Development of a Portable Low-Cost System for the Metrological Verification of Wheelchair Roller Ergometers.

Wheelchair ergometers are widely used in research, clinical practice, and sports environments. The majority of wheelchair ergometers are roller systems that allow for wheelchair propulsion in the personal wheelchair on one or two (instrumented) rollers. Oftentimes these systems are only statically calibrated. However, wheelchair propulsion is dynamic by nature, requiring a dynamic validation process. The aim of the current project was to present a low-cost portable system for the dynamic metrological verification of wheelchair roller ergometers, based on an instrumented reference wheel. The tangential force on the roller is determined, along with its uncertainty, from the reference wheel properties, and compared with the force measured by the ergometer. Uncertainty of this reference wheel system was found to be lower than the one of the ergometer used, indicating that this novel approach can be used for the metrological verification of ergometers.

A novel push-pull central-lever mechanism reduces peak forces and energy-cost compared to hand-rim wheelchair propulsion during a controlled lab-based experiment.

BACKGROUND: Hand-rim wheelchair propulsion is straining and mechanically inefficient, often leading to upper limb complaints. Previous push-pull lever propulsion mechanisms have shown to perform better or equal in efficiency and physiological strain. Propulsion biomechanics have not been evaluated thus far. A novel push-pull central-lever propulsion mechanism is compared to conventional hand-rim wheelchair propulsion, using both physiological and biomechanical outcomes under low-intensity steady-state conditions on a motor driven treadmill. METHODS: In this 5 day (distributed over a maximum of 21 days) between-group experiment, 30 able-bodied novices performed 60 min (5 × 3 × 4 min) of practice in either the push-pull central lever wheelchair (n = 15) or the hand-rim wheelchair (n = 15). At the first and final sessions cardiopulmonary strain, propulsion kinematics and force production were determined in both instrumented propulsion mechanisms. Repeated measures ANOVA evaluated between (propulsion mechanism type), within (over practice) and interaction effects. RESULTS: Over practice, both groups significantly improved on all outcome measures. After practice the peak forces during the push and pull phase of lever propulsion were considerably lower compared to those in the handrim push phase (42 ± 10 & 46 ± 10 vs 63 ± 21N). Concomitantly, energy expenditure was found to be lower as well (263 ± 45 vs 298 ± 59W), on the other hand gross mechanical efficiency (6.4 ± 1.5 vs 5.9 ± 1.3%), heart-rate (97 ± 10 vs 98 ± 10 bpm) and perceived exertion (9 ± 2 vs 10 ± 1) were not significantly different between modes. CONCLUSION: The current study shows the potential benefits of the newly designed push-pull central-lever propulsion mechanism over regular hand rim wheelchair propulsion. The much lower forces and energy expenditure might help to reduce the strain on the upper extremities and thus prevent the development of overuse injury. This proof of concept in a controlled laboratory experiment warrants continued experimental research in wheelchair-users during daily life.

Assessment of Activity Pacing in Relation to Physical Activity and Health-Related Quality of Life in Adults with Multiple Sclerosis: A Foundation for Further Intervention Development.

BACKGROUND: Activity pacing is a behavioral strategy for coping with fatigue, optimizing physical activity (PA) levels, and achieving a paced approach to lifestyle and sustainable self-regulated exercise practice to optimize health and well-being. Yet little is known about how activity pacing affects PA and health-related quality of life (HRQOL) while controlling for fatigue and demographic characteristics over time in adults with multiple sclerosis (MS). This study examined the natural use of activity pacing and how it is associated with PA and HRQOL over time in adults with MS. METHODS: Sixty-eight adults with MS (mean ± SD age, 45.2 ± 10.9 years) completed questionnaires on their activity pacing, fatigue, PA, and HRQOL 14, 33, and 52 weeks after rehabilitation. Associations between the variables were examined using multilevel models. RESULTS: No associations were found between activity pacing and PA (ß = -0.01, P = .89) or between activity pacing and HRQOL (ß = -0.15, P = .09). CONCLUSIONS: This study provides an initial understanding of how activity pacing relates to PA and HRQOL in people with MS over time and indicates that there is no clear strategy among adults with MS that is successful in improving PA and HRQOL in the short or long term. Persons with MS may benefit from goal-directed activity pacing interventions to improve longitudinal engagement in PA, and the present study provides a foundation for further intervention development.

