A cost-effective and facile technique for realizing fabric based microfluidic channels using beeswax and PVC stencils.

Microfluidic channels fabricated over fabrics or papers have the potential to find substantial application in the next generation of wearable healthcare monitoring systems. The present work focuses on the fabrication procedures that can be used to obtain practically realizable fabric-based microfluidic channels (µFADs) utilizing patterning masks and wax, unlike conventional printing techniques. In this study, comparative analysis was used to differentiate channels obtained using different masking tools for channel patterning as well as different wax materials as hydrophobic barriers. Drawbacks of the conventional tape and candle wax technique were noted and a novel approach was used to create microfluidic channels through a facile and simple masking technique using PVC clear sheets as channel stencils and beeswax as the channel barriers. The resulting fabric based microfluidic channels with varying widths as well as complex microchannel, microwell, and micromixer designs were investigated and a minimum channel width resolution of 500 µm was successfully obtained over cotton based fabrics. Thereafter, the PVC clear sheet-beeswax based microwells were successfully tested to confine various organic and inorganic samples indicating vivid applicability of the technique. Finally, the microwells were used to make a simple and facile colorimetric assay for glucose detection and demonstrated effective detection of glucose levels from 10 mM to 50 mM with significant color variation using potassium iodide as the coloring agent. The above findings clearly suggest the potential of this alternative technique for making low-cost and practically realizable fabric based diagnostic devices (µFADs) in contrast to the other approaches that are currently in use.

Paraffin waxes in the North-Western Mediterranean Sea: A comprehensive assessment in the Pelagos Sanctuary, a Specially Protected Area of Mediterranean Importance.

Paraffin waxes are widely recognized as emerging marine pollutants, even their classification by the recent monitoring programs and the knowledge of their occurrence, and sources of contamination in marine ecosystems are poorly defined and reported. Wax presence and distribution have been evaluated in different environmental compartments in the Pelagos Sanctuary (Mediterranean Sea) floating on the sea surface and stranded on beaches, focussing on their characterization, accumulation areas and pollution inputs. More than 2500 yellow paraffin residues were detected and analysed in the study area showing a prevailing dimension smaller than 5 mm. The Genoa Canyon and the waters facing Gorgona Island resulted in the more polluted areas representing two distinct hotspots of wax accumulation potentially related to the high density of tanker vessels sailing to and from the harbour of Genova and Livorno. Higher concentrations of beached particles were found along the Tuscan coast (11 items/100 m) and on Pianosa Island (110 items/m2). This study gives valuable insights into paraffin wax pollution in the Pelagos Sanctuary, emphasizing the need for harmonized monitoring and detection methods to elucidate the potential impacts on marine organisms. Moreover, mitigating actions are crucial to prevent and curb the waxes pollution of marine ecosystems.

Candelilla Wax Extracted by Traditional Method and an Ecofriendly Process: Assessment of Its Chemical, Structural and Thermal Properties.

A comparative study was carried out on the chemical, structural and thermal properties of candelilla wax from four wax-producing communities in Mexico, which was obtained by two extraction processes, the conventional one using sulfuric acid (SA) and an eco-friendly alternative process using citric acid (CA) as the extracting agent. The waxes were analyzed by basic chemistry (acidity, saponification, ester indexes, and others), color, Fourier transform infrared spectroscopy (FTIR), Raman micro-spectroscopy, X-ray diffraction (XRD), differential scanning calorimetry (DSC), and hardness and brittleness measurements. The waxes obtained by the environmentally friendly process showed differences in their physicochemical properties when compared to waxes from the conventional process. In addition, they showed some improvements, such as lighter shades and harder waxes, suggesting that the new environmentally friendly process is a viable option.

Metals Contents in Honey, Beeswax and Bees and Human Health Risk Assessment Due to Consumption of Honey: A Case Study from Selected Districts in Khyber Pakhtunkhwa, Pakistan.

Beeswax, honey, and live in-hive worker bees were collected in this study from eight districts in Khyber Pakhtunkhwa, Pakistan. The concentration of seven essential elements (copper, calcium, zinc, iron, nickel, chromium and manganese) and two non-essentials (lead and cadmium) were determined. All of the samples were found to have a random distribution of metal concentrations. The plentiful metals with high concentrations in the gathered samples were discovered to be calcium, iron, and zinc. The health concerns related with metal intake in honey were assessed using the Average Daily Dose (ADD), Hazard Quotients (HQs) and Hazard Index (HI) models. Children were found to have higher estimated health risk values for the components assessed in all samples than adults. All of the computed ADD values were lower than the matching reference (RfD) values. The matching HI values of metals in various honeys were found to be less than one, implying that honey consumption in the studied area has no non carcinogenic risk. Cancer risks (CR) was also calculated for intake of Pb, Cr, Ni and Cd in honey in the selected districts. The CR values for Cr and Cd exceeded 1E-4 in various districts such as Karak, Kohat, Nowshera, Bajur, Dir Upper, and Mohmand Agency, signifying that there was a small danger involved. In the case of Karak, the Ni CR value was greater than the allowed limits. As a result, it is important to keep an eye on the concentration of these metals in honey because anthropogenic input could raise their concentration in the future, posing a health danger.

