis, and gasification, chicken manure anaerobic digestion was superior in terms of energy gain.

Improved photocatalytic conversion of high-concentration ammonia in water by low-cost Cu/TiO2 and its mechanism study.

Platinized TiO2 (Pt/TiO2) as a benchmark photocatalyst shows superior photocatalytic performance in environmental remediation. In order to reduce the cost of photocatalyst for practical use, a series of cooper loaded TiO2 (Cu/TiO2) photocatalysts were prepared by photoreduction method and compared with pure TiO2 and Pt/TiO2 in terms of overall ammonia conversion efficiency and selective oxidation. The as-prepared Cu/TiO2 samples were characterized and analyzed by physicochemical instrumental measurements. The results show that about 60% Cu2+ ions in suspension can be photodeposited onto the surface of TiO2 under UV light irradiation, and is mainly composed by a mixture of Cu/Cu+. The Cu/P25 (0.3 wt% Cu) sample was screened out as the optimal photocatalyst, via photoilluminance spectra analysis and photocatalytic oxidation of ammonia. It shows even better performance compared to Pt/TiO2 in the oxidation of high concentration of ammonia, due to the strong coordination effect by Cu(NH3)n complex formation. Through Electron Spin Resonance (EPR) analysis, and free radical suppression experiments, the active oxidative species account for ammonia oxidation and selective product generation were analyzed, and the possible reaction mechanisms involving photocatalytic ammonia conversion were proposed. ●OH has been identified as the main oxidant that affects the removal efficiency of ammonia nitrogen, whereas O2●- mainly affects the production of N2 and h+ is mainly responsible for the production of NO3-. These results indicate that Cu/TiO2 could be used as a low-cost and efficient photocatalyst in pretreatment process for conversion of high concentration of ammonia in wastewater.

An immunoassay cassette with a handheld reader for HIV urine testing in point-of-care diagnostics.

Currently, most HIV tests are performed with blood samples, or alternatively saliva samples are used for HIV testing. Simple HIV tests need to be performed in hospitals or other medical agencies instead of more invasive HIV blood tests. To enable point-of-care (POC) HIV diagnostics, based on a recently developed lateral flow strip for HIV urine testing, a microfluidic immunoassay cassette with a handheld optical reader is developed. Based on lateral flow strip with gold colloid reporter, the integrated immunoassay cassette can perform sample introduction, metering, discharging, applying and detection which simplifies HIV testing. An indicator is incorporated into the cassette to guide sample introduction based on color change, and further, the excess test sample is stored inside the sealed cassette to avoid any contamination. The low-cost handheld optical reader can provide a test result within a few seconds, which is useful for simple, sensitive and affordable HIV onsite detection. Instead of using normal white LEDs, a customized back light module embedded with green LEDs is adopted to illuminate the lateral flow strip with an appropriate working current to achieve optimal performance. Compared to the standard lateral flow strips using a benchtop reader, with the disposable immunoassay cassette assisted by the handheld optical reader, more convenient, easier-to-operate, and more affordable HIV urine testing can be achieved in POC diagnostics.

Understanding the learning mechanism of convolutional neural networks in spectral analysis.

Deep learning approaches, especially convolutional neural network (CNN) models, have achieved excellent performances in vibrational spectral analysis. The critical drawback of the CNN approach is the lack of interpretation, and it is regarded as a black box. Interpreting the learning mechanism of chemometric models is critical for intuitive understanding and further application. In this study, an interpretable CNN model with a global average pooling layer is presented for Raman and mid-infrared spectral data analysis. A class activation mapping (CAM)-based approach is leveraged to visualize the active variables in the whole spectrum. The visualization of active variables shows a discriminative pattern in which the most contributed variables peaked around theoretical chemical characteristic bands. The visualization of the feature maps by three convolutional layers demonstrates the data transformation pipeline and how the CNN model hierarchically extracts informative spectral features. The first layer acts as a Savitzky-Golay filter and learns spectral shape characteristics, while the second layer learns enhanced patterns from typical spectral peaks on a few correlated variables. The third layer shows stable activations on critical spectral peaks. A partial least squares - linear discriminant analysis (PLS-LDA) model is presented for comparison on classification accuracy and model interpretation. The CNN model yields mean classification accuracies of 99.01 and 100% for E. coli and meat datasets on the test set, while the PLS-LDA models obtain accuracies of 98.83 and 100%. Both the CNN and PLS-LDA models demonstrate stable patterns on active variables while CNN models are more stable than PLS-LDA models on classification performances for various dataset partitions with Monte-Carlo cross-validation.

