Diagnostic value of cone beam computed tomography for root canal morphology assessment - a micro-CT based comparison.

OBJECTIVES: The aim of this study was to assess cone beam computed tomography (CBCT) as a root canal anatomy diagnostic tool by comparison with micro-CT gold-standard. MATERIALS AND METHODS: 216 two-rooted mandibular molars were first scanned in a CBCT device (200 µm voxel size) and posteriorly in a micro-CT scanner (19.61 µm). The volumes were sequentially screened to classify main root canal anatomy according to Vertucci classification, and for the presence of lateral canals and apical deltas, in both mesial and distal roots. RESULTS: Both methods revealed a higher prevalence of Vertucci Type II and IV in the mesial root, and Vertucci Type I in the distal root. The percentage of agreement for main root canal anatomy classification between CBCT and micro-CT scores was high (85.2%). CONCLUSION: Sensibility to detect both lateral canals and apical deltas with CBCT was low. These results attest to the fact that minor anatomical changes might be difficult to identify with CBCT imaging, hampering its diagnostic value.

Assessment of the root and canal morphology in the permanent dentition of Saudi Arabian population using cone beam computed and micro-computed tomography - a systematic review.

INTRODUCTION: Root canal treatment procedures require a thorough understanding of root and canal anatomy. The purpose of this systematic review was to examine the morphological differences of teeth root and their canals assessed using cone-beam computed and micro-computed tomography in Saudi Arabian population. METHODOLOGY: An electronic search was conducted in PubMed / Medline, Scopus, Google Scholar, and Web of Science databases until January 2023 to retrieve related studies. "Root canal morphology," "Saudi Arabia," "Micro-CT," and "cone-beam computed tomography" were used as keywords. A modified version of previously published risk of bias assessment tool was used to determine the quality assessment of included studies. RESULTS: The literature search revealed 47 studies that matched the criteria for inclusion, out of which 44 studies used cone beam computed tomography (CBCT) and three were micro-computed tomography (micro-CT) studies. According to the modified version of risk of bias assessment tool, the studies were categorized as low, moderate, and high risk of bias. A total of 47,612 samples were included which comprised of either maxillary teeth (5,412), or mandibular teeth (20,572), and mixed teeth (21,327). 265 samples were used in micro-CT studies while 47,347 teeth samples were used in CBCT studies. Among the CBCT studies, except for three, all the studies were retrospective studies. Frequently used imaging machine and software were 3D Accuitomo 170 and Morita's i-Dixel 3D imaging software respectively. Minimum and maximum voxel sizes were 75 and 300 µm, Vertucci's classification was mostly used to classify the root canal morphology of the teeth. The included micro-CT studies were in-vitro studies where SkyScan 1172 X-ray scanner was the imaging machine with pixel size ranging between 13.4 and 27.4 µm. Vertucci, Ahmed et al. and Pomeranz et al. classifications were applied to classify the root canal morphology. CONCLUSION: This systematic review revealed wide variations in root and canal morphology of Saudi population using high resolution imaging techniques. Clinicians should be aware of the common and unusual root and canal anatomy before commencing root canal treatment. Future micro-CT studies are needed to provide additional qualitative and quantitative data presentations.

Worldwide Assessment of the Root and Root Canal Characteristics of Maxillary Premolars - A Multi-center Cone-beam Computed Tomography Cross-sectional Study With Meta-analysis.

INTRODUCTION: This worldwide study examined the root and root canal characteristics of maxillary premolars and explored how demographic factors impact the outcomes. METHODS: Observers from 44 countries assessed 26,400 maxillary premolars using cone-beam computed tomography and employed a standardized screening method to gather data on multiple canal morphology and 3-rooted configuration (primary outcomes), as well as secondary outcomes related to root and root canal anatomies. Demographic factors such as ethnicity, sex, and age were collected for each participant. The intra- and inter-observer tests ensured observer reliability. Primary outcomes were represented as odds ratios and untransformed proportions accompanied by 95% confidence interval (CI) forest plots. Meta-analysis compared sub-groups and identified sources of heterogeneity (α = 5%). RESULTS: The overall prevalence of multiple canal morphology in the first premolar was 93.5% (95% CI, 93.3%-94.7%), while in the second premolar, it was 49.7% (95% CI, 44.9%-54.6%). The proportion of 3-rooted configuration was 1.8% (95% CI, 1.4%-2.1%) in the first premolar and 0.4% (95% CI, 0.3%-0.5%) in the second. Asian countries generally displayed fewer roots and root canals, while European nations showed higher counts (P < .05). Males exhibited higher percentages and odds ratios for both outcomes in both premolars. Younger patients demonstrated lower percentages of multiple root canal morphologies (P < .05). Factors such as tooth side, voxel size and field-of-view did not influence the outcomes (P > .05). CONCLUSIONS: The worldwide assessment of root and root canal characteristics of maxillary premolars has revealed a discernible influence of various factors such as tooth type, geographical region, ethnicity, sex, and age.

