Applicability of Low-Cost Binders for the Quantitative Elemental Analysis of Urinary Stones Using EDXRF Based on Fundamental Parameter Approach.

The pressed powder sample is a common method for elemental analysis using X-ray fluorescence analysis whereas suitable light hydrocarbon materials should be added to the sample as a binder. The present study demonstrates the applicability of using different commercial binders for elemental analysis of urinary stone samples. In order to confirm the obtained results, a comparison with pure chemical grade binders was presented. Different commercial and pure binders were tested for quantitative elemental analysis of urinary stones, namely, cellulose, starch, wax, and urea. Energy dispersive X-ray fluorescence (EDXRF) was used for elemental analysis. Differential thermal analysis was used to estimate the loss on ignition (LOI) in the urinary stone samples. The signal to background ratios (I/IB) of the different detected elements in the commercial and pure binders were calculated, compared, and studied at eight different photon energies starting from 2.5 up to 37 keV. Standard-less quantitative analysis method based on the fundamental parameter approach was applied for elemental analysis of selected urinary stones. The commercial and low-cost binders could be an excellent alternative binder for urinary stone analysis using energy dispersive X-ray fluorescence. The commercial binders could provide an advantage as pure chemical grade binders or even better especially at photon energy higher than 10 keV. The best commercial binder candidate was found to be the wax. The quantitative analysis results using commercial and pure chemical grade binders give good agreement results, which indicate the applicability of commercial binders for quantitative elemental analysis of urinary stones in the form of pressed powder samples.

Building the Material Flow Networks of Aluminum in the 2007 U.S. Economy.

Based on the combination of the U.S. economic input-output table and the stocks and flows framework for characterizing anthropogenic metal cycles, this study presents a methodology for building material flow networks of bulk metals in the U.S. economy and applies it to aluminum. The results, which we term the Input-Output Material Flow Networks (IO-MFNs), achieve a complete picture of aluminum flow in the entire U.S. economy and for any chosen industrial sector (illustrated for the Automobile Manufacturing sector). The results are compared with information from our former study on U.S. aluminum stocks and flows to demonstrate the robustness and value of this new methodology. We find that the IO-MFN approach has the following advantages: (1) it helps to uncover the network of material flows in the manufacturing stage in the life cycle of metals; (2) it provides a method that may be less time-consuming but more complete and accurate in estimating new scrap generation, process loss, domestic final demand, and trade of final products of metals, than existing material flow analysis approaches; and, most importantly, (3) it enables the analysis of the material flows of metals in the U.S. economy from a network perspective, rather than merely that of a life cycle chain.

Structural Investigation of Aluminum in the U.S. Economy using Network Analysis.

Metals are used in numerous products and are sourced via increasingly global and complex supply chains. Monetary input-output tables (MIOT) and network analysis can be applied to intersectoral supply chains and used to analyze structural aspects. We first provide a concise review of the literature related to network analysis applied to MIOTs. On the basis of a physical input-output table (PIOT) table of aluminum in the United States economy in 2007, we identify key sectors and discuss the overall topology of the aluminum network using tools of network analysis. Sectors highly dependent on metal product inputs or sales are identified using weighted degree centrality and their hierarchical organization is explored via clustering. Betweenness centrality and random walk centrality (page rank) are explored as means to identify network bottlenecks and relative sector importance. Aluminum, even though dominated by uses in the automobile, beverage and containers, and construction industries, finds application in a wide range of sectors. Motor vehicle parts manufacturing relies on a large number of upstream and downstream suppliers to function. We conclude by analyzing structural aspects of a subnetwork for automobile manufacturing and discuss how the use of network analysis relates to current criticality analyses of metal and mineral resources.

Mapping the global journey of anthropogenic aluminum: a trade-linked multilevel material flow analysis.

Material cycles have become increasingly coupled and interconnected in a globalizing era. While material flow analysis (MFA) has been widely used to characterize stocks and flows along technological life cycle within a specific geographical area, trade networks among individual cycles have remained largely unexplored. Here we developed a trade-linked multilevel MFA model to map the contemporary global journey of anthropogenic aluminum. We demonstrate that the anthropogenic aluminum cycle depends substantially on international trade of aluminum in all forms and becomes highly interconnected in nature. While the Southern hemisphere is the main primary resource supplier, aluminum production and consumption concentrate in the Northern hemisphere, where we also find the largest potential for recycling. The more developed countries tend to have a substantial and increasing presence throughout the stages after bauxite refining and possess highly consumption-based cycles, thus maintaining advantages both economically and environmentally. A small group of countries plays a key role in the global redistribution of aluminum and in the connectivity of the network, which may render some countries vulnerable to supply disruption. The model provides potential insights to inform government and industry policies in resource criticality, supply chain security, value chain management, and cross-boundary environmental impacts mitigation.

