Karanjin-loaded soya lecithin-based ethosomal nanogel for the therapeutic intervention of psoriasis: formulation development, factorial design based-optimization,in vitroandin vivoassessment.

This study aimed to develop and optimize karanjin-loaded ethosomal nanogel formulation and evaluate its efficacy in alleviating symptoms of psoriasis in an animal model induced by imiquimod. These karanjin-loaded ethosomal nanogel, were formulated to enhance drug penetration into the skin and its epidermal retention. Karanjin was taken to formulate ethosomes due to its potential ani-psoriatic activity. Ethosomes were formulated using the cold method using 32full factorial designs to optimize the formulation components. 9 batches were prepared using two independent variablesX1: concentration of ethanol andX2: concentration of phospholipid whereas vesicle size (Y1) and percentage entrapment efficiency (Y2) were selected as dependent variables. All the dependent variables were found to be statistically significant. The optimized ethosomal suspension (B3) exhibited a vesicle size of 334 ± 2.89 nm with an entrapment efficiency of 94.88 ± 1.24% and showed good stability. The morphology of vesicles appeared spherical with smooth surfaces through transmission electron microscopy analysis. X-ray diffraction analysis confirmed that the drug existed in an amorphous state within the ethosomal formulation. The optimized ethosome was incorporated into carbopol 934 to develop nanogel for easy application on the skin. The nanogel underwent characterization for various parameters including spreadability, viscosity, pH, extrudability, and percentage drug content. The ethosomal formulation remarkably enhanced the skin permeation of karanjin and increased epidermal retention of the drug in psoriatic skin compared to marketed preparation and pure drug. A skin retention study showed that ethosomal nanogel formulation has 48.33% epidermal retention in 6 h.In vivo,the anti-psoriatic activity of karanjin ethosomal nanogel demonstrated significant improvement in psoriasis, indicated by a gradual decrease in skin thickness and scaling as reflected in the Psoriasis Severity Index grading. Therefore, the prepared ethosomal nanogel is a potential vehicle for improved topical delivery of karanjin for better treatment of psoriasis.

Synergistic approach for enhanced production of polyhydroxybutyrate by Bacillus pseudomycoides SAS-B1: Effective utilization of glycerol and acrylic acid through fed-batch fermentation and its environmental impact assessment.

The continual rise in the consumption of petroleum-based synthetic polymers raised a significant environmental concern. Bacillus pseudomycoides SAS-B1 is a gram-positive rod-shaped halophilic bacterium capable of accumulating Polyhydroxybutyrate (PHB)-an intracellular biodegradable polymer. In the present study, the optimal conditions for cell cultivation in the seed media were developed. The optimal factors included a preservation age of 14 to 21 days (with 105 to 106 cells/mL), inoculum size of 0.1 % (w/v), 1 % (w/v) glucose, and growth temperature of 30 °C. The cells were then cultivated in a two-stage fermentation process utilizing glycerol and Corn Steep Liquor (CSL) as carbon and nitrogen sources, respectively. PHB yield was effectively increased from 2.01 to 9.21 g/L through intermittent feeding of glycerol and CSL, along with acrylic acid. FTIR, TGA, DSC, and XRD characterization studies were employed to enumerate the recovered PHB and determine its physicochemical properties. Additionally, the study assessed the cradle-to-gate Life Cycle Assessment (LCA) of PHB production, considering net CO2 generation and covering all major environmental impact categories. The production of 1000 kg of PHB resulted in lower stratospheric ozone depletion and comparatively reduced carbon dioxide emissions (2022.7 kg CO2 eq.) and terrestrial ecotoxicity (9.54 kg 1,4-DCB eq.) than typical petrochemical polymers.

Octocrylene: From Sunscreens to the Degradation Pathway during Chlorination Processes: Formation of Byproducts and Their Ecotoxicity Assessment.

