In vivo assessment of dual-function submicron textured nitric oxide releasing catheters in a 7-day rabbit model.

Catheter-induced thrombosis is a major contributor to infectious and mechanical complications of biomaterials that lead to device failure. Herein, a dualfunction submicron textured nitric oxide (NO)-releasing catheter was developed. The hemocompatibility and antithrombotic activity of vascular catheters were evaluated in both 20 h in vitro blood loop and 7 d in vivo rabbit model. Surface characterization assessments via atomic force microscopy show the durability of the submicron pattern after incorporation of NO donor S-nitroso-N-acetylpenicillamine (SNAP). The SNAP-doped catheters exhibited prolonged and controlled NO release mimicking the levels released by endothelium. Fabricated catheters showed cytocompatibility when evaluated against BJ human fibroblast cell lines. After 20h in vitro evaluation of catheters in a blood loop, textured-NO catheters exhibited a 13-times reduction in surface thrombus formation compared to the control catheters, which had 83% of the total area covered by clots. After the 7 d in vivo rabbit model, analysis on the catheter surface was examined via scanning electron microscopy, where significant reduction of platelet adhesion, fibrin mesh, and thrombi can be observed on the NO-releasing textured surfaces. Moreover, compared to relative controls, a 63% reduction in the degree of thrombus formation within the jugular vein was observed. Decreased levels of fibrotic tissue decomposition on the jugular vein and reduced platelet adhesion and thrombus formation on the texture of the NO-releasing catheter surface are indications of mitigated foreign body response. This study demonstrated a biocompatible and robust dual-functioning textured NO PU catheter in limiting fouling-induced complications for longer-term blood-contacting device applications. STATEMENT OF SIGNIFICANCE: Catheter-induced thrombosis is a major contributor to infectious and mechanical complications of biomaterials that lead to device failure. This study demonstrated a robust, biocompatible, dual-functioning textured nitric oxide (NO) polyurethane catheter in limiting fouling-induced complications for longer-term blood-contacting device applications. The fabricated catheters exhibited prolonged and controlled NO release that mimics endothelium levels. After the 7 d in vivo model, a significant reduction in platelet adhesion, fibrin mesh, and thrombi was observed on the NO-releasing textured catheters, along with decreased levels of fibrotic tissue decomposition on the jugular vein. Results illustrate that NO-textured catheter surface mitigates foreign body response.

In vitro assessment and phase I randomized clinical trial of anfibatide a snake venom derived anti-thrombotic agent targeting human platelet GPIbα.

The interaction of platelet GPIbα with von Willebrand factor (VWF) is essential to initiate platelet adhesion and thrombosis, particularly under high shear stress conditions. However, no drug targeting GPIbα has been developed for clinical practice. Here we characterized anfibatide, a GPIbα antagonist purified from snake (Deinagkistrodon acutus) venom, and evaluated its interaction with GPIbα by surface plasmon resonance and in silico modeling. We demonstrated that anfibatide interferds with both VWF and thrombin binding, inhibited ristocetin/botrocetin- and low-dose thrombin-induced human platelet aggregation, and decreased thrombus volume and stability in blood flowing over collagen. In a single-center, randomized, and open-label phase I clinical trial, anfibatide was administered intravenously to 94 healthy volunteers either as a single dose bolus, or a bolus followed by a constant rate infusion of anfibatide for 24 h. Anfibatide inhibited VWF-mediated platelet aggregation without significantly altering bleeding time or coagulation. The inhibitory effects disappeared within 8 h after drug withdrawal. No thrombocytopenia or anti-anfibatide antibodies were detected, and no serious adverse events or allergic reactions were observed during the studies. Therefore, anfibatide was well-tolerated among healthy subjects. Interestingly, anfibatide exhibited pharmacologic effects in vivo at concentrations thousand-fold lower than in vitro, a phenomenon which deserves further investigation.Trial registration: Clinicaltrials.gov NCT01588132.