Techno-economic assessment of turning gasification-based waste char into energy: A case study in South-Tyrol.

In the South-Tyrol region (Italy), 46 gasifiers are currently operating and €200,000 are annually paid to dispose of as a waste 1300 tons of char. Therefore, there is a considerable interest in finding alternatives for the valorization of this solid by-product. The aim of this work is to assess the potential of char as energy source and to compare two scenarios. The first scenario considers the possibility of exploiting char in a dedicated burner integrated in the gasification plant. The second scenario assumes that all the char is collected from South-Tyrol and co-fired with biomass in an existing combustion-ORC plant. An economic analysis was performed evaluating the discounted payback time and both scenarios were modeled using Aspen Plus®. The results reveal that substantial savings in the operating costs of the plants can be achieved. In the first scenario the owners of the gasification plants could save from 50% to 94% of the char disposal costs with a payback time ranging between 3 and 7 years. In the second scenario, the owner of the plant could save approximately €235 k per year with a payback time of approximately 7 years. The present study provides a basis for further techno-economic studies on char combustion. The results can be helpful for the owners of the gasification plants in determining the most cost-effective way to dispose char and to avoid disposing it of as a waste. Furthermore, it is demonstrated how char could be used as a renewable fuel, with better performance than raw biomass.

Techno-economic analysis for extracellular-polymeric substances (EPS) production using activated sludge fortified with crude glycerol as substrate and its application in leachate treatment.

Economic assessment of bio-flocculant production process has been carried out by SuperPro Designer where extracellular-polymeric substances (EPS) were produced using activated sludge fortified with crude glycerol in fermenter followed by centrifugation. Considering EPS concentration of 60 g/L in production fermenter at 96 h, the unit production cost for slime EPS was estimated to be $ 0.95/L. The unit price of S-EPS was sensitive to inoculum size and EPS productivity (EPS concentration and fermentation time) in the fermented broth. Economic analysis was also conducted for EPS aided leachate treatment. The unit leachate treatment cost was 7.78 $/m3 and was sensitive to S-EPS unit production cost. To get same leachate treatment cost as current industrial practice (4 $/m3), S-EPS unit production cost should lower down to $ 0.5/L. The process has several advantages: 1) sludge and crude glycerol valorization for bio-flocculant production 2) Leachate treatment using environment friendly bio-flocculant.

Prevalence, risk factors, and management of asthma in China: a national cross-sectional study.

