Rapid assessment of soil accessible Cr(â ¥) in the field by a portable RGB color sensor.

Field rapid determination of soil accessible Cr(Ⅵ) is of great significance for on-site assessment and decision-making about the health risks of contaminated sites. When the thickness of solutions with various concentrations of Cr(Ⅵ) is constant, there would be a quantitative relationship between the chromogenic difference of Cr(Ⅵ) solutions and the concentration of Cr(Ⅵ). The chromogenic difference could be described by Red (R), Green (G), Blue (B) values. Based on the chromogenic reaction between 1,5-diphenylcarbazide and Cr(Ⅵ), this study first established the calibration curve between the chromogenic difference and the concentration of Cr(Ⅵ) in standard solution with or without 0.01 M CaCl2, using an RGB color sensor. This is the subsequent determination basis of the method for rapidly assessing accessible Cr(Ⅵ) in the field (M-RGB). Then, the concentration of accessible Cr(Ⅵ) of contaminated soil with "hand-shaking + standing" field extraction method was compared with "end-over-end shaking" laboratory extraction method. Finally, the accessible Cr(Ⅵ) of contaminated soil extractants was determined via M-RGB integrating the field extraction method. Results indicated there was a highly significant linear relationship between colorimetric difference value (∆E) and Cr(Ⅵ) concentration in the range of 0.1-3 mg/L (R2 > 0.99, P < 0.01), based on the Euclidean formula for calculating ∆E. The "hand-shaking + standing" field extraction method was effective in obtaining accessible Cr(Ⅵ) extractants with or without 0.01 M CaCl2, with the high extraction efficiency within 100±1%. The concentrations of accessible Cr(Ⅵ) in various polluted soils determined by M-RGB were consistent with that determined by the ultraviolet-visible spectrophotometry, with the relative error within ±5%, and the relative standard deviation ≤ 20%. The spiked recovery experiments showed that the recovery of M-RGB was between 95% and 105%, which means M-RGB could realize the trace analysis for accessible Cr(Ⅵ) in the field.

Enhanced adsorption of Congo red from urea/calcium chloride co-modified biochar: Performance, mechanisms and toxicity assessment.

Adsorbents with excellent physicochemical properties and green synthetic routes are desired for efficient removal of Congo red (CR) wastewater. Hence, a novel approach was proposed within this work. Biochar NCBC obtained from Medulla Tetrapanacis was synthesized through co-modification with urea/calcium chloride. NCBC exhibited an enormous surface area (750.09 m2/g) and a micro-mesoporous composite structure. Higher nitrogen content was detected on the surface of NCBC (8.17%) compared to that of urea directly modified biochar (4.63%). Nitrogen observed on the surface of NCBC was presented as graphitic N, pyrrolic N, amine N as well as pyridinic N. Kinetic and isothermal investigations revealed the active sites on NCBC to be homogeneous and bind to CR mainly by chemisorption. Calculated maximum sorption of CR on NCBC was 2512.82 mg/g basing on Langmuir model. Moreover, the practicality of NCBC was further proved by the cultivation of Nelumbo nucifera Gaertn. and Penicillium.

High-throughput assessment identifying major platelet Ca2+ entry pathways via tyrosine kinase-linked and G protein-coupled receptors.

In platelets, elevated cytosolic Ca2+ is a crucial second messenger, involved in most functional responses, including shape change, secretion, aggregation and procoagulant activity. The platelet Ca2+ response consists of Ca2+ mobilization from endoplasmic reticulum stores, complemented with store-operated or receptor-operated Ca2+ entry pathways. Several channels can contribute to the Ca2+ entry, but their relative contribution is unclear upon stimulation of ITAM-linked receptors such as glycoprotein VI (GPVI) and G-protein coupled receptors such as the protease-activated receptors (PAR) for thrombin. We employed a 96-well plate high-throughput assay with Fura-2-loaded human platelets to perform parallel [Ca2+]i measurements in the presence of EGTA or CaCl2. Per agonist condition, this resulted in sets of EGTA, CaCl2 and Ca2+ entry ratio curves, defined by six parameters, reflecting different Ca2+ ion fluxes. We report that threshold stimulation of GPVI or PAR, with a variable contribution of secondary mediators, induces a maximal Ca2+ entry ratio of 3-7. Strikingly, in combination with Ca2+-ATPase inhibition by thapsigargin, the maximal Ca2+ entry ratio increased to 400 (GPVI) or 40 (PAR), pointing to a strong receptor-dependent enhancement of store-operated Ca2+ entry. By pharmacological blockage of specific Ca2+ channels in platelets, we found that, regardless of GPVI or PAR stimulation, the Ca2+ entry ratio was strongest affected by inhibition of ORAI1 (2-APB, Synta66) > Na+/Ca2+ exchange (NCE) > P2×1 (only initial). In contrast, inhibition of TRPC6, Piezo1/2 or STIM1 was without effect. Together, these data reveal ORAI1 and NCE as dominating Ca2+ carriers regulating GPVI- and PAR-induced Ca2+ entry in human platelets.

