Environmental, economic, and social impacts of sugar cane bagasse and eggshell wastes for soil stabilization.

Sustainability is a core topic for all sectors including geotechnical engineering (e.g., design of foundations, earthworks structures, and pavements for major infrastructure and building projects). Despite being comprised of environmental, economic, and social pillars, most sustainability studies in this area have focused on the first. Furthermore, social impacts and the three pillars integration are little explored. As a result, there is a lack of systemic and holistic assessments of innovative geotechnical alternatives. This research advances in this area by performing a complete sustainability assessment and integration of the environmental, economic, and social pillars of two expansive soil stabilization alternatives: (i) sugar cane bagasse ash combined with hydrated eggshell lime alkali-activated by sodium hydroxide (NaOH) and (ii) Portland cement. Individual analyses were carried out to determine the environmental, economic, and social impacts, and the single sustainability index. Alkali-activated binder dosages showed higher impacts in 4 out of 10 environmental categories. For both binders, high-density/low-binder dosages contributed to environmental and economic sustainability as they require lower quantities of raw materials and diesel for materials transportation. The total costs of alkali-activated binder dosages ($189.79 and $154.45) were higher than that of Portland cement ($72.49 and $54.04), mainly due to the high cost of NaOH acquisition. However, the alkali-activated binder dosages implied lower carbon dioxide (CO2) emissions and thus lower social cost of CO2. The alternative binder presented a higher positive social impact. The alkali-activated high-density/low binder dosage is the most sustainable soil stabilization strategy.

Reclaimed seawater discharge - Desalination brine treatment and resource recovery system.

With the proliferation of reverse osmosis technology, seawater reverse osmosis desalination has been heralded as the solution to water scarcity for coastal regions. However, the large volume of desalination brine produced may pose an adverse environmental impact when directly discharged into the sea and result in energy wastage as the seawater pumped out is dumped back into the sea. Recently, zero liquid discharge has been extensively studied as a way to eliminate the aquatic ecotoxicity impact completely, despite being expensive and having a high carbon footprint. In this work, we propose a new strategy towards the treatment of brine to seawater level for disposal, dubbed reclaimed seawater discharge (RSD). This process is coupled with existing resource recovery techniques and waste alkali CO2 capture processes to produce an economically viable waste treatment process with minimal CO2 emissions. In this work, we placed significant focus on the electrolysis of brine, which simultaneously lowers the salinity of the desalination brine (56.0 ± 2.1 g/L) to seawater level (32.0 ± 1.4 g/L), generates alkali brine from seawater (pH 13.6) to remove impurities in brine (Mg2+ and Ca2+ to below ppm level), and recovers magnesium hydroxide, calcium carbonate, chlorine, bromine, and hydrogen gas as valuable resources. The RSD is further chemically dechlorinated and neutralised to pH 7.3 to be safe to discharge into the sea. The excess alkali brine is used to capture additional CO2 in the form of bicarbonates, achieving net abatement in climate change impact (9.90 CO2 e/m3) after product carbon abatements are accounted.

Eco-toxicity assessment of industrial by-product-based alkali-activated binders using the sea urchin embryogenesis bioassay.

New cement-based materials such as alkali-activated binders (AABs) or geopolymers allow the incorporation of waste or industrial by-products in their formulation, resulting an interesting valorization technique. Therefore, it is essential to inquire about the potential environmental and health impacts throughout their life cycle. In the European context, a minimum aquatic toxicity tests battery has been recommended for construction products, but their potential biological effects on marine ecosystems have not been considered. In this study, three industrial by-products, PAVAL® (PV) aluminum oxide, weathered bottom ash (WBA) resulting from incinerator bottom ash and glass cullet recycling waste (CSP), were evaluated as precursors in the AAB formulation from an environmental point of view. To determine the potential effects on marine environment caused by the leaching of contaminants from these materials into seawater, the leaching test EN-12457-2 and an ecotoxicity test using the model organism sea urchin Paracentrotus lividus were conducted. The percentage of abnormal larval development was selected as endpoint of the toxicity test. Based on the results obtained from the toxicity tests, AABs have less damaging impact (EC50 values: 49.2%-51.9%) on the marine environment in general than raw materials. The results highlight the need to stablish a specific battery of toxicity tests for the environmental assessment of construction products on marine ecosystem.

