An overview of innovations and industrial solutions in Protein Microarray Technology.

The complexity involving protein array technology reflects in the fact that instrumentation and data analysis are subject to change depending on the biological question, technical compatibility of instruments and software used in each experiment. Industry has played a pivotal role in establishing standards for future deliberations in sustenance of these technologies in the form of protein array chips, arrayers, scanning devices, and data analysis software. This has enhanced the outreach of protein microarray technology to researchers across the globe. These have encouraged a surge in the adaptation of "nonclassical" approaches such as DNA-based protein arrays, micro-contact printing, label-free protein detection, and algorithms for data analysis. This review provides a unique overview of these industrial solutions available for protein microarray based studies. It aims at assessing the developments in various commercial platforms, thus providing a holistic overview of various modalities, options, and compatibility; summarizing the journey of this powerful high-throughput technology.

Multiarray on a test strip (MATS): rapid multiplex immunodetection of priority potato pathogens.

Multiarray on a test strip (MATS) was developed for the detection of eight important potato pathogens. The proposed assay combines the rapidity of immunochromatography with the high throughput of array techniques. The test zone of the immunochromatographic strip comprises ordered rows of spots containing antibodies specific for different potato pathogens. The assay benefits from the simplicity of immunochromatography; colored immune complexes form at the corresponding spots within the test zone. The presence and intensity of the coloration are used for identification of the target pathogens. The MATS was applied to the simultaneous detection of eight priority potato pathogens, characterized by the following limits of detection: 1 ng/mL for potato virus X and the ordinary type of potato virus Y, 10 ng/mL for potato virus M, 20 ng/mL for potato leaf roll virus, 40 ng/mL for necrotic-type potato virus Y, 100 ng/mL for potato virus S, 300 ng/mL for potato virus A, and 10(4) cells/mL for Clavibacter michiganensis subsp. sepedonicus. Analysis time was 15 min. The observed sensitivity of the MATS was comparable to the traditional enzyme-linked immunosorbent assay. The developed technique was tested on potato leaf extracts, and its efficiency for on-site control of the pathogens was confirmed in 100 % by commercial LFIA test strips. Graphical abstract Location of binding zones in the developed multiarray on a test strip (MATS) for simultaneous detection of eight pathogens.

Evaluation of optical detection platforms for multiplexed detection of proteins and the need for point-of-care biosensors for clinical use.

This review investigates optical sensor platforms for protein multiplexing, the ability to analyze multiple analytes simultaneously. Multiplexing is becoming increasingly important for clinical needs because disease and therapeutic response often involve the interplay between a variety of complex biological networks encompassing multiple, rather than single, proteins. Multiplexing is generally achieved through one of two routes, either through spatial separation on a surface (different wells or spots) or with the use of unique identifiers/labels (such as spectral separation-different colored dyes, or unique beads-size or color). The strengths and weaknesses of conventional platforms such as immunoassays and new platforms involving protein arrays and lab-on-a-chip technology, including commercially-available devices, are discussed. Three major public health concerns are identified whereby detecting medically-relevant markers using Point-of-Care (POC) multiplex assays could potentially allow for a more efficient diagnosis and treatment of diseases.

Scalable high-density peptide arrays for comprehensive health monitoring.

There is an increasing awareness that health care must move from post-symptomatic treatment to presymptomatic intervention. An ideal system would allow regular inexpensive monitoring of health status using circulating antibodies to report on health fluctuations. Recently, we demonstrated that peptide microarrays can do this through antibody signatures (immunosignatures). Unfortunately, printed microarrays are not scalable. Here we demonstrate a platform based on fabricating microarrays (~10 M peptides per slide, 330,000 peptides per assay) on silicon wafers using equipment common to semiconductor manufacturing. The potential of these microarrays for comprehensive health monitoring is verified through the simultaneous detection and classification of six different infectious diseases and six different cancers. Besides diagnostics, these high-density peptide chips have numerous other applications both in health care and elsewhere.

Assessment of chemokine profiles in human skin biopsies by an immunoaffinity capillary electrophoresis chip.

