Does exposure to workplace hazards cluster by occupational or sociodemographic characteristics? An analysis of foreign-born workers in Australia.

BACKGROUND: Disparities in exposure to occupational hazards may be linked to social position as well as the type of job a person holds. This study aimed to describe the prevalence of exposure to workplace hazards among three migrant worker groups and to assess whether social disparities in exposure for these groups remain after adjusting for occupational characteristics. METHODS: Data were collected in 2017/2018 from 1630 Australian workers born in New Zealand, India, and the Philippines. Weighted estimated prevalence of exposure to 10 carcinogens and four psychosocial hazards (discrimination, job strain, vulnerability, and insecurity) was calculated for sociodemographics and occupation. Regression estimated the likelihood of exposure by sociodemographics after adjustment for occupational characteristics. RESULTS: Exposure to workplace hazards ranged from 11.7% (discrimination) to 61.2% (exposed to at least one carcinogen). Compared with workers born in India, New Zealand born workers were over twice as likely to be exposed to diesel engine exhaust (adjusted odds ratio [aOR] = 2.60) and 60% more likely to be exposed to at least one carcinogen (aOR = 1.60) but less likely to be exposed to any psychosocial hazard. Social disparities by country of birth, sex, age, education, and number of years in Australia, as well as company size, employment type, and hours, worked remained associated with greater likelihood of reporting one or more workplace hazards after adjusting for occupational characteristics. CONCLUSION: Examining sociodemographic as well as occupational characteristics helps to clarify groups most likely to be exposed to workplace hazards who can be hidden when examining occupational characteristics alone.

An approach to estimating the environmental burden of cancer from known and probable carcinogens: application to Ontario, Canada.

BACKGROUND: Quantifying the potential cancer cases associated with environmental carcinogen exposure can help inform efforts to improve population health. This study developed an approach to estimate the environmental burden of cancer and applied it to Ontario, Canada. The purpose was to identify environmental carcinogens with the greatest impact on cancer burden to support evidence-based decision making. METHODS: We conducted a probabilistic assessment of the environmental burden of cancer in Ontario. We selected 23 carcinogens that we defined as "environmental" (e.g., pollutants) and were relevant to the province, based on select classifications provided by the International Agency for Research on Cancer. We evaluated population exposure to the carcinogens through inhalation of indoor/outdoor air; ingestion of food, water, and dust; and exposure to radiation. We obtained or calculated concentration-response functions relating carcinogen exposure and the risk of developing cancer. Using both human health risk assessment and population attributable fraction models in a Monte Carlo simulation, we estimated the annual cancer cases associated with each environmental carcinogen, reporting the simulation summary (e.g., mean and percentiles). RESULTS: We estimated between 3540 and 6510 annual cancer cases attributable to exposure to 23 environmental carcinogens in Ontario. Three carcinogens were responsible for over 90% of the environmental burden of cancer: solar ultraviolet (UV) radiation, radon in homes, and fine particulate matter (PM2.5) in outdoor air. Eight other carcinogens had an estimated mean burden of at least 10 annual cancer cases: acrylamide, arsenic, asbestos, chromium, diesel engine exhaust particulate matter, dioxins, formaldehyde, and second-hand smoke. The remaining 12 carcinogens had an estimated mean burden of less than 10 annual cancer cases in Ontario. CONCLUSIONS: We found the environmental burden of cancer in Ontario to fall between previously estimated burdens of alcohol and tobacco use. These results allow for a comparative assessment across carcinogens and offer insights into strategies to reduce the environmental burden of cancer. Our analysis could be adopted by other jurisdictions and repeated in the future for Ontario to track progress in reducing cancer burden, assess newly classified environmental carcinogens, and identify top burden contributors.

Integration of cancer and non-cancer human health risk assessment for Aniline enriched groundwater: a fuzzy inference system-based approach.

