Polychlorinated Biphenyls: A Review of Recent Updates on Food Safety and Environmental Monitoring, Health and Toxicological Implications, and Analysis.

A class of organic chemicals known as polychlorinated biphenyls (PCBs) consists of chlorine, hydrogen, and carbon atoms. High boiling points, chemical stability, non-flammability, and insulating properties have enabled them to be used in various industries. Because of their high toxicity, PCBs were one of the first industrial compounds to be banned from production. These compounds have high-fat solubility with bioaccumulation and biomagnification properties in the environment, food chain, and individuals. Hence, they may have an impact not only on individual organisms but ultimately on whole ecosystems. The main sources of PCB exposure are food and environmental pollutants. In the toxicology of PCBs, oxidative stress plays the most influential function. The induction of CYP1A1 due to the high affinity of PCBs for aryl hydrocarbon receptors is considered a trigger for oxidative stress. Production of reactive oxygen species and depletion of glutathione occur due to phase Ⅰ and Ⅱ metabolism, respectively. Thus, cellular redox balance may be disrupted in the presence of PCBs and their metabolites. Chronic and long-term exposure to these compounds can often lead to life-threatening diseases, like diabetes, obesity, cardiovascular and neurological diseases, cancer, and reproductive and endocrine disorders. We present the current knowledge of the routes of PCB exposure and bioaccumulation, the outlook regarding environmental and food safety, the potential role of PCBs in various diseases, the principal mechanisms responsible for PCB toxicity, and the main detection techniques used for PCBs.

Bioaccumulation of PCDD/Fs in foodstuffs near Bien Hoa and Da Nang airbases: assessment on sources and distribution.

In this survey, food items were collected from vicinities of Bien Hoa and Da Nang airbase and determined for polychloro-dibenzo-dioxins and polychloro-dibenzo-furans (PCDD/Fs) to assess their accumulation, distribution in the local food items, and risk of PCDD/F exposure through consumption of the local foods. Dioxin compounds were determined using isotope dilution method which is slightly modified from US-EPA method 1613B. The dioxin concentration was the highest in fish followed by eggs, chicken, meat (pork and beef), and vegetables. Particularly, in Bien Hoa airbase, the mean concentrations of dioxin on TEQ and lipid basis (except for vegetables) were 26 pg/g for fish, 13 pg/g for eggs, 20 pg/g for chicken, 4.5 pg/g for meat, and 0.34 pg/g fresh wt for vegetables. In Da Nang airbase, the mean levels of dioxin on TEQ and lipid basis were slightly lower, 12.9 pg/g for fish, 8.7 pg/g for eggs, 5.9 pg/g for chicken, 6.7 pg/g for meat, and 0.17 pg/g for vegetables. It has been interesting to observe that free-range chicken expose to higher level of dioxin than caged chicken. In some free-range chicken, the portion of 2,3,7,8-TCDD was relatively high and implying recent exposure to dioxin.

Marine microplastics bound dioxin-like chemicals: Model explanation and risk assessment.

Microplastics have become one of the most pervasive emerging pollutants in the marine environment because of their wide occurrence and high sorption ability for hydrophobic organic contaminants (HOCs). Among the associated HOCs, dioxin-like chemicals (DLCs) can pose severe health risks; however, information on effects of microplastics bound DLCs is lacking. To fill this knowledge gap, this study integrated chemical analysis and in vitro bioassays to elucidate the potential dioxin-like effects of microplastics bound DLCs. Chemical analysis results demonstrated that styrofoams possessed significantly greater DLCs than other coastal or open ocean plastic particles. This was probably due to the presence of additives and greater sorption ability of expanded polystyrene. However, styrofoams did not show as strong dioxin-like effects as predicted by the bioanalysis equivalent model in bioassays. This could be attributed to the decreased DLC bioavailability and increased competition with the presence of styrene oligomers. Besides, bioassay results also demonstrated that aging increased the associated DLC concentrations, since extra sorption from surrounding environment occurred during prolonged retention periods. Finally, it was estimated that the leaching of DLCs could induce dioxin-like effects in marine organisms under 100% (11/11) and 18% (2/11) scenarios for aged pellets and styrofoams through aqueous or dietary exposures.

