Rapid and Low-Cost Quantification of Adulteration Content in Camellia Oil Utilizing UV-Vis-NIR Spectroscopy Combined with Feature Selection Methods.

This study aims to explore the potential use of low-cost ultraviolet-visible-near infrared (UV-Vis-NIR) spectroscopy to quantify adulteration content of soybean, rapeseed, corn and peanut oils in Camellia oil. To attain this aim, test oil samples were firstly prepared with different adulterant ratios ranging from 1% to 90% at varying intervals, and their spectra were collected by an in-house built experimental platform. Next, the spectra were preprocessed using Savitzky-Golay (SG)-Continuous Wavelet Transform (CWT) and the feature wavelengths were extracted using four different algorithms. Finally, Support Vector Regression (SVR) and Random Forest (RF) models were developed to rapidly predict adulteration content. The results indicated that SG-CWT with decomposition scale of 25 and the Iterative Variable Subset Optimization (IVSO) algorithm can effectively improve the accuracy of the models. Furthermore, the SVR model performed best for predicting adulteration of camellia oil with soybean oil, while the RF models were optimal for camellia oil adulterated with rapeseed, corn, or peanut oil. Additionally, we verified the models' robustness by examining the correlation between the absorbance and adulteration content at certain feature wavelengths screened by IVSO. This study demonstrates the feasibility of using low-cost UV-Vis-NIR spectroscopy for the authentication of Camellia oil.

Assessment of rapeseed oil body (oleosome) lipolytic activity as an effective predictor of emulsion purity and stability.

The lipolytic activity in oil body creams as affected by recovery and washing protocols was investigated. The effect of thermal treatment on the hydrolytic activity and physical stability of fresh and aged (up to 30 days) oil body emulsions was studied. The use of alkaline pH solutions (9.5) to soak and grind rapeseeds were more effective reducing the contamination of oil body material from seed proteins/enzymes, compared with neutral pHs. Soaking and grinding seeds with a NaHCO3 solution (0.1 M, pH 9.5) yielded oil bodies with a similar composition to those prepared in urea (9 M); however, the physical stability over storage was compromised due to the presence of hydrolytic enzymes. Heating a dispersion of oil bodies for 6 mins at 95 °C did not alter the physical properties of oil bodies and significantly reduced lipolytic activity (>90% enzyme inactivation), resulting in a stable emulsion.

Biofuel production from straw hydrolysates: current achievements and perspectives.

Straw is an agricultural residue of the production of e.g. cereals, rapeseed or sunflowers. It includes dried stalks, leaves, and empty ears and corncobs, which are separated from the grains during harvest. Straw is a promising lignocellulosic feedstock with a beneficial greenhouse gas balance for the production of biofuels and chemicals. Like all lignocellulosic materials, straw is recalcitrant and requires thermochemical and enzymatic pretreatment to enable access to the three major biopolymers of straw-the polysaccharides cellulose and hemicellulose and the polyaromatic compound lignin. Straw is used for commercial ethanol and biogas production. Considerable research has also been conducted to produce biobutanol, biodiesel and biochemicals from this raw material, but more research is required to establish them on a commercial scale. The major hindrance for launching industrial biofuel and chemicals' production from straw is the high cost necessitated by pretreatment of the material. Improvements of microbial strains, production and extraction technologies, as well as co-production of high-value compounds represent ways of establishing straw as feedstock for the production of biofuels, chemicals and food.

[Impacts of one-off fertilization on nitrogen leaching and economic benefits for rice-rape rotation system]. / 一次性施肥技术对水稻-æ²¹èœè½®ä½œç³»ç»Ÿæ°®ç´ æ·‹å¤±ç‰¹å¾åŠç»æµŽæ•ˆç›Šçš„å½±å“.