This study outlines a methodological approach to evaluate the environmental risk from integrating data of Aniline in groundwater near to coal-based industries using fuzzy logic, and a comprehensive artificial intelligence approach and the results were validated using conventional risk assessment approach. The Aniline is well-known carcinogenic pollutant released from coal-based industries, so to understand the associated cancer and non-cancer risks (CR and NCR), 15 groundwater samples were analyzed for Aniline, whose concentration was found within the range 0.10-0.34 mg/L, which is up to 68 times higher than the permissible limit. The alkaline pH of water samples resulted in reduced attractive forces between the soil particles with Aniline, and thereby increased percolation of Aniline into the groundwater. Women were at least risk in terms of Mamdani cancer risk (MCR) and Mamdani hazard index (MHI) which was observed up to 1.04E-04 and 3.04, respectively, while maximum MCR and MHI were observed in case of children, i.e., 1.21-E04 and 3.26, respectively. The newly proposed fuzzy inference rule-based Mamdani combined index (MCI) depicts the combined effect of both CR and NCR and was found to be highly correlated with each other. The detailed comparison analysis exhibited that the fuzzy inference rule-based MCI has better resolving ability to find out priority risk prediction over conventional methods under efficient parameter uncertainty control. Hence, it can be concluded that the fuzzy analyses can reflect human considerations and expertise in indices, empowering them to manage nonlinear, questionable, uncertain and subjective data. Therefore, this tool can predict the more meaningful risk estimation of any pollutants on human health.

Distribution characteristics and health risk assessment of volatile organic compounds in the groundwater of Lanzhou City, China.

Volatile organic compounds (VOCs) typically exist in the aqueous environment due to global anthropogenic activities. The distribution and contaminated profile (or characteristics) of VOCs in the groundwater of Lanzhou, China, were investigated in this study. Groundwater samples were collected from 30 sampling points in December 2015, and a total of 17 VOCs were analyzed by purge and trap gas chromatography-mass spectrometry. Thirteen types of VOCs were detected at 29 sampling points in the study area. Of these, dichloromethane and toluene, which were found at 22 sampling points, had the highest detection frequency (73.3%), followed by benzene (66.7%), 1,2-dichloroethane (50%), and xylenes (50%). The highest average concentration among the detected VOCs was found for chloroform (5151.5 µg/L). The spatial distribution of VOC contamination in four major urban areas of Lanzhou and the variation in VOC concentration caused by land use transitions were also analyzed. The results showed that Xigu district was the most polluted area in Lanzhou, mainly due to land use for industrial proposes. On the contrary, the samples for Anning district showed lower VOC concentrations because of better groundwater quality, which is associated with the absence of manufacturing industries in this region. The health risk assessment model developed by the United States Environmental Protection Agency was employed in this study to evaluate safety for drinking water use. This study found that despite considering the volatilization of VOCs from water due to heating, six sampling points (G05 in Qilihe district; G07 and G09 in Xigu district; G16, G17, and G15 in Chengguan district) showed non-carcinogenic risks, ranging from 1.63 to 14.2, while three points (G16 in Chengguan district, and G10 and G07 in Xigu district) exhibited high carcinogenic risks for human health, ranging from 2.94 × 10-4 to 6.85 × 10-4. Trichloroethylene, tetrachloroethylene, and 1,2-dichloroethylene were identified as the dominant VOCs, presenting high non-carcinogenic risk. 1,2-dichloroethane and vinyl chloride were the primary factors for high carcinogenic risk. The high-risk areas were concentrated in Xigu and Chengguan districts, suggesting the need to alert the relevant local government departments.

Sources and a Health Risk Assessment of Potentially Toxic Elements in Dust at Children's Playgrounds with Artificial Surfaces: A Case Study in Belgrade.

The focus of this research on children's playgrounds with artificial surfaces aimed to establish levels of potentially toxic elements (PTEs) in dust, their origin, and impact on children at 15 playgrounds: 9 on school grounds and 6 on day nurseries in Belgrade (Serbia). Soil samples were taken from the immediate vicinity of the playgrounds to establish the origin of PTEs in the dust samples. Soil analyses revealed the lithogenic origin of Co, Cr, Ni, Fe, Mn, As, Cd, Cu, Pb, and Zn and the anthropogenic origin of As, Cd, Cu, Pb, and Zn. However, in the dust samples, the origin of the elements was different with As, Co, Fe, and Mn originating from the surrounding soil; Cr and Ni levels affected by both atmospheric deposition and the surrounding soil; Cd, Pb, and Zn concentrations impacted by atmospheric deposition; and Cu levels affected by factors of a local character. No noncancer risk was found for any of the individual elements investigated, nor for any of the playgrounds being studied, while a minimal cancer risk was found from As with values greater than 1E-6 at almost all the sites. Based on the results obtained for the spatial distribution of individual PTE levels, it was determined that the surrounding soil and atmospheric deposition have an almost equal impact on noncancer risk values.

Contamination impact and human health risk assessment of heavy metals in surface soils from selected major mining areas in Ghana.