Relevance of animal studies in the toxicological assessment of oil and wax hydrocarbons. Solving the puzzle for a new outlook in risk assessment.

Paraffin waxes and white mineral oils are distinct petroleum products separated from a common feedstock by crystallization, where only n-alkanes, iso- and cyclo-alkanes with a linear backbone of ∼ 20 carbon atoms long, selectively crystalize out from the oil to form the wax, which is solid at room temperature, whereas oils remain liquid. Up until the 90's, these differences were reflected in separated regulatory assessments. A paradigm shift occurred when Fischer 344 rats (F-344) developed liver epithelioid granuloma following exposure to low and medium viscosity oils or waxes. This lesion was used as common denominator between these products to be jointly assessed under the common term "mineral hydrocarbons - MHC", obviating compositional differences. This regulatory paradigm dominated for the next 30 years, exacerbated by the EFSA 2012 evaluation using the analytical term "MOSH" (mineral oil saturated hydrocarbons) which encompassed these products under single chromatography fraction. The reconstruction of historical developments, together with recent EFSA-sponsored studies of toxicity and accumulation and supporting literature, has allowed us to understand the etiology of the F-344 rat hepatic epithelioid granuloma, which is presented in an adverse outcome pathway (AOP). Considering chemical composition, it clearly demonstrates that the hepatic effects in F-344 rats caused by linear alkanes of waxes are irrelevant for humans. Waxes are thus not MOSH and should thus be evaluated on their own merit. The term MOSH should not include n-alkanes and be exclusively used to mineral oil fractions when considering their chemical makeup for a relevant human hazard assessment.

Use, perception, and local management of Copernicia prunifera (Miller) H. E. Moore in rural communities in the Brazilian Savanna.

BACKGROUND: Copernicia prunifera belongs to the Arecaceae family, and its production chain includes a set of economic activities based on the use of the stipe, petiole, fiber, fruits, roots, and leaves from which carnaúba wax is extracted, an economically valuable resource in the region. This study aimed to evaluate the uses, management, and perception of the species by local extractors. METHODS: Two communities were studied, Bem Quer, where 15 extractors of carnaúba leaves were interviewed, and Cana, where 21 extractors considered specialists were interviewed, totaling a sample of 36 interviewees. Interviewees were asked questions about uses, ways of handling, and perception of morphological variation in the carnaúba leaves. The number of leaves extracted and the income obtained from the sale of leaves were estimated from interviews and notes that each leader of extractors held during the year of the research and previous years, as well as direct observations made by researchers in the communities which recollection area of straw hold about 80 thousand individuals of C. prunifera. A regression analysis was used to explore the relationships between social variables (age, time in extractive activity, and income obtained from extraction) with the number of leaves exploited. RESULTS: The leaf was indicated as the most used part, from which an important powder is extracted for the production of wax. In addition, the leaf was also indicated to be used for fertilization and construction. The relationship between the socioeconomic variables, income from extraction, and the number of leaves extracted (in thousands) was significant (R2 = 0.73 and p < 0.001). However, the other variables analyzed in this study, such as the time spent extracting leaves and the years of residence in the community (R2 = 0.03 and p > 0.05); the number of leaves extracted and interviewee age (R2= 0.05 and p > 0.05); and the number of leaves extracted and extraction time (R2 = 0.04 and p > 0.05) did not indicate a relationship. CONCLUSION: Local extractors observed that new leaves have the highest sales value, as they have the highest production of powder. In addition, economic factor is the preponderant force that directs the management strategies of native species. For this species, however, morphological and genetic studies are needed for further clarification.

An inexpensive, high-throughput µPAD assay of microbial growth rate and motility on solid surfaces using Saccharomyces cerevisiae and Escherichia coli as model organisms.