Integrating data gap filling techniques: A case study predicting TEFs for neurotoxicity TEQs to facilitate the hazard assessment of polychlorinated biphenyls.

The application of toxic equivalency factors (TEFs) or toxic units to estimate toxic potencies for mixtures of chemicals which contribute to a biological effect through a common mechanism is one approach for filling data gaps. Toxic Equivalents (TEQ) have been used to express the toxicity of dioxin-like compounds (i.e., dioxins, furans, and dioxin-like polychlorinated biphenyls (PCBs)) in terms of the most toxic form of dioxin: 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD). This study sought to integrate two data gap filling techniques, quantitative structure-activity relationships (QSARs) and TEFs, to predict neurotoxicity TEQs for PCBs. Simon et al. (2007) previously derived neurotoxic equivalent (NEQ) values for a dataset of 87 PCB congeners, of which 83 congeners had experimental data. These data were taken from a set of four different studies measuring different effects related to neurotoxicity, each of which tested overlapping subsets of the 83 PCB congeners. The goals of the current study were to: (i) evaluate an alternative neurotoxic equivalent factor (NEF) derivations from an expanded dataset, relative to those derived by Simon et al. and (ii) develop QSAR models to provide NEF estimates for the large number of untested PCB congeners. The models used multiple linear regression, support vector regression, k-nearest neighbor and random forest algorithms within a 5-fold cross validation scheme and position-specific chlorine substitution patterns on the biphenyl scaffold as descriptors. Alternative NEF values were derived but the resulting QSAR models had relatively low predictivity (RMSE ∼0.24). This was mostly driven by the large uncertainties in the underlying data and NEF values. The derived NEFs and the QSAR predicted NEFs to fill data gaps should be applied with caution.

A Bayesian assessment of polychlorinated biphenyl contamination of fish communities in the Laurentian Great Lakes.

Polychlorinated biphenyl (PCB) contamination has historically posed constraints on the recreational and commercial fishing industry in the Great Lakes. Empirical evidence suggests that PCB contamination represents a greater health risk from fish consumption than other legacy contaminants. The present study attempts a rigorous assessment of the spatio-temporal PCB trends in multiple species across the Canadian waters of the Great Lakes. We applied a Bayesian modelling framework, whereby we initially used dynamic linear models to delineate PCB levels and rates of change, while accounting for the role of fish length and lipid content as covariates. We then implemented Bayesian hierarchical modelling to evaluate the temporal PCB trends during the dreissenid pre- and post-invasion periods, as well as the variability among and within the water bodies of the Great Lakes system. Our analysis indicates that Lake Ontario is characterized by the highest PCB levels among nearly all of the fish species examined. Historically contaminated local areas, designated as Areas of Concern, and embayments receiving riverine inputs displayed higher concentrations within each of the water bodies examined. The general temporal trend across the Great Lakes was that the high PCB concentrations during the early 1970s followed a declining trajectory throughout the late 1980s/early 1990s, likely as a result of the reductions in industrial emissions and other management actions. Nonetheless, after the late 1990s/early 2000s, our analysis provided evidence of a decline in the rate at which PCB concentrations in fish were dropping, accompanied by a gradual establishment of species-specific, steady-state concentrations, around which there is considerable year-to-year variability. The overall trends indicate that reduced contaminant emissions have brought about distinct beneficial changes in fish PCB concentrations, but past historical contamination along with other external or internal stressors (e.g., invasive species, climate change) continue to modulate the current levels, thereby posing potential risks to humans through fish consumption.

Polychlorinated Biphenyls in Surface Soil from North-East India: Implication for Sources Apportionment and Health-Risk Assessment.

