Human health risk assessment framework for new water resource recovery-based bio-composite materials.

A new type of bio-composite material is being produced from water-recovered resources such as cellulose fibres from wastewater, calcite from the drinking water softening process, and grass and reed from waterboard sites. These raw materials may be contaminated with pathogens and chemicals such as Escherichia coli, heavy metals, and resin compounds. A novel risk assessment framework is proposed here, addressing human health risks during the production of new bio-composite materials. The developed framework consists of a combination of existing risk assessment methods and is based on three main steps: hazard identification, qualitative risk mapping, and quantitative risk assessment. The HAZOP and Event Tree Analysis methodologies were used for hazard identification and risk mapping stages. Then, human health risks were quantitatively assessed using quantitative chemical risk assessment, evaluating cancer and non-cancer risk, and quantitative microbial risk assessment. The deterministic and the stochastic approaches were performed for this purpose. The contamination of raw materials may pose human health concerns, resulting in cancer risk above the threshold. Microbial risk is also above the safety threshold. Additional analysis would be significant as future research to better assess the microbial risk in biocomposite production. The framework has been effectively used for chemical and microbial risk assessment.

Occurrence, removal, and risk assessment of polycyclic aromatic hydrocarbons and their derivatives in typical wastewater treatment plants.

Wastewater treatment plants (WWTPs) have a certain removal capacity for polycyclic aromatic hydrocarbons (PAHs) and their derivatives, but some of them are discharged with effluent into the environment, which can affect the environment. Therefore, to understand the presence, sources, and potential risks of PAHs and their derivatives in WWTPs. Sixteen PAHs, three chlorinated polycyclic aromatic hydrocarbons (ClPAHs), three oxidized polycyclic aromatic hydrocarbons (OPAHs), and three methylated polycyclic aromatic hydrocarbons (MPAHs) were detected in the influent and effluent water of three WWTPs in China. The average concentrations of their influent ∑PAHs, ∑ClPAHs, ∑OPAHs, and ∑MPAHs ranged from 2682.50 to 2774.53 ng/L, 553.26-906.28 ng/L, 415.40-731.56 ng/L, and 534.04-969.83 ng/L, respectively, and the effluent concentrations ranged from 823.28 to 993.37 ng/L, 269.43-489.94 ng/L, 285.93-463.55 ng/L, and 376.25-512.34 ng/L, respectively. The growth of heat transport and industrial energy consumption in the region has a significant impact on the level of PAHs in WWTPs. According to the calculated removal efficiencies of PAHs and their derivatives in the three WWTPs (A, B, and C), the removal rates of PAHs and their derivatives were 69-72%, 62-71%, and 68-73%, respectively, and for the substituted polycyclic aromatic hydrocarbons (SPAHs), the removal rates were 41-49%, 31-40%, and 33-39%, respectively; moreover, the removal rates of PAHs were greater than those of SPAHs in the WWTPs. The results obtained via the ratio method indicated that the main sources of PAHs in the influent of WWTPs were the combustion of coal and biomass, and petroleum contamination was the secondary source. In risk evaluation, there were 5 compounds for which the risk quotient was considered high ecological risk. During chronic disease evaluation, there were 11 compounds with a risk quotient considered to indicate high risk. PAHs and SPAHs with high relative molecular masses in the effluent of WWTPs pose more serious environmental hazards than their PAHs counterparts.

Environmental impact assessment via life cycle analysis on ultrafiltration membrane fabricated from polyethylene terephthalate waste to treat microalgal cultivation wastewater for reusability.

The current study had conducted the life cycle analysis (LCA) to assess the environmental impact of microalgal wastewater treatment via an integrated membrane bioreactor. The functional unit selected for this analysis was 1 kg of treated microalgal wastewater with contaminants eliminated by ultrafiltration membrane fabricated from recycled polyethylene terephthalate waste. Meanwhile, the applied system boundary in this study was distinguished based on two scenarios, namely, cradle-to-gate encompassed wastewater treatment only and cradle-to-cradle which included the reutilization of treated wastewater to cultivate microalgae again. The environmental impacts and hotspots associated with the different stages of the wastewater treatment process had clearly elucidated that membrane treatment had ensued the highest impact, followed by microalgal harvesting, and finally cultivation. Among the environmental impact categories, water-related impact was found to be prominent in the following series: freshwater ecotoxicity, freshwater eutrophication and marine ecotoxicity. Notably, the key performance indicator of all environmental impact, i.e., the global warming potential was found to be very much lower at 2.94 × 10-4 kg CO2 eq as opposed to other literatures reported on the LCA of wastewater treatments using membranes. Overall, this study had proffered insights into the environmental impact of microalgal wastewater treatment and its stimulus for sustainable wastewater management. The findings of this study can be instrumental in making informed decision for optimizing microalgal wastewater treatment and reutilization assisted by membrane technology with an ultimate goal of enhancing sustainability.