Assessment of the canal anatomy of the premolar teeth in a selected Turkish population: a cone-beam computed tomography study.

BACKGROUND: Teeth may have additional roots and a different number of root canals. Overlooked root canals may cause endodontic failure. The aim of this study was to investigate the prevalence of root canals and the number of roots of premolars in a selected Turkish population. MATERIALS AND METHODS: A total of 2,570 teeth from 1,438 patients were evaluated. The cone-beam computed tomography scans of 1,055 maxillary and 1,515 mandibular premolars were examined. RESULTS: Type IV root canal morphology was observed most frequently in maxillary first premolars (77%), and the rates of single and double channel formations were very similar (51% and 49%, respectively). Of the second maxillary premolars, 57.4% had Type I morphology, and 89.9% of the teeth were single-rooted, while 68.6% had a single root canal. The most common formation was Type I (85%) among mandibular first premolars, and a single root was observed in 95.6% of these teeth. In addition, 87% of the mandibular first premolars had a single root canal. The second mandibular premolars mostly had Type I (95.4%) formation, and 99.3% of the teeth were single-rooted, while 96.9% had a single root canal. CONCLUSION: According to our findings, 51% of maxillary first premolars had a single root, 79.4% had two root canals, and 77% had Type IV (77%) formation. Maxillary second premolars mostly had Type I formation. In addition, a single root and single root canal formation were most common. Mandibular first premolars generally had a single root and single root canal formation, but 13% had two root canals, and 6.4% had Type V formation. More than 95% of mandibular second premolars had Type I formation.

Assessment of the Root Canal Similarity in Contralateral Mandibular Incisors.

INTRODUCTION: The purpose of this study was to determine the degree of similarity between contralateral mandibular incisors utilising 3-dimensional (3D) models obtained from micro-computed tomographic (micro-CT) scans of extracted human teeth. The null hypothesis was that contralateral mandibular incisors do not exhibit matching symmetry. METHODS: Sixty pairs (n = 120) of extracted mandibular incisors were obtained from 30 patients and scanned with micro-CT with a voxel size of 15.0 µm. 3D virtual models of the pulpal cavities were rendered. Geometric morphometric deviation analysis was performed after mirroring, automatic alignment, and co-registration of the models of contralateral teeth root mean square (RMS) errors were calculated. The quantitative analysis of the 3D models included 6 different geometric parameters. Data sets were examined with a 2-sample Kolmogorov-Smirnov test. Post hoc retrospective power analysis was performed to find statistical power (α = 0.05). RESULTS: Contralateral pairs had a narrower distribution in deviation than random pairs. Also, contralateral pairs showed a statistically higher similarity coefficient (5 out of 6 geometric parameters) compared to random pairs (P < .001); no difference was found when comparing central to lateral pairs or between Vertucci type I configurations compared to non-type I. RMS errors had significantly lower Contralateral premolars (CPs) values than random pairs (P < .001). CONCLUSIONS: A high degree of similarity was demonstrated for pairing contralateral mandibular incisors using 3D models. The similarity between contralateral central and lateral incisors suggests that when screened and matched, these 4 teeth might be used in endodontic research where similar root canal anatomy is crucial.

