Retrospective Risk Assessment of Injuries and Fatalities in the Forestry and Logging Workforce in the United States, 2003-2019.

OBJECTIVES: The objectives of this study on the forestry and logging workforce are to: 1) Analyze causes of injuries/fatalities to inform future intervention studies focused on risk mitigation, 2) determine whether there are any trends or associations between work-related risk factors and workplace injuries/fatalities over a 16-year period (2003-2019), and 3) identify knowledge gaps related to injuries and fatalities for future studies to address. METHODS: Data on fatalities, injuries, and illnesses of the forestry and logging workforce from the United States Bureau of Labor Statistics were analyzed. Correlation analysis (p < .05) was conducted to assess the relationship between causes of forestry and logging workforce fatalities by cause of fatality in the United States. Injury and fatality rates were calculated for each year (fatalities: 2003-2018; injuries: 2005-2019) and time span-specific incidence rates were calculated by cause. RESULTS: Contact with objects and equipment was the primary cause of injuries and fatalities in the forestry and logging workforce during the study period. Transportation-related incidents ranked second as the cause of fatalities, while the category of falls, slips, and trips was the second leading cause of injuries. CONCLUSION: Gaps in occupational health and safety identified by this study should be collaboratively addressed by researchers and the forestry industry.

Can community monitoring save the commons? Evidence on forest use and displacement.

Rapid deforestation is a major driver of greenhouse-gas emissions (1). One proposed policy tool to halt deforestation is community forest management. Even though communities manage an increasing proportion of the world's forests, we lack good evidence of successful approaches to community forest management. Prior studies suggest that successful approaches require a number of "design conditions" to be met. However, causal evidence on the effectiveness of individual design conditions is scarce. This study isolates one design condition, community-led monitoring of the forest, and provides causal evidence on its potential to reduce forest use. The study employs a randomized controlled trial to investigate the impact of community monitoring on forest use in 110 villages in Uganda. We explore the impact of community monitoring in both monitored and unmonitored areas of the forest, using exceptionally detailed data from on-the-ground measurements and satellite imagery. Estimates indicate that community monitoring does not affect our main outcome of interest, a forest-use index. However, treatment villages see a relative increase in forest loss outside of monitored forest areas compared to control villages. This increase is seen both in nonmonitored areas adjacent to treatment villages and in nonmonitored areas adjacent to neighboring villages not included in the study. We tentatively conclude that at least part of the increase in forest loss in nonmonitored areas is due to displacement of forest use by members of treatment villages due to fear of sanctions. Interventions to reduce deforestation should take this potentially substantial effect into consideration.

Abrupt increase in harvested forest area over Europe after 2015.

Forests provide a series of ecosystem services that are crucial to our society. In the European Union (EU), forests account for approximately 38% of the total land surface1. These forests are important carbon sinks, and their conservation efforts are vital for the EU's vision of achieving climate neutrality by 20502. However, the increasing demand for forest services and products, driven by the bioeconomy, poses challenges for sustainable forest management. Here we use fine-scale satellite data to observe an increase in the harvested forest area (49 per cent) and an increase in biomass loss (69 per cent) over Europe for the period of 2016-2018 relative to 2011-2015, with large losses occurring on the Iberian Peninsula and in the Nordic and Baltic countries. Satellite imagery further reveals that the average patch size of harvested area increased by 34 per cent across Europe, with potential effects on biodiversity, soil erosion and water regulation. The increase in the rate of forest harvest is the result of the recent expansion of wood markets, as suggested by econometric indicators on forestry, wood-based bioenergy and international trade. If such a high rate of forest harvest continues, the post-2020 EU vision of forest-based climate mitigation may be hampered, and the additional carbon losses from forests would require extra emission reductions in other sectors in order to reach climate neutrality by 20503.

[Occupational factors associated with suicide among French employees from the special agricultural social security scheme (MSA) working between 2007 and 2013]. / Facteurs professionnels en lien avec le suicide au sein des salariés affiliés à la Mutualité sociale agricole (MSA) et en activité entre 2007 et 2013.