Microplastics contamination associated with low-value domestic source organic solid waste: A review.

Waste activated sludge and food waste are two typical important domestic low-value organic solid wastes (LOSW). LOSW contains significant organic matter and water content resulting in the transboundary transfer of liquid-solid-gas and other multi-mediums, such that the complexity of microplastics (MPs) migration should be of greater concern. This article provides a review of the literature focusing on the separation and extraction methods of MPs from LOSW. The occurrence and source of MPs are discussed, and the output and impact of MPs on LOSW heat and biological treatments are summarized. The fate and co-effects of MPs and other pollutants in landfills and soils are reviewed. This review highlights the migration and transformation of MPs in domestic source LOSW, and future perspectives focused on the development of a unified extraction and analysis protocol. The objective of this review is to promote the technological development of decontamination of MPs in LOSW by sufficient understanding of the fate of MPs, their interaction with coexisting pollutants and the development of targeted preventive research strategies.

Biosorption of zinc (II) from synthetic wastewater by using Inula Viscosa leaves as a low-cost biosorbent: Experimental and molecular modeling studies.

The use of biosorption as a strategy for lowering the amount of pollution caused by heavy metals is particularly encouraging. In this investigation, a low-cost and efficient biosorbent, Inula Viscosa leaves were used to remove zinc ions (Zn2+) from synthetic wastewater. A Fourier transform infrared spectroscopy experiment, a scanning electron microscopy experiment, and an energy dispersive X-ray spectroscopy experiment were used to describe the support. Several different physicochemical factors, such as the beginning pH value, contact duration, initial zinc concentration, biosorbent dose, and temperature, were investigated in this study. When the Langmuir, Freundlich, Temkin, Toth, and Redlich-Peterson models were used to match the data from the Inula Viscosa leaves biosorption isotherms, it was found that the biosorption isotherms correspond most closely with the Langmuir isotherm. On the other hand, the kinetic biosorption process was investigated using pseudo-first-order, pseudo-second-order (PS2), and Elovich models. The PS2 model was the one that provided the most accurate description of the biosorption kinetics. The thermodynamics process shows the spontaneous and endothermic character of Zn2+ sorption on Inula Viscosa leaves, which also entails the participation of physical interactions. In addition, the atom-in-molecule analysis, density functional theory, and the conductor like screening model for real solvents, were used to investigate the relationship that exists between quantum calculations and experimental outcomes.

Number of COVID-19 cases required in a population to detect SARS-CoV-2 RNA in wastewater in the province of Alberta, Canada: Sensitivity assessment.

With a unique and large size of testing results of 1,842 samples collected from 12 wastewater treatment plants (WWTP) for 14 months through from low to high prevalence of COVID-19, the sensitivity of RT-qPCR detection of SARS-CoV-2 RNA in wastewater that correspond to the communities was computed by using Probit analysis. This study determined the number of new COVID-19 cases per 100,000 population required to detect SARS-CoV-2 RNA in wastewater at defined probabilities and provided an evidence-based framework of wastewater-based epidemiology surveillance (WBE). Input data were positive and negative test results of SARS-CoV-2 RNA in wastewater samples and the corresponding new COVID-19 case rates per 100,000 population served by each WWTP. The analyses determined that RT-qPCR-based SARS-CoV-2 RNA detection threshold at 50%, 80% and 99% probability required a median of 8 (range: 4-19), 18 (9-43), and 38 (17-97) of new COVID-19 cases /100,000, respectively. Namely, the positive detection rate at 50%, 80% and 99% probability were 0.01%, 0.02%, and 0.04% averagely for new cases in the population. This study improves understanding of the performance of WBE SARS-CoV-2 RNA detection using the large datasets and prolonged study period. Estimated COVID-19 burden at a community level that would result in a positive detection of SARS-CoV-2 in wastewater is critical to support WBE application as a supplementary warning/monitoring system for COVID-19 prevention and control.