Analysis of soil samples around pristine and major gold-mining areas in Ghana was carried out for heavy metals as part of a larger soil contamination and metal background study. The surface soil samples were digested using microwave digester (aqua regia) and analyzed with ICP-MS for As, Cd, Hg, Zn, Co, Cu, Mn, Fe, Al, V, Cr, and Pb. The average concentrations (mg/L) for the metals ranged from 0.01 ± 0.01 (Cd) to 86,859.36 ± 47.07 (Fe) for the pristine sites, and 0.01 ± 0.01 (Cd) to 59,006.95 ± 79.06 (Fe) for the mining sites. Mercury was below the detection limit of the analytical instrument (0.029). The concentrations of heavy metals from this study were used to assess their contamination levels, and health risks. The results showed that, the metals ranked by severity of health risks as As > Pb > Cr > Cd. Principal component analysis (PCA) and cluster analysis showed two groupings with the PCA showing metals variability explained by 79.02%. Results from the PCA and Cluster analysis indicate anthropogenic sources of the metals which may be emanating from gold-mining activities. Results from multi-criteria ranking and pattern recognition employing PROMETHEE and GAIA revealed major contribution of the metals from the mining sites with metal variability explained by 72.83%. This is the first time a multi-criteria approach is employed to characterize heavy metal contamination in Ghana, and the study nevertheless brought to light the impact of mining on human health and the environment with implications for other mineral areas around the globe.

Cancer risk assessment for occupational exposure to chromium and nickel in welding fumes from pipeline construction, pressure container manufacturing, and shipyard building in Taiwan.

OBJECTIVE: We assessed the cancer risks resulting from the exposure to chromium, hexavalent chromium (Cr (VI) ), oxidic nickel (Ni), and soluble Ni in welding fumes during pipeline and shipyard construction and pressure container manufacturing in Taiwan. We also determined the roles of welding performance and demographic characteristics during the exposure to Cr and Ni. METHODS: Personal air samples were collected for the analysis of Cr and Ni, and the concentrations of Cr (VI), oxidic Ni, and soluble Ni were quantified. We assessed cancer slope factors for Cr, Cr (VI), oxidic Ni, and soluble Ni, and we used the Incremental Lifetime Cancer Risk model proposed by the United States Environmental Protection Agency to calculate excess risk. RESULTS: The risks of exposure to Cr and Cr (VI) in welding fumes exceeded the acceptable level of occupational exposure (10-3). We ranked the excess cancer risk in three industries in decreasing order as follows: pipeline construction, shipyard construction, and pressure container manufacturing. The most sensitive parameters for the risk assessment were Cr and Ni concentrations. Statistically significant determinants of Cr (VI), oxidic Ni, and soluble Ni concentrations were the following: stainless steel as the base metal and the filler metals of shielded metal arc welding (SMAW) and of gas tungsten arc welding (GTAW). CONCLUSION: The study revealed that welders belong to a high cancer-risk group. Furthermore, we demonstrated the roles of filler metals and stainless steel in exposure to Cr and Ni.

Dioxin-like polychlorinated biphenyls in marine fish from Shandong, China, and human dietary exposure.

The occurrence and human dietary exposure of 12 dioxin-like polychlorinated biphenyls (DL-PCBs) in 41 marine fish samples from Shandong Province of China were investigated. The DL-PCB congeners were extracted using automated Soxhlet extraction, purified via a composite column clean-up procedure and analysed by gas chromatography-triple quadrupole mass spectrometry. DL-PCB congeners were found in all analysed samples, with a mean concentration of 0.887 ng/g ww (wet weight). The TEQ concentrations of DL-PCBs in individual fish samples ranged from 0.011 to 9.214 pg WHO TEQ/g ww. The mean dietary intake for all fish species was 36.5 pg TEQ/kg bw/month, which was lower than the provisional tolerable monthly intake of 70 pg TEQ/kg bw/month set by the Joint FAO/WHO Expert Committee on Food Additives. To monitor the trend of DL-PCBs in fish for food safety control, it is necessary to maintain a surveillance programme.

Occurrence and risk assessment of mycotoxins, acrylamide, and furan in Latvian beer.

This work reports data on the occurrence of nine mycotoxins and two food processing contaminants - acrylamide and furan - in a total of 100 beers produced in Latvia. Mycotoxins were detected by high-performance liquid chromatography (HPLC) coupled with time-of-flight mass spectrometry, acrylamide by HPLC coupled with quadrupole-Orbitrap mass spectrometry, and furan by headspace gas chromatography-mass spectrometry. The most frequently occurring mycotoxins were HT-2 and deoxynivalenol (DON), which were detected in 52% and 51% of the analysed samples. The highest content was observed for DON, reaching the maximum of 248 µg kg-1. Furan was ubiquitous, and 74% of the samples contained acrylamide. In terms of the estimated exposure, the biggest potential risk was identified for HT-2 representing more than 11% of tolerable weekly intake. The margin of exposure approach indicated the exposure to furan through beer as significant, this parameter being close to the critical limit.