Assessment of Cd Pollution in Paddy Soil-Rice System in Silver Mining-Affected Areas: Pollution Status, Transformation and Health Risk Assessment.

Mining activities are one of the main contamination sources of Cd in soil. However, the information about the influence of silver mining on Cd pollution in soil in mining-affected areas is limited. In the present study, sixteen paired soil and rice grain samples were collected from the farmland along the Luxi River nearby a silver mine in Yingtan City, Jiangxi Province, China. The total, bioavailable, and fraction of Cd in soil and Cd content in rice grain were determined by inductively coupled plasma mass spectrometry. The transformation of Cd in the soil-rice system and potential health risk via consumption of these rice grains were also estimated. The results showed that Cd concentration in these paddy soils ranged from 0.21 to 0.48 mg/kg, with the mean Cd concentration (0.36 mg/kg) exceeded the national limitation of China (0.3 mg/kg, GB 15618-2018). Fortunately, all these contaminated paddy soils were just slightly polluted, with the highest single-factor pollution index value of 1.59. The DTPA- and CaCl2-extractable Cd in these paddy soils ranged from 0.16 to 0.22 mg/kg and 0.06 to 0.11 mg/kg, respectively, and the acid-soluble Cd occupied 40.40% to 52.04% of the total Cd, which was the highest among different fractions. The concentration of Cd in rice grain ranged from 0.03 to 0.39 mg/kg, and the mean Cd concentration in rice grain (0.16 mg/kg) was within the national limitation of China (0.2 mg/kg, GB 2762-2017). The bioaccumulation factor of Cd in rice grain ranged from 0.09 to 1.18, and its correlation with various indicators was nonsignificant (p < 0.05). Health risk assessment indicated that the noncarcinogenic risk for local rice consumers was within the acceptable range, but the carcinogenic risk (CR) was ranging from 1.24 × 10-2 to 1.09 × 10-3 and higher than the acceptable range (1.0 × 10-4), indicating that the local rice consumers suffered serious risk for carcinogenic diseases. The results of the present study can provide reference for safety production of rice in silver mining-affected areas.

Calcium Chloride Toxicology for Food Safety Assessment Using Zebrafish (Danio rerio) Embryos.

The salt calcium chloride (CaCl2) is widely used in industry as a food additive; levels for human consumption are regulated by international or governmental agencies. Generally, the food industry relies on toxicity studies conducted in mammals such as mice, rats, and rabbits for determining food safety. However, testing in mammals is time-consuming and expensive. Zebrafish have been used in a range of toxicological analyses and offer advantages with regard to sensitivity, time, and cost. However, information in not available with regard to whether the sensitivity of zebrafish to CaCl2 is comparable to the concentrations of CaCl2 used as food additives. The aim of this study was to compare the CaCl2 tolerance of zebrafish embryos and larvae with concentrations currently approved as food additives. Acute toxicity, embryotoxicity, cardiotoxicity, and neurotoxicity assays were used to determine the threshold toxic concentration of CaCl2 in zebrafish embryos and larvae. The data showed that doses above 0.4% had toxic effects on development and on the activity of the cardiac and neuronal systems. Furthermore, all embryos exposed to 0.8 and 1.6% of CaCl2 died after 24 hpf. These findings are consistent with the limits of CaCl2 concentrations approved by Codex Alimentarius. Therefore, zebrafish embryos could be suitable for screening food additives.

Secondary metabolite pathway of SDG (secoisolariciresinol) was observed to trigger ROS scavenging system in response to Ca2+ stress in cotton.

