Re-evaluating the impact and mechanism of digital economy on regional pollution intensity from the perspective of spatial spillover.

Based on the panel data of 259 cities across China from 2011 to 2019, the study investigates the long-run impact of digital economy on regional pollution intensity by employing multiple models. The estimation results reveal that (1) the relatively heavily polluted areas are concentrated in the north, especially in the northeast of China; the overall pollution intensity is decreasing year by year at the national level; (2) the development of digital economy can significantly contribute to the reduction of regional pollution intensity and it has a statistically significant negative spatial spillover effect on the pollution intensity of neighboring cities; (3) mechanism analysis shows that the development of digital economy not only has a direct effect on the reduction of pollution intensity but also promotes the reduction through the channel of industrial structure upgrading and green technology progress; (4) the results of threshold model suggest that as the level of development of the digital economy increases, its marginal inhibitory effect of promoting the decrease in pollution intensity will diminish; (5) heterogeneity analysis shows that the development of digital economy makes the strongest marginal contribution to pollution intensity reduction in the northeast region. Finally, the conclusions remain valid after controlling for exogenous shocks such as "smart city" policy, various robustness, and endogeneity tests.

An Ultra-Low Power Reconfigurable Biomedical AI Processor With Adaptive Learning for Versatile Wearable Intelligent Health Monitoring.

Wearable intelligent health monitoring devices with on-device biomedical AI processor can be used to detect the abnormity in users' biomedical signals (e.g., ECG arrythmia classification, EEG-based seizure detection). This requires ultra-low power and reconfigurable biomedical AI processor to support battery-supplied wearable devices and versatile intelligent health monitoring applications while achieving high classification accuracy. However, existing designs have issues in meeting one or more of the above requirements. In this work, a reconfigurable biomedical AI processor (named BioAIP) is proposed, mainly featuring: 1) a reconfigurable biomedical AI processing architecture to support versatile biomedical AI processing. 2) an event-driven biomedical AI processing architecture with approximate data compression to reduce the power consumption. 3) an AI-based adaptive-learning architecture to address patient-to-patient variation and improve the classification accuracy. The design has been implemented and fabricated using a 65nm CMOS process technology. It has been demonstrated with three typical biomedical AI applications, including ECG arrythmia classification, EEG-based seizure detection and EMG-based hand gesture recognition. Compared with the state-of-the-art designs optimized for single biomedical AI tasks, the BioAIP achieves the lowest energy per classification among the designs with similar accuracy, while supporting various biomedical AI tasks.

Heavy metal content and health risk assessment of atmospheric particles in China: A meta-analysis.

In recent decades, China has devoted significant attention to the heavy metals pollution in particulate matter. However, the majority of studies have only focused on the field monitoring in relatively remote areas, which may not be representative of air quality across the country. This study reevaluated the characteristics, temporal and spatial changes, and health concerns associated with heavy metal pollution in atmospheric particulates on a national scale by coupling Meta-analysis and Monte Carlo simulation analysis. In terms of spatial distribution, the heavy metals pollution levels in the northern coast and northeastern regions are relatively high, whereas it is low along the middle Yellow River, middle Yangtze River, as well as Southwest. With the exception of Cu, the distribution of all elements in PM2.5 steadily decreased over time Moreover, PM10 and PM2.5 performed similar where Cd and Ni both first increased followed by a decline while, Cr displayed a decrease before it showed an increment. And since the implementation of prevention and control policies about the atmospheric release, the focus of industrial emission has gradually shifted from energy production and processing to living products manufacturing. Moreover, the carcinogenic risk was shown to be Cr > As, Pb > Ni, Cd, while the non-carcinogenic risk was as follows: As, Ni > Cr, Cd. Among all contaminants, Cd, As, and Cr in PM2.5 and PM10 exceeded the WHO standard in the cities with worst air quality. It was observed that As posed the largest non-carcinogenic risk to adults while, Cr caused the most carcinogenic risk to adults and children, where the carcinogenic risk of children remains higher than that of adults. Therefore, the findings of this study may offer data support to the China's heavy metal pollution standards in airborne particles and offer theoretical data support for pollution management.

Life cycle assessment of shared electric bicycle on greenhouse gas emissions in China.