One-off fertilization is a new technology of one-time applying base fertilizer near the rhizosphere during whole crop cultivation period. It has the advantages of simplifying fertilization manage-ment and reducing labor costs, but its impacts on environment, such as leaching characteristics need further analysis. We set five treatments in the typical rice-rape rotation system in the middle and lower reaches of the Yangtze River, including control treatment (CK), farmers' practice treatment (FP), optimal fertilizer treatment (OPT), one-off application of urea fertilizer treatment (UA) and one-off application of controlled release urea treatment (CRF). Using in situ leaching monitoring method, nitrogen (N) leaching characteristics at 90 cm depth of soil in rice-rape rotation system under different treatments were obtained, the impacts of one-off fertilization on N lea-ching were evaluated and its economic benefits were comprehensively analyzed. The results showed that the main forms of N in leachate were different for rape and rice. In the rape season, NO3--N was the major component of leachate, while for rice season NO3--N and NH4+-N were equally important. In the whole rotation period, the inorganic N leaching mainly occurred in the rice season, and compared with FP, OPT and UA, the total amount of inorganic N leached by CRF were significantly reduced by 33.7%, 20.8%, and 20.7%, respectively. However, the effects of different fertilization treatments on N leaching in rape season were not significantly different. Under the same N application rates, compared with OPT, UA ensured the stable yield of rape and rice and significantly increased the NAE in rape season by 15.1%, but failed to improve the NAE in rice season. There was no significant difference between OPT and CRF in rice yield and NAE, but rape yield and NAE of CRF significantly increased by 10.7% and 18.9%, respectively. From the economic front, compared with OPT, UA and CRFincreased rapeseed income by 3660 and 3048 yuan·hm-2, and rice income by 3162 and 2220 yuan·hm-2. Therefore, considering the effects of various fertilizer treatments on N leaching, crop yield, and economic benefits, one-off base fertilization application of controlled release fertilizer technology could ensure stable or increase crop yields, and improve farmers' income, while significantly reduce the inorganic N leaching loss. Such technology is recommended for future rice-rape rotation cultivation.

Ecological and economic benefits of planting winter rapeseed (Brassica rapa L.) in the wind erosion area of northern China.

Winter and early spring wind soil erosion have considerable impacts on ecosystems, human well-being and agricultural production in the low precipitation zones of northern China. Little is known about the impact of growing winter rapeseed on ecological cropping systems and the associated economic benefits in the wind erosion area. To explore the winter rapeseed cover effect, we conducted a field experiment in which we covered the soil with winter rapeseed, winter wheat and wheat stubble at different plant density levels and used the spring bare ground as the control (CK). The effects of wind erosion, the "winter rapeseed + " multiple cropping system, and the economic benefits were compared. There was a large difference in the dry matter, the maximum water absorption, the maximum water storage, the soil evaporation and total wind erosion, the amount of sediment transported in the stratum and the wind erosion modulus. Among them, the mean wind erosion modulus of spring sowing bare land was as high as 490.9 kg·hm-2·h-1, which was 7 and 13 times that of winter wheat and winter rapeseed, respectively. As the wind speed increased from 14 to 22 m·s-1, from a small density to a large density, the mean wind erosion modulus decreased from 68 to 17 kg·hm-2·h-1 for winter rapeseed, and 150 to 31 kg·hm-2·h-1 for winter wheat. Total wind-erosion of sediment transport of CK was 18.6 g·m-2 min-1, which was 16 and 31 times the mean value of winter wheat and winter rapeseed, respectively. "Winter rapeseed + " replanting peanuts, potatoes, rice, seed melons and other crops generally increased the production value by 5-74% compared with wheat and corn intercropping, which was 98-255% higher than the traditional wheat single crop. Our results suggested that the suitable area for planting winter rapeseed in northern China was approximately 3.3 × 106 hm2, and in terms of the best economic and ecological effects, the appropriate density was 5 × 105 plants·hm-2 in northern China. Our results indicated that Chinese winter rapeseed was the best choice for preventing wind erosion and improving ecological and economic benefits in winter and spring in northern China; additionally, winter rapeseed has important impacts on agricultural sustainability in semi-arid and arid climates.

Sequencing batch biosorption of micropollutants from aqueous effluents by rapeseed waste: Experimental assessment and statistical modelling.