Although India never manufactured polychlorinated biphenyls (PCBs), evidence suggests the prevalence of PCBs in multi-environmental matrices. Despite the high level of PCBs that has been detailed in the major urban areas of India, little is known about the fate and sources of PCBs in Northeast India (NEI). This motivated us to investigate the contamination level and sources of PCBs in the surface soil. In this study, the environmental concentration and sources of 25 PCBs were investigated in surface soil (n = 60) from three states of NEI (lower Assam, Manipur, and Tripura). Additionally, the relationship between soil organic carbon (SOC) and PCBs was studied to investigate the role of SOC in the distribution of PCBs. Overall, the concentration of ∑25PCBs ranged from 2950 to 16,700 pg/g dw (median 7080 pg/g dw), 3580-21,100 pg/g dw (median 11,500 pg/g dw), and 2040-11,000 pg/g dw (median 4270 pg/g dw) in Assam, Manipur, and Tripura, respectively. Low-chlorinated PCBs were more prevalent than highly chlorinated PCBs. PCB-49 was identified as the most abundant in soil, followed by PCB-52, and accounted for 13% and 12.9% of ∑25PCBs, respectively. With respect to land use categories, high ∑25PCBs were related to grassland areas and proximity to the roadside soil. The principal component analysis indicated emissions from technical PCB mixtures, combustion of municipal wastes/residential wood, incineration of hospital wastes, and e-waste recycling/disposal sites are the real sources of PCBs. Marginally, a moderate-to-weak correlation of SOC with ∑25PCBs (R2 = 0.144, p < 0.05) and their homologs (R2 = 0.280-0.365, p < 0.05) indicated the little role of SOC in the dispersion of PCBs. The estimated toxic equivalency of dioxin-like PCBs suggested that PCB-126 is the most toxic contaminant to endanger the human population.

An effective and low cost carbon based clean-up method for PCDD/Fs and PCBs analysis in food.

Sample preparation is of critical importance in dioxin analysis of food and feed samples. It is a complex procedure that includes lipid extraction followed by the application of chromatographic separation techniques, aiming in removing undesirable interferences from the matrix. The separation of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) from polychlorinated biphenyls (PCBs) is achieved by carbon-based materials which should have high fat capacity in order to be suitable for lipid-containing matrices. Automated methods are available but due to high cost and use of high amounts of solvents, manual methods are also applied. An active carbon material (Carbosphere) with high fat capacity that has been used in the past for manual methods is no longer commercially available. The present study assesses an alternative active carbon material, FU 4652, that can be used for the separation of PCDD/Fs and non-ortho PCBs. Mono-ortho and 6 non-dioxin-like PCBs are also analyzed. The method was validated according to the analytical criteria set in EU regulations 589/2014 and 709/2014. Control samples analyzed for the evaluation of the above material were olive oil reference samples spiked with PCDD/Fs and dioxin-like PCBs at two concentration levels. The new method was tested successfully on food samples of interlaboratory trials organized in previous years. Farmed fish samples collected within national surveillance programs for the years 2016-2017 were analyzed with the method developed. The results obtained indicate that the FU 4652 carbon sorbent has high fat capacity and is capable of separating congeners with good recoveries.

Monitoring OH-PCBs in PCB transport worker's urine as a non-invasive exposure assessment tool.

In this study, we analyzed hydroxylated polychlorinated biphenyls (OH-PCBs) in urine of both PCB transport workers and PCB researchers. A method to monitor OH-PCB in urine was developed. Urine was solid-phase extracted with 0.1% ammonia/ methanol (v/v) and glucuronic acid/sulfate conjugates and then decomposed using ß-glucuronidase/arylsulfatase. After alkaline digestion/derivatization, the concentration of OH-PCBs was determined by HRGC/HRMS-SIM. In the first sampling campaign, the worker's OH-PCB levels increased several fold after the PCB waste transportation work, indicating exposure to PCBs. The concentration of OH-PCBs in PCB transport workers' urine (0.55~11 µg/g creatinine (Cre)) was higher than in PCB researchers' urine (< 0.20 µg/g Cre). However, also a slight increase of OH-PCBs was observed in the researchers doing the air sampling at PCB storage area. In the second sampling, after recommended PCB exposure reduction measures had been enacted, the worker's PCB levels did not increase during handling of PCB equipment. This suggests that applied safety measures improved the situation. Hydroxylated trichlorobiphenyls (OH-TrCBs) were identified as a major homolog of OH-PCBs in urine. Also, hydroxylated tetrachlorobiphenyls (OH-TeCBs) to hydroxylated hexachlorobiphenyls (OH-HxCBs) were detected. For the sum of ten selected major indicators, a strong correlation to total OH-PCBs were found and these can possibly be used as non-invasive biomarkers of PCB exposure in workers managing PCB capacitors and transformer oils. We suggest that monitoring of OH-PCBs in PCB management projects could be considered a non-invasive way to detect exposure. It could also be used as a tool to assess and improve PCB management. This is highly relevant considering the fact that in the next 10 years, approx. 14 million tons of PCB waste need to be managed. Also, the selected populations could be screened to assess whether exposure at work, school, or home has taken place.