Octocrylene is an organic sunscreen whose main action is to absorb UVB radiation and short UVA wavelengths; it is used in various cosmetic products in order to provide an adequate sun-protection factor or to protect the cosmetic formulations themselves from UV radiation. This filter is believed to be a possible endocrine disruptor and is also questioned due to its allergic and/or photoallergic potential. However, it continues to be widely used, and it has been found in various environments, not least those of swimming pools, where it is evidently released by consumers, to the point that it is now considered an emerging micropollutant. The present investigation presents the possible chemical fate of octocrylene in the typical chlorination conditions of wastewater or swimming pools. A total of 11 disinfection byproducts were identified, and 6 were identified for the first time, and separated by HPLC. These products were identified through careful mass spectrometry studies and 1D and 2D NMR experiments. A formation mechanism has been proposed that justifies the chemical structures of all of the compounds identified. The ecotoxicological assessment of octocrylene and their products was carried out by employing Phaeodactylum tricornutum, Brachionus plicatilis and Aliivibrio fischeri as bioindicators. The ecotoxicity results reveal that toxic byproducts might be generated during the oxidation process, increasing the potential risk to the marine environment.

Acute and chronic health risk assessment for inhalation and ingestion exposure in acrylic acid leak accidents.

We established a hypothetical acrylic acid leak accident scenario, conducted a health risk assessment of local residents, and compared an actual accident case to the hypothetical scenario. The exposed subjects were divided into four age groups, and a noncarcinogenic health risk assessment was conducted for inhalation and soil ingestion. In the hypothetical scenario, 40 tons of acrylic acid was leaked in Ulsan for 1 h from midnight on January 1, 2017. In the actual accident case, 3 L of acrylic acid was leaked in Hwaseong, Gyeonggi Province, for 1 h from 11:00 am on March 5, 2020. The environmental concentration of acrylic acid was calculated using the dynamic multimedia environmental model. Noncarcinogenic assessment of the hypothetical scenario showed the hazard quotient exceeded 1 across all age groups, suggesting that a health risk is likely to occur due to inhalation exposure to acrylic acid resulting from a chemical accident. In addition, Hazardacute exceeded 1 until 2 h after the accident under the hypothetical scenario, indicating the likelihood of a health risk. Thus, we propose a methodology that can assess changing concentrations in a hazardous chemical leak from a chemical accident based on the time, place, the chemical's behaviors in different environmental media, and the health risk posed by the exposure of the chemical to local residents in the area affected by the accident.

Resistance assessment of pyraoxystrobin in Magnaporthe oryzae and the detection of a point mutation in cyt b that confers resistance.

Pyraoxystrobin is a new QoI fungicide developed in China. The present study was aimed at determining the baseline sensitivity of M. oryzae to pyraoxystrobin and investigating the potential resistance risk and resistance mechanism of pyraoxystrobin in M. oryzae. The results showed that the mean EC50 of 109 M. oryzae isolates to pyraoxystrobin was 0.0094 µg/mL and the sensitivity exhibited a unimodal distribution. The established baseline sensitivity could provide critical data for monitoring sensitivity changes of M. oryzae to pyraoxystrobin in rice fields. The potential resistance risk was assessed by investigating the biological characteristics of the resistant mutants obtained by fungicide adaptation. The results indicated that the resistance risk of pyraoxystrobin in M. oryzae was medium to high with positive cross-resistance between pyraoxystrobin and azoxystrobin, but without cross resistance between pyraoxystrobin and carbendazim, isoprothiolane, and prochloraz. Further investigation revealed that the pyraoxystrobin-resistant mutants had a G143S mutation in the cyt b protein. Molecular docking confirmed that the G143S substitution conferred high resistance to pyraoxystrobin in M. oryzae. Collectively, the results of this study provided essential data for monitoring the emergence of resistance and developing resistance management strategies for pyraoxystrobin.

Assessment of the performance of nonfouling polymer hydrogels utilizing citizen scientists.

To facilitate longer duration space travel, flight crew sickness and disease transmission amongst the crew must be eliminated. High contact surfaces within space vehicles provide an opportunity for bacterial adhesion, which can lead to biofilm formation or disease transmission. This study evaluates the performance of several nonfouling polymers using citizen science, to identify the best performing chemistry for future applications as bacteria resistant coatings. The specific polymer chemistries tested were zwitterionic sulfobetaine methacrylate (SBMA), and polyampholytes composed of [2-(acryloyloxy)ethyl] trimethylammonium chloride and 2-carboxyethyl acrylate (TMA/CAA), or TMA and 3-sulfopropyl methacrylate (TMA/SA). Each polymer chemistry is known to exhibit bacteria resistance, and this study provides a direct side-by-side comparison between the chemistries using a citizen science approach. Nearly 100 citizen scientists returned results comparing the performance of these polymers over repeat exposure to bacteria and 30 total days of growth. The results demonstrate that TMA/CAA polyampholyte hydrogels show the best long-term resistance to bacteria adhesion.