Assessment of root canal anatomy of maxillary and mandibular canine teeth: a cone-beam computed tomography study / Evaluación de la anatomía del canal radicular de caninos maxilares y mandibulares: un estudio de tomografía computarizada de haz cónico

Abstract To investigate the root canal anatomy of permanent maxillary and mandibular canines in a Turkish subpopulation using cone beam computed tomography (CBCT). Retrospective CBCT data of 300 patients admitted to our clinic between 2016 and 2018 were screened and evaluated. A total of 235 patients, 100 males and 135 females, aged 14-76 years (mean age 37.27±13.40) were included in this study. A total of 191 (44,8%) maxillary canine teeth and 235 (55,2%) mandibular canine teeth were examined. The number of roots and root canal morphology according to Vertucci's classification, the presence of accessory canals, and the position of the apical foramen of the root were analyzed. The effect of gender and age on the incidence of root canal morphology was also investigated. The majority of the teeth had a Type I canal configuration in both maxillary canines (100%) and mandibular canines (92,8%). In the mandibular canines the other canal patterns found were Type III (6,8%), and Type II (0,4%). Apical foramen was centrally positioned in the majority of the teeth, 70,2% and 66,8% in maxillary and mandibular canines, respectively. The occurrence of two roots in mandibular canines was 3,8% and the root canal separation was found 53,8% and 46,2% in the middle and cervical third of the root, respectively. No significant statistical difference was observed effect of gender and age on the incidence of the root canal morphology and the position of the apical foramen. Due to the diverse morphology and the potential presence of a second canal for canine teeth among the Turkish subpopulation, dentists should perform endodontic treatments with greater care. CBCT is an accurate tool for the morphological assessment of the root canals.

Resumen Investigar la anatomía del conducto radicular de los caninos maxilares y mandibulares permanentes en una subpoblación turca utilizando la tomografía computarizada de haz cónico (CBCT). Se examinaron y evaluaron los datos CBCT retrospectivos de 300 pacientes ingresados en nuestra clínica entre 2016 y 2018. Un total de 235 pacientes, 100 hombres y 135 mujeres, de entre 14 y 76 años (edad media de 37,27±13,40) fueron incluidos en este estudio. Se examinaron un total de 191 (44,8%) dientes caninos maxilares y 235 (55,2%) dientes caninos mandibulares. Se analizó el número de raíces y la morfología del conducto radicular según la clasificación de Vertucci, la presencia de conductos accesorios y la posición del foramen apical de la raíz. También se investigó el efecto del sexo y la edad en la incidencia de la morfología del conducto radicular. La mayoría de los dientes tenían una configuración de conductos de tipo I tanto en los caninos maxilares (100%) como en los caninos mandibulares (92,8%). En los caninos mandibulares los otros patrones de conductos encontrados fueron el Tipo III (6,8%) y el Tipo II (0,4%). El foramen apical estaba situado en posición central en la mayoría de los dientes, 70,2% y 66,8% en los caninos maxilares y mandibulares, respectivamente. La ocurrencia de dos raíces en los caninos mandibulares es del 3,8% y la separación del conducto radicular se encontró en el tercio medio y cervical de la raíz en el 53,8% y el 46,2%, respectivamente. No se observó ninguna diferencia estadística significativa en el efecto del sexo y la edad sobre la incidencia de la morfología del conducto radicular y la posición del foramen apical. Debido a la diversa morfología y a la posible presencia de un segundo conducto en los dientes caninos entre la subpoblación turca, los odontólogos deberían realizar los tratamientos endodónticos con mayor cuidado. La CBCT es una herramienta precisa para la evaluación morfológica de los conductos radiculares.

Cone-beam and micro-computed tomography for the assessment of root canal morphology: a systematic review.

This study presents an overview of the accuracy of cone beam computed tomography (CBCT) compared with micro-computed tomography (µCT) in the assessment of root canal morphology of extracted human permanent teeth. A database search in PubMed, PubMed Central, Embase, Scopus, Opengrey, Scielo and Virtual Health Library was conducted which compared root canal morphology of extracted human permanent teeth on the accuracy of CBCT with µCT. In accordance with PRISMA statement guidelines, data were extracted on study characteristics, target mediators, sampling and assay techniques and the parameters associated with obtaining the image and ability to identify the root canal morphology. Amongst 2734 records, ten fulfilled the inclusion criteria. Four studies compared the accuracy of CBCT and µCT in the assessment of root canal morphology using Vertucci's classification, with at least one CBCT group or subgroup of each study presented high agreement compared to the µCT. Six studies assessed more detailed root canal morphology, including two articles that found a lack of agreement between these imaging systems. Risk of bias was deemed low in three studies, moderate in four and high in three. CBCT can be as accurate as µCT in the assessment of several morphological features of extracted human permanent teeth; however there are some exceptions related to the more detailed morphological aspects. Voxel size likely influences the ability to detect these features, though the different aspects of exposure setting used in studies components may be confounding factors. CBCT may be considered for the assessment of root canal morphology ex-vivo.