Following the bike-sharing system, the shared electric bicycle (SEB) is experiencing explosive growth in China as an emerging shared transportation mode. While shared transportation has long been linked to energy conservation and reducing emissions, a major problem facing SEB is whether it can reach the goal of greenhouse gas (GHG) reduction. This paper aims to evaluate GHG emissions at each stage of production, operation, and disposal of the SEB using life cycle assessment of GHG emissions. We also compared the differences in GHG emissions between the recycling incineration scenario (H1) and the recycling degradation scenario (H2) in the disposal stage. The GHG emissions of SEB in the production and operation stages were found to be 379.6173 kg CO2-eq and 183.4663 kg CO2-eq, respectively. However, the GHG emission reduction in the use stage was 1049.8374 kg CO2-eq. Thus, the net GHG reduction in the life cycle of the SEB was 487.3923 kg CO2-eq. (H1) and 433.9215 kg CO2-eq. (H2), respectively, indicating that SEB had a green effect. Non-recyclable parts of SEB will take 48 years to degrade in landfills in the H2 scenario. The GHG emission thresholds for SEB were further discussed. When the average daily turnover rate of SEB was less than 4 and its operation day was less than 479, SEB would not be able to achieve the goal of GHG reduction in the whole life cycle, with the riding statistics remaining unchanged. Finally, some advice for practical issues of electric bicycle sharing in energy conservation and GHG reduction were presented in response to the results.

Digital economy and industrial energy efficiency performance: evidence from the city of the Yangtze River Delta in China.

Industry dominates energy consumption and carbon emissions in China, and industrial energy efficiency is critical for the achievement of energy transformation and carbon emission reduction. With the rapid development of the digital economy, its impact on energy efficiency is gradually emerging, and it is necessary to clarify the influencing mechanism on industrial energy efficiency. Based on the panel data of industrial sectors in 41 cities in the Yangtze River Delta from 2011 to 2019, the main objectives of this study are to more accurately measure the industrial total factor energy efficiency in each city by using the Super-Dynamic-SBM model. It analyses the influence mechanism of the digital economy and other influencing factors on industrial total factor energy efficiency with different methods. The research results indicate that, first, the total factor energy efficiency of the industrial sector in the Yangtze River Delta urban agglomeration generally showed a steady upward trend. Second, the digital economy and environmental regulation play a significant role in promoting total factor energy efficiency. In addition, industrial energy efficiency and the digital economy show an inverted "U" shaped relationship. With the improvement of the digital economy, its marginal contribution to total factor energy efficiency gradually weakens. Finally, technological progress is an important transmission channel for the impact of the digital economy on total factor energy efficiency.

Development of a Portable Method for Serum Lithium Measurement Based on Low-Cost Miniaturized Ultrasonic Nebulization Coupled with Atmospheric-Pressure Air-Sustained Discharge.

An accurate, rapid but cheap, and portable method for monitoring of serum lithium (Li) is highly desirable for mental patients who take Li medicine for treatment. Conventional techniques are usually bulky, costly, and cannot provide on-site real-time measurements. Herein, a miniaturized, reliable, cost-effective, and portable optical emission method for rapid and sensitive determination of serum Li was developed based on a combination of miniaturized ultrasonic nebulization (MUN) and a low-power (≈22 W) atmospheric-pressure air-sustained discharge (APAD) excitation source. The proposed method eliminates the use of any compressed gas or pump and can achieve serum Li detection within 40 s with low sample consumption (less than 20 µL serum). Except for dilution with water, no extra treatment is needed for serum Li analysis by MUN-APAD-OES. In addition, it offers a significant advantage of good tolerance to the coexisting high concentration of Na, K, Ca, and Mg, which is in contrast with the obvious matrix effect encountered in conventional inductively coupled plasma optical emission spectrometry (ICP-OES). Different operating parameters affecting the performance of MUN-APAD-OES were evaluated. Under optimized conditions, the detection limit of Li (670.8 nm) was calculated to be 0.6 µg L-1 (6 µg L-1 in serum). Finally, the accuracy of the proposed method was validated by the analysis of two certified reference materials (Seronorm serum L-1 and L-2 RUO), six real human serum samples, and eight real animal serum samples. All of the results indicate that the low-cost and low-power MUN-APAD-OES provides a promising reliable method for on-site serum Li measurement and may also be extended to other elements.