Nanocubosomal based in situ gel loaded with natamycin for ocular fungal diseases: development, optimization, in-vitro, and in-vivo assessment.

Natamycin (NT) is a synthetic broad-spectrum antifungal used in eye drops. However, it has low solubility and high molecular weight, limiting its permeation, and generally causes eye discomfort or irritation when administered. Therefore, the present study aimed to develop an ophthalmic in situ gel formulation with NT-loaded cubosomes to enhance ocular permeation, improve antifungal activity, and prolong the retention time within the eye. The NT-loaded cubosome (NT-Cub) formula was first optimized using an I-optimal design utilizing phytantriol, PolyMulse, and NT as the independent formulation factors and particle size, entrapment efficiency %, and inhibition zone as responses. Phytantriol was found to increase particle size and entrapment efficiency %. Higher levels of PolyMulse slightly increased the inhibition zone whereas a decrease in particle size and EE% was observed. Increasing the NT level initially increased the entrapment efficiency % and inhibition zone. The optimized NT-Cub formulation was converted into an in situ gel system using 1.5% Carbopol 934. The optimum formula showed a pH-sensitive increase in viscosity, favoring prolonged retention in the eye. The in vitro release of NT was found to be 71 ± 4% in simulated tear fluid. The optimum formulation enhanced the ex vivo permeation of NT by 3.3 times compared to a commercial formulation and 5.2 times compared to the NT suspension. The in vivo ocular irritation test proved that the optimum formulation is less irritating than a commercial formulation of NT. This further implies that the developed formulation produces less ocular irritation and can reduce the required frequency of administration.

Biomarker-based assessment of sublethal toxicity of organic UV filters (ensulizole and octocrylene) in a sentinel marine bivalve Mytilus edulis.

The global occurrence of organic UV filters in the marine environment is of increasing ecotoxicological concern. Here we assessed the toxicity of UV filters ensulizole and octocrylene in the blue mussels Mytilus edulis exposed to 10 or 100 µg l-1 of octocrylene and ensulizole for two weeks. An integrated battery of biochemical and molecular biomarkers related to xenobiotics metabolism and cellular toxicity (including oxidative stress, DNA damage, apoptosis, autophagy and inflammation) was used to assess the toxicity of these UV filters in the mussels. Octocrylene (but not ensulizole) accumulated in the mussel tissues during the waterborne exposures. Both studied UV filters induced sublethal toxic effects in M. edulis at the investigated concentrations. These effects involved induction of oxidative stress, genotoxicity (indicated by upregulation of DNA damage sensing and repair markers), upregulation of apoptosis and inflammation, and dysregulation of the xenobiotic biotransformation system. Octocrylene induced cellular stress in a concentration-dependent manner, whereas ensulizole appeared to be more toxic at the lower (10 µg l-1) studied concentration than at 100 µg l-1. The different concentration-dependence of sublethal effects and distinct toxicological profiles of ensulizole and octocrylene show that the environmental toxicity is not directly related to lipophilicity and bioaccumulation potential of these UV filters and demonstrate the importance of using bioassays for toxicity assessment of emerging pollutants in coastal marine ecosystems.

Curing of UV prints - Assessment of possible toxicological hazard for consumers.

In an experimental setting a laboratory analysis of substances migrating from UV prints under mechanical stress into sweat and saliva simulant was performed. The influence of paper type and curing degree on UV prints was investigated. Five substances were identified at concentrations above the limit of detection in the simulants PPG-3 glyceryl triacrylate, ethoxylated trimethylolpropane triacrylate, trimethylolpropane triacrylate, 2/4-isopropylthioxanthone (ITX), and 2,4-diethylthioxanthone (DETX). Migration of the acrylates and photoinitiators into saliva and sweat simulants were increased when the UV inks were printed on uncoated paper in comparison to coated paper. With an exposure scenario considering a person to leaf through 80 pages of UV-printed paper per day while touching each page with a licked fingertip, Risk Characterisation Ratios (RCR) for oral exposure well below 1 were obtained for all five substances indicating no risk for the general population. The three acrylates are classified for skin sensitisation. The migrated amounts per skin surface area of these three were compared with the EC3 value for a hypothetical substance that could be categorised as strong sensitiser (EC3 = 0.1%). The results show that the risk of skin sensitisation even under worst case conditions can be considered as negligible.