Ca2+ is an essential nutrient for plants and animals which plays an important role in plant signal transduction. Although the function and regulation of mechanism of Ca2+ in alleviating various biotic and abiotic stresses in plants have been studied deeply, the molecular mechanism to adapt high Ca2+ stress is still unclear in cotton. In this study, 103 cotton accessions were germinated under 200 mM CaCl2 stress, and two extremely Ca2+-resistant (Zhong 9807, R) and Ca2+-sensitive (CRI 50, S) genotypes were selected from 103 cotton accessions. The two accessions were then germinated for 5 days in 0 mM CaCl2 and 200 mM CaCl2 respectively, after which they were sampled for transcriptome sequencing. Morphological and physiological analyses suggested that PLR2 specifically expressed in R may enhance the ability of cotton to scavenge ROS by promoting the synthesis of SDG. In conclusion, this study proposed the adaptation mechanisms to response to the high Ca2+ stress in cotton which can contribute to improve the stress resistance of cotton.

Translating wastewater reuse for irrigation from OECD Guidelines: Tramadol sorption and desorption in soil-water matrices.

Treated and untreated wastewater is often used for agricultural irrigation and, despite the many benefits of this practice, it poses the risk of biologically active chemical pollutants (such as pharmaceuticals, like tramadol) entering the environment. The partitioning of tramadol between soil/water at environmentally relevant concentrations is important to understand its environmental toxicity. Kinetics and isotherm sorption studies based on the Organisation for Economic Cooperation and Development (OECD) 106 Guideline were undertaken, ensuring comparability to previous studies. Studies were undertaken in three soils of different characteristics using aqueous concentrations of tramadol from 500 ng L-1 (environmentally relevant) to 100 µg L-1 (comparable to previous studies). Two of the soils presented a significantly (p < 0.05) higher sorption at a lower initial tramadol concentration (5000 ng L-1), compared to 20,000 ng L-1. Hysteresis was observed in all studied soils, indicating the accumulation of tramadol. Higher sorption to soils correlated with higher clay content, with soil/water partitioning coefficients (Kd) of 5.5 ± 13.3, 2.5 ± 3.8 and 0.9 ± 3.0 L kg1 for soils with clay contents of 41.9%, 24.5% and 7.4%, respectively. Cation exchange was proposed as the main sorption mechanism for tramadol to soils when the pH was below tramadol's pKa values (9.41 and 13.08). A comparative kinetics study between tramadol in soil/calcium chloride buffer and soil/wastewater effluent demonstrated significantly higher (p < 0.05) tramadol sorption to soil from wastewater effluent. This has the environmental implication that clay soils will be able to retain tramadol from irrigation water, despite the organic content of the irrigation water. Therefore, our studies show that tramadol soil sorption is likely to be higher in agricultural environments reusing wastewater than that predicted from experiments using the OECD 106 Guideline calcium chloride buffer.

Assessment of goethite-combined/modified biochar for cadmium and arsenic remediation in alkaline paddy soil.

The opposed transformation of arsenic (As) and cadmium (Cd) in paddy soil postures numerous challenges for their simultaneous remediation. An incubation study was conducted on the immobilization of Cd and As by biochar (BC), goethite (G), goethite-combined biochar (BC + G), and goethite-modified biochar (GBC). The results showed that biochar effectively immobilized Cd while significantly increasing As mobility, whereas goethite effectively immobilized As more than Cd. BC + G treatment significantly decreased toxicity characteristics leaching procedure (TCLP) and CaCl2-extractable Cd by 22.70% and 40.15%; meanwhile, TCLP and NaHCO3-As were significantly reduced by 38.25% and 31.87%, respectively, compared with the control. This study found that GBC was the optimum amendment within the immobilization efficiency for CaCl2-Cd (57.03%) and TCLP-As (61.11%). BC + G and GBC applications showed some interactions between biochar and goethite, which played an essential role in immobilizing Cd and As simultaneously. Therefore, GBC showed a great benefit in being a low-cost and efficient environmental amendment for Cd and As remediation in alkaline co-contaminated paddy soil.

Wearable Bracelet Monitoring the Solar Ultraviolet Radiation for Skin Health Based on Hybrid IPN Hydrogels.