BACKGROUND: Work and related exposures may play a role in suicide and there has been evidence in the literature that some occupational factors may be associated with suicide. The identification of occupational risk factors of suicide mortality among employees affiliated to the French special agricultural social security scheme (MSA), an understudied population, appears important. The objective of this study was to identify the occupational factors associated with suicide mortality among French employees from the MSA working between 2007 and 2013. METHODS: The study population included all the employees affiliated to the MSA working between 1st January 2007 and 31st December 2013, i.e. 1,699,929 men and 1,201,017 women. The studied occupational factors included: economic activity, skill level, and work contract. Survival analyses (Cox models) stratified on gender were performed using age as time scale and region and year of contract as adjustment variables. RESULTS: Among men, the factors associated with an elevated suicide risk were: economic activities of forestry, agriculture and related activities, and manufacture of food products and beverages (e.g. meat, wine), low-skilled level and working in the regions of Brittany, Burgundy Franche-Comté, Pays de la Loire, Normandy, Grand Est and Centre-Val-de-Loire. No association was observed among women. CONCLUSION: These results suggest that economic activity and low-skilled level may be associated with suicide among men affiliated to the MSA and may contribute to the implementation of prevention interventions. Further studies are needed to confirm and better understand these associations.

[Accident at work and occupational diseases for the foresters]. / Accidents du travail et maladies professionnelles chez les forestiers : un risque fort dans un secteur en mutation.

Professional accidents and occupational diseases are a major subject for the workers and the social welfare policy. The workers in forest are particularly exposed to accidents. This is a sector that will be essential for dressing the ecological challenges of the xxith century, and could generate many new jobs. The present article proposes a statistical analysis of the accidents and the diseases witch affect the forest workers from the data of the CCMSA, in order to explore potential ways for improving their working conditions and safety.

Worker heat stress prevention and work metabolism estimation: comparing two assessment methods of the heart rate thermal component.

The heart rate thermal component ( ΔHRT ) can increase with body heat accumulation and lead to work metabolism (WM) overestimation. We used two methods (VOGT and KAMP) to assess ΔHRT of 35 forest workers throughout their work shifts, then compared ΔHRT at work and at rest using limits of agreement (LoA). Next, for a subsample of 20 forest workers, we produced corrected WM estimates from ΔHRT and compared them to measured WM. Although both methods produced significantly different ΔHRT time-related profiles, they yielded comparable average thermal cardiac reactivity (VOGT: 24.8 bpm °C-1; KAMP: 24.5 bpm °C-1), average ΔHRT (LoA: 0.7 ± 11.2 bpm) and average WM estimates (LoA: 0.2 ± 3.4 ml O2 kg-1min-1 for VOGT, and 0.0 ± 5.4 ml O2 kg-1min-1 for KAMP). Both methods are suitable to assess heat stress through ΔHRT and improve WM estimation. Practitioner summary: We compared two methods for assessing the heart rate thermal component ( ΔHRT ), which is needed to produce a corrected HR profile for estimating work metabolism (WM). Both methods yielded similar ΔHRT estimates that allowed accurate estimations of heat stress and WM at the group level, but they were imprecise at the individual level. Abbreviations: AIC: akaike information criterion; bpm: beats per minute; CI: confidence intervals; CV: coefficient of variation in %; CV drift: cardiovascular drift; ΔHRT: the heart rate thermal component in bpm; ΔHRT: the heart rate thermal component in bpm; ΔΔHRT: variation in the heart rate thermal component in bpm; ΔTC: variation in core body temperature in °C; HR: heart rate in bpm; HRmax: maximal heart rate in bpm; Icl: cloting insulation in clo; KAMP: Kampmann et al. (2001) method to determe ΔHRT; LoA: Limits of Agreement; PMV-PPD: the Predicted Mean Vote and Predicted Percentage Dissatisfied; PHS: Predicted Heat Strain model; RCM: random coefficients model; SD: standard deviation; TC: core body temperature in °C; TCR: thermal cardiac reactivity in bpm °C-1; τΔHRT: rate of change in the heart rate thermal component in bpm min-1; τTC: rate of change in core body temperature in °C min-1; tα,n-1: Student's t statistic with level of confidence alpha and n-1 degrees of freedom; TWL: Thermal Work Limit model; V̇O2 : oxygen consumption in ml O2 kg-1 min-1; V̇O2 max: maximal oxygen consumption in ml O2 kg-1 min-1; VOGT: Vogt et al. (1973) method to determine ΔHRT; WBGT: Wet-Bulb Globe Temperature in °C; WM: work metabolism.