Enzymatic production of xylooligosaccharides from corn cobs: Assessment of two different pretreatment strategies.

Corn cobs (CCs) are abundant xylan-rich agricultural wastes. Here, we compared CCs XOS yields obtained via two different pretreatment routs, alkali and hydrothermal, using a set of recombinant endo- and exo-acting enzymes from GH10 and GH11 families, which have different restrictions for xylan substitutions. Furthermore, impacts of the pretreatments on chemical composition and physical structure of the CCs samples were evaluated. We demonstrated that alkali pretreatment route rendered 59 mg of XOS per gram of initial biomass, while an overall XOS yield of 115 mg/g was achieved via hydrothermal pretreatment using a combination of GH10 and GH11 enzymes. These results hold a promise of ecologically sustainable enzymatic valorization of CCs via "green" and sustainable XOS production.

Optimization of alkali, acid and organic solvent pretreatment on rice husk and its techno economic analysis for efficient sugar production.

Excessive use of fossil fuels has accelerated climate change and global warming necessitates the need for renewable energy sources that have a lower environmental impact. In the recent decade, lignocellulosic biomass has become a prominent alternative to renewable energy resources for the production of bioenergy. The pretreatment procedure is considered a pivotal step for transforming biomass into value-added products such as sugars, biofuels, etc. Therefore, the present work aims to study the effect of different pretreatment approaches on rice husk with acids (H2SO4 and HCl), alkalis (NaOH and KOH), and organic solvents (ethanol and methanol) utilizing different concentrations like (2, 4 and 6% in case of acids), (2,4 and 6% for alkalis) and (50% and 70% for organic solvents) with different residence time (1, 3, 6, and 24 h). The most effective results obtained from the aforementioned steps were further adopted for enzymatic hydrolysis. Further, the changes in structural properties of biomass were assessed in relation to the pretreatment process employing scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier Transform Infrared (FTIR) analyses. This paper also highlights the techno-economic analysis of alkali pretreatment. Additionally, the operational targets for the process were identified by using a modeling software-SuperPro Designer. Results obtained from the study showed a maximum yield of reducing sugar i.e., 1.906 ± 0.2 mg/ml (4% NaOH with 6 h of incubation). This study demonstrates that 4% NaOH pretreatment effectively disintegrates the biomass and yields high sugar recovery which can be used further for the production of biofuels and value-added products.

Synthesis of waste limestone powder-based alkali-activated binder: experimental, optimization modeling, and eco-efficiency assessment.

More than half of the CO2 emissions during the manufacturing of ordinary Portland cement (OPC) occur due to the calcination of calcium carbonate in addition to burning of fossil fuel to power the process. Consequently, there is a concerted effort to decrease the carbon footprint associated with this process, by minimizing the use of OPC. In line with this trend, an attempt was made in the reported study to synthesize a novel alkali-activated binder using CaCO3-rich waste limestone powder (WLSP) as a precursor. Utilizing the Taguchi method, four important parameters were varied at three levels to optimize the alkali-activated mixture. Analysis of variance (ANOVA) of the obtained results was performed to assess the impact of each of the factors on the properties of the developed binder. To enhance the strength further, OPC was added as a partial replacement of WLSP. The binder was characterized using scanning electron microscopy. The results have indicated that alkaline activator to binder ratio, Na2SiO3 to NaOH ratio, and sand to binder ratio of 0.575, 1.57, and 2.5, respectively, were the optimum to obtain satisfactory strength and workability with a 13.7-M NaOH activator solution. The incorporation of a small quantity of OPC in the mixture remarkably improved the density and strength of the alkali-activated-WLSP binder. Pirssonite (CaCO3.Na2CO3.2H2O) and C/N-A-S-H were the dominant mineral phases formed in the developed binder, particularly in the ones alkali-activated WLSP/OPC. In addition, the eco-efficiency assessment revealed that the WLSP is a promising low-carbon binder that can be used in developing more sustainable alkali-activated binder. The results have shown that the WLSP can be potentially utilized in developing binder that can be potentially used in the structural applications.

Engineered and green natural pozzolan-nano silica-based alkali-activated concrete: shrinkage characteristics and life cycle assessment.