The risk of extensive exposure of the human epidermis to solar ultraviolet radiation is significantly increased nowadays. It not only induces skin aging and solar erythema but also increases the possibility of skin cancer. Therefore, a simply prepared, highly sensitive, and optically readable device for monitoring the solar ultraviolet radiation is highly desired for the skin health management. Because of the photoinitiated polymerization triggered by graphene-carbon nitride (g-C3N4) under ultraviolet radiation, g-C3N4 is homogeneously distributed in the hybrid hydrogels containing N-isopropylacrymide (NIPAM), poly(ethylene glycol) methyl ether methacrylate (OEGMA300), and sodium alginate (SA). By further immersing the hybrid hydrogels into calcium chloride solution, hybrid alginate-Ca2+/P(NIPAM-co-OEGMA300)/g-C3N4 interpenetrating polymeric network (IPN) hydrogels are obtained. Due to the homogeneous distribution of g-C3N4 and the existence of thermoresponsive polymers, the hybrid IPN hydrogels present good adsorption capability and high degradation efficiency for methylene blue (MB) especially at high temperature under ultraviolet radiation. Based on this unique property, the bracelet monitoring skin health is prepared by simply immersing the hybrid IPN hydrogels into the MB solution and then wrapping it with PET foil. Because the immersion time for the top, middle, and bottom parts of the hybrid IPN hydrogels is gradually increased, their colors vary from light to dark blue. A longer time is required for the discoloration of the darker part under solar ultraviolet radiation. Thus, the bracelet can be used to conveniently monitor the dose of solar ultraviolet radiation by simply checking the discoloration in the bracelet under sunshine. Due to the facile preparation and low cost of the bracelet, it is a promising candidate for wearable devices for skin health management.

Fabrication of three-dimensional calcium alginate hydrogels using sacrificial templates of sugar.

Hydrogels are receiving increasing attention in bioapplications. Among hydrogels, calcium alginate (Ca-alginate) hydrogels are widely used for their biocompatibility, low toxicity, low cost, and rapid fabrication by simple mixing of Ca2+ and sodium alginate (Na-alginate). For bioapplications using hydrogels, it is necessary to construct designed hydrogel structures. Although several methods have been proposed for fabricating designed hydrogels, a simple and low-cost method is desirable. Therefore, we developed a new method using sacrificial templates of sugar structures to fabricate three-dimensional (3D) designed Ca-alginate hydrogels. In this method, Na-alginate solution is mixed with molten sugar, and the resulting highly viscous material used to mold 3D sugar structures as sacrificial templates. Since sugar constructs are easily handled compared to hydrogels, sugar templates are useful for preparing 3D constructs. Finally, the sugar and Na-alginate structure is immersed in a CaCl2 solution to simultaneously dissolve the template and form the Ca-alginate hydrogel. The resulting hydrogel takes the shape of the sugar template. By stacking and fusing various sugar structures, such as fibers and blocks, 3D designed Ca-alginate hydrogels can be successfully fabricated. This simple and low-cost method shows excellent potential for application to a variety of bioapplications.

Development of 3D Biofabricated Cell Laden Hydrogel Vessels and a Low-Cost Desktop Printed Perfusion Chamber for In Vitro Vessel Maturation.

The vascular system represents the key supply chain for nutrients and oxygen inside the human body. Engineered solutions to produce sophisticated alternatives for autologous or artificial vascular implants to sustainably replace diseased vascular tissue still remain a key challenge in tissue engineering. In this paper, cell-laden 3D bioplotted hydrogel vessel-like constructs made from alginate di-aldehyde (ADA) and gelatin (GEL) are presented. The aim is to increase the mechanical stability of fibroblast-laden ADA-GEL vessels, tailoring them for maturation under dynamic cell culture conditions. BaCl2 is investigated as a crosslinker for the oxidized alginate-gelatin system. Normal human dermal fibroblast (NHDF)-laden vessel constructs are optimized successfully in terms of higher stiffness by increasing ADA concentration and using BaCl2 , with no toxic effects observed on NHDF. Contrarily, BaCl2 crosslinking of ADA-GEL accelerates cell attachment, viability, and growth from 7d to 24h compared to CaCl2 . Moreover, alignment of cells in the longitudinal direction of the hydrogel vessels when extruding the cell-laden hydrogel crosslinked with Ba2+ is observed. It is possible to tune the stiffness of ADA-GEL by utilizing Ba2+ as crosslinker. In addition, a customized, low-cost 3D printed polycarbonate (PC) perfusion chamber for perfusion of vessel-like constructs is introduced.

Body Compatible Thermometer Based on Green Electrolytes.

