Comparative assessment of sacral screw loosening augmented with PMMA versus a calcium triglyceride bone cement.

STUDY DESIGN: A calcium triglyceride bone cement (CTBC) was compared with the gold-standard polymethylmethacrylate (PMMA) to assess the stability of augmented sacral screw fixation under cyclic loading. OBJECTIVE: To determine whether CTBC augmentation of a pedicle screw would provide a similar level of fixation in the S1 pedicles compared with PMMA augmentation. SUMMARY OF BACKGROUND DATA: Numerous studies have shown the advantages of using PMMA to augment screw fixation; however, its biomechanical properties are not ideal. CTBC offers potential benefits such as being low exothermic, a modulus of elasticity closer to bone, and the potential for osteoconductivity, but its comparative performance in this situation has not been previously evaluated. METHODS: Six cadaveric sacra were used in this study; 3.0 mL volumes of PMMA (Simplex P) and CTBC (Kryptonite™ Bone Cement) were injected into contralateral screw tracts, with the screw immediately inserted after cement injection. After a 12-hour setting period, the sacrum was potted in a custom fixture and mounted to the frame of a materials testing machine. Alternating flexion and extension bending moments were applied at 1 Hz. Flexion moments were applied starting at 0.5 Nm and increased by 1 Nm after every 1000 cycles until the screw had reached 6° of rotation relative to its starting position. Extension moments were maintained at 0.5 Nm. Screw rotation relative to bone was determined in real time by a custom optical tracking system and was analyzed using two-way repeated-measures analyses of variance (ANOVAs) and post hoc Student-Newman-Keuls tests (α = 0.05). RESULTS: To reach 6° of screw rotation, the PMMA-augmented screw required more loading cycles (15,464 ± 2526 vs. 10,277 ± 1762 cycles; P = 0.006) and a larger applied moment (15.3 ± 2.2 vs. 10.5 ± 1.7 Nm; P = 0.010) than CTBC-augmented screw. CONCLUSION: The PMMA augmentation provided increased resistance to cyclic loading compared with the CTBC augmentation for sacral pedicle screw fixation, but both augmentations well exceeded previously published findings for nonaugmented screws.

Radiographic assessment of the cement mantle thickness of the femoral stem in total hip replacement: a case study of 112 consecutive implants.

The results are reported of a radiographic study of cement mantle thickness in 112 consecutive primary hip replacements. Measurements were made by three observers of the apparent cement thickness medially and laterally using standard anterior-posterior radiographs. The average cement thickness was 3.2 mm, which is 1.2 mm greater than the size difference between the broach and the prosthesis, and was in the range 2-5 mm in 67 per cent of all measurement points. This has significance for the design of instrumentation to prepare the femoral cavity to give a defined cement mantle thickness. There was a greater cement mantle thickness proximally than distally. In 95 cases it was possible to determine the orientation of the stem within the cement mantle, which showed an even distribution between varus and valgus orientation; 49 per cent were within 1 degree of neutral and only one case was more than 5 degrees from neutral.

A biomechanical evaluation and assessment of the accuracy of reduction of two methods of acetabular osteotomy fixation in dogs.

OBJECTIVE: To compare the accuracy of reduction, biomechanical characteristics, and mode of failure of two methods of acetabular osteotomy repair. STUDY DESIGN: Acetabular osteotomies were created in 16 paired hemipelves and stabilized with a screw/wire/polymethylmethacrylate composite fixation technique (SWP) or a 2-mm veterinary acetabular plate (VAP). Eight intact hemipelves were used as controls. SAMPLE POPULATION: Twelve canine cadavers. METHODS: Accuracy of osteotomy reduction was evaluated grossly and by measurement of articular incongruencies formed in polyvinylsiloxane impression casts. Acetabula were loaded in modified bending until failure using a universal testing machine. Data from load-deformation curves were used to determine the biomechanical characteristics of the repaired and intact acetabula. Mode of failure was evaluated grossly and radiographically. RESULTS: Osteotomy reduction was superior in acetabula stabilized with SWP. Mean values +/- standard deviation for load at failure and stiffness of the intact acetabula were 2,796 +/- 152.9 N and 267.5 +/- 61.9 N/mm. Corresponding values for SWP and VAP were 1,192 +/- 202.7 N and 136.3 +/- 76.5 N/mm, and 1.100.5 +/- 331.6 N and 110.0 +/- 51.3 N/mm, respectively. The mean load at failure and stiffness of intact acetabula was significantly greater than acetabula stabilized with SWP or VAP. There was no significant difference between SWP and VAP for load at failure or stiffness. Failure of acetabula stabilized with SWP occurred by fracture of the polymethylmethacrylate and ventrolateral bending of the wires. Acetabula stabilized with VAP failed by ventrolateral twisting of the plate and bending of the caudal screws. CONCLUSIONS: SWP and VAP provide comparable rigidity, however, the SWP facilitates more accurate osteotomy reduction. CLINICAL RELEVANCE: These findings support the use of the SWP technique as an alternative method of acetabular fracture repair.

Prostheses for primary total hip replacement. A critical appraisal of the literature.

Eighty-one published papers on the performance of prostheses in total hip replacement were appraised. Sound methodology was demonstrated in 1 of 8 randomized controlled trials and 4 of 17 nonrandomized comparative studies. Of 56 case series without controls, 32 met the appraisal criteria, but these are intrinsically less useful. The published literature does not provide solid evidence for the superiority of cement-free or hybrid prostheses over modern cemented types.