Nail fixation of unstable trochanteric fractures with or without cement augmentation: A cost-utility analysis in the United States: Cost-utility of cement augmentation.

OBJECTIVES: Recent clinical studies have shown favorable outcomes for cement augmentation for fixation of trochanteric fracture. We assessed the cost-utility of cement augmentation for fixation of closed unstable trochanteric fractures from the US payer's perspective. METHODS: The cost-utility model comprised a decision tree to simulate clinical events over 1 year after the index fixation surgery, and a Markov model to extrapolate clinical events over patients' lifetime, using a cohort of 1,000 patients with demographic and clinical characteristics similar to that of a published randomized controlled trial (age ≥75 years, 83 % female). Model outputs were discounted costs, quality-adjusted life years (QALYs), and incremental cost-effectiveness ratio (ICER) over a lifetime. Deterministic and probabilistic sensitivity analyses were performed to assess the impact of parameter uncertainty on results. RESULTS: Fixation with augmentation reduced per-patient costs by $754.8 and had similar per-patient QALYs, compared to fixation without augmentation, resulting in an ICER of -$130,765/QALY. The ICER was most sensitive to the utility of revision surgery, mortality risk ratio after the second revision surgery, mortality risk ratio after successful index surgery, and mortality rate in the decision tree model. The probability that fixation with augmentation was cost-effective compared with no augmentation was 63.4 %, 58.2 %, and 56.4 %, given a maximum acceptable ceiling ratio of $50,000, $100,000, and $150,000 per QALY gained, respectively. CONCLUSION: Fixation with cement augmentation was the dominant strategy, driven mainly by reduced costs. These results may support surgeons in evidence-based clinical decision making and may be informative for policy makers regarding coverage and reimbursement.

3D-printed antibiotic-loaded bone cement spacers as adjunctive therapy for hip periprosthetic infection after arthroplasty: A clinical assessment.

OBJECTIVE: To explore the effect of three-dimensional (3D) printing to create personalized antibiotic-loaded bone cement (ALBC) spacers to assist in treatment of periprosthetic infection after total hip arthroplasty (THA). METHODS: The data of 40 patients with postoperative infection after THA were analysed retrospectively. The patients were divided into two groups: the 3D-printing group (age 47-78 years, n = 20) and the conventional group (age 57-78 years, n = 20). In stage I surgery, 3D-printed silicone moulds were used to create ALBC spacers for the 3D-printing group, while traditional manual methods were used to create spacers for the conventional group. After the infection was controlled, both groups underwent conventional hip revision surgery (stage II surgery). All patients were evaluated using the Harris Hip Score (HHS) (primary outcome) for hip function. RESULTS: All 40 patients had follow-up data from 3 months after stage I surgery and 12 months after stage II surgery. The intergroup difference in HHS was 11.25 points [97.5% confidence interval (CI) 7.92-14.58; P < 0.01] at 3 months after stage I surgery, and 9.15 points (97.5% CI 4.82-13.48; P < 0.01) at 12 months after stage II surgery. The overall difference between the two groups was 9.55 points (97.5% CI 5.83-13.27; P < 0.01), which was significant (P < 0.05). CONCLUSION: During the follow-up period, the hip function of the 3D-printing group was superior to that of the conventional group following the treatment of infections after THA.

What Are the Differences in Hospital Cost Associated With the Use of Cemented Versus Cementless Femoral Stems in Hemiarthroplasty and Total Hip Arthroplasty for the Treatment of Femoral Neck Fracture?