Micro-computed tomographic assessment of the variability and morphological features of root canal system and their ramifications.

OBJECTIVES: This study assessed the incidence and variability features of root canals system (RCS) and their ramifications according to Pucci & Reig (PR) (1944) and the American Association of Endodontists (AAE) (2017) by micro-computed tomography (µCT). METHODOLOGY: 500 representative extracted human teeth of each tooth group (n=50) (maxillary/mandibular central and lateral incisors, canines, first and second premolars and molars) were scanned by µCT with a resolution of 26.70 µm. The reconstructed cross-sections images and the visualization of the continuous slices in the transversal axis were performed using DataViewer software. RCS were classified according to Pucci & Reig (main canal, collateral canal, lateral canal, secondary canal, accessory canal, intercanal, recurrent canal) and AAE (main canal, accessory canal, lateral canal). The apical deltas were assessed for both classifications. The prevalence of apical deltas was evaluated using the Chi-squared test (p<0.05). RESULTS: According to PR, a higher incidence of lateral canals was observed in maxillary canines (10%), central incisors (8%) and first premolars (6%). Using AAE, the highest incidence of lateral canals was observed in the mandibular first premolars (85%), first and second molars (84%), lateral incisors (67%), canines (59%), and in maxillary first premolars (52%). Regarding accessory canals, the PR showed a frequency in 2% of the maxillary lateral incisors and maxillary and mandibular first premolars and 3% of mandibular first and second molars. On the other hand, the AAE showed the highest incidence of accessory canals in 86% of the maxillary first premolars, 71% in mandibular lateral incisors, 69% in mandibular first premolars, 65% in mandibular canines, and 56% in maxillary canines. The PR showed the lowest incidence of apical deltas for all dental groups when compared with AAE (p=0.004). Interestingly, distal canals in maxillary molars showed a significant discrepancy between classifications (p=0.027). CONCLUSIONS: µCT enabled accurately describing the RC system and related ramifications, adding to the PR and AAE classifications, with some discrepancies reported for maxillary molars. Clinical Relevance This µCT study enabled a thorough description of the variability among root canals and their ramifications, including clinically relevant details on the presence and location of lateral canals and accessories in all human tooth groups, beyond the currently existing classification systems.

Cone-beam and micro-computed tomography for the assessment of root canal morphology: a systematic review

Abstract This study presents an overview of the accuracy of cone beam computed tomography (CBCT) compared with micro-computed tomography (μCT) in the assessment of root canal morphology of extracted human permanent teeth. A database search in PubMed, PubMed Central, Embase, Scopus, Opengrey, Scielo and Virtual Health Library was conducted which compared root canal morphology of extracted human permanent teeth on the accuracy of CBCT with μCT. In accordance with PRISMA statement guidelines, data were extracted on study characteristics, target mediators, sampling and assay techniques and the parameters associated with obtaining the image and ability to identify the root canal morphology. Amongst 2734 records, ten fulfilled the inclusion criteria. Four studies compared the accuracy of CBCT and μCT in the assessment of root canal morphology using Vertucci's classification, with at least one CBCT group or subgroup of each study presented high agreement compared to the μCT. Six studies assessed more detailed root canal morphology, including two articles that found a lack of agreement between these imaging systems. Risk of bias was deemed low in three studies, moderate in four and high in three. CBCT can be as accurate as μCT in the assessment of several morphological features of extracted human permanent teeth; however there are some exceptions related to the more detailed morphological aspects. Voxel size likely influences the ability to detect these features, though the different aspects of exposure setting used in studies components may be confounding factors. CBCT may be considered for the assessment of root canal morphology ex-vivo.