Aflatoxin M1 in fresh milk collected from local markets of Karachi, Pakistan.

During 2016-2017, 156 samples of fresh milk samples were collected from local markets of Karachi, Pakistan and analysed for aflatoxin M1 (AFM1) contamination using ELISA technique. AFM1 was detected in 143 (91.7%) samples, ranged from 20 to 3090 ng L-1 with a mean level of 346.2 ng L-1. In 125 (80.1%) samples, the AFM1 contamination was greater than the maximum limit (ML = 50 ng L-1) set by EU. However, in 51 (32.7%) samples, the AFM1 level was higher than the ML of 500 ng L-1 as assigned by the USA. Statistical analysis showed that the AFM1 level in milk samples from summer was significantly (p < 0.05) higher than that obtained in winter. It was concluded that the AFM1 levels in the tested samples appear to be a serious public health problem. Therefore, immediate measures should be taken and re-evaluation done for the procedures for farming, transportation, refrigeration, and storage for the control of AFM1 level in milk samples.

Assessment of Mycotoxin Exposure in Breastfeeding Mothers with Celiac Disease.

OBJECTIVE: To assess the risk of mycotoxin exposure (aflatoxin M1, ochratoxin A, and zearalenone) in celiac disease (CD) breastfeeding mothers and healthy control mothers, as well as in their offspring, by quantifying these contaminants in breast milk. STUDY DESIGN: Thirty-five breastfeeding women with CD on a gluten-free diet and 30 healthy breastfeeding controls were recruited. Milk sampling was performed three times per day for three consecutive days. Mycotoxin content was investigated by an analytical method using immunoaffinity column clean-up and high-performance liquid chromatography (HPLC) with fluorometric detection. RESULTS: Aflatoxin M1 (AFM1) was detected in 37% of CD group samples (mean ± SD = 0.012 ± 0.011 ng/mL; range = 0.003-0.340 ng/mL). The control group showed lower mean AFM1 concentration levels in 24% of the analyzed samples (0.009 ± 0.007 ng/mL; range = 0.003-0.067 ng/mL, ANOVA on ranks, p-value < 0.01). Ochratoxin A and zearalenone did not differ in both groups. CONCLUSION: Breast milk AFM1 contamination for both groups is lower than the European safety threshold. However, the estimated exposures of infants from CD mothers and control mothers was much higher (≃15 times and ≃11 times, respectively) than the threshold set by the joint FAO/WHO Expert Committee on Food Additives (JECFA). Since incongruities exist between JECFA and the European Union standard, a novel regulatory review of the available data on this topic is desirable. Protecting babies from a neglected risk of high AFM1 exposure requires prompt regulatory and food-control policies.

Mycotoxins in infant/toddler foods and breakfast cereals in the US retail market.

The objective of this study was to conduct a mycotoxin survey of commercial infant/toddler foods (cereals and teething biscuits) and breakfast cereals in the United States. A total of 215 retail samples were collected from three geographical locations and analysed for aflatoxins, fumonisins, deoxynivalenol, HT-2 toxin, ochratoxin A, T-2 toxin, and zearalenone using a stable isotope dilution liquid-chromatography tandem mass spectrometry (LC-MS/MS) method. One or more mycotoxins were found in 69% (101/147) of the infant/toddler foods and 50% (34/68) of breakfast cereals. Mycotoxin co-occurrence was observed in 12% of infant/toddler foods and 32% of breakfast cereals. However, the concentrations of detected mycotoxins were lower than the current FDA action and guidance levels. Aflatoxins and HT-2 toxin were not detected in any of the samples, while deoxynivalenol was the most frequently detected mycotoxin. Rice-based cereals appeared to be less susceptible to mycotoxin contamination than other cereal types.

Polycyclic aromatic hydrocarbons in traditionally smoked meat products from the Baltic states.