Many microbial phenotypes are differentially or exclusively expressed on agar surfaces, including biofilms, motility, and sociality. However, agar-based assays are limited by their low throughput, which increases costs, lab waste, space requirements, and the time required to conduct experiments. Here, we demonstrate the use of wax-printed microfluidic paper-based analytical devices (µPADs) to measure linear growth rate of microbes on an agar growth media as a means of circumventing the aforementioned limitations. The main production materials of the proposed µPAD design are a wax printer, filter paper, and empty pipet boxes. A single wax-printed µPAD allowing 8 independent, agar-grown colonies costs $0.07, compared to $0.20 and $9.37 for the same number of replicates on traditional microtiter/spectrophotometry and Petri dish assays, respectively. We optimized the µPAD design for channel width (3 mm), agar volume (780 µL/channel), and microbe inoculation method (razor-blade). Comparative analyses of the traditional and proposed µPAD methods for measuring growth rate of nonmotile (Saccharomyces cerevisiae) and motile (flagellated Escherichia coli) microorganisms suggested the µPAD assays conferred a comparable degree of accuracy and reliability to growth rate measurements as their traditional counterparts. We substantiated this claim with strong, positive correlations between the traditional and µPAD assay, a significant nonzero slope in the model relating the two assays, a nonsignificant difference between the relative standard errors of the two techniques, and an analysis of inter-device reliability. Therefore, µPAD designs merit consideration for the development of enhanced-throughput, low-cost microbial growth and motility assays.

Comparison of 3D printed nose bolus to traditional wax bolus for cost-effectiveness, volumetric accuracy and dosimetric effect.

INTRODUCTION: Three-dimensional printing technology has the potential to streamline custom bolus production in radiotherapy. This study evaluates the volumetric, dosimetric and cost differences between traditional wax and 3D printed versions of nose bolus. METHOD: Nose plaster impressions from 24 volunteers were CT scanned and planned. Planned virtual bolus was manufactured in wax and created in 3D print (100% and 18% shell infill density) for comparison. To compare volume variations and dosimetry, each constructed bolus was CT scanned and a plan replicating the reference plan fields generated. Bolus manufacture time and material costs were analysed. RESULTS: Mean volume differences between the virtual bolus (VB) and wax, and the VB and 18% and 100% 3D shells were -3.05 ± 11.06 cm3 , -1.03 ± 8.09 cm3 and 1.31 ± 2.63 cm3 , respectively. While there was no significant difference for the point and mean doses between the 100% 3D shell filled with water and the VB plans (P> 0.05), the intraclass coefficients for these dose metrics for the 100% 3D shell filled with wax compared to VB doses (0.69-0.96) were higher than those for the 18% and 100% 3D shell filled with water and the wax (0.48-0.88). Average costs for staff time and materials were higher for the wax ($138.54 and $20.49, respectively) compared with the 3D shell prints ($10.58 and $13.87, respectively). CONCLUSION: Three-dimensional printed bolus replicated the VB geometry with less cost for manufacture than wax bolus. When shells are printed with 100% infill density, 3D bolus dosimetrically replicates the reference plan.

Pesticide and trace element residues in honey and beeswax combs from Israel in association with human risk assessment and honey adulteration.

Beehive products are considered sentinels for environmental pollutants. The presence of trace elements and pesticides in honey and beeswax may pose a health hazard to consumers. The study's aim was to determine the profile of pesticides and trace elements in Israeli honey and beeswax samples in relation to human risk assessment. At least two pesticides contaminated the honey and beeswax samples simultaneously, in which, amitraz metabolites and coumaphos were frequently detected. The neonicotinoid insecticides and 2,4-dichlorophenoxyacetic acid, were found only in honey samples, whereas the more lipophilic pesticides were predominantly found in beeswax. In honey, chromium displayed the highest mean concentration, followed by zinc, whereas lead and molybdene occurred only in beeswax. Our findings indicate that the daily consumption of honey and beeswax together may compromise children's health. Sucrose-syrup fed honey could not be distinguished from floral honey based on sugar profile, rather by its trace elements levels.

An assessment of pesticide exposures and land use of honey bees in Virginia.

Large-scale honey bee colony loss threatens pollination services throughout the United States. An increase in anthropogenic pressure may influence the exposure of hives to household and agricultural pesticides. The objective of this survey was to provide an assessment of the risk of exposure to commonly used pesticides to honey bee colonies in Virginia in relation to land use. Adult honey bee, pollen, and wax samples from colonies throughout Virginia were evaluated for pyrethroid, organophosphate, organochlorine, and triazine pesticides using gas chromatography-mass spectrometry analysis. Of the 11 pesticides analyzed, nine were detected in one or more hive matrices. The probability of detecting a pesticide in pollen was less in forests than in pasture, agriculture, or urban landscapes. Coumaphos and fluvalinate were significantly more likely to be detected across all matrices with concentrations in wax as high as 15500 and 6970 ng/g (dry weight), respectively, indicating the need for further research on the potential effects of miticide accumulation in wax to larval and adult bees.