Atopic dermatitis is a skin condition resulting in a skin rash from exposure to environmental factors. Skin biopsies taken from patients suffering from atopic dermatitis were micro-dissected and analyzed using a microchip-based immunoaffinity CE system for the presence of CXCL1, CXCL5 and CXCL8 and CCL1, CCL3 and CCL5 chemokines. Disposable immunoaffinity disks with immobilized antibodies were used to capture the CXC and CC chemokines from the homogenized skin samples. The captured analytes were then labeled with AlexaFluor 633, eluted from the disk and separated by CE. The labeled chemokines were identified and quantified by laser induced fluorescence. The total analysis time was less than 40min, including the biopsy microdissection, pre-analysis preparation of the sample and the ICE-CHIP analysis, which took less than 10min with inter- and intra-assay CV's below 6.4%. Microchip-based immunoaffinity CE could distinguish between normal skin biopsies and those with inflammation. Patients with neutrophil cellular infiltrates by histopathology showed increased concentrations of CXCL1, CXCL5 and CXCL8 while increases of CCL1, CCL3 and CCL5 corresponded to the patient group demonstrating monocytic and T-lymphocyte infiltration by histopathology. This system demonstrates the ability to identify and quantify immunochemical analytes in frozen sections taken from clinical histopathology samples.

Assessment of antibody specificity using suspension bead arrays.

With the increasing collection of affinity reagents, their validation in terms of functionality and binding specificity becomes a challenge. To match this growing need, miniaturized and parallelized platforms have become available to corroborate the applicability for a broad range of binder scaffolds. Among the -commonly used systems, planar microarrays have been a platform of choice for a long time but alternative systems are emerging, of which one is based on color-coded beads for the creation of arrays in suspension. The latter systems offer to perform a two-dimensional multiplexing by now analyzing up to 384 samples against up to 500 analytes in a single experiment. While the analyte parameter is flexible in terms of its composition, an extended screening can be facilitated without the need to set up a microarray production facility.

Development of a fibrinogen-specific sandwich enzyme-linked immunosorbent assay microarray assay for distinguishing between blood plasma and serum samples.

We have developed a fibrinogen-specific sandwich enzyme-linked immunosorbent assay (ELISA) microarray assay for use in qualitatively distinguishing between blood plasma and serum samples. Three capture antibodies (49D2, HPA001900, and F8512) were evaluated in conjunction with 1D6 as the detection antibody. The data show that 49D2 and (to a lesser extent) F8512 successfully identify previously unknown plasma and serum samples based on approximately a 28-fold difference in signal intensity between the sample types. This assay has utility in rapidly identifying previously archived clinical samples with incomplete annotation in a high-throughput manner prior to proteomic analyses.

In situ microarray fabrication and analysis using a microfluidic flow cell array integrated with surface plasmon resonance microscopy.

Surface Plasmon Resonance Microscopy (SPRM) is a promising label-free analytical tool for the real-time study of biomolecule interactions in a microarray format. However, flow cell design and microarray fabrication have hindered throughput and limited applications of SPRM. Here we report the integration of a microfluidic flow cell array (MFCA) with SPRM enabling in situ microarray fabrication and multichannel analysis of biomolecule probe-target interactions. We demonstrate the use of the MFCA for delivery of sample solutions with continuous flow in 24 channels in parallel for rapid microarray creation and binding analysis while using SPRM for real-time monitoring of these processes. Label-free measurement of antibody-antibody interactions demonstrates the capabilities of the integrated MFCA-SPRM system and establishes the first steps of the development of a high-throughput, label-free immunogenicity assay. After in situ probe antibody immobilization, target antibody binding was monitored in real time in 24 channels simultaneously. The limit of detection for this particular antibody pair is 80 ng/mL which is approximately 6 times lower than the industry recommended immunogenicity assay detection limit. The integrated MFCA-SPRM system is a powerful and versatile combination for a range of array-based analyses, including biomarker screening and drug discovery.

A direct immunoassay assessment of streptavidin- and N-hydroxysuccinimide-modified biochips in validation of serological TNFalpha responses in hemophagocytic lymphohistiocytosis.