A total of 77 traditionally smoked meat samples produced in Latvia, Lithuania, and Estonia were tested for the occurrence of four EU regulated polycyclic aromatic hydrocarbons (PAHs). Levels of PAHs exceeding the EU maximum levels for benzo[a]pyrene and for the sum of four PAHs (PAH4) were detected in 46% and 48% of the samples originating from Latvia. The detected BaP levels in smoked meats ranged from 0.05 to 166 µg kg-1, while the PAH4 content ranged from 0.42 to 628 µg kg-1. The mean dietary exposure to PAHs was estimated at the levels of 5.4 ng BaP/kg bw/day and 36 ng PAH4/kg bw/day. The margin of exposure (MOE) approach was utilised to assess the risks to Latvian consumers due to PAHs and the obtained MOEs were in a range of 7205-24,434, thus indicating a potential concern for consumer health for specific population groups.

Polycyclic aromatic hydrocarbons in teas using QuEChERS and HPLC-FLD.

Polycyclic aromatic hydrocarbons (PAHs) are food-processing contaminants considered to be carcinogenic and genotoxic. Due to its drying process stage, teas may be contaminated with PAHs. The aim of the study was to validate an analytical method involving QuEChERS and HPLC-FLD for the determination of PAH4 in teas and evaluate the contamination levels in 10 different types of teas from Brazil. Recoveries varied from 54% to 99% and relative standard deviations from 1% to 21%. Limits of detection and quantification were from 0.03 to 0.3 µg/kg and 0.1 to 0.5 µg/kg, respectively. Mate tea presented the highest PAH levels, with PAH4 varying from 194 to 1795 µg/kg; followed by black (1.8-186 µg/kg), white (24-119 µg/kg), and green teas (3.1-92 µg/kg). Teas with lowest PAH4 were strawberry, lemongrass, peppermint, and boldo. Only trace levels of PAHs were detected in tea infusions, so apparently it would not affect PAH intake by Brazilian population.

Co-occurrence of mycotoxins in commercial formula milk and cereal-based baby food on the Qatar market.

The present study was conducted to explore the occurrence of mycotoxins in commercial baby foods in Doha-Qatar. LCMS/MS- and HPLC-based analysis of baby food (n = 67) for 12 mycotoxins confirmed the presence of aflatoxin M1 (AFM1, 33%), ochratoxin A (OTA, 31%), deoxynivalenol (DON, 27%), aflatoxin B1 (AFB1, 22%), fumonisin B2 (FB2, 10%), zearalenone (ZEN, 4%) and T-2 toxin (2%). Noodles exhibited the maximum contamination percentage, with 33% of the samples being contaminated above the EU maximum limits, for at least one mycotoxin. Among the multi-grain flake samples, up to 28% and for the milk and milk-based-cereal samples, 14% contained at least one mycotoxin above the EU maximum limits. From all cereal-based food samples, 22%, 5%, 2% and 2% were concurrently contaminated with 2, 3, 4 and 5 mycotoxins, respectively. The occurrence of toxicological important mycotoxins in Qatari market warrants the implementation of strict regulatory limits to protect human health.

Human health risk assessment on the consumption of fruits and vegetables containing residual pesticides: A cancer and non-cancer risk/benefit perspective.

Pesticide residues in food is a public health concern. This study aimed to evaluate health risk and benefit associated with chronic consumption of fruits and vegetables (F&V) containing residual pesticides in the province of Quebec, Canada. Based on a representative sample of Quebecers (n=4727, aged 1-79) enrolled in the Canadian nutrition survey, population's mean chronic dietary exposure through consumption of F&V was evaluated for 169 different pesticide active ingredients (PAI), including 135 for which toxicological reference values (TRV) were available in the literature. Total lifetime cancer risk was estimated to be 3.3×10-4 considering the 28 substances for which an oral slope factor was also available. Non-cancer risk quotients greater than 1 were obtained at the 95th percentile of children's exposure for 10 of the 135 PAIs, and considering the most severe pesticide-specific TRV. Dithiocarbamates and imazalil are the authorized PAI that contribute the most to cancer and non cancer risk; they are therefore identified as "priority" PAI. For each estimated case of cancer triggered by PAI exposure, at least 88 cases were deemed prevented by the consumed F&V, based on the population's etiological fraction of the cancer risk that F&V prevent. Concluding, chronic health risks investigated are low and health benefits of F&V consumption by far outweigh the PAI-related risk. However, risk estimates are not negligeable and uncertainties remain. Thus, reducing PAI exposure through F&V consumption with a particular focus on "priority" PAI mentionned above, while maintaining an abundant and varied F&V diet, is desirable.

Re-evaluation of the WHO (2010) formaldehyde indoor air quality guideline for cancer risk assessment.