Heart Rehabilitation in patients awaiting Open heart surgery targeting to prevent Complications and to improve Quality of life (Heart-ROCQ): study protocol for a prospective, randomised, open, blinded endpoint (PROBE) trial.

INTRODUCTION: The rising prevalence of modifiable risk factors (eg, obesity, hypertension and physical inactivity) is causing an increase in possible avoidable complications in patients undergoing cardiac surgery. This study aims to assess whether a combined preoperative and postoperative multidisciplinary cardiac rehabilitation (CR) programme (Heart-ROCQ programme) can improve functional status and reduce surgical complications, readmissions and major adverse cardiac events (MACE) as compared with standard care. METHODS AND ANALYSIS: Patients (n=350) are randomised to the Heart-ROCQ programme or standard care. The Heart-ROCQ programme consists of a preoperative optimisation phase while waiting for surgery (three times per week, minimum of 3 weeks), a postoperative inpatient phase (3 weeks) and an outpatient CR phase (two times per week, 4 weeks). Patients receive multidisciplinary treatment (eg, physical therapy, dietary advice, psychological sessions and smoking cessation). Standard care consists of 6 weeks of postsurgery outpatient CR with education and physical therapy (two times per week). The primary outcome is a composite weighted score of functional status, surgical complications, readmissions and MACE, and is evaluated by a blinded endpoint committee. The secondary outcomes are length of stay, physical and psychological functioning, lifestyle risk factors, and work participation. Finally, an economic evaluation is performed. Data are collected at six time points: at baseline (start of the waiting period), the day before surgery, at discharge from the hospital, and at 3, 7 and 12 months postsurgery. ETHICS AND DISSEMINATION: This study will be conducted according to the principles of the Declaration of Helsinki (V.8, October 2013). The protocol has been approved by the Medical Ethical Review Board of the UMCG (no 2016/464). Results of this study will be submitted to a peer-reviewed scientific journal and can be presented at national and international conferences. TRIAL REGISTRATION NUMBER: NCT02984449.

National approaches to promote sports and physical activity in adults with disabilities: examples from the Netherlands and Canada.

PURPOSE: This study described how the Dutch and Canadian governments promote high performance sports, recreational sports, and physical activity (PA) among adults with disabilities on a national level. METHODS: An internet-based study was conducted to identify and select relevant documents and websites containing information about the national approach to promote disability sports and physical activities in the Netherlands and Canada. RESULTS: Both governments promote high performance sports in similar ways, but use different strategies to promote recreational sports and physical activities. The Dutch approach is characterized by using time-limited programs focusing on enhancement of sports infrastructure and inter-sector collaboration in which municipalities have key roles. The Canadian government promotes recreational sports in disabled populations by supporting programs via bilateral agreements with provinces and territories. Furthermore, the level of integration of disability sports into mainstream sports differs between countries. CONCLUSIONS: The findings of this study may inspire policy makers from different countries to learn from one another's policies in order to optimize national approaches to promote disability sports and PA on all levels. Implications for rehabilitation It is recommended for policy makers of national governments to develop and implement policy programs that promote sports and physical activities among people with disabilities because of its potential impact on functioning, participation, quality of life, and health. Insight into national approaches to promote sport and physical activities is relevant for rehabilitation practice to understand ongoing opportunities for people with disabilities to stay physically active after rehabilitation through participation in home and/or community-based sport and physical activities. It seems worthwhile to integrate activities to promote sport and physical activities in rehabilitation in such a way that it fits with the current governmental approach. It is recommended to set up international collaborations to develop and share knowledge about effective and sustainable national approaches to promote sports and physical activities among people with disabilities.

Case complexity in patients with chronic nonspecific musculoskeletal pain: a Delphi and feasibility study.