Assessment of the effects of Syk and BTK inhibitors on GPVI-mediated platelet signaling and function.

Spleen tyrosine kinase (Syk) and Bruton's tyrosine kinase (BTK) play critical roles in platelet physiology, facilitating intracellular immunoreceptor tyrosine-based activation motif (ITAM)-mediated signaling downstream of platelet glycoprotein VI (GPVI) and GPIIb/IIIa receptors. Small molecule tyrosine kinase inhibitors (TKIs) targeting Syk and BTK have been developed as antineoplastic and anti-inflammatory therapeutics and have also gained interest as antiplatelet agents. Here, we investigate the effects of 12 different Syk and BTK inhibitors on GPVI-mediated platelet signaling and function. These inhibitors include four Syk inhibitors, Bay 61-3606, R406 (fostamatinib), entospletinib, TAK-659; four irreversible BTK inhibitors, ibrutinib, acalabrutinib, ONO-4059 (tirabrutinib), AVL-292 (spebrutinib); and four reversible BTK inhibitors, CG-806, BMS-935177, BMS-986195, and fenebrutinib. In vitro, TKIs targeting Syk or BTK reduced platelet adhesion to collagen, dense granule secretion, and alpha granule secretion in response to the GPVI agonist cross-linked collagen-related peptide (CRP-XL). Similarly, these TKIs reduced the percentage of activated integrin αIIbß3 on the platelet surface in response to CRP-XL, as determined by PAC-1 binding. Although all TKIs tested inhibited phospholipase C γ2 (PLCγ2) phosphorylation following GPVI-mediated activation, other downstream signaling events proximal to phosphoinositide 3-kinase (PI3K) and PKC were differentially affected. In addition, reversible BTK inhibitors had less pronounced effects on GPIIb/IIIa-mediated platelet spreading on fibrinogen and differentially altered the organization of PI3K around microtubules during platelets spreading on fibrinogen. Select TKIs also inhibited platelet aggregate formation on collagen under physiological flow conditions. Together, our results suggest that TKIs targeting Syk or BTK inhibit central platelet functional responses but may differentially affect protein activities and organization in critical systems downstream of Syk and BTK in platelets.

Impact of side-hole geometry on the performance of hemodialysis catheter tips: A computational fluid dynamics assessment.

Hemodialysis catheters are used to support blood filtration, yet there are multiple fundamentally different approaches to catheter tip design with no clear optimal solution. Side-holes have been shown to increase flow rates and decrease recirculation but have been associated with clotting/increased infection rates. This study investigates the impact of changing the shape, size and number of side-holes on a simple symmetric tip catheter by evaluating the velocity, shear stress and shear rate of inflowing blood. A platelet model is used to examine the residence time and shear history of inflowing platelets. The results show that side-holes improve the theoretical performance of the catheters, reducing the maximum velocity and shear stress occurring at the tip compared to non-side-hole catheters. Increasing the side-hole area improved performance up to a point, past which not all inflow through the hole was captured, and instead a small fraction slowly 'washed-out' through the remainder of the tip resulting in greater residence times and increasing the likelihood of platelet adhesion. An oval shaped hole presents a lower chance of external fibrin formation compared to a circular hole, although this would also be influenced by the catheter material surface topology which is dependent on the manufacturing process. Overall, whilst side-holes may be associated with increased clotting and infection, this can be reduced when side-hole geometry is correctly implemented though; a sufficient area for body diameter (minimising residence time) and utilising angle-cut, oval shaped holes (reducing shear stress and chances of fibrin formation partially occluding holes).

The key events of thrombus formation: platelet adhesion and aggregation.