Evaluation of eight psychoactive drugs used in Chinese cities by wastewater-based epidemiology.

With rapid economic development, an increasing number of people suffer from mental health diseases, which are gradually receiving the attention of society. However, basic data from surveys of mental disorders are limited. Composite influent samples were collected from 26 wastewater treatment plants in 23 major cities in China. The concentrations of the psychoactive drugs diphenhydramine, fluoxetine, doxepin, imipramine, sulpiride, zolpidem, carbamazepine, and flunitrazepam in the wastewater were determined. The detection frequency of diphenhydramine, sulpiride, and carbamazepine was close to 100 %, whereas that of the compounds was lower than 35 %. Carbamazepine had the highest mean consumption (31.1 mg/d/1000 people), followed by diphenhydramine (10.4 mg/d/1000 people) and sulpiride (11.3 mg/d/1000 people). Wastewater-based epidemiology (WBE) estimates of the average use of the three drugs were lower than those from the drug statistics data. Consumption of diphenhydramine in northern China was higher than that in southern China. A correlation analysis of psychotropic and illicit drugs revealed a correlation between sulpiride and heroin use, which may be related to the adverse effects of sulpiride treatment after heroin withdrawal. Psychotropic drug use is associated with both economic and social factors. We found associations between the use of the three drugs and age, occupation, and obesity, which are risk factors for mental disorders. The results showed that the monitoring of psychotropic drug using WBE has a certain reference value for public health care and for improving the understanding of mental disorders.

In vitro bioanalytical assessment of the occurrence and removal of bioactive chemicals in municipal wastewater treatment plants in Korea.

Effluents of wastewater treatment plants (WWTPs) contain various organic micropollutants, some of which can exert negative effects on the quality of receiving waters or drinking water sources. This study monitored two full-scale WWTPs in Korea for the occurrence and removal of bioactive chemicals for a one-year period using a battery of in vitro bioassays as a complementary approach to chemical analysis. Bioassays covering different endpoints were employed, such as hormone receptor activation (AR and ERα), xenobiotic metabolism (PAH and PXR), oxidative stress response (Nrf2), and cytotoxicity. The WWTP influents showed AR, ERα, and PAH activities at ng/L - µg/L and PXR and Nrf2 activities at µg/L - mg/L as bioanalytical equivalent concentrations of a reference compound for each bioassay. These bioactivities decreased along with the WWTP treatment train, with significant removals achieved by the secondary biological treatment processes. Cytotoxicity was observed only for some municipal wastewater (M-WWTP) influents but was below the limit of quantification for most cases. The influent and effluent bioactivities observed in this study were mostly comparable to those reported in other WWTPs in the literature. Comparison of the bioactivities with the effect-based trigger (EBT) values indicates that the impact of WWTP effluents on receiving water quality was low for most endpoints. For Nrf2, however, further investigation is required to evaluate the observed high bioactivities compared with the current EBT. The observed ERα activity could partly be explained by the presence of some steroid estrogens. Overall, our results contribute to an important database for the concentrations and removal efficiencies of bioactive chemicals in WWTPs and demonstrate bioassays as a useful tool for urban water quality monitoring.

Eco-geological consequences of textile processing wastes: Risk assessment, elemental dissolution kinetics, and health hazard potential.