BACKGROUND: The purpose of this study was to determine if there is a difference in hospital costs associated with the use of cemented versus cementless femoral stems in hemiarthroplasty (HA) and total hip arthroplasty (THA) for the treatment of femoral neck fracture (FNF). METHODS: This retrospective cohort study utilizes the 2019 Medicare Provider Analysis and Review Limited Data Set. Patients undergoing arthroplasty for the treatment of FNF were identified. Patients were grouped by cemented or cementless femoral stem fixation. There were 16,148 patients who underwent arthroplasty for FNF available: 4,913 THAs (3,705 patients who had cementless femoral stems and 1,208 patients who had cemented femoral stems) and 11,235 HAs (6,099 patients who had cementless femoral stems and 5,136 who had cemented femoral stems). Index hospital costs were estimated by multiplying total charges by cost-to-charge ratios. Costs were analyzed using univariable and multivariable generalized linear models. RESULTS: Cemented femoral stem THA generated 1.080 times (95% confidence interval, 1.06 to 1.10; P < .001), or 8.0%, greater index hospital costs than cementless femoral stem THA, and cemented femoral stem HA generated 1.042 times (95% confidence interval, 1.03 to 1.05; P < .001), or 4.2%, greater index hospital costs than cementless femoral stem HA. CONCLUSIONS: Cemented femoral stems for FNF treated with either THA or HA are associated with only a small portion of increased cost compared to cementless femoral stems. Providers may choose the method of arthroplasty stem fixation for the treatment of FNF based on what they deem most appropriate for the specific patient.

The economic and clinical impact of fast- versus slow-setting cement in primary total knee arthroplasty.

INTRODUCTION: New bone cement products have been developed attempting to shorten their setting time and thus cut down time in the operating room. This study determines whether faster-setting bone cement shortens time in the operating room, and whether the quantity used compromises postoperative TKA outcomes. Additionally, this study looks at cost analyses of the quantity of bone cement used in TKA procedures. MATERIALS AND METHODS: One-hundred and sixty patients at a single institution with primary TKA surgeries between January 2019 and December 2021, and a clinic follow-up of at least one year, were identified. Five cement products used in this time period were identified and categorized by fast- or slow-setting products if their set times were marketed below or above six minutes, respectively. RESULTS: Estimated blood loss was higher in patients receiving fast-setting cements (160.0 vs 126.4 mL; p = 0.0009); however, operative time showed no difference between the cohorts (88.2 vs 89.2 min; p = 0.99). Fewer bags of cement were used for the fast cohort (1.3 vs 1.8 bags; p < 0.0001). The fast group was significantly cheaper on average per patient only when comparing between antibiotic bone cements (p = 0.007). No differences were found in postoperative outcomes between the two groups. CONCLUSIONS: No differences were found in operative times between the fast and slow cemented groups. Fewer bags of faster-setting cement only proved cost saving relative to other antibiotic bone cements studied. Nonetheless, decreased usage of fast cement did not result in any different postoperative outcomes compared to slow cements. LEVEL OF EVIDENCE: III.

Demographics and Early Outcomes of Commercial Antibiotic Cement Usage for Infection Prophylaxis During Primary Total Knee Arthroplasty in Patients Older Than 65 Years: An American Joint Replacement Registry Study.

INTRODUCTION: The use of antibiotic-laden bone cement (ALBC) for infection prophylaxis in the setting of primary total knee arthroplasty (TKA) remains controversial. Using data from the American Joint Replacement Registry (AJRR), (1) we examined the demographics of ALBC usage in the United States and (2) identified the effect of prophylactic commercially available ALBC on early revision and readmission for prosthetic joint infection (PJI) after primary TKA. METHODS: This is a retrospective cohort study of the AJRR from 2017 to 2020. Patients older than 65 years undergoing primary cemented TKA with or without the use of commercially available antibiotic cement were eligible for inclusion (N = 251,506 patients). Data were linked to available Medicare claims to maximize revision outcomes. Demographics including age, sex, race/ethnicity, Charlson Comorbidity Index (CCI), preoperative inflammatory arthritis, region, and body mass index (BMI) class were recorded. Cox proportional hazards regression analysis was used to evaluate the association between the two outcome measures and ALBC usage. RESULTS: Patients undergoing cemented TKA with ALBC were more likely to be Non-Hispanic Black ( P < 0.001), have a CCI of 2 or 3 ( P < 0.001), reside in the South ( P < 0.001), and had a higher mean BMI ( P < 0.001). In the regression models, ALBC usage was associated with increased risk of 90-day revision for PJI (hazards ratio 2.175 [95% confidence interval] 1.698 to 2.787) ( P < 0.001) and was not associated with 90-day all-cause readmissions. Male sex, higher CCI, and BMI >35 were all independently associated with 90-day revision for PJI. DISCUSSION: The use of commercial ALBC in patients older than 65 years for primary TKA in the AJRR was not closely associated with underlying comorbidities suggesting that hospital-level and surgeon-level factors influence its use. In addition, ALBC use did not decrease the risk of 90-day revision for PJI and was not associated with 90-day readmission rates.

