Implementation of a Non-Thermal Atmospheric Pressure Plasma for Eradication of Plant Pathogens from a Surface of Economically Important Seeds.

Plant pathogenic bacteria cause significant economic losses in the global food production sector. To secure an adequate amount of high-quality nutrition for the growing human population, novel approaches need to be undertaken to combat plant disease-causing agents. As the currently available methods to eliminate bacterial phytopathogens are scarce, we evaluated the effectiveness and mechanism of action of a non-thermal atmospheric pressure plasma (NTAPP). It was ignited from a dielectric barrier discharge (DBD) operation in a plasma pencil, and applied for the first time for eradication of Dickeya and Pectobacterium spp., inoculated either on glass spheres or mung bean seeds. Furthermore, the impact of the DBD exposure on mung bean seeds germination and seedlings growth was estimated. The observed bacterial inactivation rates exceeded 3.07 logs. The two-minute DBD exposure stimulated by 3-4% the germination rate of mung bean seeds and by 13.4% subsequent early growth of the seedlings. On the contrary, a detrimental action of the four-minute DBD subjection on seed germination and early growth of the sprouts was noted shortly after the treatment. However, this effect was no longer observed or reduced to 9.7% after the 96 h incubation period. Due to the application of optical emission spectrometry (OES), transmission electron microscopy (TEM), and confocal laser scanning microscopy (CLSM), we found that the generated reactive oxygen and nitrogen species (RONS), i.e., N2, N2+, NO, OH, NH, and O, probably led to the denaturation and aggregation of DNA, proteins, and ribosomes. Furthermore, the cellular membrane disrupted, leading to an outflow of the cytoplasm from the DBD-exposed cells. This study suggests the potential applicability of NTAPPs as eco-friendly and innovative plant protection methods.

In vitro assessment of the antimicrobial efficacy of chitosan nanoparticles against major fish pathogens and their cytotoxicity to fish cell lines.

Nanotechnology is an emerging avenue employed in disease prevention and treatment. This study evaluated the antimicrobial efficacy of chitosan nanoparticles (CSNPs) against major bacterial and oomycete fish pathogens in comparison with chitosan suspension. Initially, the minimum inhibitory concentrations (MIC, MIC90 ) were determined and the per cent inhibition of bacterial growth was calculated. Subsequently, the minimum bactericidal concentrations (MBCs) were determined. The time-dependent disruptions of CSNP-treated pathogens were observed via transmission electron microscopy (TEM), and the effect of CSNPs on the viability of two fish cell lines was assessed. No antimicrobial effect was observed with chitosan, while CSNPs (105 nm) exhibited a dose-dependent and species-specific antimicrobial properties. They were bactericidal against seven bacterial isolates recording MBC values from 1 to 7 mg/ml, bacteriostatic against four further isolates recording MIC values from 0.125 to 5 mg/ml and fungistatic against oomycetes recording MIC90 values of 3 and 4 mg/ml. TEM micrographs showed the attachment of CSNPs to the pathogenic cell membranes disrupting their integrity. No significant cytotoxicity was observed using 1 mg/ml CSNPs, while low dose-dependent cytotoxicity was elicited by the higher doses. Therefore, it is anticipated that CSNPs are able to compete and reduce using antibiotics in aquaculture.

Microbial assessment of pathogenic bacterial growth in ice cream and kulfa.

Current study was focused to examine the total bacterial count in packed and unpacked ice cream and kulfa collected from 12 different localities of Lahore. The bacterial colonies were isolated and grown on agar-broth media under sterilized conditions. Serial dilution technique was used to compose the replicates to get total viable count of bacteria. Results in case of packed ice cream samples indicated maximum (618 × 10-6 CFU/g) and minimum (79 × 10-6 CFU/g) bacterial count while in case of unpacked ice cream samples maximum and minimum bacterial count was 163 × 10-6 CFU/g and 71 × 10-6 CFU/g, respectively. Whereas in case of packed kulfa samples, maximum and minimum recorded bacterial count was 163 × 10-6 CFU/g and 72 × 10-6 CFU/g, respectively. The LM and SEM of the isolated bacteria were also performed for correct identification. Results indicated that the total bacterial count recorded in the samples exceeded the standard tolerable range which can lead to serious health damage of consumers.