Assessment of hydrophobic organic contaminant availability in sediments after sorbent amendment and its complete removal.

Sorbents amended to sediments in situ for sequestration of hydrophobic organic contaminants (HOCs) may be swept away from the treated sites due to hydrodynamic forces applied to the sediment surface. The purpose of this study is to examine the possibility of recovery of HOC availability in sorbent-amended sediment after complete removal of the sorbent. Sediment contact with an easily separable model sorbent Tenax beads for 28 days in a slurry phase resulted in 74-98% reduction in polycyclic aromatic hydrocarbon and polychlorinated biphenyl availability compared to the untreated controls. HOC availability in the sorbent-treated sediment slightly increased by sorbent removal and after one month of mixing in a slurry phase because the slowly-desorbing HOC fraction was released and repartitioned back to the sediment, partially replenishing the rapidly-desorbing HOC fraction. However, HOC availability did not further increase during an extended mixing period of 12 months suggesting that the repartitioning process was not an infinite source. HOC availability after the 12-month post-treatment mixing for the sorbent-treated sediment was 53-97% lower than that of the untreated sediment because of the combined effect of HOC mass removal from sediment (with the sorbent) and incomplete recovery of available HOC fraction in the sorbent-treated sediment.

Human Health Risks Assessment Associated with Polychlorinated Biphenyls (PCBs) in Soil from Different Contaminated Areas of Mexico.

Recent studies have documented environmental contamination by PCBs in soil from different areas in Mexico (industrial, mining, and urban sites). However, the real significance of that soil contamination has not been established. Therefore, the aim of this study was to perform a human health risk assessment (Monte Carlos simulation) to evaluate the probable toxic effects of soils contaminated with PCBs on children in four sites in Mexico. A high non-carcinogenic risk (total nHQ = 1.1E+01; if nHQ ≥1, hazardous health effects cannot be ruled out) was found in Alpuyeca, Morelos, Mexico. Moreover, the total CR (cancer risk) found in Alpuyeca, Morelos is of concern (total CR = 5.1E-03), being that a cut-point of 1.0E-06 has been suggested as a safe level for cancer risk. Taking into consideration the data shown in this research, we conclude that a strategy to protect human health is necessary for the assessed sites.

Assessment of seasonal variations in persistent organic pollutants across the region of Tuscany using passive air samplers.

Concentrations of persistent organic pollutants (POPs) were measured for an entire year in the region of Tuscany, Italy. Passive air samplers consisting of polyurethane foam (PUF) disks were deployed over four sampling periods of 3-5 months from April 2008 to July 2009 in urban (n = 6) and rural (n = 4) sites. The aim of the study was to characterize the spatial and seasonal variations in selected POPs. The POP concentrations (pg m-3) in the air were dominated by dichlorodiphenyltrichloroethane and metabolites (DDTs) and polychlorinated biphenyls (∑7PCBs). DDTs, and ∑7PCBs showed a clear decreasing urban > rural gradient. The concentrations of DDTs and PCBs were up to 10 and 6 times higher, respectively, in urban sites than in rural sites. ∑7PCBs showed a significant correlation with the urbanized areas located <5 km around the sampling sites. For hexachlorocyclohexanes (HCHs), α-HCH concentrations were similar at both sampling sites and were found to be quite uniform during the four sampling periods. Seasonal fluctuations were observed for DDTs, and ∑7PCBs, with the highest concentrations observed during period 4 (summer-spring); this is most likely due to a temperature-driven re-emission from local sources. These findings were also supported by an air back trajectory analysis in the study area. This study contributes new information about POP levels in the Italian atmosphere and demonstrates the feasibility of using PUF disks to simultaneously assess seasonal concentrations at different sampling sites.

Polyurethane foam (PUF) disk passive samplers derived polychlorinated biphenyls (PCBs) concentrations in the ambient air of Bursa-Turkey: Spatial and temporal variations and health risk assessment.