Mineração e ecologia política: um estudo de caso em Itamarati de Minas / Mining and political ecology: a case study in the Foreign Ministry of Mines

A presente tese é composta de três artigos sobre os impactos ao ambiente e àsaúde coletiva da cadeia produtiva do alumínio no Brasil. O primeiro artigo versa sobreos impactos produzidos ao longo das etapas produtivas do alumínio primário, a partir daextração da bauxita, até a fabricação final. O texto realça e discute os processos deexternalidades ambientais, inerentes ao processo, que são responsáveis pela degradaçãoambiental e pela produção de danos à saúde coletiva, como os relacionados aosacidentes de trabalho ou aqueles associados às emissões de gases do efeito estufa. Osegundo artigo faz uma discussão sobre o modelo de inserção do Brasil no mercadomundial do alumínio a partir dos referenciais teóricos da economia espacial e daecologia política. A inserção do Brasil no mercado global de alumínio é apresentada soba lógica da subordinação ao grande capital; uma lógica em que os territórios se adequamcomo suportes produtivos de commodities, agrícolas ou metálicas. A produção eexportação de commodities reproduz uma Divisão Internacional do Trabalho marcadapela participação submissa dos territórios produtivos, que sofrem os efeitos colaterais damodernização, com impactos ao ambiente e à saúde da população. O terceiro ederradeiro artigo, é um estudo de caso sobre os impactos da mineração de bauxita nomunicípio de Itamarati de Minas, em Minas Gerais. No texto são apresentadas ascaracterísticas do processo de extração de bauxita e sua articulação aos impactosambientais e a diminuição da qualidade de vida das famílias que tradicionalmentepraticam uma pequena agricultura familiar. O artigo discute ainda, questões quecolocam em risco a sustentabilidade socioambiental da região, como a própria atividademineral que, além do desflorestamento, geram impactos como a redução da qualidadedos solos, erosão e assoreamento; e o avanço da monocultura do eucalipto que nosúltimos anos vêm substituindo a vegetação original de áreas mineradas. Por fim,conclui-se que a inserção do país no mercado global de alumínio tem sido construída apartir da geração de pesados impactos ao ambiente nos territórios e à saúde coletiva depopulações; no caso do município de Itamarati de Minas, torna-se patente a necessidadede se pensar um modelo de desenvolvimento alternativo para a agricultura familiar; ummodelo baseado em formas sustentáveis de produção, democrático e socialmente justo.

Occupational exposure to beryllium in primary aluminium production.

Alumina used in the production of primary aluminium contains Be which partly vaporises from the cryolite bath into the workroom atmosphere. Since Be may be toxic at lower exposure levels than previously thought, the personal exposure to Be among workers in 7 Norwegian primary smelters has been assessed. In total, 480 personal Respicon® virtual impactor full shift air samples have been collected during 2 sampling campaigns and analysed for water soluble Be, Al and Na using inductively coupled plasma optical emission spectrometry. In addition, water soluble F(-) has been measured by ion chromatography. The Be air concentrations in the inhalable, thoracic and respirable aerosol fractions have been calculated. The Be concentrations in the inhalable aerosol fraction vary between the different smelters. The highest GM concentration of Be in the inhalable fraction (122 ng m(-3), n = 30) was measured in the prebake pot room of a smelter using predominantly Jamaican alumina where also the highest individual air concentration of 270 ng m(-3) of Be was identified. The relative distribution of Be in the different aerosol fractions was fairly constant with the mean Be amount for the two sampling campaigns between 44-49% in the thoracic fraction expressed as % of the inhalable amount. Linear regression analysis shows a high correlation between water soluble Be, Al, F and Na describing an average measured chemical bulk composition of the water soluble thoracic fraction as Na(5.7)Al(3.1)F(18). Be is likely to be present as traces in this particulate matter by replacing Al atoms in the condensed fluorides and/or as a major element in a nanoparticle sized fluoride. Thus, the major amount of Be present in the work room atmosphere of Al smelter pot rooms will predominantly be present in combination with substantial amounts of water soluble Al, F and Na.