Self-Propelled Micro/Nanomotors for Sensing and Environmental Remediation.

Self-propelled micro/nanomotors have gained attention for successful application in cargo delivery, therapeutic treatments, sensing, and environmental remediation. Unique characteristics such as high speed, motion control, selectivity, and functionability promote the application of micro/nanomotors in analytical sciences. Here, the recent advancements and main challenges regarding the application of self-propelled micro/nanomotors in sensing and environmental remediation are discussed. The current state of micro/nanomotors is reviewed, emphasizing the period of the last five years, then their developments into the future applications for enhanced sensing and efficient purification of water resources are extrapolated.

Microscopic Analysis and Quality Assessment of Induced Sputum From Children With Pneumonia in the PERCH Study.

BACKGROUND.: It is standard practice for laboratories to assess the cellular quality of expectorated sputum specimens to check that they originated from the lower respiratory tract. The presence of low numbers of squamous epithelial cells (SECs) and high numbers of polymorphonuclear (PMN) cells are regarded as indicative of a lower respiratory tract specimen. However, these quality ratings have never been evaluated for induced sputum specimens from children with suspected pneumonia. METHODS.: We evaluated induced sputum Gram stain smears and cultures from hospitalized children aged 1-59 months enrolled in a large study of community-acquired pneumonia. We hypothesized that a specimen representative of the lower respiratory tract will contain smaller quantities of oropharyngeal flora and be more likely to have a predominance of potential pathogens compared to a specimen containing mainly saliva. The prevalence of potential pathogens cultured from induced sputum specimens and quantity of oropharyngeal flora were compared for different quantities of SECs and PMNs. RESULTS.: Of 3772 induced sputum specimens, 2608 (69%) had <10 SECs per low-power field (LPF) and 2350 (62%) had >25 PMNs per LPF, measures traditionally associated with specimens from the lower respiratory tract in adults. Using isolation of low quantities of oropharyngeal flora and higher prevalence of potential pathogens as markers of higher quality, <10 SECs per LPF (but not >25 PMNs per LPF) was the microscopic variable most associated with high quality of induced sputum. CONCLUSIONS.: Quantity of SECs may be a useful quality measure of induced sputum from young children with pneumonia.

Nature-inspired antimicrobial polymers--assessment of their potential for biomedical applications.

We explored the potential of poly(oxonorbornene)-based synthetic mimics of antimicrobial peptides (SMAMPs), a promising new class of antimicrobial polymers with cell-selectivity and low resistance development potential, for clinical applications. We evaluated their antimicrobial activity against a panel of seven clinical and regulatory relevant bacteria strains, and tested their toxicity with two different kinds of primary human cells. For the antimicrobial activity, we performed the minimum inhibitory concentration (MIC) assay and determined the minimum bactericidal concentration (MBC) according to the NCCLS guidelines. The results revealed specific problems that may occur when testing the antimicrobial activity of amphiphilic cationic polymers, and confirmed the working hypothesis that the more hydrophilic SMAMP polymers in our portfolio were 'doubly selective', i.e. they are not only selective for bacteria over mammalian cells, but also for Gram-positive over Gram-negative bacteria. The data also showed that we could improve the broad-band activity of one SMAMP, and in combination with the results from the cell toxicity experiments, identified this polymer as a promising candidate for further in-vitro and in-vivo testing. Transmission electron studies revealed that the cellular envelopes of both E. coli and S. aureus were severely damaged due to SMAMP action on the bacterial membrane, which strengthened the argument that SMAMPs closely resemble antimicrobial peptides. To test cell toxicity, we used the traditional hemolysis assay with human red blood cells, and the novel xCelligence assay with primary human fibroblasts. The data reported here is the first example in which a hemolysis assay is benchmarked against the xCelligence assay. It revealed that the same trends were obtained using these complementary methods. This establishes the xCelligence assay with primary human cells as a useful tool for SMAMP characterization.