Rapeseed (RS) waste was used for sequential biosorption from aqueous solutions of two target micropollutants: lead ions and Reactive blue 19 (Rb19) dye, through an integrated approach, combining experimental assessment and statistical modeling. In both cases of sequential biosorption, a pseudo-second order kinetic model fitted the biosorption data well. Intraparticle diffusion proved to be the rate-limiting step in the sequential retention of both micropollutants. A selective desorption of metal ions and anionic dye at pH 2.5 and 10.5, respectively was observed. The quadratic models generated by response surface methodology (RSM) adequately described the sequential biosorption process and the desorption process, respectively. XPS and FTIR analysis indicated the mechanisms involved in the retention of target pollutants.

Comparative analysis of the genetic variability within the Q-type C2H2 zinc-finger transcription factors in the economically important cabbage, canola and Chinese cabbage genomes.

BACKGROUND: Brassica oleracea, B. rapa and B. napus encompass many economically important vegetable and oil crops; such as cabbage, broccoli, canola and Chinese cabbage. The genome sequencing of these species allows for gene discovery with an eye towards discerning the natural variability available for future breeding. The Q-type C2H2 zinc-finger protein (ZFP) transcription factors contain zinc finger motifs with a conserved QALGGH as part of the motif and they may play a critical role in the plants response to stress. While they may contain from one to five ZF domains (ZFD) this work focuses on the ZFPs that contain two zinc-fingers, which bind to the promoter of genes, and negatively regulate transcription via the EAR motif. B. oleracea and rapa are diploid and evolved into distinct species about 3.7 million years ago. B. napus is polyploid and formed by fusion of the diploids about 7500 years ago. RESULTS: This work identifies a total of 146 Q-type C2H2-ZFPs with 37 in B. oleracea, 35 in B. rapa and 74 in B. napus. The level of sequence similarity and arrangement of these genes on their chromosomes have mostly remained intact in B. napus, when compared to the chromosomes inherited from either B. rapa or oleracea. In contrast, the difference between the protein sequences of the orthologs of B. rapa and oleracea is greater and their organization on the chromosomes is much more divergent. In general, the 146 proteins are highly conserved especially within the known motifs. Differences within subgroups of ZFPs were identified. Considering that B. napus has twice the number of these proteins in its genome, RNA-Seq data was mined and the expression of 68 of the 74 genes was confirmed. CONCLUSION: Alignment of these proteins gives a snapshot of the variability that may be available naturally in Brassica species. The aim is to study how different ZFPs bind different genes or how dissimilar EAR motifs alter the negative regulation of the genes bound to the ZFP. Results from such studies could be used to enhance tolerance in future Brassica breeding programs.

Hazard assessment of the veterinary pharmaceuticals monensin and nicarbazin using a soil test battery.

Veterinary pharmaceuticals are widely used as food additives in the poultry industry, and the unknown consequences of releasing these compounds into the environment are of concern. The purpose of the present study was to determine the direct impact of 2 veterinary pharmaceuticals (nicarbazin and monensin), commonly used in the poultry industry, on nontarget invertebrates and plant species. Ecotoxicological tests were used to evaluate the acute and chronic toxicity in earthworms (Eisenia andrei), collembolans (Folsomia candida), and 2 plant species (Brassica rapa and Triticum aestivum). Chemical analytical measurements were in good agreement with the nominal concentrations used, although some variability was seen. The results obtained showed no effects of nicarbazin at the highest nominal tested concentration of 1000 mg a.i./kg soil dry weight on any of the organisms, whereas exposure to monensin caused a concentration-specific response pattern. Species sensitivity to monensin decreased in the following rank order: B. rapa > T. aestivum > E. andrei > F. candida, with measured median effect concentrations (based on soil exposure) ranging between approximately 10 and 120 mg/kg. Our results emphasize the importance of using a test battery when assessing ecotoxicological effects by using different ecophysiological endpoints and species from different trophic levels. Environ Toxicol Chem 2018;37:3145-3153. © 2018 SETAC.

Metal accumulation in Raphanus sativus and Brassica rapa: an assessment of potential health risk for inhabitants in Punjab, Pakistan.