Assessment of case complexity in patients with chronic nonspecific musculoskeletal pain (CMP) is currently clinician based, not transparent, and with low reliability. The objective of this study was to explore case complexity and to initiate the development of a case complexity index (CCI). A three-round Delphi study among clinicians involved in multidisciplinary Pain Rehabilitation Programs was performed to identify important factors that are assumed to influence functioning in patients with CMP. The 10 most important factors were used to initiate the development of a CCI, with mean ratings of importance per factor as weights. The feasibility of the CCI was tested in a pilot study on 16 patients with CMP. In the first round, 166 factors were identified; in the second round, the 10 most important factors were selected; in the third round, relative weights of each factor were calculated, ranging from 1.75 (features of complaints) to 3.56 (psychiatric disorders) on a scale from 0 (no weight) to 4 (very heavy weight). The assessments for the factors were mainly based on clinical examination and reasoning. Clinicians could rate all patients using the CCI, which confirmed feasibility of the CCI. Ten, mainly psychosocial, factors were identified, which were assumed to be most important for the assessment of case complexity in a patient with CMP. With these factors, a CCI was created, for which feasibility was established. This CCI is transparent, easy to use, and might provide a basis for further development of a structured assessment of case complexity, which may have scientific and clinical relevance.

Design of a process evaluation of the implementation of a physical activity and sports stimulation programme in Dutch rehabilitation setting: ReSpAct.

BACKGROUND: There is a growing interest to study the transfer of evidence-based information into daily practice. The evidence-based programme Rehabilitation, Sports and Exercise (RSE) that aims to stimulate an active lifestyle during and after a rehabilitation period in people with a disability and/or chronic disease is prepared for nationwide dissemination. So far, however, little is known about the implementation of a new programme to stimulate physical activity in people with a disability in a rehabilitation setting. Therefore, a process evaluation of the implementation of the RSE programme within 18 Dutch rehabilitation centres and hospitals is performed in order to gain more insight into the implementation process itself and factors that facilitate or hamper the implementation process. This paper describes the study design of this process evaluation. METHODS: During a three-year period, the adoption, implementation and continuation of the RSE programme is monitored and evaluated in 12 rehabilitation centres and 6 hospitals with a rehabilitation department in The Netherlands. The main process outcomes are: recruitment, reach, dose delivered, dose received, fidelity, satisfaction, maintenance and context. The process outcomes are evaluated at different levels (organisational and patient) and different time points. Data collection includes both quantitative (online registration system and questionnaires) and qualitative (focus groups and semi-structured interviews) methods. DISCUSSION: The nationwide dissemination of an evidence-based programme to stimulate physical activity and sports during and after a rehabilitation period is extensively monitored and evaluated on different levels (organization and patients) using mixed methods. The study will contribute to the science of translating evidence-based programmes into daily practice of the rehabilitation care. The results of the study can be used to further optimize the content of the RSE programme and to facilitate the implementation in other health facilities. Furthermore, the results of the study can help future implementation processes in the rehabilitation setting. TRIAL REGISTRATION: The study is registered by The Netherlands National Trial Register: NTR3961.

Postural threat during walking: effects on energy cost and accompanying gait changes.

BACKGROUND: Balance control during walking has been shown to involve a metabolic cost in healthy subjects, but it is unclear how this cost changes as a function of postural threat. The aim of the present study was to determine the influence of postural threat on the energy cost of walking, as well as on concomitant changes in spatiotemporal gait parameters, muscle activity and perturbation responses. In addition, we examined if and how these effects are dependent on walking speed. METHODS: Healthy subjects walked on a treadmill under four conditions of varying postural threat. Each condition was performed at 7 walking speeds ranging from 60-140% of preferred speed. Postural threat was induced by applying unexpected sideward pulls to the pelvis and varied experimentally by manipulating the width of the path subjects had to walk on. RESULTS: Results showed that the energy cost of walking increased by 6-13% in the two conditions with the largest postural threat. This increase in metabolic demand was accompanied by adaptations in spatiotemporal gait parameters and increases in muscle activity, which likely served to arm the participants against a potential loss of balance in the face of the postural threat. Perturbation responses exhibited a slower rate of recovery in high threat conditions, probably reflecting a change in strategy to cope with the imposed constraints. The observed changes occurred independent of changes in walking speed, suggesting that walking speed is not a major determinant influencing gait stability in healthy young adults. CONCLUSIONS: The current study shows that in healthy adults, increasing postural threat leads to a decrease in gait economy, independent of walking speed. This could be an important factor in the elevated energy costs of pathological gait.