Safety assessment, whole genome sequence, and metabolome analysis of Streptococcus thermophilus CICC 20372 for bone cement fermentation.

Bone is a kind of meat processing by-product with high nutritional value but low in calorie, which is a typical food in China and parts of East Asian countries. Microbial fermentation by lactic acid bacteria showed remarkable advantages to increase the absorption of nutrients from bone cement by human body. Streptococcus thermophilus CICC 20372 is proven to be a good starter for bone cement fermentation. No genes encoding virulence traits or virulence factors were found in the genome of S. thermophilus CICC 20372 by a thorough genomic analysis. Its notable absence of antibiotic resistance further solidifies the safety. Furthermore, the genomic analysis identified four types of gene clusters responsible for the synthesis of antimicrobial metabolites. A comparative metabolomic analysis was performed by cultivating the strain in bone cement at 37 °C for 72 h, with the culture in de Man, Rogosa, and Sharpe (MRS) medium as control. Metabolome analysis results highlighted the upregulation of pathways involved in 2-oxocarboxylic acid metabolism, ATP-binding cassette (ABC) transporters, amino acid synthesis, and nucleotide metabolism during bone cement fermentation. S. thermophilus CICC 20372 produces several metabolites with health-promoting function during bone cement fermentation, including indole-3-lactic acid, which is demonstrated ameliorative effects on intestinal inflammation, tumor growth, and gut dysbiosis. In addition, lots of nucleotide and organic acids were accumulated at higher levels, which enriched the fermented bone cement with a variety of nutrients. Collectively, these features endow S. thermophilus CICC 20372 a great potential strain for bone food processing.

Risk assessment for sandwich vertebral fractures in the treatment of osteoporosis vertebral compression fractures using two methods of bone cement reinforcement.

PURPOSE: Bone cement augmentation surgery includes percutaneous vertebroplasty (PVP) and percutaneous kyphoplasty (PKP). In this study, we aimed to investigate the risk of sandwich vertebral fractures in the treatment of osteoporotic vertebral compression fractures via PVP and PKP. METHODS: We performed a retrospective analytical study and included 61 patients with osteoporotic vertebral compression fractures who underwent PVP and PKP at the Spinal Surgery Department of The Second Hospital of Liaocheng Affiliated with Shandong First Medical University from January 2019 to January 2022. These patients were divided into the following two groups by simple random sampling: group A (N = 30) underwent PVP treatment and group B (N = 31) underwent PKP treatment. The surgical time, fluoroscopy frequency, visual analog scale (VAS) score, amount of bone cement, the leakage rate of bone cement in intervertebral space, Cobb angle, and the incidence of fractures in both groups of sandwich vertebral were recorded after 1 year of follow-up. RESULTS: No statistically significant difference was found in terms of surgical time, fluoroscopy frequency, and VAS score between the two groups (P > 0.05). However, a statistically significant difference was found in terms of the amount of bone cement, the leakage rate of bone cement intervertebral space, Cobb angle, and the incidence of vertebral body fractures in both groups (P < 0.05). The amount of bone cement, the leakage rate of bone cement in intervertebral space, Cobb angle, and sandwich vertebral fractures were higher in Group A than in Group B. CONCLUSIONS: When PVP and PKP were performed to treat osteoporotic vertebral compression fractures, the sandwich vertebral exhibited a risk of fracture. PVP exhibited a greater relative risk than PKP, which may be due to the relatively larger amount of bone cement, higher rate of bone cement leakage in the intervertebral space, and larger Cobb angle.

Toward global availability of low-cost, patient-specific cranial implants: creation and validation of automated CranialRebuild freeware application.