Pakistan is an agricultural country and due to the shortage of clean water, most of the irrigated area (32,500 ha) of Pakistan was supplied with wastewater (0.876 × 109 m3/year). Concentrations of heavy metals in radish (Raphanus sativus) and turnip (Brassica rapa) taken from vegetable fields in Sargodha, Pakistan, were measured. Untreated wastewater was used persistently for a long time to irrigate these vegetable fields. A control site was selected that had a history of fresh groundwater irrigation. Mean metal concentrations were found for irrigation water, soil, and vegetables. In irrigation water, concentrations of Mo and Pb at three sites and Se at sites II and III were higher than the recommended limits. In vegetables, concentrations of Mo and Pb were above the maximum permissible limits. High bioconcentration factor was observed for Zn (12.61 in R. sativus and 11.72 in B. rapa) at site I and high pollution load index was found for Pb (3.89 in R. sativus and 3.87 in B. rapa) at site II. The differences in metal concentrations found in samples depended upon different soil nature and assimilation capacities of vegetables at different sites which in turn depended upon different environmental cues. The entrance of metal and metalloids to human body may happen through different pathways; however, the food chain is the chief route through which metals are transferred from vegetables to individuals. Health risk index observed for metals, (Mo, As, Ni, Cu, and Pb) higher than 1 indicated high risk through consumption of these vegetables at three sites.

Assessment of veterinary drugs in plants using pharmacokinetic approaches: The absorption, distribution and elimination of tetracycline and sulfamethoxazole in ephemeral vegetables.

The present study was carried out to demonstrate novel use of pharmacokinetic approaches to characterize drug behaviors/movements in the vegetables with implications to food safety. The absorption, distribution, metabolism and most importantly, the elimination of tetracycline (TC) and sulfamethoxazole (SMX) in edible plants Brassica rapa chinensis and Ipomoea aquatica grown hydroponically were demonstrated and studied using non-compartmental pharmacokinetic analysis. The results revealed drug-dependent and vegetable-dependent pharmacokinetic differences and indicated that ephemeral vegetables could have high capacity accumulating antibiotics (up to 160 µg g-1 for TC and 38 µg g-1 for SMX) within hours. TC concentration in the root (Cmax) could reach 11 times higher than that in the cultivation fluid and 3-28 times higher than the petioles/stems. Based on the volume of distribution (Vss), SMX was 3-6 times more extensively distributed than TC. Both antibiotics showed evident, albeit slow elimination phase with elimination half-lives ranging from 22 to 88 hours. For the first time drug elimination through the roots of a plant was demonstrated, and by viewing the root as a central compartment and continuous infusion without a loading dose as drug administration mode, it is possible to pharmacokinetically monitor the movement of antibiotics and their fate in the vegetables with more detailed information not previously available. Phyto-pharmacokinetic could be a new area worth developing new models for the assessment of veterinary drugs in edible plants.

Extraction and Quantification of Sinapinic Acid from Irish Rapeseed Meal and Assessment of Angiotensin-I Converting Enzyme (ACE-I) Inhibitory Activity.

Phenolic compounds, including phenolic acids, are known to play a protective role against the development of cardiovascular disease. The aim of this work was to generate a phenolic acid extract from Irish rapeseed meal, to determine the quantity of sinapinic acid (SA) in this fraction and to assess the ability of this fraction to inhibit the enzyme angiotensin-I converting enzyme (ACE-I; EC 3.4.15.1). A crude phenolic extract (fraction 1), free phenolic acid containing extract (fraction 2), and an extract containing phenolic acids liberated from esters (fraction 3) were generated from Irish rapeseed meal using a methanol:acetone:water solvent mixture (7:7:6). The total phenolic content (TPC) of each extract was determined and proximate analysis performed to determine the fat, moisture, and protein content of these extracts. Nuclear magnetic resonance (1H NMR) spectroscopy was used to quantify the level of SA in extract 3, which inhibited ACE-I by 91% ± 0.08 when assayed at a concentration of 1 mg/mL, compared to the control, captopril, which inhibited ACE by 97% ± 0.01 when assayed at a concentration of 1 mg/mL.