Energy cost of balance control during walking decreases with external stabilizer stiffness independent of walking speed.

Human walking requires active neuromuscular control to ensure stability in the lateral direction, which inflicts a certain metabolic load. The magnitude of this metabolic load has previously been investigated by means of passive external lateral stabilization via spring-like cords. In the present study, we applied this method to test two hypotheses: (1) the effect of external stabilization on energy cost depends on the stiffness of the stabilizing springs, and (2) the energy cost for balance control, and consequently the effect of external stabilization on energy cost, depends on walking speed. Fourteen healthy young adults walked on a motor driven treadmill without stabilization and with stabilization with four different spring stiffnesses (between 760 and 1820 Nm(-1)) at three walking speeds (70%, 100%, and 130% of preferred speed). Energy cost was calculated from breath-by-breath oxygen consumption. Gait parameters (mean and variability of step width and stride length, and variability of trunk accelerations) were calculated from kinematic data. On average external stabilization led to a decrease in energy cost of 6% (p<0.005) as well as a decrease in step width (24%; p<0.001), step width variability (41%; p<0.001) and variability of medio-lateral trunk acceleration (12.5%; p<0.005). Increasing stabilizer stiffness increased the effects on both energy cost and medio-lateral gait parameters up to a stiffness of 1260 Nm(-1). Contrary to expectations, the effect of stabilization was independent of walking speed (p=0.111). These results show that active lateral stabilization during walking involves an energetic cost, which is independent of walking speed.

Secondary health conditions in persons with a spinal cord injury for at least 10 years: design of a comprehensive long-term cross-sectional study.

PURPOSE: To describe the prevalence of secondary health conditions (SHCs) (urinary tract and bowel problems, pressure ulcers, spasticity, musculoskeletal and neuropathic pain, sexual dysfunction, respiratory and cardiovascular disorders) in persons with long-term spinal cord injury (SCI), and to explore the impact of SHCs on fitness, active lifestyle, participation and well-being. METHODS: A time since injury (TSI)-stratified cross-sectional study among 300 persons between 28- and 65-year-old with a SCI for at least 10 years. Strata of TSI are 10-19, 20-29, and 30 or more years. All eight Dutch rehabilitation centres with a SCI unit will participate. Participants will be invited for a 1-day visit to the rehabilitation centre for an aftercare check-up by the local SCI rehabilitation physician (neurological impairment, SHCs and management), physical tests by a trained research assistant (lung function, wheelchair skills, physical capacity), and they will be asked to complete a self-report questionnaire in advance. RESULTS: Not applicable. CONCLUSION: This study will provide knowledge on the health status and functioning of persons aging with SCI living in the Netherlands. This knowledge will help us to develop predictive models for the occurrence of SHCs and to formulate guidelines to improve health care for persons with long-term SCI.

Recommended measures for the assessment of cognitive and physical performance in older patients with dementia: a systematic review.

UNLABELLED: AIM/GOAL: To recommend a set of neuropsychological and physical exercise tests for researchers to assess cognition and physical fitness in clinical trials with older patients with dementia; to create consensus, decrease heterogeneity, and improve research quality. METHODS: A literature search (2005-2011) yielded 89 randomized controlled trials. To provide information on test recommendations the frequency of test use, effect size of the test outcome, study quality, and psychometric properties of tests were analyzed. RESULTS: Fifty-nine neuropsychological tests (cognitive domains: global cognition, executive functioning, memory, and attention) and 10 exercise tests (physical domains: endurance capacity, muscle strength, balance, and mobility) were found. CONCLUSION: The Severe Impairment Battery, Mini Mental State Examination, and Alzheimer Disease Assessment Scale - cognitive subscale were recommended to measure global cognition. The Verbal Fluency Test Category/Letters, Clock Drawing Test, and Trail Making Test-B were recommended to measure executive functioning. No specific memory test could be recommended. The Digit Span Forward, Digit Span Backward, and Trail Making Test-A were recommended to measure attention. As physical exercise tests, the Timed Up and Go and Six Meter Walk for mobility, the Six Minute Walk Distance for endurance capacity, and the Tinetti Balance Scale were recommended.