Thrombus formation is a complex, dynamic and multistep process, involving biochemical reactions, mechanical stimulation, hemodynamics, and so on. In this study, we concentrate on its two crucial steps: (i) platelets adhered to a vessel wall, or simply platelet adhesion, and (ii) platelets clumping and arrested to the adherent platelets, named platelet aggregation. We report the first direct simulation of three modes of platelet adhesion, detachment, rolling adhesion and firm adhesion, as well as the formation, disintegration, arrestment and consolidation of platelet plugs. The results show that the bond dissociation in the detachment mode is mainly attributed to a high probability of rupturing bonds, such that any existing bond can be quickly ruptured and all bonds would be completely broken. In the rolling adhesion, however, it is mainly attributed to the strong traction from the shear flow or erythrocytes, causing that the bonds are ruptured at the trailing edge of the platelet. The erythrocytes play an important role in platelet activities, such as the formation, disintegration, arrestment and consolidation of platelet plugs. They exert an aggregate force on platelets, a repulsion at a near distance but an attraction at a far distance to the platelets. This aggregate force can promote platelets to form a plug and/or bring along a part of a platelet plug causing its disintegration. It also greatly influences the arrestment and consolidation of platelet plugs, together with the adhesive force from the thrombus.

The optimal incubation time for in vitro hemocompatibility testing: Assessment using polymer reference materials under pulsatile flow with physiological wall shear stress conditions.

During hemocompatibility testing, activation products may reach plateau values which can result in less distinction between hemocompatible and hemo-incompatible materials. Of concern is an underestimation of the blood activation caused by the biomaterial of interest, which may result in a false assessment of hemocompatibility. To elucidate the optimal incubation time for in vitro hemocompatibility testing, we used the Haemobile circulation model with human whole blood. Blood from healthy volunteers was in vitro incubated under pulsatile flow with physiological wall shear stress conditions at 37°C for 30, 60, 120, or 240 min. Test loops containing low-density polyethylene and polydimethylsiloxane served as low and high reference materials, that is, hemocompatible and hemo-incompatible biomaterials, respectively. In addition, empty loops served as a negative reference. Thrombogenicity, platelet function, inflammatory response, coagulation, and hemolysis between references and incubation times were compared. We found that thrombogenicity and platelet function were significantly affected by both the duration of incubation and the type of material. In particular, thrombogenicity and platelet function assessments were affected by incubation time. We found that an exposure time of 60 min was sufficient, and for almost all variables an optimal incubation time to discriminate between the low and high reference material. © 2019 The Authors. Journal of Biomedical Materials Research Part B: Applied Biomaterials published by Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 2335-2342, 2019.

Promoting Physical Activity and Exercise: JACC Health Promotion Series.

Physical inactivity is one of the leading modifiable risk factors for global mortality, with an estimated 20% to 30% increased risk of death compared with those who are physically active. The "behavior" of physical activity (PA) is multifactorial, including social, environmental, psychological, and genetic factors. Abundant scientific evidence has demonstrated that physically active people of all age groups and ethnicities have higher levels of cardiorespiratory fitness, health, and wellness, and a lower risk for developing several chronic medical illnesses, including cardiovascular disease, compared with those who are physically inactive. Although more intense and longer durations of PA correlate directly with improved outcomes, even small amounts of PA provide protective health benefits. In this state-of-the-art review, the authors focus on "healthy PA" with the emphasis on the pathophysiological effects of physical inactivity and PA on the cardiovascular system, mechanistic/triggering factors, the role of preventive actions through personal, education/environment, and societal/authoritative factors, as well as factors to provide guidance for caregivers of health promotion regarding PA. Sustainable and comprehensive programs to increase PA among all individuals need to be developed and implemented at local, regional, national, and international levels to effect positive changes and improve global health, especially the reduction of cardiovascular disease.

Biocompatibility assessment of cyclic olefin copolymers: Impact of two additives on cytotoxicity, oxidative stress, inflammatory reactions, and hemocompatibility.