Plant Growth Environments with Programmable Relative Humidity and Homogeneous Nutrient Availability.

We describe the design, characterization, and use of "programmable", sterile growth environments for individual (or small sets of) plants. The specific relative humidities and nutrient availability experienced by the plant is established (RH between 15% and 95%; nutrient concentration as desired) during the setup of the growth environment, which takes about 5 minutes and <1$ in disposable cost. These systems maintain these environmental parameters constant for at least 14 days with minimal intervention (one minute every two days). The design is composed entirely of off-the-shelf components (e.g., LEGO® bricks) and is characterized by (i) a separation of root and shoot environment (which is physiologically relevant and facilitates imposing specific conditions on the root system, e.g., darkness), (ii) the development of the root system on a flat surface, where the root enjoys constant contact with nutrient solution and air, (iii) a compatibility with root phenotyping. We demonstrate phenotyping by characterizing root systems of Brassica rapa plants growing in different relative humidities (55%, 75%, and 95%). While most phenotypes were found to be sensitive to these environmental changes, a phenotype tightly associated with root system topology-the size distribution of the areas encircled by roots-appeared to be remarkably and counterintuitively insensitive to humidity changes. These setups combine many of the advantages of hydroponics conditions (e.g., root phenotyping, complete control over nutrient composition, scalability) and soil conditions (e.g., aeration of roots, shading of roots), while being comparable in cost and setup time to Magenta® boxes.

Assessment of protein quality of soybean meal and 00-rapeseed meal toasted in the presence of lignosulfonate by amino acid digestibility in growing pigs and Maillard reaction products.

An experiment was conducted to determine protein quality in processed protein sources using the content of AA, -methylisourea (OMIU)-reactive Lys, Maillard reaction products (MRP), and cross-link products; the standardized ileal digestibility (SID) of CP and AA; and growth performance in growing pigs as criteria. Differences in protein quality were created by secondary toasting (at 95°C for 30 min) of soybean meal (SBM) and rapeseed meal (RSM) in the presence of lignosulfonate resulting in processed SBM (pSBM) and processed RSM (pRSM). The processing treatment was used as a model for overprocessed protein sources. Ten growing pigs were each fed 1 of the 4 diets containing SBM, pSBM, RSM, or pRSM in each of 3 periods. Ileal chyme was collected at the end of each period and analyzed for CP, AA, and OMIU-reactive Lys. Diets were analyzed for furosine and carboxymethyllysine (CML) as an indicator for MRP and lysinoalanine (LAL), which is a cross-link product. The SBM and RSM diets contained furosine, CML, and LAL, indicating that the Maillard reaction and cross-linking had taken place in SBM and RSM, presumably during the oil extraction/desolventizing process. The amounts of furosine, CML, and LAL were elevated in pSBM and pRSM due to further processing. Processing resulted in a reduction in total and OMIU-reactive Lys contents and a decrease in G:F from 0.52 to 0.42 for SBM and 0.46 to 0.39 for RSM ( = 0.006), SID of CP from 83.9 to 71.6% for SBM and 74.9 to 64.6% for RSM ( < 0.001), and SID of AA ( < 0.001), with the largest effects for total and OMIU-reactive Lys. The effects of processing could be substantial and should be taken into account when using processed protein sources in diets for growing pigs. The extent of protein damage may be assessed by additional analyses of MRP and cross-link products.

Global income and production impacts of using GM crop technology 1996-2014.

This paper provides an economic assessment of the value of using genetically modified (GM) crop technology in agriculture at the farm level. It follows and updates earlier annual studies which examined economic impacts on yields, key costs of production, direct farm income and effects, and impacts on the production base of the 4 main crops of soybeans, corn, cotton and canola. The commercialisation of GM crops has continued to occur at a rapid rate since the mid 1990s, with important changes in both the overall level of adoption and impact occurring in 2014. This annual updated analysis shows that there continues to be very significant net economic benefits at the farm level amounting to $17.7 billion in 2014 and $150.3 billion for the 19-year period 1996-2014 (in nominal terms). These economic gains have been divided roughly 50% each to farmers in developed and developing countries. About 65% of the gains have derived from yield and production gains with the remaining 35% coming from cost savings. The technology has also made important contributions to increasing global production levels of the 4 main crops, having, for example, added 158 million tonnes and 322 million tonnes respectively, to the global production of soybeans and maize since the introduction of the technology in the mid 1990s.