Environmental Life Cycle Assessment of industrial pine roundwood production in Brazilian forests.

Pine (Pinus oocarpa) wood has great economic importance in Brazil. Pine stands represent the second largest reforested area in the country due to their industrial interest. Combining the relevance of industrial pine stands in the country and corresponding environmental concerns, this current study aims to identify and quantify the environmental impacts derived from industrial pine roundwood production in Brazil. The environmental study was developed considering the Life Cycle Assessment (LCA) methodology according to ISO14040 framework. The study convers the life cycle of pine roundwood production from cradle-to-forest gate perspective and considers the current practices in the country. The production system was divided in five main stages: Soil preparation, seedlings plantation, forest management, forest harvesting and infrastructure establishment. The environmental profile was estimated considering characterization factors from the ReCiPe method, in terms of twelve impact categories. According to the results, forest harvesting stage was identified as the environmental hotspot being the main responsible of contributions to nine impact categories under assessment with contributing ratios ranging from 21% (e.g., freshwater eutrophication) to 76% (e.g., photochemical oxidants formation). The high amount of fossil fuel required by heavy machinery used in the activities involved in this stage is behind this result. Soil preparation stage reported also an outstanding contribution in categories such as freshwater eutrophication (37%) and toxicity related categories (≈35%). The rationale behind these contributions is associated with the use of chemical fertilizers, mostly superphosphate. The identification of the environmental hotspots in forest biomass production can assist the Brazilian forest practitioners to improve the environmental profile by means of the optimization of forest practices.

A mixed-methods analysis of logging injuries in Montana and Idaho.

BACKGROUND: Despite advances in mechanization, logging continues to be one of the most dangerous occupations in the United States. Logging in the Intermountain West region (Montana and Idaho) is especially hazardous due to steep terrain, extreme weather, and remote work locations. METHODS: We implemented a mixed-methods approach combining analyses of workers' compensation claims and focus groups to identify factors associated with injuries and fatalities in the logging industry. RESULTS: Inexperienced workers (>6 months experience) accounted for over 25% of claims. Sprain/strain injuries were the most common, accounting for 36% of claims, while fatalities had the highest median claim cost ($274 411). Focus groups identified job tasks involving felling trees, skidding, and truck driving as having highest risk. CONCLUSIONS: Injury prevention efforts should focus on training related to safe work methods (especially for inexperienced workers), the development of a safety culture and safety leadership, as well as implementation of engineering controls.

Protected areas and agricultural expansion: Biodiversity conservation versus economic growth in the Southeast of Brazil.

The conversion of natural ecosystems to agricultural land and urban areas plays a threat to the protected areas and the natural ecosystems conservation. The aim of this paper is to provide an analysis of the agricultural expansion and its impact on the landscape spatial and temporal patterns in a buffer zone of a protected area located in the transition zone between the Atlantic Forest and Cerrado, in the State of São Paulo, Brazil. The land use and land cover were mapped between 1971 and 2008 and landscape metrics were calculated to provide a spatiotemporal analysis of the forest structure and the expansion of the croplands. The results showed that the landscape patterns were affected by the economic cycles. The predominant crop surrounding the protected area is sugar cane, which increased by 39% during this period, followed by citrus. This landscape change is connected to the Brazilian oil crisis in 1973. The rapid expansion of sugar cane was largely driven by Brazil's biofuel program, the "Proálcool" (pro-alcohol), a project in 1975 that mixed ethanol with gas for automotive fuel. The forest loss occurred mainly between 1971 and 1988, decreasing the forest cover from 17% in 1971 to 12.7% in 2008. Most of the forest patches are smaller than 50 ha and has low connectivity. Throughout the years, the fragments in the buffer zone have become smaller and with an elongated shape, and the park has become isolated. This forest fragmentation process and the predominance of monoculture lands in the buffer zone threaten the protected areas, and can represent a barrier for these areas to provide the effective biodiversity conservation. The measures proposed are necessary to ensure the capability of this ecosystem to sustain its original biodiversity.