With the use of coordinated complexes between aliphatic diols and calcium chloride (CaCl2) as green electrolytes, a body compatible, ecofriendly and low-cost thermometer is successfully developed. This particular conductive liquid possesses unique features of ultrafast response and high sensitivity against temperature change. The influences of CaCl2 concentration and the category of aliphatic diols on conductivity change reveal that the thermal sensing abilities of such green electrolytes are positively relevant to the viscosity change along with temperature change. Owing to the advantages of stability, reliability, and security, the thermometer can implement long-term and continuous temperature monitoring, which can fully meet the requirements of application of medical monitors, diagnostics, and therapies. Moreover, the inherent advantages of thermometers, including satisfactory biocompatibility and nontoxicity, afford great promise for applications in invasive and inflammatory devices.

In vitro performance of prefilled CO2 absorbers with the Zeus®.

Low fresh gas flows (FGFs) decrease the use of anesthetic gases, but increase CO2 absorbent usage. CO2 absorbent usage remains poorly quantified. The goal of this study is to determine canister life of 8 commercially available CO2 absorbent prepacks with the Zeus®. Pre-packed CO2 canisters of 8 different brands were tested in vitro: Amsorb Plus, Spherasorb, LoFloSorb, LithoLyme, SpiraLith, SpheraSorb, Drägersorb 800+, Drägersorb Free, and CO2ntrol. CO2 (160 mL min- 1) flowed into the tip of a 2 L breathing bag that was ventilated with a tidal volume of 500 mL, a respiratory rate of 10/min, and an I:E ratio of 1:1 using the controlled mechanical ventilation mode of the Zeus® (Dräger, Lubeck, Germany). In part I, canister life of 5 canisters each of 2 different lots of each brand was determined with a 350 mL min- 1 FGF. Canister life is the time it takes for the inspired CO2 concentration (FICO2) to rise to 0.5%. In part II, canister life was measured accross a FGF range of 0.25 to 4 L min- 1 for Drägersorb 800+ (2 lots) and SpiraLith (1 lot). In part III, the calculated canister life per 100 g fresh granule content of the different brands was compared between the Zeus and (previously published data for) the Aisys. In vitro canister life of prefilled CO2 absorber canisters differed between brands, and depended on the amount of CO2 absorbent and chemical composition. Canister life expressed as FCU0.5 (the fraction of the canister used per hour) was proportional to FGF over 0.2-2 L min-1 range only, but was non-linear with higher FGF: FCU0.5 was larger than expected with FGF > 2 L min-1, and even with FGF > minute ventilation FCU0.5 did not become zero, indicating some CO2 was being absorbed. Canister life on a per weight basis of the same brand is higher with the Zeus than the Aisys. Canister life of prefilled CO2 absorber canisters differs between brands. The FCU0.5-FGF relationship is not linear across the entire FGF range. Canister life of prepacks of the same brand for the Zeus and Aisys differs, the exact etiology of which is probably multifactorial, and may include differences in the absolute amount of absorbent and different rebreathing characteristics of the machines.

Optimization, characterization, and in vitro assessment of alginate-pectin ionic cross-linked hydrogel film for wound dressing applications.

Natural polymer-based hydrogel films have great potential for biomedical applications and are good candidates for wound dressings. In this study, we aimed to develop simvastatin-loaded crosslinked alginate-pectin hydrogel films by ionic crosslinking to improve the mechanical characteristics, wound fluid uptake and drug release behavior. Alginate-pectin hydrocolloid films were chemically crosslinked by immersing in different concentrations of CaCl2 (0.5-3% w/v) for 2-20min. The degree of crosslinking was influenced by both contact time and CaCl2 concentration. The optimized conditions for crosslinking were 0.5% and 1% (CaCl2) for 2min. The optimized hydrogel films were then characterized for their physical, mechanical, morphological, thermal, in vitro drug release, and cytocompatibility profiles. Crosslinking improved the mechanical profile and wound fluid uptake capacity of dressings. The hydrogel films were able to maintain their physical integrity during use, and the best results were obtained with the film in which the extent of crosslinking was low (0.5%). Thermal analysis confirmed that the crosslinking process enhanced the thermal stability of hydrogel films. Sustained, slow release of simvastatin was obtained from the crosslinked films and in vitro cytotoxicity assay demonstrated that the hydrogel films were non-toxic.