This work reports the biocompatibility evaluation of cyclic olefin copolymers (COC) as candidates for implantable medical devices. The focus was to establish the influence of two major additives (antioxidant and lubricant) on the overall biocompatibility. The cytotoxicity was evaluated according to ISO 10993-5 guidelines using L929 fibroblasts, HUVEC, and THP-1-derived macrophages. Oxidative stress (ROS, GSH/GSSG, and SOD analysis) and pro-inflammatory cytokines (Il-6 and TNF-α secretion) were quantified using THP-1 cells in direct contact with films. Hemocompatibility was assessed through haemolysis testing, dynamic blood coagulation, platelet adhesion, and activation (membranous P-selectin expression). Results show that the different types of COC have successfully passed the in vitro biocompatibility tests. The presence of antioxidant induces however a slight decrease in ROS production in correlation with a high SOD activity and a modification in blood coagulation profile probably linked to antioxidant recrystallization phenomenon on the surface of COC. The lubricant presence reduced haemolysis, fibrinogen adhesion, and platelet activation. Surface nanotopography of COC highlights different types of needles and globules according to the present additive. Those primary results indicate that COC are promising biomaterial. However, additives influenced some biological parameters pointing out the necessity of a global approach of risk analysis for biocompatibility evaluation. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 3333-3349, 2017.

Biodegradability and platelets adhesion assessment of magnesium-based alloys using a microfluidic system.

Magnesium (Mg)-based stents are extensively explored to alleviate atherosclerosis due to their biodegradability and relative hemocompatibility. To ensure the quality, safety and cost-efficacy of bioresorbable scaffolds and full utilization of the material tunability afforded by alloying, it is critical to access degradability and thrombosis potential of Mg-based alloys using improved in vitro models that mimic as closely as possible the in vivo microenvironment. In this study, we investigated biodegradation and initial thrombogenic behavior of Mg-based alloys at the interface between Mg alloys' surface and simulated physiological environment using a microfluidic system. The degradation properties of Mg-based alloys WE43, AZ31, ZWEK-L, and ZWEK-C were evaluated in complete culture medium and their thrombosis potentials in platelet rich plasma, respectively. The results show that 1) physiological shear stress increased the corrosion rate and decreased platelets adhesion rate as compared to static immersion; 2) secondary phases and impurities in material composition induced galvanic corrosion, resulting in higher corrosion resistance and platelet adhesion rate; 3) Mg-based alloys with higher corrosion rate showed higher platelets adhesion rate. We conclude that a microfluidic-based in vitro system allows evaluation of biodegradation behaviors and platelets responses of Mg-based alloys under specific shear stress, and degradability is related to platelets adhesion.

Assessment of roles for the Rho-specific guanine nucleotide dissociation inhibitor Ly-GDI in platelet function: a spatial systems approach.

On activation at sites of vascular injury, platelets undergo morphological alterations essential to hemostasis via cytoskeletal reorganizations driven by the Rho GTPases Rac1, Cdc42, and RhoA. Here we investigate roles for Rho-specific guanine nucleotide dissociation inhibitor proteins (RhoGDIs) in platelet function. We find that platelets express two RhoGDI family members, RhoGDI and Ly-GDI. Whereas RhoGDI localizes throughout platelets in a granule-like manner, Ly-GDI shows an asymmetric, polarized localization that largely overlaps with Rac1 and Cdc42 as well as microtubules and protein kinase C (PKC) in platelets adherent to fibrinogen. Antibody interference and platelet spreading experiments suggest a specific role for Ly-GDI in platelet function. Intracellular signaling studies based on interactome and pathways analyses also support a regulatory role for Ly-GDI, which is phosphorylated at PKC substrate motifs in a PKC-dependent manner in response to the platelet collagen receptor glycoprotein (GP) VI-specific agonist collagen-related peptide. Additionally, PKC inhibition diffuses the polarized organization of Ly-GDI in spread platelets relative to its colocalization with Rac1 and Cdc42. Together, our results suggest a role for Ly-GDI in the localized regulation of Rho GTPases in platelets and hypothesize a link between the PKC and Rho GTPase signaling systems in platelet function.

A novel blood incubation system for the in-vitro assessment of interactions between platelets and biomaterial surfaces under dynamic flow conditions: The Hemocoater.