Using spatial metrics and surveys for the assessment of trans-boundary deforestation in protected areas of the Maya Mountain Massif: Belize-Guatemala border.

Understanding the trans-boundary deforestation history and patterns in protected areas along the Belize-Guatemala border is of regional and global importance. To assess deforestation history and patterns in our study area along a section of the Belize-Guatemala border, we incorporated multi-temporal deforestation rate analysis and spatial metrics with survey results. This multi-faceted approach provides spatial analysis with relevant insights from local stakeholders to better understand historic deforestation dynamics, spatial characteristics and human perspectives regarding the underlying causes thereof. During the study period 1991-2014, forest cover declined in Belize's protected areas: Vaca Forest Reserve 97.88%-87.62%, Chiquibul National Park 99.36%-92.12%, Caracol Archeological Reserve 99.47%-78.10% and Colombia River Forest Reserve 89.22%-78.38% respectively. A comparison of deforestation rates and spatial metrics indices indicated that between time periods 1991-1995 and 2012-2014 deforestation and fragmentation increased in protected areas. The major underlying causes, drivers, impacts, and barriers to bi-national collaboration and solutions of deforestation along the Belize-Guatemala border were identified by community leaders and stakeholders. The Mann-Whitney U test identified significant differences between leaders and stakeholders regarding the ranking of challenges faced by management organizations in the Maya Mountain Massif, except for the lack of assessment and quantification of deforestation (LD, SH: 18.67, 23.25, U = 148, p > 0.05). The survey results indicated that failure to integrate buffer communities, coordinate among managing organizations and establish strong bi-national collaboration has resulted in continued ecological and environmental degradation. The information provided by this research should aid managing organizations in their continued aim to implement effective deforestation mitigation strategies.

Who Cares about Forests and Why? Individual Values Attributed to Forests in a Post-Frontier Region in Amazonia.

Understanding the multiple ways people value forests is important, as individual values regarding nature have been shown to partly determine willingness to participate in conservation initiatives. As individual values are influenced by past experiences, the way people value forests may be related to the ecosystem services they use and receive. We here aim to investigate if people value forests because of material and non-material benefits forest provide (material and non-material values), and if these values are defined by previous experiences associated with using forest resources and having frequent contact with forests. By interviewing 363 residents across 20 landscapes varying in forest cover in a post-frontier region in Amazonia, we evaluated: (1) if the use of forest resources-especially bushmeat, important for sustenance and cash income in virtually all tropical forests-is associated with attributing higher material value to forests; (2) whether the contact with forest (estimated by local forest cover and visits to forests) is associated with attributing higher non-material value to forests. As expected, respondents from households where hunting occurs and bushmeat consumption is more frequent attributed higher material value to forests, and those living in more deforested landscapes and that visited forests less often attributed lower non-material value to forests. The importance of bushmeat in shaping the way people value forests suggests that encouraging the sustainable use of this product will encourage forest conservation. Results also point to a potential dangerous reinforcing cycle: low forest cover and the loss of contact with forests may erode forest values and facilitate further deforestation. Engaging rural communities in forest conservation initiatives is challenging yet urgent in degraded landscapes, although harnessing appreciation for bushmeat could offer a starting point.

Large-Scale Variations in Lumber Value Recovery of Yellow Birch and Sugar Maple in Quebec, Canada.