Acute toxic effect of typical chemicals and ecological risk assessment based on two marine microalgae, Phaeodactylum tricornutum and Platymonas subcordiformis.

With the increasing demand for typical hazardous and noxious substances (HNS) in chemical industry, there is an increased leakage risk of these HNS during transportation by vessel and storage nearby seashore. In this study, the acute toxicity of nonylphenol, butyl acrylate and 1, 2-dichloroethane to Phaeodactylum tricornutum (P. tricornutum) and Platymonas subcordiformis (P. subcordiformis), was investigated to assess their ecological risk. The results showed that the three kinds of HNS showed significant time- and dose-dependent patterns on the growth inhibition of two marine microalgae. The 96 h-EC50 of nonylphenol, butyl acrylate and 1, 2-dichloroethane on P. tricornutum was 1.088, 45.908 and 396 mg L-1, respectively, and the 96 h-EC50 of that on P. subcordiformis was 0.851, 52.621 and 389 mg L-1, respectively. It was a common method to evaluate the harm of pollutants to organisms by calculating HC5 value (the minimum pollutant concentration value harmful to 95 % of the studied species, which was no-effect concentration) with Species Sensitivity Distribution (SSD). On the basis of EC50, the ecological risk assessment was further carried out, and HC5 value of nonylphenol and 1, 2-dichloroethane to aquatic organism was 0.079 and 44 mg L-1, respectively.

In vitro haemocompatibility assessment of acrylic acid deposited on solid, polyurethane substrate.

The main purpose of the work was to assess the haemocompatible properties of polyurethane discs with a modified surface dedicated to cardiovascular system regeneration. They were coated with acrylic acid-based material to inhibit the activation of the blood coagulation cascade. This coating improved the wettability of the material, leading to the prevention of protein adsorption on the surface. The blood-material interaction was analyzed in dynamic conditions with a specially designed tester, which helps to control blood-material interaction under high shear stress conditions. The corresponding numerical model of the tester was also developed by finite volume method (FVM). The 3D FVM model allows the determination of shear stresses applying different flow and boundary conditions representing blood-material interactions. The haemocompatibility analyses were performed through in vitro tests using a blood flow simulator. They revealed a low probability of activation of blood coagulation and low leukocyte activation. The original mechanical set-up to test the blood-material interaction helped to prove that acrylic acid-based coatings expressed good haemocompatible properties.

Extraction With Sweat-Sebum Emulsion as a New Test Method for Leachables in Patch-Based Medical Devices, Illustrated by Assessment of Isobornylacrylate (IBOA) in Diabetes Products.

BACKGROUND: The increasing offering of patch-based medical devices is accompanied by growing numbers of reported adverse skin reactions. Procedures for testing leachables according to ISO 10993 may not be optimal for lipophilic substances that can be mobilized on skin by sweat and sebum. We propose an improved extraction method for targeted analysis of leachables using low volumes of a sweat-sebum emulsion. The approach is illustrated by the analysis of isobornylacrylate (IBOA), a compound found in some devices and suspected for allergenic potential. METHOD: Three patch-based products were tested: an implantable device for continuous glucose monitoring (CGM), an intermittently scanned CGM (isCGM) device, and a micro-insulin pump. Quantification of IBOA was performed by gas chromatography and allergenic potential of IBOA levels was assessed by the KeratinoSens cell assay. Different combinations were used for extraction solvent (isopropanol, 5% ethanol-water solution, and sweat-sebum emulsion), extraction volumes (complete immersion vs partial immersion in 2 mm of solvent), and extraction time (3, 5, and 14 days). RESULTS: Isobornylacrylate was only found in the isCGM device. About 20 mg/L IBOA were eluted after 3 days in isopropanol but only about 1 mg/L in ethanol-water. Sweat-sebum emulsion dissolves IBOA better and gives a more stable solution than ethanol-water. Decomposition of IBOA solutions requires adjusted extraction timing or correction of results. In the sweat-sebum extract, IBOA levels were about 20 mg/L after 3 days and about 30 mg/L after 5 days, clearly above the threshold found in the KerationSens assay for keratinocyte activation (10 mg/L). CONCLUSION: Extraction by low volumes of sweat-sebum emulsion can be a superior alternative for the targeted simulating-use assessment of leachables in patch-based medical devices.