BACKGROUND: Asthma is a common chronic airway disease worldwide. Despite its large population size, China has had no comprehensive study of the national prevalence, risk factors, and management of asthma. We therefore aimed to estimate the national prevalence of asthma in a representative sample of the Chinese population. METHODS: A representative sample of 57 779 adults aged 20 years or older was recruited for the national cross-sectional China Pulmonary Health (CPH) study using a multi-stage stratified sampling method with parameters derived from the 2010 census. Ten Chinese provinces, representative of all socioeconomic settings, from six geographical regions were selected, and all assessments were done in local health centres. Exclusion criteria were temporary residence, inability to take a spirometry test, hospital treatment of cardiovascular conditions or tuberculosis, and pregnancy and breastfeeding. Asthma was determined on the basis of a self-reported history of diagnosis by a physician or by wheezing symptoms in the preceding 12 months. All participants were assessed with a standard asthma questionnaire and were classed as having or not having airflow limitation through pulmonary function tests before and after the use of a bronchodilator (400 µg of salbutamol). Risk factors for asthma were examined by multivariable-adjusted analyses done in all participants for whom data on the variables of interest were available. Disease management was assessed by the self-reported history of physician diagnosis, treatments, and hospital visits in people with asthma. FINDINGS: Between June 22, 2012, and May 25, 2015, 57 779 participants were recruited into the CPH study. 50 991 (21 446 men and 29 545 women) completed the questionnaire survey and had reliable post-bronchodilator pulmonary function test results and were thus included in the final analysis. The overall prevalence of asthma in our sample was 4·2% (95% CI 3·1-5·6), representing 45·7 million Chinese adults. The prevalence of asthma with airflow limitation was 1·1% (0·9-1·4), representing 13·1 million adults. Cigarette smoking (odds ratio [OR] 1·89, 95% CI 1·26-2·84; p=0·004), allergic rhinitis (3·06, 2·26-4·15; p<0·0001), childhood pneumonia or bronchitis (2·43, 1·44-4·10; p=0·002), parental history of respiratory disease (1·44, 1·02-2·04; p=0·040), and low education attainment (p=0·045) were associated with prevalent asthma. In 2032 people with asthma, only 28·8% (95% CI 19·7-40·0) reported ever being diagnosed by a physician, 23·4% (13·9-36·6) had a previous pulmonary function test, and 5·6% (3·1-9·9) had been treated with inhaled corticosteroids. Furthermore, 15·5% (11·4-20·8) people with asthma reported at least one emergency room visit and 7·2% (4·9-10·5) at least one hospital admission due to exacerbation of respiratory symptoms within the preceding year. INTERPRETATION: Asthma is prevalent but largely undiagnosed and undertreated in China. It is crucial to increase the awareness of asthma and disseminate standardised treatment in clinical settings to reduce the disease burden. FUNDING: National Key R&D Program of China, Ministry of Science and Technology of China; the Special Research Foundation for Public Welfare of Health, Ministry of Health of China; the Chinese National Research Program for Key Issues in Air Pollution Control; and the National Natural Science Foundation of China.

Assessment of the energy recovery potential of waste Photovoltaic (PV) modules.

Global exponential increase in levels of Photovoltaic (PV) module waste is an increasing concern. The purpose of this study is to investigate if there is energy value in the polymers contained within first-generation crystalline silicon (c-Si) PV modules to help contribute positively to recycling rates and the circular economy. One such thermochemical conversion method that appeals to this application is pyrolysis. As c-Si PV modules are made up of glass, metal, semiconductor and polymer layers; pyrolysis has potential not to promote chemical oxidation of any of these layers to help aid delamination and subsequently, recovery. Herein, we analysed both used polymers taken from a deconstructed used PV module and virgin-grade polymers prior to manufacture to determine if any properties or thermal behaviours had changed. The calorific values of the used and virgin-grade Ethylene vinyl acetate (EVA) encapsulant were found to be high, unchanged and comparable to that of biodiesel at 39.51 and 39.87 MJ.Kg-1, respectively. This result signifies that there is energy value within used modules. As such, this study has assessed the pyrolysis behaviour of PV cells and has indicated the energy recovery potential within the used polymers found in c-Si PV modules.

Economical lipid production from Trichosporon oleaginosus via dissolved oxygen adjustment and crude glycerol addition.

The effect of dissolved oxygen concentration on lipid accumulation in Trichosporon oleaginosus has been investigated. The experiment was performed in 15 L fermenters. The dissolved oxygen concentration varied by adjusting the agitation and aeration. High dissolved oxygen level at 50%-60% enhanced cell growth. Maintaining low dissolved oxygen concentration at 20%-30% during lipogenesis phase led to high final lipid content (51%) in Trichosporon oleaginosus. The consumptions of energy and cost of the process were evaluated. The energy consumption in the dissolved oxygen level optimized process was 41% less than that with dissolved oxygen level at 50%-60%. In addition, the cost was also reduced around one time in the dissolved oxygen level optimized process compared to the one with dissolved oxygen level at 50%-60%. The study provided a feasible way of enhancing lipid accumulation in Trichosporon oleaginosus and reducing the consumption of energy and cost of lipid production from Trichosporon oleaginosus.

Economic assessment of biodiesel production from wastewater sludge.