Human health-risk assessment based on chronic exposure to the carbonyl compounds and metals emitted by burning incense at temples.

Health effects resulting from the smoke of carbonyl compounds (aldehydes and ketones) and metal-containing incense particles at temples during incense burning periods were evaluated at temple A (without incense reduction activities) and B (with incense reduction activities), Nantou County, in 2018. The predominant size fractions of particles were PM1, PM1-2.5, and PM2.5-10 at both temples. The total particle mass at temple A was approximately 1.1 times that of temple B due to incense reduction at temple B. The most abundant metal elements in all particle size fractions at both temples were Fe, Al, and Zn. Metal species of incense smoke are divided into three groups by hierarchical cluster analysis and heatmaps, showing higher metal contents in groups PM1, PM18-10, and PM18-2.5 at temple A. In contrast, higher metal contents were observed in PM18-10 and PM2.5-1 at temple B. Most of the carbonyl species were formaldehyde and acetaldehyde, released during incense burning periods, with concentrations ranging from 6.20 to 13.05 µg/m3 at both temples. The total deposited fluxes of particle-bound metals at temples A and B were determined to be 83.00% and 84.82% using the International Commission on Radiological Protection (ICRP) model. Health-risk assessments revealed that the risk values of metals and carbonyls were above recommended guidelines (10-6) at temple A. Since worshippers and staff are exposed to incense burning environments with poor ventilation over a long period, these toxic organic compounds and metals increase health risks in the respiratory tract. Therefore, incense reduction is important to achieve healthy temple environments.

The effects of ageing population on health expenditure and economic growth in China: A Bayesian-VAR approach.

The increasing proportion of the population aged 65 or over has generated a global rise of health spending due to higher demand for medical and long-term care services, which has become a growing challenge to the sustainability of public finances across countries. This phenomenon is especially prominent in China, which has experienced accelerated rates of both economic growth and population ageing over the past four decades. Using Bayesian-VAR (B-VAR) models we compute the impulse response functions (IRFs) and the forecast error variance decomposition functions (FEVDs) to empirically examine the dynamic relationships between ageing index, life expectancy, economic growth and health expenditure in China. We compare China with the USA which has distinct trajectories of population structure and economic development to better understand the former's dynamic patterns. We find a pronounced response for both the USA and China of ageing index to life expectancy and of health spending per capita to GDP per capita, while ageing population induces a relatively strong reaction from health expenditure per capita in China. Our results are robust with either nominal or real variables. These findings suggest that, in China, a well-rounded policy accommodating economic, social and health factors is needed to improve the quality of life of the ageing population for a sustainable development of the economy.

Disparities in Cancer Incidence among Chinese Population versus Migrants to Developed Regions: A Population-Based Comparative Study.

BACKGROUND: The incidence of cancer was determined by genetic and environmental factors and varied across the world. The discrepancies in cancer profile among Chinese people living in different regions remained obscure. METHODS: Chinese people living in urban Shanghai, Hong Kong, Taiwan, Macau, Singapore, and Los Angeles were included in this study. The cancer case data and population data were collected from either the Cancer Incidence in Five Continents Plus database or the regional cancer registry. A rate model was applied to examine the regional differences in cancer risk with Shanghai set as the reference. RESULTS: From 1983 to 2013, the cancer profiles in most regions were changed. Significant differences in cancer incidence, by sex, period, and age, were detected across regions. The most pronounced disparities were found between Shanghai people and American Chinese in Los Angeles. For cancer site, the most significant differences were detected in prostate, gastrointestinal, gynecologic, oral cavity and pharynx, and brain and central nervous system (CNS) cancers. Specifically, Shanghai was significantly higher in stomach, liver, esophageal, pancreatic, and brain and CNS cancers, while lower in colon, prostate, breast, cervical, and oral cavity and pharynx cancers compared with the other five populations. CONCLUSIONS: Cancer profile was distinct across Chinese populations, which shared a similar genetic background but lived in different regions. The disparities indicate that cancer development was majorly determined by environmental factors, and suggests that region-tailored cancer prevention strategies were warranted. IMPACT: The cancer patterns in populations sharing the same genetic background were significantly influenced by different living conditions.