Assessment risk of phosphorus leaching from calcareous soils using soil test phosphorus.

Accurate estimation of phosphorus (P) leaching is important because excess P may reduce surface and ground water quality. Little attention has been paid to estimate P leaching from soil tests in calcareous soils. The relation between different soil tests P (STP), P sorption index (PSI) and degree of P saturation (DPS) and leaching of P were examined for assessing the risk of P loss from calcareous soils. Columns leaching repacked with native soils were leached with either distilled water or 10 mM CaCl2 solutions, separately. Four leaching events were performed at four days, and 28.7 mm of distilled water or 10 mM CaCl2 solutions was applied at each leaching events. Compared with distilled water, CaCl2 had a small ability to solubilize P from soils. Concentration of P in leachate in both leaching solutions was exceeding 0.1 mg l-1 associated with eutrophication. Cumulative P leached P was ranged from 0.17 to 18.59 mg P kg-1 and 0.21-8.16 mg P kg-1, when distilled water and 10 mM CaCl2 solutions were applied, respectively and it was higher in sandy clay loam soils compared with clay soils. Among evaluated environmental soil P tests, PCaCl2-3h (P extracted by 10 mM CaCl2 for 3 h), PCaCl2-1h (P extracted by 10 mM CaCl2 for 1 h) were more accurate than other soil P tests for predicting P concentration in the leachates in both leaching solutions and accounting for 83% and 72% of variation of P concentration, respectively. The water extractable P (WEP) (r = 0.771) and Olsen-P (POls)(r = 0.739) were significantly related to the leached P concentration using distilled water solution in a split line model, with a change point of 27.4 mg P kg-1 and 61.5 mg P kg-1, respectively. Various DPS were calculated and related to the leached P concentration. Based on P extracted by Mehlich-3 (PM3) and HCl (PHCl) and PSI, the change point of the relationship between leached P concentration and DPSM3-3 (PM3(PM3+PSI)×100) and DPSHCl-2 (PHCl(PHCl+PSI)×100) for both leaching solutions was approximately the same, thus a mean value of 49% for DPSM3-3 and 73% for DPSHCl-2 was obtained. Soils were grouped into four categories of increasing P leaching potential based on WEP, POls, and DPSM3-3. The results indicated that 8.00%-25.50% of the soil grouped in no risk category whereas 8.00%-13.70% of the soils fell into the high risk category.

Clinical Assessment of Histidine-Tryptophan-Ketoglutarate Solution and Modified St. Thomas' Solution in Pediatric Cardiac Surgery of Tetralogy of Fallot.

The objective of this study is to compare the myocardium protective effect of Bretschneider's histidine-tryptophan-ketoglutarate (HTK) solution versus Modified St. Thomas' (STH) solution in pediatric cardiac surgery of Tetralogy of Fallot (TOF). Seventy-seven pediatric patients of TOF who received the total surgical repair were reviewed, from January 2014 to October 2015. A horizontal comparison between HTK solution and modified STH solution has been made since the HTK solutions were started to be used in our hospital. The patients were divided into the HTK group (n = 35) and the STH group (n = 33). The perioperative values of the groups were assessed in this study. The primary endpoints including spontaneous cardiac re-beating time, intensive care unit (ICU) stay, overall stay, mechanical ventilation postoperation, postoperation stay, overall stay, and perioperative echocardiographic results were analyzed in this study. We found that spontaneous cardiac re-beating time of the HTK group was significantly shorter than that of the STH group (0.26 min ± 0.56 vs. 1.33 ± 1.02, P < 0.001). There were no significant differences between the two groups in ICU stay (P = 0.29), postoperative mechanical ventilation time (P = 0.84), overall stay (0.73); and the mortalities of the two groups were similar (2.9 vs. 3.0%). Aimed at pediatric cardiac surgery of TOF, this study suggests that with similar aorta cross-clamping time, modified STH solution is as safe as HTK solution.

ModFossa: A library for modeling ion channels using Python.

The creation and simulation of ion channel models using continuous-time Markov processes is a powerful and well-used tool in the field of electrophysiology and ion channel research. While several software packages exist for the purpose of ion channel modeling, most are GUI based, and none are available as a Python library. In an attempt to provide an easy-to-use, yet powerful Markov model-based ion channel simulator, we have developed ModFossa, a Python library supporting easy model creation and stimulus definition, complete with a fast numerical solver, and attractive vector graphics plotting.