Micro-computed tomographic assessment of the variability and morphological features of root canal system and their ramifications

Abstract Objectives This study assessed the incidence and variability features of root canals system (RCS) and their ramifications according to Pucci & Reig (PR) (1944) and the American Association of Endodontists (AAE) (2017) by micro-computed tomography (μCT). Methodology 500 representative extracted human teeth of each tooth group (n=50) (maxillary/mandibular central and lateral incisors, canines, first and second premolars and molars) were scanned by μCT with a resolution of 26.70 μm. The reconstructed cross-sections images and the visualization of the continuous slices in the transversal axis were performed using DataViewer software. RCS were classified according to Pucci & Reig (main canal, collateral canal, lateral canal, secondary canal, accessory canal, intercanal, recurrent canal) and AAE (main canal, accessory canal, lateral canal). The apical deltas were assessed for both classifications. The prevalence of apical deltas was evaluated using the Chi-squared test (p<0.05). Results According to PR, a higher incidence of lateral canals was observed in maxillary canines (10%), central incisors (8%) and first premolars (6%). Using AAE, the highest incidence of lateral canals was observed in the mandibular first premolars (85%), first and second molars (84%), lateral incisors (67%), canines (59%), and in maxillary first premolars (52%). Regarding accessory canals, the PR showed a frequency in 2% of the maxillary lateral incisors and maxillary and mandibular first premolars and 3% of mandibular first and second molars. On the other hand, the AAE showed the highest incidence of accessory canals in 86% of the maxillary first premolars, 71% in mandibular lateral incisors, 69% in mandibular first premolars, 65% in mandibular canines, and 56% in maxillary canines. The PR showed the lowest incidence of apical deltas for all dental groups when compared with AAE (p=0.004). Interestingly, distal canals in maxillary molars showed a significant discrepancy between classifications (p=0.027). Conclusions μCT enabled accurately describing the RC system and related ramifications, adding to the PR and AAE classifications, with some discrepancies reported for maxillary molars. Clinical Relevance This μCT study enabled a thorough description of the variability among root canals and their ramifications, including clinically relevant details on the presence and location of lateral canals and accessories in all human tooth groups, beyond the currently existing classification systems.

The Middle Pleistocene (MIS 12) human dental remains from Fontana Ranuccio (Latium) and Visogliano (Friuli-Venezia Giulia), Italy. A comparative high resolution endostructural assessment.

The penecontemporaneous Middle Pleistocene sites of Fontana Ranuccio (Latium) and Visogliano (Friuli-Venezia Giulia), set c. 450 km apart in central and northeastern Italy, respectively, have yielded some among the oldest human fossil remains testifying to a peopling phase of the Italian Peninsula broadly during the glacial MIS 12, a stage associated with one among the harshest climatic conditions in the Northern hemisphere during the entire Quaternary period. Together with the large samples from Atapuerca Sima de los Huesos, Spain, and Caune de l'Arago at Tautavel, France, the remains from Fontana Ranuccio and Visogliano are among the few mid-Middle Pleistocene dental assemblages from Western Europe available for investigating the presence of an early Neanderthal signature in their inner structure. We applied two- three-dimensional techniques of virtual imaging and geometric morphometrics to the high-resolution X-ray microtomography record of the dental remains from these two Italian sites and compared the results to the evidence from a selected number of Pleistocene and extant human specimens/samples from Europe and North Africa. Depending on their preservation quality and on the degree of occlusal wear, we comparatively assessed: (i) the crown enamel and radicular dentine thickness topographic variation of a uniquely represented lower incisor; (ii) the lateral crown tissue proportions of premolars and molars; (iii) the enamel-dentine junction, and (iv) the pulp cavity morphology of all available specimens. Our analyses reveal in both samples a Neanderthal-like inner structural signal, for some aspects also resembling the condition shown by the contemporary assemblage from Atapuerca SH, and clearly distinct from the recent human figures. This study provides additional evidence indicating that an overall Neanderthal morphological dental template was preconfigured in Western Europe at least 430 to 450 ka ago.

Assessment of apical transportation caused by nickel-titanium rotary systems with full rotation and reciprocating movements using extracted teeth and resin blocks with simulated root canals: A comparative study.