Although substantial quantities of toxic wastes are generated from textile industries, the characteristics of textile processing wastes (TPWs) have yet scantily been investigated from ecological and agricultural perspectives. Here, the eco-geological consequences of TPWs are evaluated by considering three types of sludges (i.e., silk fibre sludge (SFS), dye mixed silk processing sludge (DSPS), and cotton processing wastewater sludge (CPWS)). The predominance of certain components between different wastes (e.g., fibrous substances in silk industry wastes (i.e., SFS and DSPS) and amorphous materials in cotton processing wastes (i.e., CPWS)) is accounted for by the use of different raw materials in different industries. According to the FTIR and other characterization analyses, all three types of TPWs were rich in carbonaceous compounds and nutrients (e.g., CNPK) because of their biological origin. Further, high accumulation of toxic metals (e.g., Cd, Cr, Cu, Zn, Pb, and Mn) was apparent with chemical-processing routes. The principal component analysis indicated strong relationships between certain environmental variables (e.g., moisture content and bulk density) and bioavailability of several metals (e.g., Cd, Zn, Cu, and Mn), while C levels in TPWs were tightly associated with Cr levels. According to the Visual MINTEQ model, the dissolution-precipitation dynamics of potentially toxic elements (e.g., Pb, Cr, and Zn) in TPWs are predicted to be controlled by the levels of phosphates/chlorides/sulphates in line with the textile processing steps employed in different factories. The great toxicity potential of CPWS (e.g., relative to SFS and DSPS) is recognized to pose significant metal-induced hazards to ecosystems and human health over time. Among the three TPWs, SFS could be prescribed for agricultural application after proper treatment (e.g., via valorization techniques) with the aid of its benign nature and high nutrient (Total N: 3.83%; available P: 118.6 mg kg-1) value.

Wastewater analysis and drug consumption: useful assessment tool.

Abstract: Drug use in Europe is now more than ever a multifaceted issue involving a broad and ever-changing range of substances. Alarmingly, recent European Monitoring Centre for Drugs and Drug Addiction (EMCDDA) reports show that roughly 83 million adults aged between 15 and 64 years in the European Union have used illicit substances at least once in their lifetime. Polydrug use is rife, and consumption patterns range from experimental/occasional, habitual use all the way to addiction. Traditional epidemiological methods delineating drug abuse specifics (i.e. number of users, age groups, specific characteristics and patterns of use) are questionnaire-based and therefore present the classic biases linked to the selected sample, thus risking an underesti-mation of the phenomenon. The Mario Negri IRCCS Pharmacological Research Institute has developed a new population screening method based on wastewater-based epidemiology (WBE) which makes it possible to detect drug metabolites in waste water and to estimate which and how many substances are consumed by the entire population belonging to the wastewater treatment plant being monitored. Such a technique has gained great interest at the national and international level, and may be especially valuable as a detection/monitoring tool at a time when novel psychoactive substances have come to trigger a major public health crisis, on account of their elusiveness and potential as substitutes/adulterants of traditional substances of abuse.

Assessment of the application of cladode cactus mucilage flocculants for hot chemical degreasing electroplating wastewater treatment and reuse: process efficiency and storage stability.

Pressures related to urban growth and industrial activities exacerbated by climate change had an impact on water resources in Tunisia. The present study examines the application of cladode cactus mucilage (CCM) flocculants for hot alkaline chemical degreasing Zn-electroplating wastewater treatment and reuse (WWTR). The CCM flocculation process was selected through their environmental benefits, economic facilities, sustainable use of the natural biopolymer product, input biopolymers substitution, and on-site treated wastewater (TWW) reuse and recovery. The alum coagulation and CCM flocculation were performed by the jar test series. The suitability of treated wastewater quality (TWWQ) with alum/CCM was also assessed for reuse purpose in terms of corrosion-scaling indices (RSI, LSI, PSI, AI), oxidation-reduction potential (ORP), and microbiological community growth (Bacillus, Pseudomonas, Mesophilic bacteria and yeasts) for 28 days storage at 25 °C. The total alkalinity removal efficiency reached 95.8% with an optimum dosage of alum + CCM for hot alkaline chemical degreasing wastewater bath rinsing. The results showed that the stability of TWWQ has significantly deteriorated during storage leading to aggressive wastewater, pathogen growth, and biological malodor production which make them unsuitable for reuse. Therefore, there is a need for CCM processing alternatives that preserve the physico-chemical and microbial of TWW properties during storage.

A holistic assessment of the sources, prevalence, and distribution of bisphenol A and analogues in water, sediments, biota and plastic litter of the Ebro Delta (Spain).