The authors report 2 biochip platforms on gold manufactured by either nanoscale biotinylated self-assembled architectures to streptavidin surface or proteins containing free NH(2) groups to N-hydroxysuccinimide (NHS)-activated surfaces and investigated the potential application of tumor necrosis factor-alpha (TNFalpha) serodiagnosis of hemophagocytic lymphohistiocytosis (HLH). Interactions of TNFalpha antigen and TNFalpha antibody on the biochips were optimized using an indirect immunofluorescence method. Variation coefficients were 1.87% to 4.56% on the streptavidin biochip and 5.03% to 8.64% on the NHS biochip. The correlation coefficients (r) in TNFalpha and TNFalpha antibody assays in HLH patients between the 2 biochip formats were 0.9623 and 0.9386 and the concordance frequencies were 92.2% and 96.1%, respectively. To detect plasma TNFalpha-receptor complexes (TNFR1 and R2) in HLH, a biochip assay strategy was developed. Plasma levels of TNFalpha, TNFalpha antibody, and TNFalpha-receptor complexes (TNFR1 and R2) were detected in plasmas from 42 HLH cases using streptavidin biochips. Frequencies of the biomarkers in the plasmas were 40.5% (17/42) for TNFalpha, 30.9% (13/42) for TNFalpha antibody, 28.6% (12/42) for TNFalpha-receptor 1 complex, and 26.1% (11/42) for TNFalpha-receptor 2 complex, respectively. The streptavidin biochip format was more sensitive than the NHS surface and was demonstrated to be a valuable tool to identify individual biomarker molecules and molecular complexes in sera and cell lysates and to track therapeutic progress of patients.

Detection of H. pylori antibody profile in serum by protein array.

AIM: To detect multiple H. pylori antibodies in serum samples of individuals who carry H. pylori by protein array. METHODS: Recombinant H. pylori antigens, urease B subunit (UreB), vacuolating toxin A (VacA) and cytotoxin associated gene A protein (CagA), were prepared and immobilized in matrixes on nitrocellulose membrane by robotics to bind the specific immunoglobulin G (IgG) antibodies in serum. Staphylococcus protein A (SPA) labeled by colloid gold was used to integrate the immuno-complex and gave red color signal. The scanner based on charge-coupled device (CCD) could collect the image signal and convert it into digital signal. RESULTS: When human IgG was printed on the membrane in increasing concentrations and incubated with immunogold, a linear dose response curve was obtained and the detection limit for IgG was about 0.025 ng. The cutoff values, which were defined as the mean grey level plus 3 times of standard deviation, were 27.183, 28.546 and 27.402, for anti-UreB IgG, anti-CagA IgG and anti-VacA IgG, respectively, as 400 human serum samples with negative H. pylori antibodies were detected by the protein array. When 180 serum samples from patients in hospital were employed for detection of IgG against UreB, CagA and VacA, the sensitivity of the protein array was 93.4%, 95.4%, 96.0%, and the specificity was 94.8%, 94.4% and 97.5%, respectively, as compared with the results obtained by ELISA. The assay also showed high reproducibility, uniformity and stability, and the results were available within 30 min. CONCLUSION: The protein array is a very practical method for rapid detection of multiple antibodies in serum samples. It is especially useful for large scale epidemiological investigation of the infection of H. pylori.

A method for fabricating uni-dsDNA microarray chip for analyzing DNA-binding proteins.

This paper describes an approach for preparing unimolecular double-stranded DNA (uni-dsDNA) microarray chip. In this method, the various target oligonucleotides containing a reverse complementary sequence at 5' end were firstly annealed to a same universal oligonucleotide with amino group at 5' end and immobilized on aldehyde-derivatized glass slide. An on-chip DNA polymerization reaction was then performed to elongate the universal oligonucleotides. After a denaturation and a followed intra-strand annealing, a hairpin structure was formed at the free 3' end of the immobilized oligonucleotides. Finally, another on-chip DNA polymerization was done to synthesize the uni-dsDNA microarray. Combining with a PCR amplification of chemically synthesized target oligonucleotides, this method was much cost-effective for production of the uni-dsDNA microarray. The uni-dsDNA microarray was verified applicable for detecting the presence and monitoring the DNA-binding activity of the sequence-specific DNA-binding proteins.

Opportunities for nanotechnology-based innovation in tissue proteomics.

Within this review we discuss two methodologies used in tissue proteomics, namely mass-spectrometry (MS)-based protein pattern diagnostics and protein microarrays. Further, we describe current goals within the field of tissue proteomics and suggest points of departure for designing nanotechnology-based tools that will enhance the role of molecularly based diagnostics and therapeutics development in clinical medicine.

Protein microarrays in diagnosing IgE-mediated diseases: spotting allergy at the molecular level.