Silvicultural restoration measures have been implemented in the northern hardwoods forests of southern Quebec, Canada, but their financial applicability is often hampered by the depleted state of the resource. To help identify sites most suited for the production of high quality timber, where the potential return on silvicultural investments should be the highest, this study assessed the impact of stand and site characteristics on timber quality in sugar maple (Acer saccharum Marsh.) and yellow birch (Betula alleghaniensis Britt.). For this purpose, lumber value recovery (LVR), an estimate of the summed value of boards contained in a unit volume of round wood, was used as an indicator of timber quality. Predictions of LVR were made for yellow birch and sugar maple trees contained in a network of more than 22000 temporary sample plots across the Province. Next, stand-level variables were selected and models to predict LVR were built using the boosted regression trees method. Finally, the occurrence of spatial clusters was verified by a hotspot analysis. Results showed that in both species LVR was positively correlated with the stand age and structural diversity index, and negatively correlated with the number of merchantable stems. Yellow birch had higher LVR in areas with shallower soils, whereas sugar maple had higher LVR in regions with deeper soils. The hotspot analysis indicated that clusters of high and low LVR exist across the province for both species. Although it remains uncertain to what extent the variability of LVR may result from variations in past management practices or in inherent site quality, we argue that efforts to produce high quality timber should be prioritized in sites where LVR is predicted to be the highest.

Geospatial assessment and monitoring of historical forest cover changes (1920-2012) in Nilgiri Biosphere Reserve, Western Ghats, India.

Deforestation in the biosphere reserves, which are key Protected Areas has negative impacts on biodiversity, climate, carbon fluxes and livelihoods. Comprehensive study of deforestation in biosphere reserves is required to assess the impact of the management effectiveness. This article assesses the changes in forest cover in various zones and protected areas of Nilgiri Biosphere Reserve, the first declared biosphere reserve in India which forms part of Western Ghats-a global biodiversity hotspot. In this study, we have mapped the forests from earliest available topographical maps and multi-temporal satellite data spanning from 1920's to 2012 period. Mapping of spatial extent of forest cover, vegetation types and land cover was carried out using visual interpretation technique. A grid cell of 1 km × 1 km was generated for time series change analysis to understand the patterns in spatial distribution of forest cover (1920-1973-1989-1999-2006-2012). The total forest area of biosphere reserve was found to be 5,806.5 km(2) (93.8 % of total geographical area) in 1920. Overall loss of forest cover was estimated as 1,423.6 km(2) (24.5 % of the total forest) with reference to 1920. Among the six Protected Areas, annual deforestation rate of >0.5 was found in Wayanad wildlife sanctuary during 1920-1973. The deforestation in Nilgiri Biosphere Reserve is mainly attributed to conversion of forests to plantations and agriculture along with submergence due to construction of dams during 1920 to 1989. Grid wise analysis indicates that 851 grids have undergone large-scale negative changes of >75 ha of forest loss during 1920-1973 while, only 15 grids have shown >75 ha loss during 1973-1989. Annual net rate of deforestation for the period of 1920 to 1973 was calculated as 0.5 followed by 0.1 for 1973 to 1989. Our analysis shows that there was large-scale deforestation before the declaration of area as biosphere reserve in 1986; however, the deforestation has drastically reduced after the declaration due to high degree of protection, thus indicating the secure future of reserve in the long term under the current forest management practices. The present work will stand as the most up-to-date assessment on the forest cover of the Nilgiri Biosphere Reserve with immediate applications in monitoring and management of forest biodiversity.

Merging national forest and national forest health inventories to obtain an integrated forest resource inventory--experiences from Bavaria, Slovenia and Sweden.