PURPOSE: Financial restrictions limit the options for hermetically precise, patient-specific cranial implants (PSCIs) after decompressive hemicraniectomy (DHC) in low-income countries. Use of image segmentation, modeling software, and 3D printers has lowered costs associated with PSCIs. However, requirements of time and technical expertise have prevented widespread utilization. Our objective was to create a fully automated software algorithm that is able to generate a virtual model (.STL) of a negative of an implant using CT imaging following DHC. METHODS: A freeware algorithm (CranialRebuild) was constructed with the following capabilities: (1) after the upload of digital imaging and communications in medicine files, the normal side is analyzed in reference to the side of DHC, (2) Boolean subtraction is used to obtain a virtual image of the desired implant, and (3) a two-piece virtual model (.STL) of the PSCI mold is generated. In four cadaveric specimens, a standard DHC was performed. Post-DHC CT imaging was used to obtain a .STL of the negative of the implant, which was then printed using poly-lactic acid (PLA). Methylmethacrylate cement was used to generate a PSCI from the mold. The PSCIs were implanted into the index specimens; cosmesis was subjectively evaluated using a 5-point Likert scale. RESULTS: Two specimens were graded as 4/5, indicating that minor post-processing modification was needed for optimal cosmesis. Two specimens were graded as 3/5, indicating that optimal cosmesis could be obtained following moderate post-processing modification. CONCLUSIONS: CranialRebuild can be used to create hermetically precise PSCIs at a fraction of the price of third-party vendors. Validation of this technology has significant implications for the accessibility of customized cranial implants worldwide.

Routine use of antibiotic-laden bone cement in total knee arthroplasty is a cost-effective practice in the single-payer healthcare system.

PURPOSE: The purpose of this study was to determine the cost-effectiveness of antibiotic-laden bone cement (ALBC) in primary total knee arthroplasty (TKA) from the perspective of a single-payer healthcare system. METHODS: A cost-utility analysis (CUA) was performed over a 2-year time horizon comparing primary TKA with either ALBC or regular bone cement (RBC) from the perspective of the single-payer Canadian healthcare system. All costs were in 2020 Canadian dollars. Health utilities were in the form of quality-adjusted life years (QALYs). Model inputs for cost, utilities and probabilities were derived from the literature as well as regional and national databases. One-way deterministic sensitivity analysis was performed. RESULTS: Primary TKA with ALBC was found to be more cost-effective compared to primary TKA with RBC with an incremental cost-effectiveness ratio (ICER) of -3,637.79 CAD/QALY. The use of routine ALBC remained cost-effective even with cost increases of up to 50% per bag of ALBC. TKA with ALBC was no longer cost-effective if the rate of PJI following this practice increased 52%, or the rate of PJI following the use of RBC decreased 27%. CONCLUSIONS: The routine use of ALBC in TKA is a cost-effective practice in the single-payer Canadian healthcare system. This remains to be the case even with a 50% increase in the cost of ALBC. Policy makers and hospital administrators of single-payer healthcare systems can leverage this model to inform their local funding policies. Future prospective reviews and randomized controlled trials from the perspective of various healthcare models can further shed light on this issue. LEVEL OF EVIDENCE: III.

Assessment of foraminal decompression following discoplasty using a combination of ex vivo testing and numerical tools.

Percutaneous Cement Discoplasty (PCD) is a minimally invasive surgical technique to treat degenerated intervertebral discs. When the disc is severely degenerated, the vacuum observed in place of the nucleus pulposus can be filled with bone cement to restore the disc height, open the foramen space, and relieve pain. This study aimed to evaluate the foramen geometry change due to PCD, in the loaded spine. Cadaveric spines (n = 25) were tested in flexion and extension while Digital Image Correlation (DIC) measured displacements and deformations. Tests were performed on simulated pre-operative condition (nucleotomy) and after PCD. Registering DIC images and the 3D specimen geometry from CT scans, a 3D model of the specimens aligned in the experimental pose was obtained for nucleotomy and PCD. Foramen space volume was geometrically measured for both conditions. The volume of cement injected was measured to explore correlation with the change of foramen space. PCD induced a significant overall foraminal decompression in both flexion (foramen space increased by 835 ± 1289 mm3, p = 0.001) and extension (1205 ± 1106 mm3, p < 0.001), confirming that the expected improvements of PCD show also during spine motion. Furthermore, in extension when the foramen is the most challenged, the impact of PCD on the foramen correlated with the injected cement volume.