Environmental risk assessment of polycarboxylate polymers used in cleaning products in the United States.

Polycarboxylate polymers have been common components of consumer and institutional cleaning products for decades. With interest heightened in the potential environmental impact of polymers, the American Cleaning Institute, the industry trade association of the cleaning products industry in the United States, is reassessing the state of the science regarding the environmental safety of polymers in cleaning products. In this case study, acrylic acid homopolymers and acrylic acid-maleic acid copolymers are evaluated using historical ecotoxicity data that have been reported over the past three decades. The evaluation includes an environmental exposure assessment that is based on recent information regarding the occurrence of those ingredients in cleaning products and market sales data for cleaning products sold in the United States. The ecotoxicity of polycarboxylate polymers is generally low. Consequently, the potential environmental risks associated with their use in cleaning products in the United States are low even when applying very conservative assumptions to the environmental exposure assessment. In addition, there are recent supporting conclusions from assessments by the governments of Australia and Canada that polycarboxylate polymers are polymers of low concern, and the U.S. Environmental Protection Agency has included a number of polycarboxylate polymers among the ingredients on its Safer Chemical Ingredients List based on their low hazard profile.

An Oxygen Delivery Polymer Enhances Seed Germination in a Martian-like Environment.

Critical to the success of establishing a sustainable human presence on Mars is the ability to economically grow crop plants. Several environmental factors make it difficult to fully rely on local resources for agriculture. These include nutrient sparse regolith, low and fluctuating temperatures, a high amount of ultraviolet radiation, and water trapped locally in the form of ice or metal oxides. While the 96% CO2 martian atmosphere is ideal to support photosynthesis, high CO2 concentrations inhibit germination. An added difficulty is the fact that a vast majority of crop plants require oxygen for germination. Here, we report the production of a polymer-based oxygen delivery system that supports the germination and growth of cress seeds (Lepidium sativum) in a martian regolith simulant under a martian atmosphere at 101 kPa. The oxygen-donating system is based on a low-density lightly cross-linked polyacrylate that is foamed and converted into a dry powder. It is lightweight, added in low amounts to regolith simulant, and efficiently donates enough oxygen throughout the volume of hydrated regolith simulant to fully support seed germination and plant growth. Germination rates, plant development, and plant mass are nearly identical for L. sativum grown in 100% CO2 in the presence of the oxygen-donating lightly cross-linked polyacrylate compared with plants grown in air. The polymer system also serves to protect root structures and better anchors plants in the regolith simulant.

Assessment of the Antithrombogenicity of a Poly-2-Methoxyethylacrylate-Coated Central Venous Port-Catheter System.

PURPOSE: The purpose of this study was to evaluate the antithrombogenic effects of poly-2-methoxyethylacrylate (PMEA) coating applied to the internal surfaces of the port-catheter system to prevent thrombotic occlusion. MATERIALS AND METHODS: PMEA coating was applied to the inner surfaces of the entire system, including the chamber, catheter, and connecting stem. PMEA-coated and uncoated port-catheter systems were each filled with fresh human blood for 1 or 3 h and then flushed with saline. Volumes of residual thrombi in the system and protein in the catheter were then compared. RESULTS: Saline flushing of the PMEA-coated port-catheter system expelled all visually recognizable thrombi, leaving no unremovable adhesions. In contrast, the uncoated port showed thrombi adherent to the inner surfaces and incomplete expulsion with flushing. Mean (± standard deviation) residual thrombus mass was significantly lower in PMEA-coated port-catheter systems (20.5 ± 6.2 mg) than in uncoated systems (230.3 ± 92.5 mg; p < 0.01). Mean residual protein was likewise significantly lower in PMEA-coated systems (20.5 ± 6.2 mg) than in uncoated systems (230.3 ± 92.5 mg; p < 0.01). CONCLUSIONS: PMEA coating on a central venous port-catheter system decreased accumulation and facilitated flushing of thrombi from the system by flushing, as compared with the uncoated system. PMEA-coated central venous port-catheter systems appear relatively antithrombotic compared to uncoated systems.