Assessment of amendments for the immobilization of Cu in soils containing EDDS leachates.

In this study, the effectiveness of six soil amendments (ferrihydrite, manganese dioxide, gibbsite, calcium carbonate, biochar, and organic fertilizer) was investigated to assess the feasibility of minimizing possible environmental contaminant leaching during S,S-ethylenediaminedisuccinic acid (EDDS)-enhanced phytoextraction process based on 0.01-M CaCl2 extraction. Results showed that the application of EDDS could significantly increase Cu concentrations in the leaching solution. Compared with control, incorporation of six amendments (excluding organic fertilizer) significantly decreased CaCl2-extractable Cu concentrations in both soils. When EDDS-containing solutions leached from the soil columns (mimicking the upper soil layers) were added to soils with different amendments (mimicking the subsoil), CaCl2-extractable Cu in the soils amended with ferrihydrite, manganese dioxide, gibbsite, and calcium carbonate was significantly lower than that in the control soil (no amendments) and remained relatively constant during the first 14 days. Incorporation of biochar or organic fertilizer had no positive effect on the immobilization of Cu in EDDS leachates in soils. After 14 days, CaCl2-extractable Cu concentration decreased rapidly in soils incorporated with various amendments. Integrating soil washing with biodegradable chelating agents or chelant-enhanced phytoextraction and immobilization of heavy metals in subsoil could be used to rapidly reduce the concentration of bioavailable metal fractions in the upper soil layers and minimize environmental risks of secondary pollution.

Cost-effective bioregeneration of nitrate-laden ion exchange brine through deliberate bicarbonate incorporation.

Bioregeneration of nitrate-laden ion exchange brine is desired to minimize its environmental impacts, but faces common challenges, i.e., enriching sufficient salt-tolerant denitrifying bacteria and stabilizing brine salinity and alkalinity for stable brine biotreatment and economically removing undesired organics derived in biotreatment. Incorporation of 0.25 M bicarbonate in 0.5 M chloride brine little affected resin regeneration but created a benign alkaline condition to favor bio-based brine regeneration. The first-quarter sulfate-mainly enriched spent brine (SB) was acidified with carbon source acetic acid for using CaCl2 at an efficiency >80% to remove sulfate. Residual Ca(2+) was limited below 2 mM by re-mixing the first-quarter and remained SB to favor denitrification. Under [Formula: see text] system buffered pH condition (8.3-8.8), nitrate was removed at 0.90 gN/L/d by hematite-enriched well-settled activated sludge (SVI 8.5 ml/g) and the biogenic alkalinity was retained as bicarbonate. The biogenic alkalinity met the need of alkalinity in removing residual Ca(2+) after sulfate removal and in CaCl2-induced CaCO3 flocculation to remove 63% of soluble organic carbon (SOC) in biotreated brine. Carbon-limited denitrification was also operated after activated sludge acclimation with sulfide to cut SOC formation during denitrification. Overall, this bicarbonate-incorporation approach, stabilizing the brine salinity and alkalinity for stable denitrification and economical removal of undesired SOC, suits long-term cost-effective brine bioregeneration.

Metabolomic assessment reveals an elevated level of glucosinolate content in CaCl2 treated broccoli microgreens.

Preharvest calcium application has been shown to increase broccoli microgreen yield and extend shelf life. In this study, we investigated the effect of calcium application on its metabolome using ultra-high-performance liquid chromatography with mass spectrometry. The data collected were analyzed using principal component analysis and orthogonal projection to latent structural discriminate analysis. Chemical composition comparison shows that glucosinolates, a very important group of phytochemicals, are the major compounds enhanced by preharvest treatment with 10 mM calcium chloride (CaCl2). Aliphatic glucosinolates (glucoerucin, glucoiberin, glucoiberverin, glucoraphanin, pentyl glucosinolate, and hexyl glucosinolate) and indolic glucosinolates (glucobrassicin, neoglucobrassicin, and 4-hydroxyglucobrassicin) were increased significantly in the CaCl2 treated microgreens using metabolomic approaches. Targeted glucosinolate analysis using the ISO 9167-1 method was further employed to confirm the findings. Results indicate that glucosinolates can be considered as a class of compounds that are responsible for the difference between two groups and a higher glucosinolate level was found in CaCl2 treated groups at each time point after harvest in comparison with the control group.