Antibiotic release from PMMA spacers and PMMA beads measured with ELISA: Assessment of in vitro samples and drain fluid samples of patients.

For prosthetic joint infections, antibiotic loaded poly methyl methacrylate (PMMA) spacer or beads can be used to release high concentrations of antibiotics locally at the infection site, while minimizing systemic toxicity. The aim of this study is to determine in vitro and in vivo pharmacokinetic release profile of antibiotics from PMMA spacers and PMMA beads. For the in vitro experiment, the PMMA spacers or beads were submerged in phosphate-buffered saline and gentamicin concentrations were determined from collected specimen at several times points, measured with enzyme-linked immunosorbent assays (ELISA). To assess the in vivo antibiotic release profile of different spacers, wound drainage fluid samples were collected after implantation of a spacer over a period of maximum 14 days. After 48 h, the burst gentamicin concentration elution was 9862 ± 1782 ng/ml (mean ± SD) from spacers versus 38,394 ± 7071 ng/ml (mean ± SD) for beads. Over 35 days, spacers had eluted a cumulative mean concentration of 13,812 ± 3548 versus 55,048 ± 12,006 ng/ml for beads (p < 0.001). Clinical samples of patients with a Vancogenx® spacer showed higher gentamicin release than Refobacin™ spacers (p < 0.001). This is the first study that measured the release data of local antibiotics with ELISA. Compare to spacers, the exact release values of gentamicin from PMMA beads are more than 10 times higher and reached a maximum much later than spacers. This makes the use of PMMA beads more preferable to use for treatment of the infection itself.

An independent inter- and intra-observer agreement assessment of Yeom classification for bone cement leakage following vertebroplasty/kyphoplasty.

STUDY DESIGN: An inter- and intra-observer agreement study. BACKGROUND: In recent years, vertebroplasty and kyphoplasty have been widely used in treating osteoporotic vertebral compression fractures (OVCF) though the clinical efficacy of them is still controversial. However, there are also inevitable complications, first and foremost is bone cement leakage (BCL). Yeom classification is commonly used to evaluate BCL. The objective of this study is to assess its reliability and reproducibility, and to explore its clinical application value. METHODS: All 58 patients with BCL following vertebroplasty/kyphoplasty were involved. Six spine surgeons were selected to be evaluators as they were unaware of the identity of the patients and the treatment they received. They classified BCL according to Yeom system, we used kappa (K) to assess the inter- and intra-observer agreement. After 12 weeks, we repeated the analysis. RESULTS: The inter-observer reliability of Yeom classification was substantial with K value of 0.71 (1st assessment) and 0.73 (2nd assessment). The intra-observer reproducibility of Yeom classification was near perfect with K value of 0.88. CONCLUSION: Yeom classification system has substantial inter-observer reliability and near perfect intra-observer reproducibility in BCL following vertebroplasty/kyphoplasty, which can be widely used in clinical care as an appropriate instrument for early observation, mechanism and severity cognition, and prognosis predicting of BCL. Besides, the adding of type M (the mixed type) may improve the classification.

An assessment of physical properties and the viability of osteoblast-like cells of cefazolin-impregnated calcium sulfate bone-void filler.