Synergy between bio-based industry and the feed industry through biorefinery.

Processing biomass into multi-functional components can contribute to the increasing demand for raw materials for feed and bio-based non-food products. This contribution aims to demonstrate synergy between the bio-based industry and the feed industry through biorefinery of currently used feed ingredients. Illustrating the biorefinery concept, rapeseed was selected as a low priced feed ingredient based on market prices versus crude protein, crude fat and apparent ileal digestible lysine content. In addition it is already used as an alternative protein source in diets and can be cultivated in European climate zones. Furthermore, inclusion level of rapeseed meal in pig diet is limited because of its nutritionally active factors. A conceptual process was developed to improve rapeseeds nutritional value and producing other bio-based building blocks simultaneously. Based on the correlation between market prices of feed ingredients and its protein and fat content, the value of refined products was estimated. Finally, a sensitivity analysis, under two profit scenario, shows that the process is economically feasible. This study demonstrates that using biorefinery processes on feed ingredients can improve feed quality. In conjunction, it produces building blocks for a bio-based industry and creates synergy between bio-based and feed industry for more efficient use of biomass. © 2015 Society of Chemical Industry.

Characterization of the Key Odorants in Commercial Cold-Pressed Oils from Unpeeled and Peeled Rapeseeds by the Sensomics Approach.

By application of aroma extract dilution analysis (AEDA) on the volatile fraction isolated from commercial cold-pressed rapeseed oil prepared from unpeeled seeds, 35 odor-active constituents in the flavor dilution (FD) factor range of 8-8192 were detected. The identification experiments showed that the earthy, pea-like-smelling 2-isopropyl-3-methoxypyrazine showed the highest FD factor of 8192, followed by 1-octene-3-one (FD 4096) and (E,Z)-2,6-nonadienal with an FD of 2048. After quantitation of the 16 key odorants showing FD factors ≥32 by stable isotope dilution assays and a determination of their odor thresholds in deodorized sunflower oil, odor activity values (OAV; ratio of concentration to odor threshold) could be calculated. The results indicated 2-isopropyl-3-methoxypyrazine, (E,E)-2,4-nonadienal (deep-fried, fatty), and (E,Z)-2,6-nonadienal (cucumber-like) with the highest OAVs. To confirm that the key aroma compounds were correctly identified and quantitated, a recombination experiment was performed by mixing the reference odorants in the same concentrations as they occurred in the rapeseed oil using odorless sunflower oil as the matrix. The recombinate showed a very good agreement with the overall aroma of the oil. In a commercial rapeseed oil prepared from peeled seeds, the same odorants were identified; however, in particular, the FD factor of dimethyl sulfide (DMS) was clearly higher. Quantitation of DMS in 10 commercial rapeseed oils from either peeled and unpeeled seeds revealed significant differences in DMS, but no influence of the peeling process on the amounts of DMS was found. The data can serve as a basis for the quality assessment of cold-pressed rapeseed oil.

Physiological biosafety assessment of genetically modified canola on weed (Avena sativa).

The present study was carried out for the assessment of physiological biosafety and effects of genetically modified (GM) canola on Avena sativa, which is a common weed plant of South Asia. Methanolic extracts of GM and non-GM canola were assessed on seed germination and growth of A. sativa under sterilized conditions. The extracts were treated with 3%, 5%, and 10% concentrations of methanol. Results showed that the extract of GM canola increases the number of roots and root fresh weight. However, root length was significantly decreased. Similarly, a significant rate of increase was observed in shoot fresh weight and shoot length of A. sativa by treatment of GM canola. Emergence percentage, germination index, and emergence rate index show a significant effect of decrease when treated with GM canola.

Genetic dissection of heterosis using epistatic association mapping in a partial NCII mating design.