Alkali-activated concrete (AAC) or binders (AABs) have emerged as a substitute to conventional ordinary Portland cement (OPC)-based concrete owing to their techno-ecological merits. Saudi Arabia has vast resources of natural pozzolan whose impact on some fresh and hardened properties was encouraging; however, the long-term shrinkage behavior of AABs and life cycle assessment (LCA) of the developed product is yet to be explored. Therefore, this study evaluates shrinkage characteristics and LCA of Saudi natural pozzolan (NP)-based AAC. The synergistic impact of admixing nano-silica (NS) up to 7.5% dosage was also observed on the properties of engineered AABs in comparison with OPC-based concrete. The shrinkage properties were correlated with the microstructure and pore structure. The study revealed that the shrinkage properties of both NP-based AABs and OPC-based concrete are comparable. However, adding NS increased the drying shrinkage strain because of the finer pore structure than AABs without NS, which was confirmed through nuclear magnetic resonance (NMR). The maximum average drying shrinkage strain of 510 µÎµ was recorded in the OPC concrete, whereas in the engineered AAC with 0, 1, 2.5, 5, and 7.5% NS, it was 486, 537, 568, 601, and 651 µÎµ, respectively. It is postulated that the NP can be beneficially valorized in the production of green AABs without compromising the shrinkage characteristics, while the NS is favorable for enhancing the strength and refinement of the pore matrix. Besides, the LCA indicated the feasibility of recycling the high volume of natural waste by AAB technology, which significantly lowers the carbon footprints and minimizes the environmental implications in infrastructural applications.

Valorizing (cleaned) sulfidic mine waste as a resource for construction materials.

Proper management and storage of mine waste, e.g., tailings and waste rock, is one of the main issues that mining industries face. Additionally, there is already an uncountable amount of existent historical mine waste, which may, even centuries after the closure of the mine, still be leaching contaminants into the environment. One solution to minimize the risks associated with the mine waste, with also potential economic benefits, is through the valorization of the waste. This can be done by first recovering valuable metals and removing hazardous contaminants. Then, the remaining residue can be valorized into green construction materials, such as geopolymers, ceramics or cement. For some mine waste materials, such as those with only trace levels of metals that are not economically viable to extract, the "waste" can be reused directly without this additional cleaning step. In the present study, mine waste originating from three different sites was characterized and compared with the cleaned mine waste (i.e., cleaned by bioleaching or flotation methods) and with different types of green construction materials containing 13-80 wt% (cleaned and uncleaned) mine waste. Particular emphasis was given to the mobilization of metal(loid)s from the mine waste and construction materials (i.e., ceramics, alkali-activated materials and cement) under different conditions, through a series of leaching tests (i.e., EN 12457-2, US EPA's Toxicity Characteristic Leaching Procedure, and a pH-dependent leaching test). The leaching tests were applied to either mimic current 'natural' conditions at the mining site, conditions in a landfill (end of life) or extreme conditions (i.e., extremely acidic or alkaline pH). Most of the original mine waste samples contain high levels of Pb (18-3160 mg/kg), Zn (66-10500 mg/kg), and As (10-4620 mg/kg). . The cleaning methods were not always efficient in removing the metal(loid)s and sulfur. In some cases, the cleaned mine waste samples even contained higher total metal(loid) and sulfur concentrations than the original mine waste samples. Based on the leaching studies, some alkali-activated materials, ceramics, and cement effectively immobilized certain metals (e.g., <0.5 mg/kg of Pb and <4 mg/kg of Zn). Also, longer curing times of the alkali-activated materials, in most cases, improved the immobilization of metal(loid)s. Additionally, for ceramics, the temperature at which the test pieces were fired (up to 1060 °C), also played a major role in decreasing the mobility of some metal(loid)s, while increasing others (e.g., As, potentially via the structural rearrangement of As and Fe). Overall, through this detailed characterization, the environmental impact from the mine waste to the downstream products was evaluated, determining which valorization methods are the most viable to close the circular economy loop.

Longitudinal assessment of the effect of alkali burns on corneal biomechanical properties using optical coherence elastography.

Eye injury due to alkali burn is a severe ocular trauma that can profoundly affect corneal structure and function, including its biomechanical properties. Here, we assess the changes in the mechanical behavior of mouse corneas in response to alkali-induced injury by conducting longitudinal measurements using optical coherence elastography (OCE). A non-contact air-coupled ultrasound transducer was used to induce elastic waves in control and alkali-injured mouse corneas in vivo, which were imaged with phase-sensitive optical coherence tomography. Corneal mechanical properties were estimated using a modified Rayleigh-Lamb wave model, and results show that Young's modulus of alkali-burned corneas were significantly greater than that of their healthy counterparts on days 7 (p = 0.029) and 14 (p = 0.026) after injury. These findings, together with the changes in the shear viscosity coefficient postburn, indicate that the mechanical properties of the alkali-burned cornea are significantly modulated during the wound healing process.

