Experimental study and techno-economic analysis of co-processing system for treatment of food waste with various impurities.

The study assessed a co-processing system segregating food waste (FW) with different impurities into liquid (slurry) and solid fractions and treated using anaerobic digestion (AD) and pyrolysis (Py), respectively, which is defined as ADCo-Py. Biomethane potential tests showed higher methane yield from the FW slurry fraction (572.88 mL/gVSFW) compared to the whole FW (294.37 mL/gVSFW). Pyrolyzing the FW solid fraction reduced nitrogen compounds in bio-oil by 62 % compared to the whole FW. The energy balance and economic feasibility of ADCo-Py were compared with stand-alone AD, Py, and AD integrated with incineration (ADCo-INC). While all systems required extra energy, stand-alone Py and ADCo-INC needed 3.8 and 2.8 times more energy than ADCo-Py, respectively. Techno-economic analysis favored ADCo-Py, with a net present value (NPV) of $15 million and an internal rate of return (IRR) of 34 %. These findings highlighted FW separation as a promising approach, aligning with energy and economic goals in sustainable FW management.

Harmless Treatment of High Arsenic Tin Tailings and Environmental Durability Assessment.

The treatment of arsenic (As) in tin tailings (TT) has been an urgent environmental problem, and stabilization/solidification (S/S) treatment is considered an effective technology to eliminate contamination of As. In this study, we developed a low-carbon and low-alkalinity material to S/S of As, and the results showed that the leaching concentration of As after treatment was lower than the Chinese soil environmental quality standard (0.1 mg/L). Based on a series of characterization tests, we found that OH- promoted the dissolution of As(III)-S, Fe-As(V), and amorphous As(III)-O species and formed Ca-As(III) and Ca-(V) species with Ca2+. Simultaneously, hydration produces calcium silicate hydrate (C-S-H) gel and ettringite by the form of adsorption and ion exchange to achieve S/S of As. We also assessed the durability of this material to acidity and temperature, and showed that the leaching concentration of As was below 0.1 mg/L at pH = 1-5 and temperature 20-60 °C. The method proposed in this study, S/S of As, has excellent effect and environmental durability, providing a new solution for harmless treatment of TT and its practical application.

Self-Powered Multifunctional Electronic Skin Based on Carbon Nanotubes/Poly(dimethylsiloxane) for Health Monitoring.

Flexible and multifunctional electronic skin (e-skin) has received remarkable attention for its potential applications in health monitoring, human-machine interface, and artificial sensory nerves. However, conventional multifunctional e-skins require complex material systems, sophisticated fabrication, and external power supplies, leading to increased preparation cost and duration, thus hindering their large-scale utilization. Herein, a self-powered multifunctional e-skin system with properties of pressure, temperature, underwater sensing, and photothermal heating is designed based on carbon nanotubes/poly(dimethylsiloxane) (CNT/PDMS) acting as both the multifunctional sensing layer and the cathode of the power supply. Our micropyramidal structured e-skin exhibits outstanding pressure sensitivity (1.51 × 103 kPa-1) over a wide sensing range (2.5-255.7 kPa) and maintains ultralong-term durability (>20 000 cycles). It can also provide personalized photothermal therapy at an adjustable temperature (40-110 °C) and heating area under near-infrared irradiation due to the photothermal effect of CNTs, with the temperature being detected synchronously by current signals. Additionally, the hydrophobicity of the CNT/PDMS film endows our device with underwater sensing capability. Furthermore, practical healthcare applications have been demonstrated with reliable signal quality and stability, such as daily activities and underwater movements/temperature monitoring, SOS Morse code communication, and human-machine interface. This work could provide insight on developing simple, stable, and wearable healthcare devices with self-power supply and multifunction.

Wearable Circuits Sintered at Room Temperature Directly on the Skin Surface for Health Monitoring.

A soft body area sensor network presents a promising direction in wearable devices to integrate on-body sensors for physiological signal monitoring and flexible printed circuit boards (FPCBs) for signal conditioning/readout and wireless transmission. However, its realization currently relies on various sophisticated fabrication approaches such as lithography or direct printing on a carrier substrate before attaching to the body. Here, we report a universal fabrication scheme to enable printing and room-temperature sintering of the metal nanoparticle on paper/fabric for FPCBs and directly on the human skin for on-body sensors with a novel sintering aid layer. Consisting of polyvinyl alcohol (PVA) paste and nanoadditives in the water, the sintering aid layer reduces the sintering temperature. Together with the significantly decreased surface roughness, it allows for the integration of a submicron-thick conductive pattern with enhanced electromechanical performance. Various on-body sensors integrated with an FPCB to detect health conditions illustrate a system-level example.