OBJECTIVES: : We compared apical transportation in the WaveOne and ProTaper Next systems, which are rotary nickel-titanium systems with reciprocating and continuous rotation movements, respectively, using manual measurements obtained from resin blocks with simulated root canals and double digital radiographs of extracted teeth. MATERIALS AND METHODS: : We used 30 resin blocks with simulated root canals and 30 extracted teeth for this study. The same endodontist performed root canal shaping using the WaveOne or ProTaper Next system. We assessed apical transportation by measuring the amounts (in mm) of material lost 1 mm from the apical foramen in the resin blocks and by using double digital radiography for the extracted teeth. Significant differences between groups were assessed using t-tests. P < 0.05 was considered statistically significant. RESULTS: : The amount of apical transportation differed significantly between the two systems when resin blocks were used for assessment (P < 0.05), but there were no significant differences when extracted teeth were used (P < 0.05). CONCLUSIONS: In the current study, there was no significant difference in apical transportation between natural teeth prepared using WaveOne and those prepared using ProTaper Next. However, significant differences were observed between the two systems with resin blocks. These findings indicate that the use of resin blocks is not an accurate method for apical transportation evaluation.

Micro-CT assessment of the shaping ability of four root canal instrumentation systems in oval-shaped canals.

AIM: To compare the shaping ability of four root canal instrumentation systems in oval-shaped canals using micro-computed tomographic analysis. METHODOLOGY: Forty anatomically matched mandibular incisors were scanned and assigned to four groups (n = 10), according to the canal preparation protocol: BioRace, Reciproc, Self-Adjusting File (SAF) and TRUShape systems. After canal instrumentation, the specimens were rescanned, and the registered pre- and postoperative datasets were examined to evaluate the percentages of accumulated hard-tissue debris, untouched canal walls and dentine removed. Kruskal-Wallis and Mann-Whitney U-tests with Bonferroni correction were used to compare the variables in the groups (α = 5%). RESULTS: The preparation techniques did not affect the percentage of accumulated hard-tissue debris (P = 0.126). The percentage of untouched canal areas was significantly higher for BioRace (32.38%)compared to Reciproc (18.95%) and SAF (16.08%) systems (P < 0.05). Reciproc removed significantly more dentine (4.18%) than BioRace (2.21%) and SAF (2.56%) (P < 0.05). The TRUShape system had intermediate results for both untouched canal walls (19.20%) and dentine removed (3.77%), with no significant difference compared to BioRace, Reciproc and SAF systems. CONCLUSIONS: The preparation techniques resulted in the same level of accumulated hard-tissue debris. Compared to the other tested systems, BioRace was associated with more untouched canal walls and Reciproc produced the greatest amount of removed dentine. Although it touched more of the root canal walls, the SAF system removed less dentine, whereas TRUShape had intermediate results for these same parameters. None of the systems tested were able to provide optimal shaping ability in oval-shaped canals.

Assessment of the Second Mesiobuccal Root Canal in Maxillary First Molars: A Cone-beam Computed Tomographic Study.

INTRODUCTION: The purpose of this study was to investigate the incidence and location of the second mesiobuccal (MB2) root canal of the maxillary first molar and the relationship between the presence of an MB2 canal and the distribution of canal orifices on the pulpal floor with the aid of cone-beam computed tomographic (CBCT) technology. METHODS: A total of 1008 maxillary first molars (548 patients) were randomly selected and analyzed through CBCT imaging. The association between the incidence of MB2 canals and potential impacting factors including sex, side, age, and the distribution of the main root canal orifices on the pulpal floor was explored. The interorifice distances (ie, the length of a line between the center point of any 2 orifices) at the pulpal floor level were measured using Mimics 10.01 software (ImageWorks, Materialise, Belgium). RESULTS: The majority of 3-rooted maxillary first molars showed 2 root canals (85.4%) in the mesiobuccal root. The incidence of MB2 canals had no statistically significant difference between the left and right sides (P > .05) but had a significant association with the patients' sex and age (P < .05). Receiver operating characteristic curve analysis showed a high diagnostic accuracy (the area under the receiver operating characteristic curve = 0.92) of using the distance ratio of the interorifice distance between the main mesiobuccal and the palatal root canal orifices to the interorifice distance between the distobuccal and the palatal root canal orifices to predict the presence of an MB2 canal. A larger distance ratio (>1.26) indicated a highly probable existence of an MB2 canal. In this study, no molar presented an MB2 canal with a distance ratio of less than 1.16, whereas all molars with a ratio greater than 1.37 presented an MB2 canal without exception. A Bland-Altman scatterplot showed great agreement between the distances of the main mesiobuccal and the distobuccal canal orifices and the second mesiobuccal and the distobuccal canal orifices. CONCLUSIONS: Understanding the incidence of MB2 canals and the distribution pattern of canal orifices on the pulpal floor may help clinicians to quickly identify and locate MB2 canals.