Leaching assessment of cemented bauxite tailings through wetting and drying cycles of durability test.

Disposal of mine tailings can cause negative environmental effects by releasing contaminants to surface and underground water. Alkali activation is a promising technique for immobilizing metals in stabilization/solidification of these wastes. This study evaluates the leaching behavior of cemented bauxite tailings (BT) submitted to weathering conditions. The alkali-activated binder was composed of sugar cane bagasse ash, carbide lime, and sodium hydroxide solution. Comparisons of the durability and leaching behavior of BT stabilized with alkali-activated binder and high initial strength Portland cement were performed. The durability results for alkali-activated were similar to the Portland cement, showing an average difference of 16%. Portland cement showed favorable results in the encapsulation of heavy metals like Cd and Hg, while the alkali-activated cement on Al, Cr, and Se. For Ba, Fe, Mn, and Zn immobilization, both types of cement presented an equal performance. The durability and leaching behavior of stabilized bauxite tailings is governed by the cement content and porosity of the blends, as well as their pH.

Assessment of corn stover pretreated with shock and alkali using methane-arrested anaerobic digestion.

Corn stover, an underutilized agricultural residue, is a promising lignocellulosic feedstock for producing biofuels. To fully utilize it, pretreatment is needed. Typically, pretreatments are rapidly assessed using extracellular enzymes that release sugars from cellulose and hemicellulose. In contrast, this study uses methane-arrested anaerobic digestion (MAAD) to assess pretreatments. Although time consuming, MAAD is a more accurate assessment technique when lignocellulose is employed in the carboxylate platform, a promising approach that utilizes nearly all biomass components. Using recommended pretreatment conditions identified from a previous study, three corn stover pretreatments were compared using MAAD: (1) shock-only, (2) NaOH-only, and (3) shock + NaOH. Air-dried sewage sludge was used as nutrient source. At 100 g/L initial substrate concentration, compared to untreated corn stover, shock-only decreased conversion (amount of biomass digested) by 14%, NaOH-only increased conversion by 82%, and shock + NaOH increased conversion by 104%. Using batch MAAD data, the continuum particle distribution model simulated four-stage countercurrent fermentation. At an industrial non-acid volatile solids (NAVS) concentration of 300 g/Lliq , for both NaOH-only and shock + NaOH, the model predicts total carboxylic acid concentration of about 58 g/L and conversion of about 0.85 g NAVSdigested /g NAVSfed at liquid retention time of 35 days and volatile solid loading rate of 4 g/(Lliq ⋅day). At this long solid residence time, shock is not necessary; however, with short solid residence times, shock acts synergistically to aid NaOH pretreatment. Shock treatment offers a way to reduce pretreatment costs without sacrificing pretreatment efficacy.

Cost-Effective Fabrication of Micro-Nanostructured Superhydrophobic Polyethylene/Graphene Foam with Self-Floating, Optical Trapping, Acid-/Alkali Resistance for Efficient Photothermal Deicing and Interfacial Evaporation.

Solar evaporation is one of the most attractive and sustainable approaches to address worldwide freshwater scarcity. Unfortunately, it is still a crucial challenge that needs to be confronted when the solar evaporator faces harsh application environments. Herein, a promising polymer molding method that combines melt blending and compression molding, namely micro extrusion compression molding, is proposed for the cost-effective fabrication of lightweight polyethylene/graphene nanosheets (PE/GNs) foam with interconnected vapor escape channels and surface micro-nanostructures. A contact angle of 155 ± 2°, a rolling angle of 5 ± 1° and reflectance of ≈1.6% in the wavelength range of 300-2500 nm appears on the micro-nanostructured PE/GNs foam surface. More interestingly, the micro-nanostructured PE/GNs foam surface can maintain a robust superhydrophobic state under dynamic impacting, high temperature and acid-/alkali solutions. These results mean that the micro-nanostructured PE/GNs foam surface possesses self-cleaning, anti-icing and photothermal deicing properties at the same time. Importantly, the foam exhibits an evaporation rate of 1.83 kg m-2 h-1 under 1 Sun illumination and excellent salt rejecting performance when it is used as a self-floating solar evaporator. The proposed method provides an ideal and industrialized approach for the mass production of solar evaporators suitable for practical application environments.

