Safety assessment of poly(N-vinylcaprolactam) as a potential drug carrier in extenders for boar sperm cryopreservation.

Polymers may be used to deliver compounds in freezing extenders to minimize injuries in spermatozoa during cryopreservation, although their activity and toxicity for boar sperm are unknown. This study investigated the effects of the polymer (N-vinylcaprolactam) (PNVCL), when included in extenders for boar sperm cryopreservation. In Experiment 1, sperm was exposed to PNVCL at: 0 (control); 39.1; 78.1; 156.3; and 312.5 µg/mL. Spermatozoa structure, kinetics and biochemical functions were unaltered in contact with PNVCL at 38 °C (P > .05) but declined with prolonged exposure (10, 60 and 120 min) in all treatments (P > .05). In Experiment 2, after inclusion of PNVCL in the freezing extender at the same concentrations, post-thawing sperm quality did not differ compared to the control (P > .05). Lipid peroxidation and the production of reactive oxygen species were the only parameters of sperm quality that were unaffected in both experiments, even after contact with PNVCL for 120 min (P > .05). As no negative effects were observed in post-thawing boar sperm quality, PNVCL did not incur in cytotoxicity and may be a potential carrier for antioxidants in freezing extenders.

In vitro assessment of electrospun polyamide-6 scaffolds for esophageal tissue engineering.

Artificial tissue-engineered grafts offer a potential alternative to autologous tissue grafts for patients, which can be traumatic. After decellularizing Papio hamadryas esophagus and studying the morphology and physical properties of the extracellular matrix (ECM), we generated electrospun polyamide-6 based scaffolds to mimic it. The scaffolds supported a greater mechanical load than the native ECM and demonstrated similar 3D microstructure, with randomly aligned fibers, 90% porosity, 29 µm maximal pore size, and average fiber diameter of 2.87 ± 0.95 µm. Biocompatibility studies showed that human adipose- and bone marrow-derived mesenchymal stromal cells (AD-MSC and BMD-MSC) adhered to the scaffold surface and showed some proliferation: scaffold cell coverage was 25% after 72 h of incubation when seeded with 1000 cells/mm2 ; cells elongated processes along the polyamide-6, although they flattened 1.67-4 times less than on cell culture plastic. Human umbilical vein endothelial cells, however, showed poor adherence and proliferation. We thus provide in vitro evidence that polyamide-6 scaffolds approximating the esophageal biomechanics and 3D topography of nonhuman primates may provide a biocompatible substrate for both AD-MSC and BMD-MSCs, supporting their adhesion and survival to some degree. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 107B: 253-268, 2019.

Production of dodecanedioic acid via biotransformation of low cost plant-oil derivatives using Candida tropicalis.

Dodecanedioic acid (DDA) is highly useful to the chemical industry as a versatile precursor for producing the polyamide nylon-6,12, which is used for many technical applications, such as heat and chemical-resistant sheaths. However, DDA synthesis has several drawbacks, such as high energy input and cost-intensive removal of by-products. Therefore, alternative bio-based production routes are required due to increasing industrial demand for green chemicals and renewable products. Candida tropicalis converts petrochemical-based n-dodecanes to the corresponding dicarboxylic acids by targeted functionalization. To increase sustainability of the DDA production process, we tested dodecanoic acid methyl ester, which can be easily obtained from transesterification of coconut oil, in whole-cell biotransformation by C. tropicalis. By modifying selected process parameters, a final DDA concentration of 66 g/L was achieved using a highly reliable, small-scale bioreactor system. Crucial process development included a gradual pH shift, an optimized substrate feeding strategy, and monitoring the transcriptional profile.

Brush head composition, wear profile, and cleaning efficacy: an assessment of three electric brush heads using in vitro methods.

OBJECTIVE: The objective of this research was to evaluate a current store brand (SB) brush head for composition/physical characteristics, Wear Index (WI), and cleaning efficacy versus the previous SB brush head refill design (SB control) and the Oral-B Precision Clean brush head (positive control, PC). METHODS: This research consisted of three parts: 1) Analytical analysis using Fourier Transform Infrared (FT-IR) spectrometry to evaluate the chemical composition of the current SB brush head bristles relative to the SB control. In addition, physical parameters such as bristle count and diameter were determined. 2) Wear Index (WI) investigation to determine the Wear Index scores of in vitro-aged brush heads at four weeks (one month) and 13 weeks (three months) by a trained investigator. To "age" the brush heads, a robot system was used as a new alternative in vitro method to simulate aging by consumer use. 3) Robot testing to determine the cleaning performance of in vitro-aged brush heads, comparing one month-aged current SB brush heads with the SB control (one and three months-aged) and the PC brush heads (three months-aged) in a standardized fashion. RESULTS: 1) FT-IR analysis revealed that the chemical composition of the current and control SB refill brush heads is identical. In terms of physical parameters, the current SB brush head has 12% more bristles and a slightly oval brush head compared to the round brush head of the SB control. 2) Wear Index analysis showed there was no difference in the one month-aged current SB brush head versus the one month-aged SB control (1.67 vs. 1.50, p = 0.65) or versus the three months-aged PC brush head (1.67 vs. 1.50, p = 0.65). The one month-aged current SB brush head demonstrated statistically significantly less wear than the three months-aged SB control (1.67 vs. 2.67, p = 0.01). 3) Analysis of cleaning efficacy shows that the one month-aged current SB brush head had improved cleaning performance over the one month-aged SB control brush head (p < 0.05), despite no statistically significant difference in wear. Both the one month-aged current and control SB brush heads showed statistically significantly lower cleaning performance compared to the three months-aged PC brush heads (p < 0.01). CONCLUSION: While the current SB brush head showed improved cleaning over the SB control, it demonstrated significantly lower durability and cleaning in comparison to the PC brush head. Dental professionals should be aware of these differences, both in durability and in cleaning performance, when recommending brush heads to their patients.

Cloth media filtration and membrane microfiltration: serial operation.

A combined system comprised of a cloth media filter and a membrane microfilter operated in series was used to treat secondary effluent. The study objective was to investigate the effect of premembrane filtration on the maximum sustainable membrane flux, transmembrane pressure, and effluent quality. The maximum sustainable time-averaged flux under predefined operating conditions (i.e., 15-minute process cycle, 24-hour chemical cleaning cycle, and 30-day intensive cleaning cycle) was 127 L/m(2)x h. Typical flux rates for secondary effluent ranged from 40 to 55 L/m(2) x h. Effluent water quality from the combined system was high and independent of membrane flux and influent quality. Average membrane effluent water quality values were 0.04 NTU for turbidity and 1.4 mg/L for 5-day biochemical oxygen demand. Neither total nor fecal coliforms were detected. Based on the results presented herein, prefiltration would provide an annualized cost savings of approximately 12% over microfiltration alone for a 3.8 x 10(3) m(3)/d treatment facility.