Bisphenol A (BPA) is one of the main ubiquitous compounds released from plastics in the environment. This compound, considered an endocrine disruptor, poses a risk to aquatic wildlife and human population, being included in multiple environmental monitoring programmes. Following the regulations restricting BPA use in the last years, BPA-like chemicals have been produced and used as BPA substitutes. However, they are not commonly included in monitoring programs yet and their presence is thus misrepresented, despite showing similar endocrine disrupting potential. In this work, an analytical method for analysing bisphenol A and five of its analogues (Bisphenol S, B, F, AF and Tetrabromobisphenol A) is described, validated for water (riverine, sea and wastewater), sediment, and biota (fish and biofilm) and applied to monitor their presence in the Ebro River Delta (NE Spain). In addition, plastic litter was also collected to evaluate their role as potential source of bisphenols. All compounds except BPF were detected in the analysed samples. Wastewater treatment plants (WWTPs) were discarded as major sources of BPs into the natural aquatic environment, as no BPs were detected in treated effluents. Indeed, the high levels of BPs in the natural environment could be related with direct discharge of raw wastewater from small rural population nucleus. The analysis of riverine plastic leachates yielded 4 out of the 6 BPs analysed, strengthening the hypothesis that plastic debris are also a source of BPs in the natural environment. Whereas Bisphenol S and BPA were detected in water and, to a limited extent, in biota, less polar analogues (mainly BPAF and TBBPA) were not found in any of the water samples. Instead, these hydrophobic BPs were found in fish tissues and biofilm, pointing out plastics and microplastics as their possible vectors. Finally, biofilm demonstrated its potential as sentinel of chemical contamination in freshwater environment.

Quantitative assessment and optimization of bi-functional membrane for remediation of Cr(VI) from wastewater.

This paper explores the innovative approach of using a green route synthesized cost-effective bi-functional to eliminate toxic hexavalent chromium commonly found in tannery wastewater by using an integrated application of membrane and photocatalyst. Contaminated wastewater is firstly passed through bi-functional ultrafiltration membranes to retain hexavalent chromium and further reducing the toxicity of rejected water having high concentrations of Cr(VI) by photocatalytic reduction into Cr(III) in the presence of sunlight using the same membrane as photocatalyst film. Conditions governing the separation process such as solution pH, nanoparticle loading in polymer matrix, and concentration of Cr(VI) have been optimized to maximize the % rejection and photocatalytic reduction to Cr(III). The purpose of this work was to optimize the process condition through the use of the response surface method (RSM) that governs the process. RSM analysis concludes that excellent rejection of 91.58% and reduction of 87.02% is possible at the predicted pH (5.55), particle loading (2.14%) and Cr(VI) concentration (25 mg/L).

Assessment of Bacterial Diversity of Industrial Poultry Wastewater by Denaturing Gradient Gel Electrophoresis (DGGE) and the Cultivation Method in Order to Inform Its Reuse in Agriculture.

Effluents discharged by poultry meat industries are heavily polluted with raw materials, such as fat, blood residues, and proteins. Thus, untreated effluents directly discharged into the environment may constitute a public health threat. This study aims to evaluate the bacterial diversity of three water qualities: industrial poultry wastewater (PWW), tap water (TW), and PWW diluted with TW (50 : 50) (V/V) (TWPWW) by the combination of culture-independent and culture-dependent approaches. The total bacterial DNA was extracted using phenol/chloroform method. The hypervariable 16S rRNA region V3-V5 was amplified by PCR using universal primers. The amplicons were separated by vertical electrophoresis on a polyacrylamide gel of increasing denaturing gradient according to their richness in GC bases. Selected bands were reamplified and sequenced. Pure isolated bacteria from nutrient agar medium were characterized according to their morphological and biochemical characteristics. Genomic DNA from pure strains was extracted by boiling method, and a molecular amplification of the 16S-23S ITS region of the 16S rRNA gene was performed using the universal primers. Selected isolates were identified by sequencing. Results showed a high bacterial load and diversity in PWW in comparison with TW and TWPWW. A collection of 44 strains was obtained, and 25 of them were identified by sequencing. Proteobacteria represented 76% of isolated bacteria Gamma-Proteobacteria was the predominate isolate (68%). Other isolates were Firmicutes (8%), Bacteroidetes (12%), and Actinobacteria (8%). These isolates belong to different genera, namely, Pseudomonas, Acinetobacter, Proteus, Empedobacter, Corynebacterium, Enterobacter, Comamonas, Frondibacter, Leclercia, Staphylococcus, Atlantibacter, Klebsiella, and Microbacterium.