Assessment of shock pretreatment and alkali pretreatment on corn stover using enzymatic hydrolysis.

This study investigates digestibility enhancements of lignocellulose from shock pretreatment, alkaline pretreatment, and combination. Shock pretreatment subjects aqueous slurries of lignocellulose to shock waves, which disrupts its structure rendering it more susceptible to hydrolysis. Alkaline pretreatment submerges the biomass in aqueous alkali (NaOH, Ca(OH)2 ), which removes lignin and acetyl groups. As indicators of digestibility, cellulase (CTec3) and hemicellulase (HTec3) were used to saccharify the pretreated corn stover and the resulting filtrate which contains about 10% of the sugars. Shock is most effective when it precedes alkaline pretreatment, presumably because it opens the biomass structure and enhances diffusion of pretreatment chemicals. Lignocellulose digestibility from calcium hydroxide treatment improves significantly with oxygen addition. In contrast, sodium hydroxide is a more potent alkali, and thereby eliminates the need for oxygen to enhance pretreatment. At low hydroxide loadings (<4 g OH- /100 g dry biomass), both NaOH and Ca(OH)2 provide similar increases in digestibility; however, at high hydroxide loadings, NaOH is superior. For animal feed, Ca(OH)2 treatment is recommended, because residual calcium ions are valuable nutrients. In contrast, for methane-arrested anaerobic digestion, NaOH treatment is preferred because NaHCO3 is a stronger buffer. At 50°C, shock pretreatment improves sugar yields at all NaOH loadings. The effect of shock is most pronounced when the no-shock control employed the same soaking-and-drying procedure as the shock treatment. The recommended conditions are shock treatment (5.52 bar [abs] initial H2 /O2 pressure) followed by 50°C alkaline treatment with NaOH loading of 4 g OH- /100 g dry biomass for 1 h.

Environmental potential assessment of MSWI bottom ash-based alkali-activated binders.

Alkali-activated binders (AABs) stand out as a sustainable alternative to ordinary Portland cement (OPC) as they can be formulated using by-products or waste as raw materials. However, the presence of hazardous compounds in residues can lead to an increase in AABs' toxicity due to the highly alkaline media. Therefore, it is extremely important to evaluate their environmental risks to validate their use as building materials. This study environmentally assessed AABs prepared with two different fractions (0-30 mm and 8-30 mm) of weathered bottom ash (AA-WBA) from WtE plants. The potential leachate toxicity of AA-WBA was assessed using granular and monolithic leaching tests that simulated end-of-life and service life scenarios, respectively. Furthermore, an acute toxicity test with crustacean Daphnia magna as model organisms was conducted to determine the relationship between the leachate metal(loid) concentrations and the ecotoxicity of AA-WBA. The results showed higher metal(loid) concentrations in AA-WBA specimens prepared with the 0-30 mm fraction of WBA. The service life scenario revealed multiple metal(loid)-release mechanisms. The 48 h EC50 value (close to 10%; moderate toxicity) indicated that the use of the coarse fraction of WBA increased the immobilisation of the metal(loid)s. Finally, the correlation between the concentrations of some of the metal(loid)s and toxicity was demonstrated.

Life cycle assessment and cost analysis of fly ash-rice husk ash blended alkali-activated concrete.

The utilization of industrial and agricultural by-products for the production of alkali activated concrete (AAC) has the potential to yield significant benefits towards sustainability goals. To be a viable material, the construction industry requires a construction material that achieves the requisite strength and the other property requirements as specified in codes and standards while demonstrating improved sustainability criteria. Fly ash and Rice Husk Ash (RHA) are abundantly available waste products, principally located in Asian countries. Currently, a significant proportion of these materials are disposed of in landfills, lagoons and rivers but offer potential to utilize in AAC. Hence, the identification of variables associated with fly ash and fly ah-RHA blended AAC by utilizing fly ash and RHA is vital. This study quantifies the environmental and economic factors by assessing the Greenhouse gas (GHG) emission, environmental impacts and benefits, and cost analysis of utilizing fly ash and RHA in AAC compared to Portland Cement (PC) concrete. Alkaline activator is a key component responsible for the highest GHG emission, cost and environmental impact amounts obtained for fly ash geopolymer and blended alkali-activated concrete compared with PC concrete. Alkali activators contribute to 74% of the total GHG emission, while heat curing contributed only 9% to the total GHG emission. The addition of 10% RHA to alkali-activated concrete showed a slight benefit for the analysis. Utilization of waste fly ash and RHA is responsible for providing significant benefits in terms of fresh and marine water ecotoxicity by avoiding waste disposal at the dumpsites, rivers, and storage lagoons.