Assessment of the Minor-Component Transformations in Fat during the Green Spanish-Style Table Olive Processing.

There is an increasing interest of consumers for natural and healthy products. This work assesses the transformations that green Spanish-style processing of Manzanilla and Hojiblanca table olives produces on the minor components of their fat. Discriminant analysis showed that most of the variability was not due to processing (24.4%) but to differences between cultivars (59.2%). Therefore, the final products have a similar quality to the original olive fat; that is, the quality of the fat was scarcely affected. The only systematic trends observed were the decrease in hexacosanol, tetracosanol, and octacosanol (fatty alcohols) and C46 (wax), after lye treatment, and the high levels of alkyl esters in the packaged product. Thus, minor-component levels in green table olives are, in general, within the limits established for extra virgin olive oil since the alkyl esters should be considered habitual products of fermentation and not as an alteration as in olive oil.

Portable and low-cost colorimetric office paper-based device for phenacetin detection in seized cocaine samples.

An office paper-based colorimetric device is proposed as a portable, rapid, and low-cost sensor for forensic applications aiming to detect phenacetin used as adulterant in illicit seized materials such as cocaine. The proposed method uses white office paper as the substrate and wax printing technology to fabricate the detection zones. Based on the optimum conditions, a linear analytical curve was obtained for phenacetin concentrations ranging from 0 to 64.52µgmL‒1, and the straight line was in accordance with the following equation: (Magenta percentage color) = 1.19 + 0.458 (CPhe/µgmL‒1), R2 = 0.990. The limit of detection was calculated as 3.5µgmL‒1 (3σ/slope). The accuracy of the proposed method was evaluated using real seized cocaine samples and the spike-recovery procedure.

Development of an automated wax-printed paper-based lateral flow device for alpha-fetoprotein enzyme-linked immunosorbent assay.

In this study, a novel wax-printed paper-based lateral flow device has been developed as an alternative approach for an automated and one-step enzyme-linked immunosorbent assay (ELISA). The design pattern consisted of a non-delayed channel, a wax-delayed channel, a test zone and a control zone. This system was easily fabricated on a nitrocellulose membrane using a wax-printing method and then baked in an oven at 100°C for 1min. The four barriers of the wax-delayed channel could delay the flow time for 11s compared to the flow time of the non-delayed channel. To use the device under optimal conditions, alpha-fetoprotein (AFP) was detected at a limit of detection of 1ngmL-1 and assessed with the naked eye within 10min. A colorimetric intensity was also measured using a smart phone and computer software at a linear range of 0.1-100ngmL-1 with a good correlation. Furthermore, the proposed device was successfully applied to detect AFP in human serum. Therefore, the wax-printing demonstrates a user-friendly, easy and quick method for the fabrication of the device, which could be used as a one-step, portable, disposable, low-cost, simple, instrument-free and point-of-care device for the automated ELISA.

Exposure assessment of honeybees through study of hive matrices: analysis of selected pesticide residues in honeybees, beebread, and beeswax from French beehives by LC-MS/MS.

Apiculture and pollination services are seriously threatened by bee weakening and losses phenomena. In this context, a survey was performed on samples from beehives across French areas during the 2012-2016 growing seasons, primarily taken from symptomatic colonies. A total of 488 honeybees, beebread, and wax were analyzed for the presence of pesticide residues. A total of 13 analytes including neonicotinoids and pyrethroids insecticides together with some of their metabolites and the fungicide boscalid were screened within samples. Methodologies based on efficient modified quick, easy, cheap, effective, rugged, and safe extractions followed by an LC-MS/MS quantification were implemented for each matrix. Thirty-eight percent of the 125 bee samples, 61% of the 87 wax samples, and 77% of the 276 beebread samples contained at least one of the targeted pesticides. Beebread was the most contaminated matrix with an average of two pesticide detections by positive sample and a maximum of seven compounds for a sample. Neonicotinoids and boscalid were the most often detected pesticides, whatever the matrix. The comparison of neonicotinoid detections in samples collected before and after the partial neonicotinoid ban in France displays a decrease in the frequency of detections for contamination levels lower than 1 ng/g in beebread. For higher levels and other matrices, no tendency can be drawn.

[Topical haemostatic agents in neurosurgery].