Currently, there are mainly two pathways of the biodiesel production from wastewater sludge including 1) directly extracting the lipid in sludge and then converting the lipid to biodiesel through trans-esterification, and 2) employing sludge as medium to cultivate oleaginous microorganism to accumulate lipid and then transferring the lipid to biodiesel. So far, the study was still in research stage and its cost feasibility was not yet investigated. In this study, biodiesel production from wastewater sludge was designed and the cost was estimated with SuperPro Designer. With consideration of converting the lipid in raw sludge to biodiesel, the unit production cost was 0.67 US $/kg biodiesel (0.59 US $/L biodiesel). When the sludge was used as medium to grow oleaginous microorganism to accumulate lipid for producing biodiesel, the unit production cost was 1.08 US $/kg biodiesel (0.94 US $/L biodiesel). The study showed that sludge has great potential in biodiesel production.

Urban networks among Chinese cities along "the Belt and Road": A case of web search activity in cyberspace.

"The Belt and Road" initiative has been expected to facilitate interactions among numerous city centers. This initiative would generate a number of centers, both economic and political, which would facilitate greater interaction. To explore how information flows are merged and the specific opportunities that may be offered, Chinese cities along "the Belt and Road" are selected for a case study. Furthermore, urban networks in cyberspace have been characterized by their infrastructure orientation, which implies that there is a relative dearth of studies focusing on the investigation of urban hierarchies by capturing information flows between Chinese cities along "the Belt and Road". This paper employs Baidu, the main web search engine in China, to examine urban hierarchies. The results show that urban networks become more balanced, shifting from a polycentric to a homogenized pattern. Furthermore, cities in networks tend to have both a hierarchical system and a spatial concentration primarily in regions such as Beijing-Tianjin-Hebei, Yangtze River Delta and the Pearl River Delta region. Urban hierarchy based on web search activity does not follow the existing hierarchical system based on geospatial and economic development in all cases. Moreover, urban networks, under the framework of "the Belt and Road", show several significant corridors and more opportunities for more cities, particularly western cities. Furthermore, factors that may influence web search activity are explored. The results show that web search activity is significantly influenced by the economic gap, geographical proximity and administrative rank of the city.

Lipid Production for Biodiesel from Sludge and Crude Glycerol.

Oleaginous yeast Trichosporon oleaginosus was studied for lipid production using municipal sludge with or without fortification of crude glycerol in a 15-L fermenter. The maximum lipid content (concentration) was 32.0% w/w (9.35 g/L), 33.6% (10.13 g/L), 33.3% (9.13 g/L), and 33.1% (9.03 g/L) w/w with the addition of 25, 50, 100, and 150 g/L glycerol, respectively. Glycerol concentration had little effect on lipid accumulation. However, glycerol concentration substantially affected increase of biomass concentration and cell count. The suitable glycerol concentration was approximately 40 g/L for Trichosporon oleaginosus growing in sludge medium with initial suspended solids (SS) concentration 30 g/L. Addition of nitrogen to sludge-glycerol medium enhanced lipid and biomass concentration. The energy conversion efficiency was 1.78, 1.55, and 1.71 with no nitrogen added, with addition of 1 g/L urea, and 3.7 g/L peptone, respectively. The biodiesel production cost was estimated nearly 0.75 US$/L.

Quantitative assessment of the motor-sensory specificity of the motor and primary sensory neurons after the end-to-side neurorrhaphy.

We sought to evaluate the motor-sensory specificity of the motor and primary sensory neurons after the end-to-side neurorrhaphy. We divided 90 rats into three groups: (1) end-to-side neurorrhaphy using the ulnar nerve as donor nerve and the musculocutaneous nerve as recipient nerve; (2) normal control; and (3) transected nerve with the stumps buried. At 5 months, we monitored the grooming test, the electromyographic recordings, the histologic changes in the nerve, and quantitatively evaluated motoneurons and dorsal root ganglion (DRG) neurons following their retrograde labeling by Fluoro-Gold (Sigma, St. Louis, MO) applied to the musculocutaneous nerve and its biceps brachii branch. Grooming and electrophysiological investigations recovered successfully in the end-to-side group. The implanted musculocutaneous nerve contained varying but satisfactory numbers of axons. In the end-to-side group, the proportion of motoneurons for the biceps brachii branch of musculocutaneous nerve was very similar to the musculocutaneous nerve sections proximal to this branch (17.3% ± 2.7% and 21.7% ± 3.7%, respectively), but it did not correspond with the proportion of the biceps brachii branch of musculocutaneous nerve in the normal group (28.3% ± 3.5%). The present study confirms that limited but functional reinnervation can occur after the end-to-side neurorrhaphy, and the motor-sensory specificity is not important.