Polyurethane foam (PUF) passive samplers were employed to assess air concentrations of polychlorinated biphenyls (PCBs) in background, agricultural, semi-urban, urban and industrial sites in Bursa, Turkey. Samplers were deployed for approximately 2-month periods from February to December 2014 in five sampling campaign. Results showed a clear rural-agricultural-semi-urban-urban-industrial PCBs concentration gradient. Considering all sampling periods, ambient air concentrations of Σ43PCBs ranged from 9.6 to 1240 pg/m3 at all sites with an average of 24.1 ± 8.2, 43.8 ± 24.4, 140 ± 190, 42.8 ± 24.6, 160 ± 280, 84.1 ± 105, 170 ± 150 and 280 ± 540 pg/m3 for Mount Uludag, Uludag University Campus, Camlica, Bursa Technical University Osmangazi Campus, Hamitler, Agakoy, Kestel Organised Industrial District and Demirtas Organised Industrial District sampling sites, respectively. The ambient air PCB concentrations increased along a gradient from background to industrial areas by a factor of 1.7-11.4. 4-Cl PCBs (31.50-81.60%) was the most dominant homologue group at all sampling sites followed by 3-Cl, 7-Cl, 6-Cl and 5-Cl homologue groups. Sampling locations and potential sources grouped in principal component analysis. Results of PCA plots highlighted a large variability of the PCB mixture in air, hence possible related sources, in Bursa area. Calculated inhalation risk levels in this study indicated no serious adverse health effects. This study is one of few efforts to characterize PCB composition in ambient air seasonally and spatially for urban and industrial areas of Turkey by using passive samplers as an alternative sampling method for concurrent monitoring at multiple sites.

Occurrence, distribution, and dechlorination of polychlorinated biphenyls and health risk assessment in Selangor River basin.

Polychlorinated biphenyls (PCBs) were monitored in surface water collected in the Selangor River basin, Malaysia, to identify the occurrence, distribution, and dechlorination process as well as to assess the potential adverse effects to the Malaysian population. Ten PCB homologs (i.e., mono-CBs to deca-CBs) were quantitated by using gas chromatography-mass spectrometry (GC/MS). The total concentration of PCBs in the 10 sampling sites ranged from limit of detection to 7.67 ng L-1. The higher chlorinated biphenyls (tetra-CBs to deca-CBs) were almost not detected in most of the sampling sites, whereas lower chlorinated biphenyls (mono-CBs, di-CBs, and tri-CBs) dominated more than 90 % of the 10 homologs in all the sampling sites. Therefore, the PCB load was estimated to be negligible during the sampling period because PCBs have an extremely long half-life. The PCBs, particularly higher chlorinated biphenyls, could be thoroughly dechlorinated to mono-CBs to tri-CBs by microbial decomposition in sediment or could still be accumulated in the sediment. The lower chlorinated biphenyls, however, could be resuspended or desorbed from the sediment because they have faster desorption rates and higher solubility, compared to the higher chlorinated biphenyls. The health risk for the Malaysia population by PCB intake that was estimated from the local fish consumption (7.2 ng kg-1 bw day-1) and tap water consumption (1.5 × 10-3-3.1 × 10-3 ng kg-1 bw day-1) based on the detected PCB levels in the surface water was considered to be minimal. The hazard quotient based on the tolerable daily intake (20 ng kg-1 bw day-1) was estimated at 0.36.

Mechanisms of Action Point Towards Combined PBDE/NDL-PCB Risk Assessment.