Retrospective Assessment of Healing Outcome of Endodontic Treatment for Mandibular Molars with C-shaped Root Canal.

INTRODUCTION: A thorough knowledge of the anatomic morphology of the root canal system is necessary for the long-term success of the root canal therapy. The occurrence of C-shaped root canal configuration is one such variation. Achievement of favorable prognosis after commencing root canal therapy in such teeth is one of the challenges imposed on the endodontist. Hence, we evaluated the healing occurring after endodontic therapy in patients with C-shaped root canals in mandibular molars. MATERIALS AND METHODS: The present study was conducted in the Department of Conservative Dentistry of the institution and included assessment of all the patients who underwent root canal treatment of the mandibular first and second molars. Endodontic therapy was performed in all the cases by experienced endodontist. Final postoperative radiographs were taken. Recording of the data of the personal and clinical details of a total of 250 patients was done. All the clinical and radiographic details of the patients, such as tooth location in the jaw, presence or absence of C-shaped canals, status of the pulp tissue, presence or absence of the fractures, and other details of the patients were recorded. Radiographic and clinical examination of the tooth of the patients was done during the baseline visit and further during the follow-up visits. The presence of C-shaped root canals was confirmed using the radiographs. Periapical index (PI) scoring system was used. Categories defined for enlisting the healing after the root canal treatment with the assessment of the PI score. All the results were analyzed by Statistical Package for the Social Sciences software. RESULTS: Vital pulp tissue was encountered in majority of the cases. C-shaped root canal configuration was observed in 40% of the cases included in the present study. After completion of the endodontic therapy, complete crown placement was done in only 22% of the cases. In cases of vital teeth with C-shaped root canals configuration, most of the teeth showed complete healing. Significant results were obtained while comparing the complete coverage crown parameter in relation to the healing process in teeth with C-shaped root canals. CONCLUSION: In the present study, no significant effect of the C-shaped root canal configuration was found on the healing rate of the endodontic therapy in mandibular molars. CLINICAL SIGNIFICANCE: Meticulous endodontic therapy with special techniques should be done while preparing teeth with C-shaped root canals.

Quantitative transportation assessment in curved canals prepared with an off-centered rectangular design system.

The purpose of this study was to assess the ability of an off-centered rectangular design system [ProTaper Next (PTN)] to maintain the original profile of the root canal anatomy. To this end, ProTaper Universal (PTU), Reciproc (R) and WaveOne (WO) systems were used as reference techniques for comparison. Forty clear resin blocks with simulated curved root canals were randomly assigned to 4 groups (n = 10) according to the instrumentation system used: PTN, PTU, R and WO. Color stereomicroscopic images of each block were taken before and after instrumentation. All image processing and data analysis were performed with an open source program (Fiji v.1.47n). Evaluation of canal transportation was obtained for two independent regions: straight and curved portions. Univariate analysis of variance and Tukey's Honestly Significant Difference test were performed, and a cut-off for significance was set at α = 5%. Instrumentation systems significantly influenced canal transportation (p = 0.000). Overall, R induced significantly lower canal transportation compared with WO, PTN and PTU (p = 0.000). The curved portion displayed superior canal transportation compared to the straight one (p = 0.000). The significance of the difference among instrumentation systems varied according to the canal level evaluated (p = 0.000). In its straight portion, R and WO exhibited significantly lower transportation than PTN; whereas in the curved portion, R produced the lowest deviation. PTU exhibited the highest canal transportation at both levels. It can be concluded that PTN produced less canal transportation than PTU and WO; however, R exhibited better centering ability than PTN.

Micro-Computed Tomography Assessment of Apical Accessory Canal Morphologies.