Fractionation, characterization, and economic evaluation of alkali lignin from saw industry waste.

The present work was focused on the investigation of lignin isolation from saw industry biomass (sawdust (SD)) using alkali solution, and to perform economic analysis for 2000 kg/batch hypothetical plant using techno-economic analysis. The isolated lignin was fractionated using organic solvent to obtain purified lignin. FTIR and 1H NMR analysis were performed to examine the structural characteristics of lignin. Lignin nanoparticles (LN) showed higher total phenolic content (TPC) (244.1 ± 2 µg of GAE per mg) and antioxidant activity (63.2 ± 1.7%) compared with crude lignin (CL), ethanol fractionated lignin (EL), and acetone fractionated lignin (AL). SuperPro designer was exposed to design and simulated 2000 kg/batch of sawdust fractionation process. The techno-economic analysis estimated that the lignin production cost is about $ 487,000 per year, and the annual revenue could be $ 1,850,000 per year. The techno-economic analysis and sensitivity analysis could be useful for the industrial level sawdust fractionation process.

Longitudinal Assessment of Alkali Injury on Mouse Cornea Using Anterior Segment Optical Coherence Tomography.

Purpose: Chemical burns due to alkalis cause extensive damage to the ocular surface leading to blindness. Assessment of ocular burn could be challenging due to severe opacity, inflammation, and angiogenesis. Anterior segment optical coherence tomography (AS-OCT) and OCT angiography (OCTA) may provide fast, non-invasive deep tissue visualization of pathology with high sensitivity in conjunction with slit-lamp analysis. Methods: C57-BL/6J mice were anesthetized with ketamine/dexmedetomidine, and corneal alkali burn was induced (n = 6) by placing filter paper soaked in 1-M sodium hydroxide for 30 seconds on the right eye while the left eye was kept as control. Longitudinal imaging was done with AS-OCT/OCTA and fluorescein angiography at various time intervals for 14 days. Results: AS-OCT showed characteristic pathological changes in alkali-burned eyes with high sensitivity. Although OCT/OCTA showed three-dimensional and cross-sectional views of the anterior chamber and angiogenesis, fluorescein angiography showed nascent vessels with active leakage. Corneal swelling progressively increased by 125.26% on day 12 with a high prevalence of epithelial bullae, stromal cysts, stromal splitting, and Descemet's membrane detachment. Neovascularization was noted as early as day 4 in the burned eyes by both methods. Severe corneal opacity and anterior chamber inflammation were also detected by AS-OCT/OCTA. Conclusions: AS-OCT/OCTA is a promising, noninvasive, high-resolution imaging modality that can provide both qualitative and quantitative information regarding deep tissue pathology at a structural level. Translational Relevance: Noninvasive AS-OCT/OCTA and fluorescein methods show promise in clinical pathology evaluation for ocular injury management and prognostic indications, as the early presence of Descemet's membrane detachment and corneal swelling appears to be correlated with the severity and localization of corneal neovascularization.

Effect of a low-cost and highly efficient passivator synthesized by alkali-fused fly ash and swine manure on the leachability of heavy metals in a multi-metal contaminated soil.