At present, human risk assessment of the structurally similar non-dioxin-like (NDL) PCBs and polybrominated diphenylethers (PBDEs) is done independently for both groups of compounds. There are however obvious similarities between NDL-PCBs and PBDEs with regard to modulation of the intracellular calcium homeostasis (basal calcium levels, voltage-gated calcium channels, calcium uptake, ryanodine receptor) and thyroid hormone (TH) homeostasis (TH levels and transport). which are mechanisms of action related to neurobehavioral effects (spontaneous activity, habituation and learning ability). There also similarities in agonistic interactions with the hepatic nuclear receptors PXR and CAR. Several effects on developmental (reproductive) processes have also been observed, but results were more dispersed and insufficient to compare both groups of compounds. The available mechanistic information is sufficient to warrant a dose addition model for NDL-PCBs and PBDEs, including their hydroxylated metabolites.Although many of the observed effects are similar from a qualitative point of view for both groups, congener or tissue specific differences have also been found. As this is a source of uncertainty in the combined hazard and risk assessment of these compounds, molecular entities involved in the observed mechanisms and adverse outcomes associated with these compounds need to be identified. The systematical generation of (quantitative) structure-activity information for NDL-PCBs and PBDEs on these targets (including potential non-additive effects) will allow a more realistic risk estimation associated with combined exposure to both groups of compounds during early life. Additional validation studies are needed to quantify these uncertainties for risk assessment of NDL-PCBs and PBDEs.

Temporal trends in the levels of metals, PCDD/Fs and PCBs in the vicinity of a municipal solid waste incinerator. Preliminary assessment of human health risks.

The concentrations of PCDD/Fs, PCBs, and metals were determined in soil and air samples collected near a municipal solid waste incinerator (MSWI) located in Mataró (Catalonia, Spain), being the health risks for the population living in the vicinity of the facility subsequently assessed. We also established the temporal trends with respect to previous surveys performed in the same zone. In general terms, the highest environmental levels of the pollutants were found in the city of Mataró and were independent on the distance to the MSWI. Soil levels of metals did not show temporal variations between the current and previous campaigns. However, the concentrations of metals in air samples collected in 2011 and 2013, were lower than those found in our 2008 survey. Regarding PCDD/Fs and PCBs, no differences were noted between the levels of the current survey and those corresponding to 2008. Anyhow, the concentrations of metals, PCDD/Fs, and PCBs in soils and air did not exceed the reference values established by regulatory organizations, being also in the low range of other similar studies recently reported. Finally, the human non-carcinogenic and carcinogenic risks due to exposure to metals, PCDD/Fs, and PCBs, were, for the population living in the neighborhood of the MSWI, considered as acceptable according to international standards.

Impacts of PCB analytical interpretation uncertainties on dechlorination assessment and remedial decisions.

Laboratory analyses of polychlorinated biphenyls (PCBs) often do not quantitate the 209 individual PCB congeners, thereby requiring analyst interpretation to determine individual congener concentrations. Error introduced during this interpretation is subsequently propagated to calculated surrogate variables, such as the number of chlorines per biphenyl (CPB), and the molar dechlorination product ratio (MDPR), which are used to assess the extent of dechlorination and inform remedial decisions. The present work applies a Monte Carlo (MC) analysis to assess current methods for quantitating co-eluting congeners and the errors that could occur in individual congeners and derived CPB and MDPR estimates. Synthetic chromatograms, which were created using two alternative methods (random assignment and assignment based on relative proportions in Aroclors) for assigning mass to co-eluting congeners, were compared to their fully-quantitated counterparts. The percent error introduced in total PCB (∑PCB) concentration ranges from approximately -60% to +50%. Similarly, the errors associated with CPB and MDPR estimates range from approximately -20% to +20% and -120% to +30%, respectively. Uncertainties introduced during congener analysis and propagated to surrogate variables can thus be substantial, and should be considered in assessments of the extent of dechlorination and associated remedial decisions.

Characterization and risk assessment of polychlorinated biphenyls in soils and rice tissues in a suburban paddy field of the Pearl River Delta, South China.

We investigated the concentration and composition of polychlorinated biphenyls (PCBs) in paddy soils and rice tissues and the associated potential health risks in the urban agricultural areas of the Pearl River Delta (PRD), South China. The results indicated that highly chlorinated PCBs were more prominent in soil when the concentrations of low-molecular-weight PCBs were relatively high in rice plants. There was a trend of decreasing PCB concentrations with soil depth and a significant correlation between PCBs and the total organic carbon or total nitrogen concentration in section soils. The PCB concentrations followed the order of root > leaf > stem > grain. Although the dioxin toxicity equivalency values and estimated daily intake levels (based direct and indirect consumption) were lower than in other seriously contaminated regions, there is still a need to monitor PCB pollution in urban agriculture because of the PCB emissions from capacitor storage following the rapid urbanization experienced in the PRD.