INTRODUCTION: The morphologic features of accessory canals (ACs) were investigated by using micro-computed tomography technique with a centerline fitting algorithm. METHODS: Ninety-three 3-mm-long apical root segments with unobstructed ACs were scanned by micro-computed tomography at 2.5-µm scanning resolution. After automatic segmentation, a centerline of the reconstructed lateral canal was developed, and the diameter, length, shape, and undulation of ACs were analyzed along the centerline. RESULTS: Of 178 unobstructed ACs identified, the median diameter was 67.0 µm, the average length was 786.6 µm, the predominant shape was oval, and the undulation was tortuous rather than straight. CONCLUSIONS: The diameter, length, shape, and undulation may vary among ACs in particular from the pulpal space to the external root surface, which may complicate the debridement of the ACs.

Assessment of Pulp Regeneration Induced by Stem Cell Therapy by Magnetic Resonance Imaging.

INTRODUCTION: This study was designed to evaluate the usefulness of magnetic resonance imaging (MRI) to assess the regeneration of pulp tissue. METHODS: Mobilized dental pulp stem cells and granulocyte colony-stimulating factor with collagen were transplanted into mature pulpectomized teeth for pulp regeneration (n = 4). The controls consisted of pulpectomized teeth with or without collagen and normal teeth with intact pulp tissue (n = 4, each). The signal intensity (SI) of MRI using T2 sequences was compared after the extraction of teeth in dogs. MRI was correlated with the corresponding histologic findings. RESULTS: Pulp tissue was fully regenerated 90 days after cell transplantation. On the other hand, the root canal was empty in the control collagen-transplanted teeth at 90 days. The SI of the normal teeth was significantly higher than that of nonvital pulpectomized teeth and the controls of collagen transplanted teeth at 90 days. The stem cell transplanted teeth showed a gradual decrease in the SI until 180 days at which time the SI was similar to that in the normal teeth and significantly higher than that in the teeth transplanted with collagen alone without the stem cells. CONCLUSIONS: The changes in the SI of the pulplike tissue were consistent with the histologic findings, showing the potential usefulness of the noninvasive method to serially access the efficacy of pulp regenerative therapy.

Quantitative transportation assessment in curved canals prepared with an off-centered rectangular design system

Abstract The purpose of this study was to assess the ability of an off-centered rectangular design system [ProTaper Next (PTN)] to maintain the original profile of the root canal anatomy. To this end, ProTaper Universal (PTU), Reciproc (R) and WaveOne (WO) systems were used as reference techniques for comparison. Forty clear resin blocks with simulated curved root canals were randomly assigned to 4 groups (n = 10) according to the instrumentation system used: PTN, PTU, R and WO. Color stereomicroscopic images of each block were taken before and after instrumentation. All image processing and data analysis were performed with an open source program (Fiji v.1.47n). Evaluation of canal transportation was obtained for two independent regions: straight and curved portions. Univariate analysis of variance and Tukey's Honestly Significant Difference test were performed, and a cut-off for significance was set at α = 5%. Instrumentation systems significantly influenced canal transportation (p = 0.000). Overall, R induced significantly lower canal transportation compared with WO, PTN and PTU (p = 0.000). The curved portion displayed superior canal transportation compared to the straight one (p = 0.000). The significance of the difference among instrumentation systems varied according to the canal level evaluated (p = 0.000). In its straight portion, R and WO exhibited significantly lower transportation than PTN; whereas in the curved portion, R produced the lowest deviation. PTU exhibited the highest canal transportation at both levels. It can be concluded that PTN produced less canal transportation than PTU and WO; however, R exhibited better centering ability than PTN.

Current Assessment of Reciprocation in Endodontic Preparation: A Comprehensive Review--Part II: Properties and Effectiveness.

INTRODUCTION: Many reciprocating file systems (RFs) have recently been introduced. This article reviews the properties, effectiveness, and clinical outcomes of the RFs. METHODS: A PubMed electronic search was conducted by using appropriate key words to identify investigations on RFs. After retrieving the full-text relevant articles, the cross citations were also identified. RESULTS: This review summarizes the mechanical properties, shaping ability, preservation of the root canal anatomy, shaping time, cleaning effectiveness, microcrack formation, bacterial reduction, extrusion of debris, and removal of root canal filling materials of RFs. CONCLUSIONS: The favorable results of RFs indicate their potential application as viable alternatives to rotary file systems, yet no filing system is able to entirely prepare the dentin of canals, totally eliminate sessile and planktonic microorganisms, or remove the filling material completely from the root canal system.