A techno-economic assessment of nutrient recovery from wastewater using microalgae: scenario in India collected from published literature.

The true potential of the microalgae-based wastewater treatment (MWT) process is determined based on whether the process will provide a positive energy output and whether it is economically viable. The objectives of this study are dynamic modelling of microalgae growth based on initial wastewater concentration, temperature, solar radiation and a techno-economic assessment for an MWT scheme for application in a hot, dry climate. Through reference to relevant literature data on MWT in the Indian subcontinent, a selection of appropriate microalgal species Chlorella and Scenedesmus was made. The dynamic model developed was successfully calibrated and validated using independent experimental data collected from the published literature. Cost of production of bio-crude from microalgae grown in a hybrid photobioreactor and pond system in kitchen wastewater of Indian Institute of Technology, Hyderabad was calculated. A break-even selling price (BESP) of US$0.549/kg was obtained for the microalgae biomass. The cost of production of 1 L bio-crude was US$0.96 (Rs 69-74), which is comparable with crude oil cost. The model developed can be used by practising engineers to predict biomass growth and nutrient removal, thereby achieving a break-even point for cost efficiency.

Distribution characteristics and ecological risk assessment of heavy metals in sediments of Shahe reservoir.

Shahe Reservoir of Northern Canal Basin was selected as the study area. Nineteen surface (0~20 cm) sediment samples and three sediment core samples were collected to analyze the spatial distribution characteristics of As, Cd, Cu, Mn, Pb and Zn in the sediments. The geo-accumulation index, potential ecological risk index and risk assessment code were used to evaluate heavy metal pollution, as well as its potential risk was analyzed according to the speciation of heavy metals. Results showed that the average enrichment factors of heavy metals compared to the background value in soil of Beijing were ranked at the order as the point source pollution area > the central area of the reservoir > the downstream area of the reservoir > the Nansha River > the upstream area of the reservoir > the Beisha River, namely, 2.57 times, 2.06 times, 1.97 times, 1.95 times, 1.87 times and 1.85 times, respectively. The sediment core samples in the central area of the reservoir and the inlet of the Beisha River showed a trend of increasing firstly and then decreasing with the change of depth. Pollution assessment results showed that sediment was moderately contaminated or moderately to strongly contaminated by As, but the other heavy metals were not polluted or lightly polluted. The potential ecological risk index of all sampling sites was less than 150, showing a low ecological risk. As Cr and Cu were mainly in the speciation of residues, with low bioavailability. Although the content of Mn and Zn were low, they showed high bioavailability. Based on correlation analysis and principal component analysis, it was speculated that the sources of various heavy metal pollution in the sediment were similar, which were possibly input from the external wastewater. The heavy metals in sediment were positively related to nutrients and organic matter, indicating that all of them were mostly from the same point polluted sources.

Monitoring and assessment of Dracaena-based constructed vertical flow wetlands treating textile dye wastewater.

The monitoring and assessment of multiple constructed vertical flow wetlands (CVFWs) treating textile dye wastewater (metanil yellow as dye) are studied covering three seasons. Three CVFWs (CVFW-1, dye-5 mg/l; CVFW-2, dye-50 mg/l; and CVFW-3, dye-100 mg/l) and a control (dye-5 mg/l) were used. The CVFWs with Dracaena (an ornamental plant) efficiently removed contaminants like dye, COD, NH4+-N, and PO43--P from the wastewater under varying inlet dye concentrations, indicating its dependence on meteorological conditions. Substantial dye removal was observed to be maximum in summer (control, 44.3%; CVFW-1, 75.1%; CVFW-2, 76.1%; CVFW-3, 46%), but lesser in winter (control, 45%; CVFW-1, 73.1%; CVFW-2, 76.8%; CVFW-3, 42.6%) and minimum in monsoon (control, 40.8%; CVFW-1, 63.5%; CVFW-2, 51.6%; CVFW-3, 37.1%), respectively. Efficiency was less in CVFW-3 as it observed plant stress due to higher inlet dye concentration. COD removal was higher in winter, followed by summer and monsoon. A first-order kinetic model was used to investigate the efficiency of the CVFW system w.r.t. contaminant removal. Various functional groups were characterized using Fourier transform infrared spectroscopy (FTIR) from the inlet and outlet water samples of different CVFWs. The Dracaena accumulated various elements and oxides during the treatment with no stress on its health. No effects on plant health highlight the suitability of Dracaena for textile wastewater treatment. The results were validated using statistical tools like the Mann-Whitney U test and principal component analysis (PCA).