Variation in insurance-mortality relationship amid macroeconomic shifts: a study of SEER female-specific cancer patients in USA.

OBJECTIVES: Health insurance availability and affordability are vital elements in diagnosis and treatment of patients with cancer and thus constitute clinical significance as well. Although past studies have explored the disparity in mortality figures for patients with different insurance statuses, this population-based study is pioneering in analyzing the changes in cancer mortality risks over time amid macroeconomic shifts. STUDY DESIGN: The study uses Surveillance Epidemiology and End Results (SEER) data of 424,889 non-elderly patients with breast, cervical, ovarian, and uterine cancer diagnosed during 2007-2010 and 2011-2015. METHODS: In addition to discussing incidence figures and insurance patterns, the study uses Kaplan-Meier and Cox's proportional hazard models to examine the changes in survival probability and mortality risks for insurance-stratified patients with female-specific cancer across the two time periods. RESULTS: Patients without insurance have an increased risk of mortality over time relative to insured patients. Moreover, uninsured patients face this heightened risk more than Medicaid patients. DISCUSSION: Despite public policy measures as well as advancements in diagnostic facilities and treatment technology, the increased relative mortality of patients without insurance limits the long-term affordability of cancer treatment for economically vulnerable patients in comparison with insured patients.

Biological Degradation of Aflatoxin B1 by Cell-Free Extracts of Bacillus velezensis DY3108 with Broad PH Stability and Excellent Thermostability.

(1) Background: Aflatoxin contamination in food and grain poses serious problems both for economic development and public health protection, thus leading to a focus on an effective approach to control it; (2) Methods: Aflatoxin B1 (AFB1) degrading bacteria were isolated using a medium containing coumarin as the sole carbon source, and the biodegradation of AFB1 by the isolate was examined by high performance liquid chromatography, and liquid chromatography mass spectrometry; (3) Results: a bacterial strain exhibiting strong AFB1 degradation activity (91.5%) was isolated and identified as Bacillusvelezensis DY3108. The AFB1 degrading activity was predominantly attributed to the cell-free supernatant of strain DY3108. Besides, it was heat-stable and resistant to proteinase K treatment but sensitive to sodium dodecyl sulfate treatment. The optimal temperature for the maximal degradation of AFB1 was 80 °C. Even more notable, the supernatant showed a high level of activity over a broad pH (4.0 to 11.0) and exhibited the highest degradation (94.70%) at pH 8.0. Cytotoxicity assays indicated that the degradation products displayed significantly (p < 0.05) lower cytotoxic effects than the parent AFB1; (4) Conclusions: B.velezensis DY3108 might be a promising candidate for exploitation in AFB1 detoxification and bioremediation in food and feed matrices.

Long-range PCR in next-generation sequencing: comparison of six enzymes and evaluation on the MiSeq sequencer.

Long-range PCR remains a flexible, fast, efficient and cost-effective choice for sequencing candidate genomic regions in a small number of samples, especially when combined with next-generation sequencing (NGS) platforms. Several long-range DNA polymerases are advertised as being able to amplify up to 15 kb or longer genomic DNA. However, their real-world performance characteristics and their suitability for NGS remain unclear. We evaluated six long-range DNA polymerases (Invitrogen SequalPrep, Invitrogen AccuPrime, TaKaRa PrimeSTAR GXL, TaKaRa LA Taq Hot Start, KAPA Long Range HotStart and QIAGEN LongRange PCR Polymerase) to amplify three amplicons, with sizes of 12.9 kb, 9.7 kb, and 5.8 kb, respectively. Subsequently, we used the PrimeSTAR enzyme to amplify entire BRCA1 (83.2 kb) and BRCA2 (84.2 kb) genes from nine subjects and sequenced them on an Illumina MiSeq sequencer. We found that the TaKaRa PrimeSTAR GXL DNA polymerase can amplify almost all amplicons with different sizes and Tm values under identical PCR conditions. Other enzymes require alteration of PCR conditions to obtain optimal performance. From the MiSeq run, we identified multiple intronic and exonic single-nucleotide variations (SNVs), including one mutation (c.5946delT in BRCA2) in a positive control. Our study provided useful results for sequencing research focused on large genomic regions.