Introducing Bayesian thinking to high-throughput screening for false-negative rate estimation.

High-throughput screening (HTS) has been widely used to identify active compounds (hits) that bind to biological targets. Because of cost concerns, the comprehensive screening of millions of compounds is typically conducted without replication. Real hits that fail to exhibit measurable activity in the primary screen due to random experimental errors will be lost as false-negatives. Conceivably, the projected false-negative rate is a parameter that reflects screening quality. Furthermore, it can be used to guide the selection of optimal numbers of compounds for hit confirmation. Therefore, a method that predicts false-negative rates from the primary screening data is extremely valuable. In this article, we describe the implementation of a pilot screen on a representative fraction (1%) of the screening library in order to obtain information about assay variability as well as a preliminary hit activity distribution profile. Using this training data set, we then developed an algorithm based on Bayesian logic and Monte Carlo simulation to estimate the number of true active compounds and potential missed hits from the full library screen. We have applied this strategy to five screening projects. The results demonstrate that this method produces useful predictions on the numbers of false negatives.

In vivo assessment of the effect of controlled high- and low-frequency mechanical loading on peri-implant bone healing.

The aim of this study was to investigate the effect of controlled high- (HF) and low-frequency (LF) mechanical loading on peri-implant bone healing. Custom-made titanium implants were inserted in both tibiae of 69 adult Wistar rats. For every animal, one implant was loaded by compression through the axis of tibia (test), whereas the other one was unloaded (control). The test implants were randomly distributed among four groups receiving different loading regimes, which were determined by ex vivo calibration. Within the HF (40 Hz) or LF (2 Hz) loading category, the magnitudes were chosen as low- (LM) and high-magnitude (HM), respectively, leading to constant strain rate amplitudes for the two frequency groups. This resulted in the four loading regimes: (i) HF-LM (40 Hz-0.5 N); (ii) HF-HM (40 Hz-1 N); (iii) LF-LM (2 Hz-10 N); and (iv) LF-HM (2 Hz-20 N) loading. Loading was performed five times per week and lasted for one or four weeks. Tissue samples were processed for histology and histomorphometry (bone-to-implant contact, BIC; and peri-implant bone fraction, BF) at the cortical and medullar level. Data were analysed statistically with ANOVA and paired t-tests with the significance level set at 0.05. For the one-week experiments, an increased BF adjacent to the implant surface at the cortical level was exclusively induced by the LF-HM loading regime (2 Hz-20 N). Four weeks of loading resulted in a significant effect on BIC (and not on BF) in case of HF-LM loading (40 Hz-0.5 N) and LF-HM loading (2 Hz-20 N): BIC at the cortical level significantly increased under both loading regimes, whereas BIC at the medullar level was positively influenced only in case of HF-LM loading. Mechanical loading at both HF and LF affects osseointegration and peri-implant BF. Higher loading magnitudes (and accompanying elevated tissue strains) are required under LF loading to provoke a positive peri-implant bone response, compared with HF loading. A sustained period of loading at HF is needed to result in an overall enhanced osseointegration.

Fermentative hydrogen production from fresh leachate in batch and continuous bioreactors.

This research for the first time investigated hydrogen production from the fresh leachate originated from municipal solid wastes. We found that fermentation of the leachate generated H(2) and was very much enhanced in the presence of extra phosphate in the batch reactor. The continuous expanded granular sludge bed (EGSB) reactor started to generate H(2) at day 20 and continued to 176 days with 120 mg/l of extra phosphate present. The highest chemical oxygen demand (COD) removal efficiency (66.9%) was achieved at liquid up-flow velocity of 3.7 m/h and hydraulic retention time of 12h. Under proposed optimal operation conditions, the mean H(2) production rate reached up to 2155 ml/(l day). We also found that over 80% liquid metabolites were acetic acid and ethanol, suggesting the ethanol-type fermentation was dominant in the bioreactor. These findings indicate that the fresh leachate can be used as the source for continuous hydrogen production.