In 2010, the World Health Organization (WHO) established an indoor air quality guideline for short- and long-term exposures to formaldehyde (FA) of 0.1 mg/m3 (0.08 ppm) for all 30-min periods at lifelong exposure. This guideline was supported by studies from 2010 to 2013. Since 2013, new key studies have been published and key cancer cohorts have been updated, which we have evaluated and compared with the WHO guideline. FA is genotoxic, causing DNA adduct formation, and has a clastogenic effect; exposure-response relationships were nonlinear. Relevant genetic polymorphisms were not identified. Normal indoor air FA concentrations do not pass beyond the respiratory epithelium, and therefore FA's direct effects are limited to portal-of-entry effects. However, systemic effects have been observed in rats and mice, which may be due to secondary effects as airway inflammation and (sensory) irritation of eyes and the upper airways, which inter alia decreases respiratory ventilation. Both secondary effects are prevented at the guideline level. Nasopharyngeal cancer and leukaemia were observed inconsistently among studies; new updates of the US National Cancer Institute (NCI) cohort confirmed that the relative risk was not increased with mean FA exposures below 1 ppm and peak exposures below 4 ppm. Hodgkin's lymphoma, not observed in the other studies reviewed and not considered FA dependent, was increased in the NCI cohort at a mean concentration ≥0.6 mg/m3 and at peak exposures ≥2.5 mg/m3; both levels are above the WHO guideline. Overall, the credibility of the WHO guideline has not been challenged by new studies.

Exposure assessment to fumonisins B1, B2 and B3 through consumption of gluten-free foodstuffs intended for people affected by celiac disease.

Fumonisins are mycotoxins produced by Fusarium species and affecting maize crops. Some analogues of fumonisins are known for their toxic and possible carcinogenic effects on humans and animals. Because of their occurrence in corn-based food, diet is the main source of exposure to these mycotoxins, especially among people affected by celiac disease. Hence, the purpose of this paper was to evaluate the amount of fumonisins B1, B2 and B3 in maize-based products and to assess the exposure of people affected by celiac disease to fumonisins. The sample consisted of 154 gluten-free products analyzed according to method UNI EN 14352:2005. Results showed a heterogeneous contamination by fumoninisin B1, B2 and B3, although below limits of Commission Regulation No 1126/2007 and consistent with other European literature data. Exposure to fumonisins was evaluated for different age groups. In some cases exposure to fumonisins could not be ignored since the total intake could exceed EFSA Provisional Maximum Tolerable Intake up to 150%. Therefore, in the light of an overall contamination by fumonisins the total dietary exposure could be underrated not only in people affected by celiac disease, but also in non-celiac population.

Risk assessment of soils identified on firefighter turnout gear.

The purpose of this research was to identify the composition of soils on firefighter turnout gear and to determine the dermal exposure risks associated with the soils. Nine used Nomex hoods from the Philadelphia fire department were analyzed for the presence of trace metals and seven sets of used turnout gear were analyzed for semi-volatile organics. Turnout gear samples were removed from areas of the gear known to have high levels of dermal absorption including the collar, armpit, wrist, and crotch areas, from either the outer shell or thermal liner layers. The following compounds were detected: polycyclic aromatic hydrocarbons (PAHs), phthalate plasticizers, and polybrominated diphenyl ether flame retardants (PBDEs). A screening risk assessment was conducted by converting the measured concentrations to an estimated dermally absorbed dose based on estimates for the permeation coefficient (Kp) and an assumed firefighting exposure scenario. Benzo(a) pyrene had the highest dermal exposure risk based on carcinogenic effects and PBDE-99 had the highest dermal exposure risk based on non-carcinogenic effects. For the metals, arsenic had the highest dermal exposure risk for the use hoods.

Polycyclic aromatic hydrocarbons in cereal products on the Turkish market.

The contamination level of four EU marker polycyclic aromatic hydrocarbons (PAHs) in some cereal-derived products was surveyed in this study. Thirty-eight samples, 20 bread and 18 breakfast cereals, were purchased from retail shops and local markets of East Black sea region in Turkey. The samples were analysed for four EU marker PAHs, using ultrasonic extraction, solid-phase extraction (SPE) clean up and stable-isotope dilution gas chromatography with mass-spectrometric (GC/MS) detection. The method was validated with the parameters linearity, accuracy, precision, limit of detection (LOD), limit of quantitation (LOQ) and uncertainty. Total content of the four PAHs in bread varied from 0.19 to 0.46 µg kg(-1) and in breakfast cereals from 0.10 to 0.87 µg kg(-1).