Incompatibility assessment of Genkwa Flos and Glycyrrhizae Radix et Rhizoma with biochemical, histopathological and metabonomic approach.

ETHNOPHARMACOLOGICAL RELEVANCE: As recorded in traditional Chinese medicine (TCM) theory, Genkwa Flos (YH) and Glycyrrhizae Radix et Rhizoma (GC) compose one herbal pair of the so-called "eighteen incompatible medicaments", which indicate pairs of herbs that are mutually incompatible and that theoretically should not be applied simultaneously. However, the theory has been called into question due to a lack of evidence. AIMS OF STUDY: In this study, the incompatibility of YH and GC was investigated based on an assessment of the toxic effects of their combination by traditional safety methods and a modern metabonomic approach. MATERIALS AND METHODS: Sprague-Dawley rats were used to evaluate the subacute toxicity of YH and YH-GC. The serum, urine, and several tissues were collected for biochemical analysis, histopathological examination, and metabonomic analysis. RESULTS: Rats exposed to a dose of 1.0 g/kg YH (3 times of the Chinese Pharmacopoeia maximum dose) exhibited toxicity of the heart, liver, kidney and testes, and rats exposed to a YH-GC combination (1.0 g/kg YH + 1.0 g/kg GC) exhibited similar hepatotoxicity, which aggravated renal and reproductive toxicity. Following this, a metabonomic study tentatively identified 14 potential biomarkers in the YH group and 10 potential biomarkers in the YH-GC group, and metabolic pathways were then constructed. YH disturbed the pathways of glycerophospholipid metabolism, primary bile acid biosynthesis, and sphingolipid metabolism, while YH-GC combination induced disruptions in phenylalanine, tyrosine and tryptophan biosynthesis, tyrosine metabolism, and glycerophospholipid metabolism. CONCLUSION: The toxicities of YH and YH-GC combination above the Chinese Pharmacopoeia dose were obvious but different. Metabonomics combined with biochemical and histopathological methods can be applied to elucidate the toxicity mechanism of the YH-GC combination that caused liver, kidney and reproductive injuries in rats.

Assessment of one-dose mumps-containing vaccine effectiveness on wild-type genotype F mumps viruses circulating in mainland China.

To clarify the protective effect of one-dose mumps-containing vaccines (MuCV) in mainland China, the antigenic variations of HN gene and cross-neutralization capacities between MuCV and wild type genotype F MuVs were studied. In total, 70 HN gene sequences of genotype F MuV representative strains obtained from 2001 to 2015, two types of MuCV strains, 139 pairs of pre- and post-vaccination serum samples from infants receiving one dose of MuCV vaccination were analyzed. Genotype-specific amino acid variations were observed in the potential antigenic epitopes between MuCV and wild-type genotype F MuVs circulating in mainland China. The mumps neutralization antibody titers induced by one-dose MuCV were found to be generally low. Moreover, significant differences in neutralization titers were observed between vaccine and wild-type strains. It could be concluded that one-dose MuCV had a cross-protective effect against the wild-type genotype F MuVs, but its effectiveness was limited, which might be caused by insufficient doses of MuCV vaccination and the genotype-specific antigenic differences between vaccine and wild-type MuVs as well. In addition, a poor linear correlation between mumps-specific IgG concentrations and neutralization titers was observed in this study, indicating the concentration of MuV-specific IgG could not fully reflect the neutralizing antibody titer in serum. Therefore, it is highly recommended to provide a second dose of MuCV to preschool children to increase MuV neutralizing antibody titers and use MuV cross-neutralization test as preferred tool for assessment of mumps-containing vaccine effectiveness on wild-type MuVs. This is the first report to assess the effectiveness of one-dose Chinese MuCV against wild-type genotype F MuVs, which would be benefit for the development of mumps vaccination strategy.

A novel three-dimensional tumorsphere culture system for the efficient and low-cost enrichment of cancer stem cells with natural polymers.