Validity of DynaPort GaitMonitor for assessment of spatiotemporal parameters in amputee gait.

Accelerometry can be used to objectively assess the walking ability of people with a lower-limb prosthesis inside and outside the laboratory setting. In this study, the validity of the DynaPort GaitMonitor software (McRoberts, The Hague, the Netherlands) for assessing spatiotemporal parameters of amputee gait was evaluated. Fourteen subjects with a lower-limb prosthesis walked on a straight level walkway at a self-selected walking speed over three different distances. During walking, we measured pelvis acceleration using a triaxial accelerometer (DynaPort MiniMod). Mean spatiotemporal parameters were derived from these signals using the DynaPort GaitMonitor software. Similar parameters were simultaneously determined from video. Overall, the number of steps, mean step time, step length, and walking speed were detected accurately by the GaitMonitor software. No systematic deviation was found, and the accuracy of the different parameters was within 6.5%. However, step times measured separately for both the intact and prosthetic legs differed considerably between the GaitMonitor and the video. Step time was systematically underestimated by the GaitMonitor for the intact leg and overestimated for the prosthetic leg. We concluded that the DynaPort GaitMonitor is a valid instrument for assessing mean spatiotemporal parameters in amputee gait, although systematic errors in prosthetic and intact heel strike detection prevent a reliable analysis of walking symmetry.

Power output and metabolic cost of synchronous and asynchronous submaximal and peak level hand cycling on a motor driven treadmill in able-bodied male subjects.

PURPOSE: To evaluate external power output and physiological responses of synchronous (SYNC) and asynchronous hand cycling (ASYNC) at submaximal and peak levels of exercise. METHODS: n=9 able-bodied male subjects (age: 20.1+/-2.1 years) performed two (sub)maximal continuous hand cycle exercise tests, using the SYNC and ASYNC mode in a standardized commercial add-on hand cycle unit (counter-balanced order). Treadmill speed (1.89 and 2.17 m s(-1)) and slope (steps of +1%) were changed in a fixed sequence of 3-min exercise steps. Gears were adjusted to 65 rpm. External power output (PO) was continuously monitored with a strain-gauge instrumented chain ring ((SRM) Schoberer Rad Messtechnik). A conventional wheelchair drag test was performed to validate mean external power for each speed-slope combination. Heart rate (HR; bpm) and oxygen uptake (VO2; ml kg(-1) min(-1), SMTP) were continuously monitored. Paired T-tests and ANOVA for repeated measures evaluated effects of mode and exercise level (p<0.05). RESULTS: Subjects reached peak levels of performance (RER: 1.05+/-0.07 versus 1.10+/-0.1 for SYNC and ASYNC). Peak PO and V(o2) were significantly higher for SYNC (81.6+/-11.8 W versus 68.5+/-10.6 W; 26.4+/-4.5 ml kg(-1) min(-1) versus 21.2+/-3.0 ml kg(-1) min(-1)). At submaximal exercise levels, gross mechanical efficiency (ME) was significantly higher for SYNC (12.1+/-0.9% versus 9.7+/-1.4% at 41 W). No significant differences were found for PO (at equal velocity and slope), as derived from the SRM (SYNC and ASYNC), and from the drag test. DISCUSSION: The absence of any differences in PO between SYNC and ASYNC, and with respect to the drag test, rules out 'additional external work due to maintain the desired heading' in the ASYNC as an explanation for the lower performance in this mode. Lower peak performance and ME in ASYNC may be explained by the increased stabilizing muscle effort in the upper extremities and trunk in order to combine power production with stable steering. ASYNC is less efficient compared to SYNC. Similarly, peak performance capacity was higher for SYNC. CONCLUSION: External work does not differ between SYNC and ASYNC hand cycling. SRM readings appear valid for PO monitoring in hand cycling within the studied range of PO. SYNC is more efficient than ASYNC and leads to higher peak performance.