Microplastic contamination in processed and unprocessed sea salts from a developing country and potential risk assessment.

In aquatic environments, microplastics (MPs) are pervasive which could have a considerable negative impact on the environment, organisms and pose a risk to human health. However, knowledge about the exposure and ecological risk of MPs in the coastal ecosystems of developing countries is limited. In this study, we analyzed salt samples from five commonly consumed processed and unprocessed sea salts of different commercial brands originated from 15 salt pans in Bangladesh to assess the abundance, characteristics and potential risks of MPs. The quantities of MPs in unprocessed salts (average 195 ± 56 item/kg) were higher than those in the processed salts (average 157 ± 34 item/kg). One-way analysis of variance (ANOVA) showed significant (p < 0.05) differences among the average numbers of MPs in both processed and unprocessed salts. MP levels in this study were 2-3 times higher than those reported from some other countries. Fiber-shaped and transparent MPs were dominant in both cases. MPs less than 0.5 mm in size were the most abundant in both unprocessed (58.2%) and processed (62.2%) salts. Fourier-transform infrared spectroscopy (FTIR) analysis confirmed five types of polymers, including polyethylene terephthalate (PET-35%), polypropylene (PP-27.5%), polyethylene (PE-25%), polystyrene (PS-10%), and Nylon (2.5%) in the studied salts. The sea salts were classified as potential hazard index (PHI) levels IV to V, indicating serious MP contamination, whereas potential ecological risk factor (Ei), potential ecological risk index (RI), and pollutant load index (PLI) indicated moderate levels of pollution of MPs. Domestic and municipal wastewater effluents to Bay of Bengal and fishing activities may attributed to presence of MPs in the sea salt. These findings can be used by consumers, salt industries and policy makers to reduce MPs levels during consumption, production and policymaking.

Resource recovery from municipal wastewater: A critical paradigm shift in the post era of activated sludge.

The conventional activated sludge (CAS) process as one of the greatest engineering marvels has made irreplaceable contributions towards the human development in the past one hundred years. However, the underlying principle of CAS which is primarily based on biological oxidation has been challenged by accelerating global climate change. In such a situation, a fundamental question that urgently needs to be answered is what wastewater treatment technology would be in the post era of activated sludge? Thus, this article illustrates the necessity of a technology paradigm shift from the current linear economy to circular economy with the energy and resource recovery from municipal wastewater being a major driver. It is argued that ammonium recovery should be considered towards the sustainable municipal wastewater reclamation. Meanwhile, the potential novel processes with enhanced energy and resource recovery are also discussed, which may offer useful insights into the ways to achieve the carbon-neutral municipal wastewater reclamation.

Potentially Toxic Metal Accumulation in Spinach (Spinacia oleracea L.) Irrigated with Industrial Wastewater and Health Risk Assessment from Consumption.

This study aimed to determine the potentially toxic metal contents in soil and spinach samples in areas irrigated with industrial wastewater and to evaluate the potentially toxic metal accumulation in spinach samples according to pollution indices. Water, soil and spinach samples were analysed using atomic absorption spectrophotometer (Perkin-Elmer AAS-300). In this study, it was determined that the potentially toxic metal values ​​in the spinach samples irrigated with groundwater and sugar industry wastewater varied between 1.59 and 1.84, 0.22-0.68, 0.56-1.14, 1.41-1.56, 1.62-3.23, 0.57-1.02, 0.86-1.33, 0.20-0.32 and 0.35-2.10 mg/kg for Cd, Co, Cr, Cu, Fe, Ni, Pb, Zn and Mn, respectively. It was concluded that the difference between the metal values ​​in the spinach samples according to the irrigation sources was statistically significant, except for Cu and Pb (p > 0.05). According to the results of this study, there is no health risk for Pb, Co and Cr with HRI values ​​below 1.0, while there is a risk for Cd, Cu, Fe, Ni, Mn and Zn. The much higher HRI values ​​of Cd than 1 (196.8 and 169.6) suggested that this metal is likely to cause significant health problems in the region.