Cancer stem cells (CSCs) are considered to serve a key role in tumor progression, recurrence and metastasis. Tumorsphere culture is the most important method for enriching CSCs and is widely used in basic research and drug screening. However, the traditional suspension cell culture system has several disadvantages, including low efficiency, high cost and difficult procedure, making it difficult to produce tumorspheres on a large scale. In the present study, two biomaterials, methylcellulose (MC) and gellan gum (GG), were used to construct a novel culture system based on the traditional system. Subsequently, the characteristics of the novel three-dimensional (3D) culture system were evaluated, the design scheme was optimized, and the morphological and biological features of the tumorspheres cultured in this 3D system were compared with the traditional system. The results revealed that the tumorspheres cultured in the novel 3D system presented a higher seeding density and improved morphology, while maintaining stem-like properties. This evidence suggests that a simple, efficient and low-cost culture system that produces tumorspheres on a large scale was successfully constructed, which can be widely used in various aspects of stem cell research.

Global value trees.

The fragmentation of production across countries has become an important feature of the globalization in recent decades and is often conceptualized by the term "global value chains" (GVCs). When empirically investigating the GVCs, previous studies are mainly interested in knowing how global the GVCs are rather than how the GVCs look like. From a complex networks perspective, we use the World Input-Output Database (WIOD) to study the evolution of the global production system. We find that the industry-level GVCs are indeed not chain-like but are better characterized by the tree topology. Hence, we compute the global value trees (GVTs) for all the industries available in the WIOD. Moreover, we compute an industry importance measure based on the GVTs and compare it with other network centrality measures. Finally, we discuss some future applications of the GVTs.

[A Hyperspectral Imagery Anomaly Detection Algorithm Based on Gauss-Markov Model].

With the development of spectral imaging technology, hyperspectral anomaly detection is getting more and more widely used in remote sensing imagery processing. The traditional RX anomaly detection algorithm neglects spatial correlation of images. Besides, it does not validly reduce the data dimension, which costs too much processing time and shows low validity on hyperspectral data. The hyperspectral images follow Gauss-Markov Random Field (GMRF) in space and spectral dimensions. The inverse matrix of covariance matrix is able to be directly calculated by building the Gauss-Markov parameters, which avoids the huge calculation of hyperspectral data. This paper proposes an improved RX anomaly detection algorithm based on three-dimensional GMRF. The hyperspectral imagery data is simulated with GMRF model, and the GMRF parameters are estimated with the Approximated Maximum Likelihood method. The detection operator is constructed with GMRF estimation parameters. The detecting pixel is considered as the centre in a local optimization window, which calls GMRF detecting window. The abnormal degree is calculated with mean vector and covariance inverse matrix, and the mean vector and covariance inverse matrix are calculated within the window. The image is detected pixel by pixel with the moving of GMRF window. The traditional RX detection algorithm, the regional hypothesis detection algorithm based on GMRF and the algorithm proposed in this paper are simulated with AVIRIS hyperspectral data. Simulation results show that the proposed anomaly detection method is able to improve the detection efficiency and reduce false alarm rate. We get the operation time statistics of the three algorithms in the same computer environment. The results show that the proposed algorithm improves the operation time by 45.2%, which shows good computing efficiency.

The rise of China in the International Trade Network: a community core detection approach.

Theory of complex networks proved successful in the description of a variety of complex systems ranging from biology to computer science and to economics and finance. Here we use network models to describe the evolution of a particular economic system, namely the International Trade Network (ITN). Previous studies often assume that globalization and regionalization in international trade are contradictory to each other. We re-examine the relationship between globalization and regionalization by viewing the international trade system as an interdependent complex network. We use the modularity optimization method to detect communities and community cores in the ITN during the years 1995-2011. We find rich dynamics over time both inter- and intra-communities. In particular, the Asia-Oceania community disappeared and reemerged over time along with a switch in leadership from Japan to China. We provide a multilevel description of the evolution of the network where the global dynamics (i.e., communities disappear or reemerge) and the regional dynamics (i.e., community core changes between community members) are related. Moreover, simulation results show that the global dynamics can be generated by a simple dynamic-edge-weight mechanism.

Zr61Ti2Cu25Al12 metallic glass for potential use in dental implants: biocompatibility assessment by in vitro cellular responses.