Biocides--resistance, cross-resistance mechanisms and assessment.

IMPORTANCE OF THE FIELD: Antibiotic resistance in bacterial pathogens has increased worldwide leading to treatment failures. Concerns have been raised about the use of biocides as a contributing factor to the risk of antimicrobial resistance (AMR) development. In vitro studies demonstrating increase in resistance have often been cited as evidence for increased risks. It is therefore important to understand the mechanisms of resistance employed by bacteria toward biocides used in consumer products and their potential to impart cross-resistance to therapeutic antibiotics. AREAS COVERED: In this review, the mechanisms of resistance and cross-resistance reported in the literature toward biocides commonly used in consumer products are summarized. The physiological and molecular techniques used in describing and examining these mechanisms are reviewed and application of these techniques for systematic assessment of biocides for their potential to develop resistance and/or cross-resistance is discussed. EXPERT OPINION: The guidelines in the usage of biocides in household or industrial purpose should be monitored and regulated to avoid the emergence of any MDR strains. The genetic and molecular methods to monitor the resistance development to biocides should be developed and included in preclinical and clinical studies.

Electron microscopy techniques to study bacterial adhesion.

Since its introduction 70 years ago electron microscopy has become an invaluable tool for microbiology and the study of bacterial interaction. Technological development over the past decades has enabled researchers to resolve smaller and smaller details in bacterial samples, while new preparation techniques like cryo preparation now allow to investigate bacteria even closer to their natural state. In this chapter we give a brief overview of electron microscopy techniques suitable for the investigation of bacterial adhesion at molecular as well as cellular level and a short outlook on future technologies relevant to the field.

Advanced imaging techniques for assessment of structure, composition and function in biofilm systems.

Scientific imaging represents an important and accepted research tool for the analysis and understanding of complex natural systems. Apart from traditional microscopic techniques such as light and electron microscopy, new advanced techniques have been established including laser scanning microscopy (LSM), magnetic resonance imaging (MRI) and scanning transmission X-ray microscopy (STXM). These new techniques allow in situ analysis of the structure, composition, processes and dynamics of microbial communities. The three techniques open up quantitative analytical imaging possibilities that were, until a few years ago, impossible. The microscopic techniques represent powerful tools for examination of mixed environmental microbial communities usually encountered in the form of aggregates and films. As a consequence, LSM, MRI and STXM are being used in order to study complex microbial biofilm systems. This mini review provides a short outline of the more recent applications with the intention to stimulate new research and imaging approaches in microbiology.

Automated quality assessment of autonomously acquired microscopic images of fluorescently stained bacteria.

Quality assessment of autonomously acquired microscopic images is an important issue in high-throughput imaging systems. For example, the presence of low quality images (>or=10%) in a dataset significantly influences the counting precision of fluorescently stained bacterial cells. We present an approach based on an artificial neural network (ANN) to assess the quality of such images. Spatially invariant estimators were extracted as ANN input data from subdivided images by low level image processing. Different ANN designs were compared and >400 ANNs were trained and tested on a set of 25,000 manually classified images. The optimal ANN featured a correct identification rate of 94% (3% false positives, 3% false negatives) and could process about 10 images per second. We compared its performance with the image quality assessment by different humans and discuss the difficulties in assigning images to the correct quality class. The computer program and the documented source code (VB.NET) are provided under General Public Licence.

Assessment of inhibitory effects of fluoride-coated tubes on biofilm formation by using the in vitro dental unit waterline biofilm model.