Calcium sulfate, an injectable and biodegradable bone-void filler, is widely used in orthopedic surgery. Based on clinical experience, bone-defect substitutes can also serve as vehicles for the delivery of drugs, for example, antibiotics, to prevent or to treat infections such as osteomyelitis. However, antibiotic additions change the characteristics of calcium sulfate cement. Moreover, high-dose antibiotics may also be toxic to bony tissues. Accordingly, cefazolin at varying weight ratios was added to calcium sulfate samples and characterized in vitro. The results revealed that cefazolin changed the hydration reaction and prolonged the initial setting times of calcium sulfate bone cement. For the crystalline structure identification, X-ray diffractometer revealed that cefazolin additive resulted in the decrease of peak intensity corresponding to calcium sulfate dihydrate which implying incomplete phase conversion of calcium sulfate hemihydrate. In addition, scanning electron microscope inspection exhibited cefazolin changed the morphology and size of the crystals greatly. A relatively higher amount of cefazolin additive caused a faster degradation and a lower compressive strength of calcium sulfate compared with those of uploaded samples. Furthermore, the extract of cefazolin-impregnated calcium sulfate impaired cell viability, and caused the death of osteoblast-like cells. The results of this study revealed that the cefazolin additives prolonged setting time, impaired mechanical strength, accelerated degradation, and caused cytotoxicity of the calcium sulfate bone-void filler. The aforementioned concerns should be considered during intra-operative applications.

Mid-Term Performance of the First Mass-Produced Three-Dimensional Printed Cementless Tibia in the United States as Reported in the American Joint Replacement Registry.

BACKGROUND: Cementless tibial components have shown improvements in clinical performance compared to predicate designs, though evidence supporting mid-term performance and fixation is scarce. The purpose of this study is to determine the mid-term survivorships, revision rates, and reasons why 3-dimensional printed cementless tibial baseplates (3DTKAs) failed compared to other cementless as well as cemented tibial baseplates reported from the American Joint Replacement Registry (AJRR) data. METHODS: All primary total knee arthroplasty (TKA) cases performed in patients 65 years of age or older within the AJRR from January 2, 2012 through June 30, 2020 were queried. A total of 28,631 3DTKAs were identified from 428 institutions. These were compared to all other "aggregated cementless tibia" (n = 7,577) and "aggregated cemented tibia" (n = 550,133) cases. Centers for Medicare & Medicaid Services data over the same time period were merged with AJRR data to determine survivorship and patient-timed incident revision rates per 1,000 years. Failure reasons were tracked during this study period. RESULTS: At 60 months, Kaplan-Meier implant survivorship was 98.9% (CI 98.7-99.0), 98.3% (CI 97.9-98.6), and 98.4% (CI 98.4-98.5) in the 3DTKA, aggregate cementless, and cemented knee cohorts, respectively (P < .0001). Patient-timed incident revision rates were 3.11 (CI 2.75-3.53), 3.99 (CI 3.34-4.76), and 3.35 (CI 3.28-3.42) for those cohorts, which corresponds to a revision rate of 0.31%, 0.40%, and 0.34% per year. CONCLUSION: In this analysis, 3DTKA had favorable survivorship and lower revision rates compared to aggregate cementless and cemented TKAs implanted from the same national database during the same time period.

Cost-Effectiveness of Cement Augmentation Versus No Augmentation for the Fixation of Unstable Trochanteric Fractures.

BACKGROUND: A previous randomized controlled trial (RCT) demonstrated a trend toward a reduced risk of implant-related revision surgery following fixation with use of a Proximal Femoral Nail Antirotation (PFNA) with TRAUMACEM V+ Injectable Bone Cement augmentation versus no augmentation in patients with unstable trochanteric fractures. To determine whether this reduced risk may result in long-term cost savings, the present study assessed the cost-effectiveness of TRAUMACEM V+ cement augmentation versus no augmentation for the fixation of unstable trochanteric fractures from the German health-care payer's perspective. METHODS: The cost-effectiveness model comprised 2 stages: a decision tree simulating clinical events, costs, and utilities during the first year after the index procedure and a Markov model extrapolating clinical events, costs, and utilities over the patient's lifetime. Sources of model parameters included the previous RCT, current literature, and administrative claims data. Outcome measures were incremental costs (in 2020 Euros), incremental quality-adjusted life-years (QALYs), and incremental cost-effectiveness ratios (ICERs). Model uncertainty was assessed with deterministic and probabilistic sensitivity analyses. RESULTS: The base-case analysis showed that fixation with cement augmentation was the dominant strategy as it was associated with cost savings (€50.3/patient) and QALY gains (0.01 QALY/patient). Major influential parameters for the ICER were the utility of revision, rates of revision surgery within the first year after fixation surgery, and the costs of augmentation and revision surgery. Probabilistic sensitivity analyses demonstrated that estimates of cost savings were more robust than those of increased QALYs (66.4% versus 52.7% of the simulations). For a range of willingness-to-pay thresholds from €0 to €50,000, the probability of fixation with cement augmentation being cost-effective versus no augmentation remained above 50%. CONCLUSIONS: Fixation with use of cement augmentation dominated fixation with no augmentation for unstable trochanteric fractures, resulting in cost savings and QALY gains. Given the input parameter uncertainties, future analyses are warranted when long-term costs and effectiveness data for cement augmentation are available. LEVEL OF EVIDENCE: Economic and Decision Analysis Level II . See Instructions for Authors for a complete description of levels of evidence.