Hemocompatibility evaluation of biomaterials necessitates the use of blood incubation systems which simulate physiological flow conditions. However, most of the current systems have various limitations, especially restricted material variability, poor access to the test surface or damage of blood cells due to the use of a pump. In this paper, we combined the advantages of existent setups and developed a new planar shaped incubation test bench to lift those restrictions and mimic the pulsatile in-vivo situation. The adjustable flow conditions at the tested material surface were defined and corresponded to those in blood vessels. Platelet/material-interaction, as major aspect of hemocompatibility, was investigated for four common polymeric materials (polyoxymethylene, polypropylene, polyethylene and silicone elastomer) with platelet deprivation and platelet adhesion tests. Highly significant differences in the adhesion of platelets onto the tested material surfaces were measured. The number of adhered platelets on the most hydrophobic sample (silicone elastomer) was four-times higher than on the most hydrophilic sample (polyoxymethylene). These findings were confirmed with a scanning microscopic analysis and demonstrated the suitability of the testing device for the evaluation of platelet/material interactions. Moreover, hemolysis measurements demonstrated that the system did not provoke blood damage. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2430-2440, 2016.

Lack of effect of supplementation with EPA or DHA on platelet-monocyte aggregates and vascular function in healthy men.

BACKGROUND AND AIMS: Eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) found in fish oil are postulated to have favourable effects on platelet, endothelial and vascular function. We investigated whether EPA has differential effects on in vivo platelet aggregation and other markers of cardiovascular risk compared to DHA. METHODS AND RESULTS: Following a 2 wk run-in taking encapsulated refined olive oil, 48 healthy young men were randomly allocated using a parallel design to receive EPA-rich (3.1 g EPA/d) or DHA-rich (2.9 g DHA/d) triglyceride concentrates or refined olive oil (placebo), for a total supplementary lipid intake of 5 g/d. The specified primary outcome was change in platelet monocyte aggregates (PMA); secondary outcomes were capillary density, augmentation index, digital pulse volume measurements, 24 h ambulatory BP, plasma 8-isoprostanes-F2α. Changes in the proportions of DHA and EPA in erythrocytes and non-esterified fatty acid composition indicated compliance to the intervention. There was no significant treatment effect on PMA (P = 0.382); mean changes (%) (95% CI) were placebo -0.5 (-2.0, 1.04), EPA 0.4 (-0.8, 1.6), DHA 0.3 (-1.5, 2.0). R-QUICKI, an index of insulin sensitivity, was greater following EPA compared to placebo (P < 0.05). No other significant differences were noted. CONCLUSION: Neither EPA- nor DHA-rich fish oil supplementation influence platelet-monocyte aggregation or several markers of vascular function after 6 wk in healthy young males. This trial was registered at clinicaltrials.gov as NCT01735357.

Assessment of neonatal platelet adhesion, activation, and aggregation.

BACKGROUND: Acquired and inherited bleeding disorders may present in the neonatal period with devastating lifelong effects. Diagnosing bleeding disorders in the neonatal population could aid in preventing and treating the associated complications. However, currently available platelet function testing is limited in neonates, owing to difficulties in obtaining an adequate blood volume, a lack of normal reference ranges, and an incomplete understanding of the neonatal platelet functional phenotype. OBJECTIVE: To develop small-volume, whole blood platelet function assays in order to quantify and compare neonatal and adult platelet function. METHODS AND RESULTS: Peripheral blood was obtained from healthy, full-term neonates at 24 h of life. Platelet activation, secretion and aggregation were measured via flow cytometry. Platelet adhesion and aggregation were assessed under static and flow conditions. As compared with adult platelets, peripheral neonatal platelet P-selectin expression and integrin glycoprotein IIbIIIa activation were significantly reduced in response to the G-protein-coupled receptor (GPCR) agonists thrombin receptor activator peptide-6 (TRAP-6), ADP, and U46619, and the immunoreceptor tyrosine-based activation motif (ITAM) signaling pathway agonists collagen-related peptide (CRP) and rhodocytin. Neonatal platelet aggregation was markedly reduced in response to TRAP-6, ADP, U46619, CRP and rhodocytin as compared with adult platelets. The extents of neonatal and adult platelet adhesion and aggregate formation under static and shear conditions on collagen and von Willebrand factor were similar. CONCLUSIONS: As compared with adult platelets, we found that neonatal platelet activation and secretion were blunted in response to GPCR or ITAM agonists, whereas the extent of neonatal platelet adhesion and aggregate formation was similar to that of adult platelets.