Over the last few decades, the prevalence of allergic diseases has increased dramatically in developed nations. The resulting worldwide burden on healthcare systems has provoked a whole series of research initiatives among allergy experts and commercial companies that aim to develop novel tests to improve the diagnostic risk assessment and early preventive treatment of disease. The advent of protein microarray technology has fueled aspirations of multianalyte immunological applications that permit the simultaneous analysis of huge numbers of disease-related parameters that will hopefully become amenable in the near future. Allergen microarrays have been developed for the monitoring of patient-specific antibody profiles to a previously unknown variety of allergens in a single analytical step. This review describes significant discoveries and developments in allergy research against a background of the increasing prevalence of disease and hence the emerging challenges for national healthcare systems. The development of novel protein microarray-based allergy diagnostic tests is portrayed in concert with the recent advances and benefits of this technology, along with the challenges that must be met by manufacturers in order to succeed with innovative allergen microarrays in a highly competitive market.

Protein profiling in respiratory disease: techniques and impact.

Multifactorial diseases such as respiratory disease call for a global analysis of such disorders. Recent advances in protein profiling techniques may allow for early diagnosis of respiratory disease, which is crucial for intervention and treatment. In order to reduce false-positive rates, clinical diagnosis requires a high degree of sensitivity and specificity to be an effective screening tool. Protein profiles identified by ProteinChip (Ciphergen Biosystems) technology coupled with mass spectrometry affords a global analysis of clinical samples and is beginning to reach acceptable levels of sensitivity and specificity. Combining the profile with another diagnostic tool enhances the effectiveness of protein profiles to classify disease. Although current efforts have centered on serum protein profiling, the local environment of the lung may be better reflected in proteins of bronchoalveolar lavage or sputum. Identification of biomarkers of disease by protein profiling analyses may lead to an understanding of the mechanisms of this disease and contribute to the discovery of new therapeutics for the prevention and treatment of disease. Advancing these analyses are techniques such as ProteinChip mass spectrometry, laser capture microdissection, tissue microarrays and fluorescently labeled antibody bead arrays, which enable the direct global analysis of complex mixtures. Effective high-throughput and ease of use of clinical testing will arrive with improvements in bioinformatics and decreases in instrumentation costs.

Biochips beyond DNA: technologies and applications.

Technological advances in miniaturization have found a niche in biology and signal the beginning of a new revolution. Most of the attention and advances have been made with DNA chips yet a lot of progress is being made in the use of other biomolecules and cells. A variety of reviews have covered only different aspects and technologies but leading to the shared terminology of "biochips." This review provides a basic introduction and an in-depth survey of the different technologies and applications involving the use of non-DNA molecules such as proteins and cells. The review focuses on microarrays and microfluidics, but also describes some cellular systems (studies involving patterning and sensor chips) and nanotechnology. The principles of each technology including parameters involved in biochip design and operation are outlined. A discussion of the different biological and biomedical applications illustrates the significance of biochips in biotechnology.

Quantitative assessment of factors affecting the sensitivity of a competitive immunomicroarray for pesticide detection.

Analytical protein microarrays offering highly parallel analysis can become an invaluable tool for a wide range of immunodiagnostic applications. Here we describe factors that influence the sensitivity of a competitive immunomicroarray that quantifies small molecules; in this case, the pesticides dichlobenil metabolite 2,6-dichlorobenzamide (BAM) and atrazine. Free pesticide concentrations in solution are quantified by the competitive binding of fluorescence-conjugated monoclonal antibodies to either surface-immobilized pesticide hapten-protein conjugates or pesticides in solution. We investigated the influence of antibody labeling techniques, microarray substrates, and spotting and incubation buffers. The results showed that microarrays immobilized on EasySpot or in-house fabricated agarose substrates printed with Genetix Amine Spotting Solution resulted in optimum results when the arrays were incubated with the sample/antibodies diluted in a Tris buffer supplemented with 0.05% each bovine serum albumin (BSA) and Tween 20. Furthermore, the application of directly labeled primary antibodies allowed for better sensitivity compared to secondary polyclonal antibody quantification.

The potential use of fiber optics for detection in microchip separation and miniaturized flow-cell systems.

This article evaluates the potential of using fiber optics as a detection tool during electrophoretic separations or identification and quantification of analytes in miniaturized systems, including microchips. This paper covers reports in the literature from 1989 to June 2002. The articles have been chosen based on various aspects of the instrumentation including the microchip substrates, channel size and geometry, pathlength, fiber and detector types, light source, separation conditions, detection limits, and applications-all with the goal of comparing and contrasting optical detections. This review has been divided into three groups: fluorescence measurement-based studies, absorbance measurement-based studies, and innovative studies in chronological order.