Soil pollution, caused by heavy metals, is an environmental problem that requires an urgent solution in China. Chemical passivation is a technology that uses various passivators to reduce the availability of heavy metals in soil and realize the remediation of contaminated soil. In this study, we examined the effects of fly ash (FA), alkali-fused fly ash (AFFA), swine manure biochar (SB), and modifying biochar (MB) on the leachability of Cu, Zn, Pb, and Cd via soil culture experiments. The results showed that the addition of AFFA, SB, and MB significantly reduced the extractable contents of Cu, Pb, and Cd in the soil. AFFA and MB had the best passivation effect, followed by SB and FA. The passivation effect on Pb was the best, followed by that on Cu and Cd. AFFA modification significantly improved the passivation effect of MB on Cu, Pb, and Cd in composite contaminated soil. With the addition of 3% MB, the Pb, Cu, and Cd extracted by TCLP decreased by 95.7, 74.1, and 59.1%, respectively. Correlation analysis, Fourier transform infrared spectrometry, scanning electron microscopy, and energy-dispersive X-ray spectroscopy showed that the passivation mechanism is mainly due to an increase in the soil pH, silicate content, and cohesiveness. The soil culture experiments in this study proved that MB is a low-cost and highly efficient organic-inorganic composite passivator for multi-metal contaminated soils.

Industrial alkali lignin-derived biochar as highly efficient and low-cost adsorption material for Pb(II) from aquatic environment.

Developing a cost-effective and high-efficiency biochar is critical in various environmental applications. Lignin-based materials are natural and abundant adsorbents to heavy metals benefited from their special polyphenol structure and physicochemical properties. In this study, adsorption capacities to Pb(II) by alkali lignin (AL) and its biochar derivative (ALB) were comparatively discussed, and the latter exhibited superior adsorption performance, with a maximum adsorption capacity almost twice that of the former, and a much faster absorption rate. The qm value of ALB was significantly superior to that of other reported biochar materials. Pb(II) was mainly adsorbed into ALB in three forms: mineral precipitation, ion exchange, and surface complexation, with complexation and mineral precipitation being the dominant mechanisms of adsorption. This study demonstrates that alkali-lignin derived biochar is a promising material for the remediation of polluted by Pb(II).

Mindfulness e regulação emocional: uma revisão sistemática de literatura / Mindfulness and emotional regulation: a systematic literature review / Mindfulness y regulación emocional: una revisión sistemática de la literatura

OBJETIVO: este estudo de revisão sistemática de literatura buscou analisar as relações entre mindfulness e regulação emocional. MÉTODO: foram consultadas diversas bases de dado nacionais e internacionais e selecionou-se para análise 60 artigos publicados no período de 2009 a 2019. RESULTADOS: Em termos conceituais, mindfulness é prevalentemente considerado como um traço, e menos como um estado ou habilidade. Os resultados dos estudos empíricos sugerem que mindfulness mostra-se associado ao uso de estratégias de regulação emocional adaptativas favorecendo o funcionamento psíquico saudável. Apontam-se também os limites e contribuições desta revisão. CONCLUSÃO: Há a necessidade de mais estudos que considerem o aspecto processual de mindfulness e que possibilitem capturar a vivência subjetiva da prática, tendo em visto a prevalência de estudos quantitativos que fizeram uso de escalas de autorrelato.

OBJECTIVE: This systematic literature review study sought to analyze the relationship between mindfulness and emotional regulation. METHOD: Several national and international databases were consulted and 60 articles published in the period from 2009 to 2019 were selected for analysis. RESULTS: In conceptual terms, mindfulness is predominantly considered as a trait, and less as a state or skill. The results of empirical studies suggest that mindfulness is associated with the use of adaptive emotional regulation strategies favoring healthy psychic functioning. The limits and contributions of this review are also pointed out. CONCLUSION: It is concluded that there is a need for further studies that consider the procedural aspect of mindfulness and that make it possible to capture the subjective experience of the practice, considering the prevalence of quantitative studies that used self-report scales.

OBJETIVO: este estudio de revisión sistemática de la literatura buscó analizar la relación entre la atención plena y la regulación emocional. MÉTODO: se consultaron varias bases de datos nacionales e internacionales y se seleccionaron para su análisis 60 artículos publicados en el período de 2009 a 2019. RESULTADOS: en términos conceptuales, la atención plena se considera predominantemente como un rasgo, y menos como un estado o habilidad. Los resultados de los estudios empíricos sugieren que la atención plena se asocia con el uso de estrategias adaptativas de regulación emocional que favorecen el funcionamiento psíquico saludable. También se señalan los límites y las contribuciones de esta revisión. CONCLUSIÓN: se concluye que es necesario realizar más estudios que consideren el aspecto procesal de la atención plena y que permitan capturar la experiencia subjetiva de la práctica, considerando la prevalencia de estudios cuantitativos que utilizaron escalas de autoinforme.