Sonorheometry assessment of platelet function in cardiopulmonary bypass patients: Correlation of blood clot stiffness with platelet integrin αIIbß3 activity, aspirin usage, and transfusion risk.

BACKGROUND: Impaired platelet function may underlie bleeding associated with cardiopulmonary bypass (CPB) and at present is incompletely evaluated with existing diagnostic technologies. Sonorheometry (SR) is a recently developed ultrasound-based technology that quantifies hemostasis and platelet activity from a blood sample by measuring ex vivo clot stiffness (S). We hypothesized that impaired platelet-fibrin interactions as assessed by SR would correlate with transfusion during CPB and history of prior aspirin therapy. METHODS: Thirty-nine patients undergoing elective cardiopulmonary bypass (CPB) were enrolled following informed consent (University of Virginia IRB#14050) in a prospective observational pilot study to assess pre-operative platelet function and transfusion frequency. To assess platelet activity, abciximab was added to blood prior to SR and native S versus abciximab treated S created a differential test for platelet activity. Patient blood samples were activated with kaolin and SR was then used to measure clot stiffness. Patients were transfused with blood products as directed by clinical practice, with the surgical team blinded to SR results. RESULTS: Blood clot stiffness with and without abciximab, was compared in a ratio test (S/Sabciximab) named the Platelet Function Index (PFI). PFI was hypothesized to be positively correlated with platelet contributions through integrin αIIbß3 to clot stiffness. PFI for CPB subjects was lower for those receiving transfusions than those not receiving transfusions (p<0.006). A receiver-operator characteristics (ROC) analysis correlating the PFI with the blinded surgical team's decision on transfusions that included platelet concentrates generated an area under the curve (AUC) of 0.79 (p<0.001). Additionally, the mean value of PFI for subjects on aspirin therapy was lower than for those not on aspirin therapy (p<0.02) and correlated with a 1.73-fold enhanced risk of receiving a peri-operative transfusion. CONCLUSION: Evaluation of platelet function with SR may help in the specification of blood transfusion needs in cardiac surgery and in the assessment of aspirin effects on risk of surgical bleeding.

Next generation covered stents made from nanocomposite materials: A complete assessment of uniformity, integrity and biomechanical properties.

Covered stents are stents wrapped with a thin polymeric membrane, and are typically used to treat vessel aneurysms and seal perforated arteries. Current covered stents suffer from restenosis due to limitations in material and fabrication methods which leaves metallic struts directly exposed to blood. We have developed a biocompatible and haemocompatible nanocomposite polymer, polyhedral oligomeric silsesquioxane poly(carbonate-urea) urethane (POSS-PCU). We devised a novel combination of ultrasonic spray atomisation system and dip-coating process to produce small calibre covered stents with metal struts fully embedded within the membrane, which also yields greater coating uniformity. Stent-polymer bonding was enhanced via silanisation and coating of reactive pre-polymer. Platelet studies supported the non-thrombogenicity of POSS-PCU. Biomechanical performances including diametrical compliance, bending strength, radial strength and recoil were evaluated and optimised. This proof-of-principle manufacturing technique could lead to the development of next-generation small calibre adult and paediatric covered stents. These stents are currently undergoing preclinical trial. From the Clinical Editor: The use of stents to treat vascular diseases is now the standard of care in the clinical setting. Nonetheless, a major problem of the current stents is the risk of restenosis and thrombosis. The authors developed a nanocomposite material using polyhedral oligomeric silsesquioxane and poly(carbonate-urea) urethane (POSS-PCU) and incorporated into metallic stents. Preliminary data have already shown promising results. It is envisaged that this would further lead to better stent technology in the future.