AOSRV: Development and preliminary performance assessment of a new robotic system for autonomous percutaneous vertebroplasty.

BACKGROUND: Percutaneous vertebroplasty (PVP) is one of the most effective treatments for patients with vertebral fracture that need surgical treatment, and surgical robotics are promising tools to provide surgeons with improved precision, surgical efficiency and reduce radiation exposure. However, there are currently few robotics that are developed to help assist with PVP. METHODS: A new spinal surgical robotic system 'AOSRV' for autonomous vertebral puncture and bone cement injection was designed and customised in this study. To investigate its practical abilities and the advantages, we performed single-segment/double-segment PVP simulation surgeries on pig spinal specimens manually and using AOSRV. RESULTS: By contrast with the freehand group (FG) in single-segment (SS)/double-segment (DS) surgery, the robotic group (RG) was superior in the operation time (RGSS = 21.14 ± 4.11 min, FGSS = 33.17 ± 6.83 min; RGDS = 42.39 ± 7.31 min, FGDS = 62.86 ± 20.39 min), puncture adjustments (RGSS = 2.30 ± 1.77, FGSS = 14.86 ± 5.46; RGDS = 3.91 ± 1.76, FGDS = 20.00 ± 7.76), intraoperative fluoroscopies (RGSS = 4.10 ± 1.52, FGSS = 20.57 ± 5.44; RGDS = 7.82 ± 1.40, FGDS = 25.91 ± 7.23) and bone cement leakage rate (RGSS = 30%, FGSS = 71.4%; RGDS = 38.6%, FGDS = 83.3%). CONCLUSIONS: AOSRV was successfully developed and had a promising preliminary performance. An innovative attempt was made for the blank space of the autonomous vertebroplasty surgical robotics, and it may shed a light on more promising applications in the future.

Antibiotic cement-coated intramedullary nail is cost-effective for the initial treatment of GAâ ¢ open tibia fractures.

OBJECTIVE: To evaluate the cost-effectiveness of antibiotic cement-coated intramedullary nails (IMN) in the initial management of Gustilo-Anderson type Ⅲ (GAIII) open tibia fractures. METHODS: A break-even equation was used to analyze the costs associated with antibiotic cement-coated IMN and postoperative infection following GAⅢ open tibia fractures. This equation produced a new infection rate, which defines what percentage the antibiotic coated IMN needs to decrease the initial infection rate for its prophylactic use to be cost-effective. The postoperative infection rate used for calculations was 30%, a value established in current literature for these fracture types (6-33%). The institutional costs associated with a single operative debridement and resultant inpatient stay and treatment were determined. A sensitivity analysis was conducted to demonstrate how various total costs of infection and different infection rates affected the break-even rate, the absolute risk reduction (ARR), and the number needed to treat (NNT). RESULTS: Financial review yielded an average institutional cost of treating a postoperative infection to be $13,282.85. This number was inclusive of all procedures during an inpatient stay. The added cost of the antibiotic coated implant to the hospital is $743.42. Utilizing the break-even formula with these costs and a 30% initial infection rate, antibiotic coated IMN was economically viable if it decreased infection rate by 0.056% (NNT = 1,785.714). CONCLUSION: This break-even analysis model suggests the initial use of an antibiotic coated IMN in the setting of GAⅢ open tibia fractures is cost-effective.