Fabrication of a novel low-cost superoleophilic nonanyl chitosan-poly (butyl acrylate) grafted copolymer for the adsorptive removal of crude oil spills.

A novel superoleophilic-hydrophobic nonanyl chitosan-poly (butyl acrylate) grafted copolymer was fabricated as a low-cost oil-adsorbent. Chitosan (CS) was coupled with a hydrophobic nonanal (N) to form nonanyl chitosan (NCS) schiff base, and followed by grafting with butyl acrylate monomers (ButA). The grafted copolymer was characterized by FTIR, TGA and SEM tools. The grafting percent was augmented and reached 88.5% with increasing ButA concentration up to 156 mM. Moreover, measurements of contact angle proved the superoleophilic character of NCS-g-poly (ButA) copolymer with an oil-contact angle 31°. Factors affecting the removal process such as contact time, oil type, oil dose, adsorbent dose, temperature and agitation speed were optimized. An increment in the oil removal (%) was observed with increasing the oil viscosity in the order of gasoil < mobil-1 oil < light crude oil < heavy crude oil. Besides, the adsorption process followed the pseudo-second order model and the equilibrium data were sufficiently fitted with the Langmuir model with a maximum adsorption capacity 108.79 g/g at 25 °C. Thermodynamic parameters computed from Van't Hoff plot confirmed the process to be exothermic, favorable and spontaneous. The results nominate the superoleophilic adsorbent as a potential oil- adsorbent for petroleum oil spills removal.

Bioconjugation as a smart immobilization approach for α-amylase enzyme using stimuli-responsive Eudragit-L100 polymer: a robust biocatalyst for applications in pharmaceutical industry.

Enzymes are powerful versatile biocatalysts, however, industrial application of enzymes is usually hampered by their susceptibility. Bio-inspired Eudragit-α-amylase conjugate (E-AC) was proposed as a biocatalyst for various pharmaceutical and industrial applications. In this study, α -Amylase (E.C. 3.2.1.1) was immobilized by covalent conjugation to Eudragit L-100 under mild conditions. The effect of polymer, carbodiimide and enzyme concentrations on optimization of (E-AC) was investigated. In addition, characterization of the free α -Amylase and E-AC with regard to pH, temperature, kinetic parameters, reusability and operational and storage conditions was carried out. Results showed a shift of the optimum pH of E-AC towards the alkaline side whereas, E-AC exhibited higher thermal stability at all tested temperatures. The kinetic parameters, Km values were 2.87 mg/ml and 3.15 mg/ml and Vmax values were 8.35 mg/ml/min and 8.98 mg/ml/min for free and E-AC, respectively. E-AC retained 85% of the initial activity after five consecutive amylolytic cycles, thus emphasizing its powerful potentials. Operational storage and thermal stability were highly improved as well for E-AC conjugate with an 11.6 stabilization factor in comparison to the free α-amylase. In this study, Eudragit L-100 polymer was successfully used as smart immobilization support to create a reversibly soluble-insoluble enzyme biocatalyst to enforce and extend biotechnological applications of α-amylase in the pharmaceutical industry.

Risk assessment and QbD based optimization of an Eprosartan mesylate nanosuspension: In-vitro characterization, PAMPA and in-vivo assessment.