Assessment of the polychlorinated biphenyls (PCBs) levels in soil samples near an electric capacitor manufacturing industry in Morelos, Mexico.

In Mexico, polychlorinated biphenyls (PCBs) were principally used as heat transfer chemicals in electric transformers and capacitors as well as hydraulic fluids and lubricants in heavy electrical equipment since the early 1940s. However, although PCBs have been banned in Mexico, their past and present improper disposal has resulted in environmental contamination. Therefore, the aim of this study was to evaluate the PCBs levels in soil samples in the immediate area of an electric capacitor manufacturing industry, which was established several years ago in Alpuyeca, Morelos, Mexico. To confirm the presence of PCBs, surface soil samples (1-5 cm in depth) were collected from the vicinity of the industry. We determined the concentrations of 40 PCB congeners in soil samples using gas chromatography/mass spectrometry. The total PCBs levels in the soil samples ranged from 6.2 to 108460.6 µg kg(-1). Moreover, when we analyzed the results of the congeners (non-dioxin-like PCBs and dioxin-like PCBs), the levels of non-dioxin-like PCB congeners ranged from 5.7 to 103469 µg kg(-1) and the levels of dioxin-like PCB congeners ranged from 0.5 to 4992 µg kg(-1). Considering that soil is an important pathway of exposure in humans, analysis of PCBs levels in blood (as a biomarker of exposure) is necessary in individuals living in Alpuyeca, Morelos.

Uptake and depuration of PCB-153 in edible shrimp Palaemonetes varians and human health risk assessment.

A medium-term mesocosm exposure study was conducted to elucidate bioaccumulation and depuration of polychlorinated biphenyl congener 153 (PCB-153) in edible shrimp Palaemonetes varians. Over the 15-day exposure period, shrimp under different exposure concentrations exhibited a significant increase in PCB-153 concentration compared with control organisms. Distinct bioaccumulation patterns and uptake rates were observed depending on the exposure concentrations. For low PCB-153 exposure levels (0.25µgL(-1)), accumulation followed a saturation model, reaching an apparent steady state after fifteen days exposure. For intermediate (2.5µgL(-1)) and high PCB-153 levels (25µgL(-1)), accumulation was faster and linear. In addition, the bioaccumulation rate was not proportional to PCB-153 concentration, and the bioaccumulation was higher at intermediate exposure concentrations. Regarding the depuration phase, P. varians lost up to 30% of PCB-153 after 72h and levels continued slowly to decrease until the end of the 30-d experimental period. However, PCB-153 levels in shrimp did not reach background values, and those exposed to moderate and high PCB-153 concentrations presented contamination levels much higher than the regulatory limit for human food consumption (75ngg(-1) ww for Σ6 PCB).

Assessment and optimization of an ultrasound-assisted washing process using organic solvents for polychlorinated biphenyl-contaminated soil.

The goal of this work was to evaluate a washing process that uses organic solutions for polychlorinated biphenyl (PCB)-contaminated soil, and includes an ultrasound pre-treatment step to reduce operational times and organic solvent losses. In a preliminary trial, the suitability of 10 washing solutions of different polarities were tested, from which three n-hexane-based solutions were selected for further evaluation. A second set of experiments was designed using a three-level Taguchi L27 orthogonal array to model the desorption processes of seven different PCB congeners in terms of the variability of their PCB concentration levels, polarity of the washing solution, sonication time, the ratio washing solution/soil, number of extraction steps and total washing time. Linear models were developed for the desorption processes of all congeners. These models provide a good fit with the results obtained. Moreover, statistically significant outcomes were achieved from the analysis of variance tests carried out. It was determined that sonication time and ratio of washing solution/soil were the most influential process parameters. For this reason they were studied in a third set of experiments, constructed as a full factorial design. The process was eventually optimized, achieving desorption rates of more than 90% for all congeners, thus obtaining concentrations lower than 5 ppb in all cases. The use of an ultrasound-assisted soil washing process for PCB-contaminated soils that uses organic solvents seems therefore to be a viable option, especially with the incorporation of an extra step in the sonication process relating to temperature control, which is intended to prevent the loss of the lighter congeners.