Cost-utility analysis of cemented hemiarthroplasty versus hydroxyapatite-coated uncemented hemiarthroplasty for the treatment of displaced intracapsular hip fractures : the World Hip Trauma Evaluation 5 (WHiTE 5) trial.

AIMS: The aim of this study was to compare the cost-effectiveness of cemented hemiarthroplasty (HA) versus hydroxyapatite-coated uncemented HA for the treatment of displaced intracapsular hip fractures in older adults. METHODS: A within-trial economic evaluation was conducted based on data collected from the World Hip Trauma Evaluation 5 (WHiTE 5) multicentre randomized controlled trial in the UK. Resource use was measured over 12 months post-randomization using trial case report forms and participant-completed questionnaires. Cost-effectiveness was reported in terms of incremental cost per quality-adjusted life year (QALY) gained from the NHS and personal social service perspective. Methodological uncertainty was addressed using sensitivity analysis, while decision uncertainty was represented graphically using confidence ellipses and cost-effectiveness acceptability curves. RESULTS: The base-case analysis showed that cemented implants were cost-saving (mean cost difference -£961 (95% confidence interval (CI) -£2,292 to £370)) and increased QALYs (mean QALY difference 0.010 (95% CI 0.002 to 0.017)) when compared to uncemented implants. The probability of the cemented implant being cost-effective approximated between 95% and 97% at alternative cost-effectiveness thresholds held by decision-makers, and its net monetary benefit was positive. The findings remained robust against all the pre-planned sensitivity analyses. CONCLUSION: This study shows that cemented HA is cost-effective compared with hydroxyapatite-coated uncemented HA in older adults with displaced intracapsular hip fractures. Cite this article: Bone Joint J 2022;104-B(8):922-928.

The pregnant surgical trainee: Current exposures and risk factors a review.

More women are choosing a career in surgery, many of whom plan to have children during their residency and fellowship training. However, women still face perceived physical and psychological barriers to childbearing during training. In this article we review the risks of surgical exposures such as bloodborne disease, radiation, bone cement, physical labor and fatigue, and emotional stressors for the pregnant resident. Cultural barriers for pregnant residents persist, including biased comments or resentment from colleagues or attendings. Parental leave policies are inconsistent among programs and specialties. This article is intended to empower female residents and program faculty to make informed decisions and policies to support trainees, encourage diversity, and keep surgical programs competitive among top applicants.

Early failure of cement with loosening and dislocation of the femoral component in a unicompartmental knee replacement: a case report with microscopic assessment.

Background Medial unicompartimental knee artrhoplasty (UKA) is a valuable and well-known option in the treatment of medial osteoarthritis (OA). Early recovery and good results are usually reported. Failure mechanism include septic and mechanical loosening, bearing dislocation and lateral or patello-femoral joint OA evolution. The rare case of an atraumatic dislocation of the cemented femoral component of a UKA is presented together with a literature review and a microscopic analysis of the loosened component. Methods The case of a 60-years old man who suffered a UKA failure due to a complete loosening and migration of the cemented femoral component 5 months after its implantation is reported. A review of the literature pertaining early similar catastrophic failures is discussed. Furthermore a stereo-microscopic and scanning electronic microscopic evaluation of the femoral component was performed. Results A UKA-to-TKA revision was performed. Septic loosening was ruled out and one-year follow up showed patient satisfaction with good clinical and radiographic results. Few cases of complete dislocation of the UKA femoral component are reported in the literature. Macro- and microscopic evaluation showed an almost completely smooth surface at the cemented surface of the posterior condyle of the femoral component.   Conclusions Whilst mobile bearing dislocation is a well-known complication of UKA, few cases of this potentially catastrophic complication are reported in the literature. Early UKA failure with complete implant loosening may be determined by a suboptimal cementing technique with inadequate cement penetration into the trabecular bone. In the present case, the absence of cement penetration into the posterior condyle may be one of the reason of the component dislocation after standing up starting with the knee in a highly flexed position.