Heterosis refers to the phenomenon in which an F1 hybrid exhibits enhanced growth or agronomic performance. However, previous theoretical studies on heterosis have been based on bi-parental segregating populations instead of F1 hybrids. To understand the genetic basis of heterosis, here we used a subset of F1 hybrids, named a partial North Carolina II design, to perform association mapping for dependent variables: original trait value, general combining ability (GCA), specific combining ability (SCA) and mid-parental heterosis (MPH). Our models jointly fitted all the additive, dominance and epistatic effects. The analyses resulted in several important findings: 1) Main components are additive and additive-by-additive effects for GCA and dominance-related effects for SCA and MPH, and additive-by-dominant effect for MPH was partly identified as additive effect; 2) the ranking of factors affecting heterosis was dominance > dominance-by-dominance > over-dominance > complete dominance; and 3) increasing the proportion of F1 hybrids in the population could significantly increase the power to detect dominance-related effects, and slightly reduce the power to detect additive and additive-by-additive effects. Analyses of cotton and rapeseed datasets showed that more additive-by-additive QTL were detected from GCA than from trait phenotype, and fewer QTL were from MPH than from other dependent variables.

Ecological Risk Assessment of a Metal-Contaminated Area in the Tropics. Tier II: Detailed Assessment.

This study presents data on the detailed evaluation (tier 2) of a site-specific ecological risk assessment (ssERA) in a former smelter area contaminated with metals (Santo Amaro, Bahia, Brazil). Combining information from three lines of evidence (LoE), chemical (ChemLoE), ecotoxicological (EcotoxLoE) and ecological (EcoLoE), in the Triad approach, integrated risk values were calculated to rank sites and confirm the potential risk disclosed with tier 1. Risk values were calculated for the habitat and for the retention functions in each sampling point. Habitat function included the ChemLoE calculated from total metal concentrations. The EcotoxLoE was based on reproduction tests with terrestrial invertebrates (Folsomia candida, Enchytraeus crypticus, Eisenia andrei), shoot length and plant biomass (Avena sativa, Brassica rapa). For the EcoLoE, ecological parameters (microbial parameters, soil invertebrate community, litter breakdown) were used to derive risk values. Retention function included the ChemLoE, calculated from extractable metal concentrations, and the EcotoxLoE based on eluate tests with aquatic organisms (Daphnia magna reproduction and Pseudokirchneriella subcapitata growth). Results related to the habitat function indicated that the metal residues are sufficient to cause risk to biota, while the low metal levels in extracts and the general lack of toxicity in aquatic tests indicated a high soil retention capacity in most sampling points. Integrated risk of tier 2 showed the same trend of tier 1, suggesting the need to proceed with remediation actions. The high risk levels were related to direct toxicity to organisms and indirect effects, such as failure in the establishment of vegetation and the consequent loss of habitat quality for microorganisms and soil fauna. This study shed some light on the selection of tools for the tier 2 of an ssERA in tropical metal-contaminated sites, focusing on ecological receptors at risk and using available chemical methods, ecological surveys and ecotoxicity tests.

Evidence for pollinator cost and farming benefits of neonicotinoid seed coatings on oilseed rape.

Chronic exposure to neonicotinoid insecticides has been linked to reduced survival of pollinating insects at both the individual and colony level, but so far only experimentally. Analyses of large-scale datasets to investigate the real-world links between the use of neonicotinoids and pollinator mortality are lacking. Moreover, the impacts of neonicotinoid seed coatings in reducing subsequent applications of foliar insecticide sprays and increasing crop yield are not known, despite the supposed benefits of this practice driving widespread use. Here, we combine large-scale pesticide usage and yield observations from oilseed rape with those detailing honey bee colony losses over an 11 year period, and reveal a correlation between honey bee colony losses and national-scale imidacloprid (a neonicotinoid) usage patterns across England and Wales. We also provide the first evidence that farmers who use neonicotinoid seed coatings reduce the number of subsequent applications of foliar insecticide sprays and may derive an economic return. Our results inform the societal discussion on the pollinator costs and farming benefits of prophylactic neonicotinoid usage on a mass flowering crop.