Quality by design (QbD) principles were implemented to understand the product and process variables of sonoprecipitation technique, for preparation of eprosartan mesylate (EM) nanosuspension. Quality risk management approach was utilized to identify and assess high-risk attributes affecting critical quality attributes (CQA's), prioritizing the number of experiments. The effect of critical material attributes (CMA's) and critical process parameters (CPP's) (soluplus concentration, drug concentration ultrasonication amplitude) on z-average particle size and PDI were investigated using a central composite face-centered design (CCF). Further, design space with criteria set of CMA's and CPP's was established to offer assurance of quality. The optimal formulation, identified using numerical optimization method, was further lyophilized and evaluated for redispersibility, solubility saturation, dissolution kinetic and in-vitro dissolution behavior. The EM nanoparticles were in an amorphous state as confirmed by differential scanning calorimetry (DSC) and X-ray diffraction (XRD) studies. The stability study conducted for a span of 6 months attests physical and chemical stability of EM dry nanosuspension in an amorphous state when stored at 4 °C. The enhanced solubility and in-vitro dissolution of EM nanosuspension may be attributed to the reduced particle size and alteration of the physical state from a crystalline to an amorphous state. Further, the optimized formulation was subjected to in-vitro and ex-vivo transport study using parallel artificial membrane permeability assay (PAMPA) and rat everted gut sac model respectively. The transport studies revealed successful permeation enhancement of EM nanoparticle when compared with EM API and physical mixture (PM). The absolute bioavailability of EM API was 7.1% and improved to 39.9% for EM nanosuspension, suggesting that nanoformulation had overcome solubility and permeability limited bioavailability which was observed with EM API.

Concentration dependence of in vitro biotransformation rates of hydrophobic organic sunscreen agents in rainbow trout S9 fractions: Implications for bioaccumulation assessment.

In vitro biotransformation studies were performed to support the bioaccumulation assessment of 3 hydrophobic organic ultraviolet filters (UVFs), 4-methylbenzylidene camphor (4-MBC), 2-ethylhexyl-4-methoxycinnamate (EHMC), and octocrylene. In vitro depletion rate constants (kdep ) were determined for each UVF using rainbow trout liver S9 fractions. Incubations performed with and without added cofactors showed complete (4-MBC) or partial (EHMC and octocrylene) dependence of kdep on addition of the reduced form of nicotinamide adenine dinucleotide phosphate (NADPH), suggesting that hydrolysis of EHMC and octocrylene by NADPH-independent enzymes (e.g., carboxylesterases) is an important metabolic route. The concentration dependence of kdep was then evaluated to estimate Michaelis-Menten parameters (KM and Vmax ) for each UVF. Measured kdep values were then extrapolated to apparent whole-body biotransformation rate constants using an in vitro-in vivo extrapolation (IVIVE) model. Bioconcentration factors (BCFs) calculated from kdep values measured at concentrations well below KM were closer to empirical BCFs than those calculated from kdep measured at higher test concentrations. Modeled BCFs were sensitive to in vitro binding assumptions employed in the IVIVE model, highlighting the need for further characterization of chemical binding effects on hepatic clearance. The results suggest that the tested UVFs are unlikely to accumulate to levels exceeding the European Union Registration, Evaluation, Authorisation, and Restriction regulation criterion for bioaccumulative substances (BCF > 2000 L kg-1 ). However, consideration of appropriate in vitro test concentrations and binding correction factors are important when IVIVE methods are used to refine modeled BCFs. Environ Toxicol Chem 2019;38:548-560. © 2018 SETAC.

Antioxidant activity and photostability assessment of trans-resveratrol acrylate microspheres.

Trans-resveratrol (RSV) was microencapsulated in Eudragit® RS100 and RL100 resin blends. Lyophilized microspheres were characterized in the solid state for their micromeritic properties and drug loading. FT-IR, PXRD, and DSC analyzes suggested that RSV formed an intimate microcrystalline dispersion within the polymer network, also confirmed by SEM analysis. This produced a reduced degradation of RSV after storage at 40 °C, compared to the neat drug, and a protection of the drug from UV light-induced trans-cis isomerization (60% intact drug was found after 60 s irradiation at 350 nm, compared to 37% for the pure drug). Solubility and in vitro dissolution studies indicated that microencapsulation did not improve the dissolution pattern of RSV in simulated gastric and intestinal aqueous fluids. Evaluation of the in vitro antioxidant activity showed that, compared to the neat drug in aqueous solution, RSV loaded in the microspheres retained for a longer time, up to 22 days of incubation, the initial ORAC capacity. The present study thus demonstrated that Eudragit® Retard resins can be used to easily produce micro-sized solid dispersions with RSV, for potential oral administration, contributing to ameliorate the physico-chemical stability and antioxidant activity of this compound.