BACKGROUNDS, MATERIAL AND METHODS: To meet the demands of sustainable forest management and international commitments, European nations have designed a variety of forest-monitoring systems for specific needs. While the majority of countries are committed to independent, single-purpose inventorying, a minority of countries have merged their single-purpose forest inventory systems into integrated forest resource inventories. The statistical efficiencies of the Bavarian, Slovene and Swedish integrated forest resource inventory designs are investigated with the various statistical parameters of the variables of growing stock volume, shares of damaged trees, and deadwood volume. The parameters are derived by using the estimators for the given inventory designs. The required sample sizes are derived via the general formula for non-stratified independent samples and via statistical power analyses. The cost effectiveness of the designs is compared via two simple cost effectiveness ratios. RESULTS: In terms of precision, the most illustrative parameters of the variables are relative standard errors; their values range between 1% and 3% if the variables' variations are low (s%<80%) and are higher in the case of higher variations. A comparison of the actual and required sample sizes shows that the actual sample sizes were deliberately set high to provide precise estimates for the majority of variables and strata. In turn, the successive inventories are statistically efficient, because they allow detecting the mean changes of variables with powers higher than 90%; the highest precision is attained for the changes of growing stock volume and the lowest for the changes of the shares of damaged trees. Two indicators of cost effectiveness also show that the time input spent for measuring one variable decreases with the complexity of inventories. CONCLUSION: There is an increasing need for credible information on forest resources to be used for decision making and national and international policy making. Such information can be cost-efficiently provided through integrated forest resource inventories.

A large-scale field assessment of carbon stocks in human-modified tropical forests.

Tropical rainforests store enormous amounts of carbon, the protection of which represents a vital component of efforts to mitigate global climate change. Currently, tropical forest conservation, science, policies, and climate mitigation actions focus predominantly on reducing carbon emissions from deforestation alone. However, every year vast areas of the humid tropics are disturbed by selective logging, understory fires, and habitat fragmentation. There is an urgent need to understand the effect of such disturbances on carbon stocks, and how stocks in disturbed forests compare to those found in undisturbed primary forests as well as in regenerating secondary forests. Here, we present the results of the largest field study to date on the impacts of human disturbances on above and belowground carbon stocks in tropical forests. Live vegetation, the largest carbon pool, was extremely sensitive to disturbance: forests that experienced both selective logging and understory fires stored, on average, 40% less aboveground carbon than undisturbed forests and were structurally similar to secondary forests. Edge effects also played an important role in explaining variability in aboveground carbon stocks of disturbed forests. Results indicate a potential rapid recovery of the dead wood and litter carbon pools, while soil stocks (0-30 cm) appeared to be resistant to the effects of logging and fire. Carbon loss and subsequent emissions due to human disturbances remain largely unaccounted for in greenhouse gas inventories, but by comparing our estimates of depleted carbon stocks in disturbed forests with Brazilian government assessments of the total forest area annually disturbed in the Amazon, we show that these emissions could represent up to 40% of the carbon loss from deforestation in the region. We conclude that conservation programs aiming to ensure the long-term permanence of forest carbon stocks, such as REDD+, will remain limited in their success unless they effectively avoid degradation as well as deforestation.

Occupational diseases among workers employed in various branches of the national economy.

INTRODUCTION: The purpose is to present the incidence of occupational diseases and their causal factors in the sections and divisions of the national economy in Poland. MATERIAL AND METHODS: The analysis is based on the cases of occupational diseases obligatorily reported in 2009-2011 from all over the country to the Central Register of Occupational Diseases. Data is presented as absolute numbers and average annual incidence rates per 100 000 persons employed in NACE-classified sections and divisions. RESULTS: 'lhe average annual incidence of occupational diseases was 20.6 cases per 100 000 of employed people. The highest rates were recorded in mining and quarrying (337.8), the production of metals (169.8), non-metallic mineral products (81.6), motor vehicles and transport equipment (59.7), chemicals (30.1). Specific situation in which high incidence rate is due to a single discase prevails in forestry, where tick-borne diseases represent 96.3% of all recorded cases, in education, where chronic voice disorders account for 96.5% of cases, and in human health and social work activities, where infectious diseases with the dominant hepatitis C represent 68.2% of the cases. Tlhe most common causes of occupational diseases in sections and industrial divisions with the highest incidence included: industrial dust, noise and vibration. In the manufacturing industry asbestos was the cause of 20.5% of occupational diseases and 55% of occupational cancers. CONCLUSIONS: Careful monitoring of working conditions and implementing health prevention programs should be exercised in sections and divisions of the national economy where a high risk of occupational diseases has been found.