This study aimed to establish an in vitro model to simulate biofilms formed in dental unit waterlines (DUWLs) and to investigate the ability of polyvinylidene fluoride (PVDF)-coated tubes to inhibit biofilm formation using this model. The water and biofilm samples were obtained from DUWLs which had been clinically used for 2.5 years, and the predominant bacteria were identified. A conventional polyurethane tube was incubated for 24 to 96 h in the mixed flora of isolated bacteria, and the optimal incubation conditions to simulate a clinically formed biofilm were determined by observation with a scanning electron microscope. Biofilm formation on a PVDF-coated tube was observed using this in vitro model, and the adherence of different bacterial species to conventional and PVDF-coated tubes was assessed. Sphingomonas paucimobilis, Acinetobacter haemolytics, and Methylobacterium mesophilicum were predominantly isolated from contaminated DUWLs. Incubation of the polyurethane tube with the mixed flora containing these three species for 96 h resulted in the formation of a mature biofilm similar to the one clinically observed. The PVDF-coated tube was significantly less adhesive to all three bacterial species than the polyurethane tube (P < 0.05 by the Mann-Whitney U test), and the attachment of small amounts of rods was observed even after incubation with the mixed flora for 96 h. In conclusion, an in vitro biofilm model was obtained by using a mixed flora of bacteria isolated from DUWLs, and the PVDF-coated tube was found to be effective in preventing biofilm formation using this model.

Flow cytometric viability assessment and transmission electron microscopic morphological study of bacteria in glycerol.

Human cadaveric skin allografts are used in the treatment of burns and can be preserved in glycerol at high concentrations. Previously, glycerol has been attributed some antimicrobial effect. In an experimental set-up, we aimed at investigating this effect of prolonged incubation of bacteria in 85% glycerol. Staphylococcus epidermidis, Staphylococcus aureus, Pseudomonas aeruginosa, and Bacillus subtilis were incubated in 85% glycerol. The influence of duration of incubation and temperature on ultrastructure and viability were investigated. Unstressed cultures served as controls. Survival was studied after 24-36 h and 10 days incubation in 85% glycerol at 4 degrees C and 36 degrees C with transmission electron microscopy (TEM) and flow cytometry using viability stains indicating membrane damage (SYTO9, propidium iodide) or esterase activity (carboxyfluorescein diacetate). TEM clearly demonstrated variability in morphological changes of bacteria suggesting different mechanisms of damage. Viability stains supported these findings with faster declining viable cell populations in 85% glycerol at 36 degrees C compared with 4 degrees C. Both methods demonstrated that Gram-negative species were more susceptible than Gram-positive species. In conclusion, 85% glycerol may have some additional antimicrobial effect. Temperature is an important factor herein and Gram-negatives are most susceptible. The latter finding probably reflects the difference in cell wall composition between Gram-positive and Gram-negative bacteria.

Method for assessment of viability and morphological changes of bacteria in the early stage of colony formation on a simulated natural environment.

A quantitative analysis of changes in the physiological status of bacterial cells is a fundamental type of study in microbiological research. We devised a method for measuring the viability of bacteria in the early stage of colony formation on a simulated natural environment. In this method, a solid medium containing soil extract was used, and the formation of bacterial microcolonies on a membrane filter was determined by use of a laser scanning cytometer combined with live-dead fluorescent dyes. A polychlorinated biphenyl degrader, Comamonas testosteroni TK102, was used in this study. Surprisingly, approximately 20% of the microcolonies had their growth stopped and eventually died. In the presence of biphenyl, the growth arrest was increased to 50%, and filamentous cells were observed in the colonies. Predicted intermediate metabolites of biphenyl were added to the medium to determine the relationship between the change of viability and the production of metabolites, and the addition of 2,3-dihydroxybiphenyl showed low viability. The arrest was not observed to occur on nutrient-rich medium, suggesting that the change in viability might occur in a nutrient-poor natural condition. The results of this study demonstrated that toxic metabolites of xenobiotics might change cell viability in the natural environment.