In comparison with titanium and its alloys, Zr61Ti2Cu25Al12 (ZT1) bulk metallic glass (BMG) manifests a good combination of high strength, high fracture toughness and lower Young's modulus. To examine its biocompatibility required for potential use in dental implants, this BMG was used as a cell growth subtract for three types of cell lines, L929 fibroblasts, human umbilical vein endothelial cells (HUVEC), and osteoblast-like MG63 cells. For a comparison, these cell lines were in parallel cultured and grown also on commercially pure titanium (CP-Ti) and Ti6-Al4-V alloy (Ti64). Cellular responses on the three metals, including adhesion, morphology and viability, were characterized using the SEM visualization and CCK-8 assay. Furthermore, real-time RT-PCR was used to measure the activity of integrin ß, alkaline phosphatase (ALP) and type I collagen (COL I) in adherent MG63 cells. As indicated, in all cases of three cell lines, no significant differences in the initial attachment and viability/proliferation were found between ZT1, CP-Ti, and Ti64 until 5d of incubation period. It means that the biocompatibility in cellular response for ZT1 BMG is comparable to Ti and its alloys. For gene expression of integrin ß, ALP and COL I, mRNA level from osteoblast cells grown on ZT1 substrates is significantly higher than that on the CP-Ti and Ti64. It suggests that the adhesion and differentiation of osteoblasts grown on ZT1 are even superior to those on the CP-Ti and Ti64 alloy, then promoting bone formation. The good biocompatibility of ZT1 BMG is associated with the formation of zirconium oxide layer on the surface and good corrosion-resistance in physiological environment.

[Assessment of mitochondrial toxicity induced by zidovudine and adefovir dipivoxil in rats].

OBJECTIVE: To explore the mitochondrial toxicities induced by zidovudine (AZT) and adefovir dipivoxil (ADV) antiviral drugs using a rat model system. METHODS: Twelve healthy Sprague-Dawley rats were randomly divided into three equal groups and treated by oral gavage with zidovudine (125 mg/kg/day), adefovir (40 mg/kg/day), or saline (equal volume) for 28 days. The rats' body weights were measured once a week, and blood was collected every two weeks for blood and biochemical tests. All animals were sacrificed at the end of treatment, and liver, kidney, skeletal muscle, and cardiac muscle were collected by necropsy. Mitochondria were isolated from the respective tissue samples, and the activities of respiratory chain complexes were measured. DNA was purified from each sample and the mitochondrial DNA (mtDNA) content was monitored by quantitative real time PCR. Mitochondrial morphology was analyzed under electron microscope. RESULTS: No significant adverse effects, including body weight loss, abnormal blood or biochemistry, were observed in rats treated with AZT or ADV. The activities of mitochondrial cytochrome c oxidase in liver and cardiac muscle were slightly decreased in rats treated with AZT (liver: 9.44+/-3.09 vs. 17.8+/-12.38, P?=?0.21; cardiac muscle: 32.74+/-5.52 vs. 24.74+/-20.59, P?=?0.28; kidney: 4.42+/-1.53 vs. 14.45+/-13.75, P?=?0.18; skeletal muscle: 33.75+/-8.74 vs. 40.04+/-2.49, P?=?0.45). The mtDNA content was significantly decreased in cardiac muscle of AZT-treated rats (cardiac muscle: 0.15+/-0.13 vs. 0.32+/-0.42, P?=?0.85). The morphology of mitochondria in liver, kidney, skeletal muscle, and cardiac muscle was significantly altered in the AZT-treated rats and included disappearance of the outer membrane, severely damaged structure, and swollen or completely absent cristae. No obvious effects were noted in the ADV- or saline-treated rats. CONCLUSION: Significant adverse effects related to mitochondrial toxicity were observed in rats treated with AZT. The slightly decreased mtDNA content in ADV-treated rats may suggest that this antiviral drug can also cause mitochondrial toxic effects.

[Assessment of lymph node metastasis in gastric cancer: status quo, recent advances and new perspectives].