Haemostasis is of fundamental significance in neurosurgery, and insufficient control of bleeding is associated with morbidity and mortality. Topical haemostatic agents play an important role, as the characteristics of neuronal tissue limit the use of classical surgical haemostasis techniques. Appropriate choice of agent depends on the location and type of bleeding, but also on knowledge of the products' mechanisms of action, indications, price and accessibility. Biological products are superior to the mechanical in efficacy but require more preparation and are significantly more cost-intensive.

TLC Fingerprinting and Pattern Recognition Methods in the Assessment of Authenticity of Poplar-Type Propolis.

Propolis is a "natural" remedy with prominent biological activity, which is used as dietary supplement. In the absence of clinical studies that would substantiate these claims, information on the biological activity of propolis is valuable. This study comprises chromatographic, image processing and chemometric approach for phenolic profiling of Serbian, Croatian and Slovenian propolis test solutions. Modern thin-layer chromatography equipment in combination with software for image processing was applied for fingerprinting and data acquisition, whereas the principal component analysis was used as pattern recognition method. Characterization of phenolic profile was performed along with the determination of the botanical and geographical origin of propolis. High-performance thin-layer chromatograms reveal that Central and Southeastern European propolis samples are rich in flavonoids. In addition, phenolic compounds proved to be suitable markers for the determination of European propolis authenticity.

Assessment of Thermal and Textural Characteristics and Consumer Preferences of Lemon and Strawberry Flavored Fish Oil Organogels.

In this study, strawberry and lemon flavored fish oil organogels (FOO) were prepared with beeswax as the organogelator. The physical, thermal and textural characteristics as well as the consumer preferences of the flavored organogels were determined in comparison with fish oil and FOO containing no flavor. Furthermore, the stability of the organogels was evaluated during 90 day storage at 4°C. The results revealed that, structurally stable fish oil organogels as spreadable products might be formed and that flavoring of the gels enhances consumer preference. Thus, flavoring of fish oil organogels could be a challenge in increasing the consumption of fish oil.

Economic Assessment of Supercritical CO2 Extraction of Waxes as Part of a Maize Stover Biorefinery.

To date limited work has focused on assessing the economic viability of scCO2 extraction to obtain waxes as part of a biorefinery. This work estimates the economic costs for wax extraction from maize stover. The cost of manufacture (COM) for maize stover wax extraction was found to be € 88.89 per kg of wax, with the fixed capital investment (FCI) and utility costs (CUT) contributing significantly to the COM. However, this value is based solely on scCO2 extraction of waxes and does not take into account the downstream processing of the biomass following extraction. The cost of extracting wax from maize stover can be reduced by utilizing pelletized leaves and combusting the residual biomass to generate electricity. This would lead to an overall cost of € 10.87 per kg of wax (based on 27% combustion efficiency for electricity generation) and €4.56 per kg of wax (based on 43% combustion efficiency for electricity generation). A sensitivity analysis study showed that utility costs (cost of electricity) had the greatest effect on the COM.

Laboratory evaluation of airborne particulate control treatments for simulated aircraft crash recovery operations involving carbon fiber composite materials.

OBJECTIVE: This study compared four treatment protocols to reduce airborne composite fiber particulates during simulated aircraft crash recovery operations. DESIGN: Four different treatments were applied to determine effectiveness in reducing airborne composite fiber particulates as compared to a "no treatment" protocol. Both "gold standard" gravimetric methods and real-time instruments were used to describe mass per volume concentration, particle size distribution, and surface area. The treatment protocols were applying water, wetted water, wax, or aqueous film-forming foam (AFFF) to both burnt and intact tickets of aircraft composite skin panels. The tickets were then cut using a small high-speed rotary tool to simulate crash recovery operations. SETTING: Aerosol test chamber. SUBJECTS, PARTICIPANTS: None. INTERVENTIONS: Airborne particulate control treatments. MAIN OUTCOME MEASURES: Measures included concentration units of milligrams per cubic meter of air, particle size distribution as described by both count median diameter and mass median diameter and geometric standard deviation of particles in micrometers, and surface area concentration in units of square micrometers per cubic centimeter. Finally, a Monte Carlo simulation was run on the particle size distribution results. Comparison was made via one-way analysis of variance. RESULTS: A significant difference (p < 0.0001) in idealized particle size distribution was found between the water and wetted water treatments as compared to the other treatments for burnt tickets. CONCLUSIONS: Emergency crash recovery operations should include a treatment of the debris with water or wetted water. The resulting increase in particle size will make respiratory protection more effective in protecting the response crews.