Reducing the cost of production of bimetallic aluminium catalysts for the synthesis of cyclic carbonates.

Bimetallic aluminium complexes of general formula [(salen)Al](2)O or [(acen)Al](2)O catalyse the formation of cyclic carbonates from carbon dioxide and terminal epoxides under exceptionally mild reaction conditions. To improve the potential for industrial scale application of these catalysts, the cost of their production has been evaluated and reduced significantly by optimization of the synthesis, including replacement of the most expensive chemicals by less expensive alternatives. The largest cost saving was associated with the formation of aluminium triethoxide in situ, which reduced the cost of the chemicals need for production of the catalysts by 49-87 %. Further savings were made by avoiding the use of tetrabutylammonium bromide and acetonitrile, resulting in overall cost savings of 68-93 %.

Review of recycling performance indicators: a study on collection rate in Taiwan.

The Taiwan Environmental Protection Administration (Taiwan EPA) launched a national Extended Producer Responsibility (EPR) system after integrating eight private recycling organizations in 1998. After that, the environmental performance of the EPR system brought a lot of attention to policy makers. Many studies show positive environmental effects of the EPR system in Taiwan. However, there are controversial questions remained, such as whether the performance indicators used are the right choice to estimate the environmental effects of the recycling policy? Can those estimated results really reflect the performance of the system? This paper would therefore like to more accurately evaluate the performance indicators of the EPR system based on data observed over the past decade in Taiwan. In the process of evaluating the performance indicators, we have found that the collection rates for durable goods are often ignored in countries that pursue a zero waste policy. This may affect the actual recycling outcome and resource direction targeted by producers. However, in order for the collection rate to be adopted as a policy indicator, how to estimate the amounts of retired or waste products during a period is critical. In this paper, we estimate the collection rate for electrical and electronic waste by using the survival analysis and ownership data analysis approaches. We also provide a comparison of both approaches and put forward suggestions for directions in the future in solid waste management.

Solid waste from aluminum recycling process: characterization and reuse of its economically valuable constituents.

Due to economic advantages, many companies in Brazil recover Al from the process of crushing and water-leaching of secondary aluminum dross. Wastes from this process (non-metallic products and salts) are usually landfilled or disposed without treatment, causing many environmental damages. The purpose of this work is to investigate, in a recycling company sited in Sao Paulo metropolitan area (Brazil), the potential use of the non-metallic product (NMP) in the production of concrete blocks and to evaluate the presence of important chemical compounds that may be useful for other applications. Chemical and mineralogical analyses revealed that NMP is composed of refractory and abrasive oxides (alpha-Al2O3, MgAl2O4, SiO2) and an important source of transition alumina: alpha-Al(OH)3. Concrete blocks were made by adding two parts of NMP to one part of cement and four parts of sand. The blocks were tested according to the Brazilian standard (NBR7173/1982) and they passed dimension, humidity and absorption tests but not compressive strength tests. However, particular NMP constituents have accelerated the strength rate development of the blocks, thus decreasing working time. The commercial use of NMP can reduce the amount of discarded wastes contributing to environmental preservation.

How I turned a critical public into useful consultants.

When Peter Johnson was an executive in the private sector, he viewed conflict with company outsiders as, at best, an annoyance. But when Johnson became the administrator of Bonneville Power Administration in Portland, Oregon, he realized that outsiders had the power to bring the organization down. To survive, BPA had to listen to the people affected by the agency's decisions-BPA's harshest critics. BPA had long been respected, but by the time Johnson arrived in 1981, the agency was reviled. People were put off by BPA's father-knows-best approach to decision making, whereby the agency first made decisions and then explained them. So Johnson took what many thought was an unimaginable risk. Despite the warnings of attorneys and his own deep apprehensions, he opened up BPA's decision making to the public. The first attempts to involve BPA's critics were full of fireworks, but thanks to BPA's rock-solid commitment to public involvement, success soon followed. Experiences early on proved to Johnson that involving the public in BPA's decision making was a practical alternative to litigation. Moreover, BPA's stakeholders--once the agency's adversaries--became BPA's partners in making better decisions, and the agency gained authority and legitimacy.