The precondition of accurate gastric cancer surgery is precise assessment of lymph node metastasis. To date, no imaging modality achieves both high sensitivity and high specificity in detecting lymph node metastasis in gastric cancer. Intraoperative sentinel node tracing and biopsy are the most popular method to identify the localization of tumor cell, but is limited to early gastric cancer. Nano-composite materials, designed for tumor imaging and tracing, show us a newly emerging domain for tumor detection in gastric cancer. The function of these nano-composite materials to detect lymph node metastasis in gastric cancer relies on the effective backflow of lymph system. However, the lymph vessels can be obstructed by tumor cells in advanced gastric cancer, which may restrain the application of these nanoparticles. Therefore, more methods to detect lymph node metastasis in gastric cancer should be explored. This review summarizes the characteristic of the targeted nanosphere. Based on the reported studies, a novel idea is conceived that targeted multifunctional nanosphere may be a potential method to achieve precise assessment of lymph node metastasis in gastric cancer.

Development and clinical application of a length-adjustable water phantom for total body irradiation.

A new type of water phantom which would be specialised for the absorbed dose measurement in total body irradiation (TBI) treatment is developed. Ten millimetres of thick Plexiglas plates were arranged to form a square cube with 300 mm of edge length. An appropriate sleeve-type piston was installed on the side wall, and a tabular Plexiglas piston was positioned inside the sleeve. By pushing and pulling the piston, the length of the self-made water phantom could be varied to meet the required patients' physical sizes. To compare the international standard water phantom with the length-adjustable and the Plexiglas phantoms, absorbed dose for 6-MV X ray was measured by an ionisation chamber at different depths in three kinds of phantoms. In 70 cases with TBI, midplane doses were metered using the length-adjustable and the Plexiglas phantoms for simulating human dimensions, and dose validation was synchronously carried out. There were no significant statistical differences, p > 0.05, through statistical processing of data from the international standard water phantom and the self-designed one. There were significant statistical differences, p < 0.05, between the two sets of data from the standard and the Plexiglas one. In addition, the absolute difference had a positive correlation with the varied depth of the detector in the Plexiglas phantom. Comparing the data of clinical treatment, the differences were all <1 % among the prescription doses and the validation data collected from the self-design water phantom. However, the differences collected from the Plexiglas phantom were increasing gradually from +0.77 to +2.30 % along with increasing body width. Obviously, the difference had a positive correlation with the body width. The results proved that the new length-adjustable water phantom is more accurate for simulating human dimensions than Plexiglas phantom.

Emergence and transmission pathways of rapidly evolving evolutionary branch C4a strains of human enterovirus 71 in the Central Plain of China.

BACKGROUND: Large-scale outbreaks of hand, foot, and mouth disease (HFMD) occurred repeatedly in the Central Plain of China (Shandong, Anhui, and Henan provinces) from 2007 until now. These epidemics have increased in size and severity each year and are a major public health concern in mainland China. PRINCIPAL FINDINGS: Phylogenetic analysis was performed and a Bayesian Markov chain Monte Carlo tree was constructed based on the complete VP1 sequences of HEV71 isolates. These analyses showed that the HFMD epidemic in the Central Plain of China was caused by at least 5 chains of HEV71 transmission and that the virus continued to circulate and evolve over the winter seasons between outbreaks. Between 1998 and 2010, there were 2 stages of HEV71 circulation in mainland China, with a shift from evolutionary branch C4b to C4a in 2003-2004. The evolution rate of C4a HEV71 was 4.99×10(-3) substitutions per site per year, faster than the mean of all HEV71 genotypes. The most recent common ancestor estimates for the Chinese clusters dated to October 1994 and November 1993 for the C4a and C4b evolutionary branches, respectively. Compared with all C4a HEV71 strains, a nucleotide substitution in all C4b HEV71 genome (A to C reversion at nt2503 in the VP1 coding region, which caused amino acid substitution of VP1-10: Gln to His) had reverted. CONCLUSIONS: The data suggest that C4a HEV71 strains introduced into the Central Plain of China are responsible for the recent outbreaks. The relationships among HEV71 isolates determined from the combined sequence and epidemiological data reveal the underlying seasonal dynamics of HEV71 circulation. At least 5 HEV71 lineages circulated in the Central Plain of China from 2007 to 2009, and the Shandong and Anhui lineages were found to have passed through a genetic bottleneck during the low-transmission winter season.