Quantification of adherent platelets on polymer-based biomaterials. Comparison of colorimetric and microscopic assessment.

BACKGROUND: Platelet adhesion to artificial surfaces is one of the most important indicators for the thrombogenicity of implant materials. Currently, a variety of enzyme activity-based colorimetric assays or microscopy-based techniques are commonly in use to assess this characteristic. Studies about how data of colorimetric assays correlate with the image-based quantification of adherent platelets are scarce. To address this question, the present study compared two colorimetric assays (lactate dehydrogenase (LDH) and acid phosphatase (ACP)) with an image-based quantification of the density of platelets adhering on polymer-based biomaterial surfaces. MATERIALS AND METHODS: Tri-sodium citrated whole blood was collected from apparently healthy subjects and platelet rich plasma (PRP) was prepared according to a standardized protocol. An in vitro static thrombogenicity test was applied to study platelet adhesion from PRP adjusted to 50,000 platelets per µL on three different polymers: medical grade polytetrafluoroethylene (PTFE), silicone and polyethylene terephthalate (PET). For the direct image-based approach, surface adherent platelets were fixed, fluorescently labelled and microscopically visualized. The image-based determination of platelet densities provided reference values for the comparison with data of the colorimetric assays. Correlation between standard platelet concentrations and ACP/LDH absorbance measurements were analysed to estimate accuracy and association of both parameters. ACP and LDH release from resting and ADP-stimulated platelets was studied to estimate how platelet activation influences colorimetric assay results. RESULTS: The density of adherent platelets ranged from 15,693 ± 2,487 platelets·mm-2 (PTFE) to 423 ± 99 platelets·mm-2 (silicone) and 4,621 ± 1,427 platelets·mm-2 (PET) and differed significantly between the three polymers (ANOVA: p <  0.05). Correlation coefficients between microscopic and colorimetric determination of platelet densities ranged between r = 0.93 (LDH, p <  0.001) and r = 0.94 (ACP, p <  0.001). ACP absorbance measurements of platelet standards with different concentrations corresponded well to an ideal linear regression, while LDH data either deceeded or exceeded the expected values. The LDH release during ADP-induced platelet activation was significantly higher compared to the release of ACP. CONCLUSION: For an adjusted platelet concentration of 50,000 platelets·µL-1, both colorimetric assays (ACP and LDH) allowed a similar accurate quantification of the mean platelet density compared to the microscopic evaluation. Better linearity of the assay standards, less variability of the results and a lower influence of platelet activation on the measurements mark the ACP assay as more suitable for the assessment of material surface adherent platelets compared to the LDH assay, particularly, if near physiological platelet concentrations are applied.

Usefulness of thromboelastometry in predicting the risk of bleeding in cirrhotics who undergo invasive procedures.

OBJECTIVES: The management of patients with liver cirrhosis undergoing invasive procedures is controversial and haemostasis assessment using routine laboratory is inappropriate. We evaluated the following: (a) the ability of thromboelastometry to predict the risk of bleeding in cirrhotic patients undergoing invasive procedures and enable a decision on the prophylactic transfusional strategy; (b) the contribution of platelet adhesion and aggregation tests in the assessment of haemostasis. PATIENTS AND METHODS: Seventeen cirrhotic patients undergoing invasive procedures were analyzed retrospectively (training set). To obtain preliminary data, an observational study was carried out in 58 patients (test set). All 75 patients were evaluated by thromboelastometry. Platelet adhesion and aggregation were evaluated in 16 patients using Multiplate, PFA-100 and Light Transmission Aggregometry. Factor VIII was dosed in all patients of the test set. RESULTS: In the training set, thromboelastometry confirmed the haemostatic assessment shown by the conventional test only in 6/17 (35%) patients. In the test set, thromboelastometry identified all patients who had a bleeding event. In patients with a high risk of bleeding, the use of thromboelastometry was cost-effective, reducing the platelet infusions by 64%. Platelet adhesion/aggregation abnormalities were observed in 15/16 (94%) patients, but bleeding events occurred only in 2/15 (13%) patients. CONCLUSION: Thromboelastometry appears to be useful to screen cirrhotic patients undergoing invasive procedures to identify the risk of bleeding and to optimize the transfusional strategy. Adhesion/aggregation tests are not useful in identifying patients at risk of bleeding and their application is not cost-effective.

Geometric design of microfluidic chambers: platelet adhesion versus accumulation.

Arterial, platelet-rich thrombosis depends on shear rates and integrin binding to either a collagen surface or to the growing thrombus, which are mechanistically different. In general, small microfluidic test sections may favor platelet-surface adhesion without testing for the primary mode of intra-arterial thrombosis, i.e. platelet-platelet bonding and accumulation. In the present report, the ratio of platelet-platelet to platelet-surface interactions, R, and the percentage of platelet-platelet interactions, P, are estimated using an analytical approach for circular and rectangular test sections. Results show that the test section geometry strongly affects both R and P, with test section height in low-aspect ratio channels or diameter greater than 90 µm dominated by platelet-platelet interactions (R >10). Increasing rectangular test section aspect ratio decreases the required height. R increases linearly while P approaches 100 % asymptotically with increasing channel dimension. Analysis of platelet shape shows that the assumption of spherical platelets has a small effect on R compared to discoid platelets adhering flat against test section wall. However, an increase in average platelet volume resulted in a large decrease in R. Nonetheless, Monte Carlo simulations of a typical distribution of human platelet sizes show intrasubject variation in platelet size has only a 10 % net effect on R. Finally, experiments of thrombus formation show that platelet-surface lag times and platelet-platelet accumulation are similar for rectangular microfluidic test sections and round test sections when R >10. The findings show that the size of a microfluidic test section should be carefully considered in studies of cell-cell accumulation versus cell-surface adhesion.

An anti-CD34 antibody-functionalized clinical-grade POSS-PCU nanocomposite polymer for cardiovascular stent coating applications: a preliminary assessment of endothelial progenitor cell capture and hemocompatibility.

In situ endothelialization of cardiovascular implants has emerged in recent years as an attractive means of targeting the persistent problems of thrombosis and intimal hyperplasia. This study aimed to investigate the efficacy of immobilizing anti-CD34 antibodies onto a POSS-PCU nanocomposite polymer surface to sequester endothelial progenitor cells (EPCs) from human blood, and to characterize the surface properties and hemocompatibility of this surface. Amine-functionalized fumed silica was used to covalently conjugate anti-CD34 to the polymer surface. Water contact angle, fluorescence microscopy, and scanning electron microscopy were used for surface characterization. Peripheral blood mononuclear cells (PBMCs) were seeded on modified and pristine POSS-PCU polymer films. After 7 days, adhered cells were immunostained for the expression of EPC and endothelial cell markers, and assessed for the formation of EPC colonies. Hemocompatibility was assessed by thromboelastography, and platelet activation and adhesion assays. The number of EPC colonies formed on anti-CD34-coated POSS-PCU surfaces was not significantly higher than that of POSS-PCU (5.0±1.0 vs. 1.7±0.6, p>0.05). However, antibody conjugation significantly improved hemocompatibility, as seen from the prolonged reaction and clotting times, decreased angle and maximum amplitude (p<0.05), as well as decreased platelet adhesion (76.8±7.8 vs. 8.4±0.7, p<0.05) and activation. Here, we demonstrate that POSS-PCU surface immobilized anti-CD34 antibodies selectively captured CD34+ cells from peripheral blood, although only a minority of these were EPCs. Nevertheless, antibody conjugation significantly improves the hemocompatibility of POSS-PCU, and should therefore continue to be explored in combination with other strategies to improve the specificity of EPC capture to promote in situ endothelialization.