Towards cost-effective drug discovery: Reusable immobilized enzymes for neurological disease research.

Enzyme handling and utilization bears many challenges such as their limited stability, intolerance of organic solvents, high cost, or inability to reuse. Most of these limitations can be overcome by enzyme immobilization on the surface of solid support. In this work, the recombinant form of human cholinesterases and monoamine oxidases as important drug targets for neurological diseases were immobilized on the surface of magnetic non-porous microparticles by a non-covalent bond utilizing the interaction between a His-tag terminus on the recombinant enzymes and cobalt (Co2+) ions immobilized on the magnetic microparticles. This type of binding led to targeted enzyme orientation, which completely preserved the catalytic activity and allowed high reproducibility of immobilization. In comparison with free enzymes, the immobilized enzymes showed exceptional stability in time and the possibility of repeated use. Relevant Km, Vmax, and IC50 values using known inhibitors were obtained using particular immobilized enzymes. Such immobilized enzymes on magnetic particles could serve as an excellent tool for a sustainable approach in the early stage of drug discovery.

Efficient activation of peroxymonosulfate mediated by Co(II)-CeO2 as a novel heterogeneous catalyst for the degradation of refractory organic contaminants: Degradation pathway, mechanism and toxicity assessment.

A series of Co(II)-CeO2 mixed metal oxides were synthesized by a facile hydrothermal-calcination procedure for activating peroxymonosulfate (PMS) and degrading toxic and difficult biodegradable organics. Co(II)-CeO2 showed excellent degradation performance toward rhodamine B (RhB), toluidine blue, methylene blue and diclofenac. RhB is a refractory organic contaminant, and ecotoxicological evaluation unraveled its harmfulness to the biosphere. RhB was selected as the model pollutant to investigate catalytic mechanisms. Parameters affecting degradation performance were profoundly investigated, including Co:Ce feed ratio, initial pH, PMS dosage, catalyst dosage, RhB concentration, coexisting ions and reaction temperature. Reaction mechanisms were proposed based on density functional theory calculations and identifications of reactive oxygen species. Improvements have been achieved in seven aspects compared to previous studies, including 100% degradation ratio in both real water samples and each reuse of the catalyst, ultrafast degradation rate, cost-effectiveness of the catalyst, toxicity-attenuation provided by the developed degradation method, high degree of mineralization for the model pollutant, negligible leaching of active sites, and the enhancement of catalytic performance by utilizing trace leached cobalt, endowing the technique with broad applicability and prospect.

Garlic peel as promising low-cost support for the cobalt nanocatalyst; synthesis and catalytic studies.

The development of cost-effective and applied catalysts for organic pollutants degradation is the cornerstone for the future valorizations of these hazardous wastes. Garlic peel was employed as solid support for the assembly of cobalt nanoparticles and was further applied for the catalytic degradation of 4-nitrophenol, bromophenol blue, and a mixture of both. A Cobalt@garlic peel nanocomposite with the morphology of semi-spherical and randomly distributed nanoparticles was prepared without the aid of any hazardous chemicals. The functional groups facilitated the adsorption of cobalt ions onto the surface of garlic peel through van der Waals forces and/or hydrogen bonds. The catalytic experiments were carried out under different operational parameters including pollutant concentration, catalytic dosage, and pH value to identify the optimal conditions for the model solutions. The results showed that the optimal pH for 4-nitrophenol degradation was around 9 and the maximum rate constant 4.56 × 10-3 sec-1. The most prominent feature of the proposed catalyst is the easy/efficient recovery and recycling of the nanoparticles from the reacting medium. This work provided a simple method for designing other similar biomass-stabilized nanocatalysts which might sharply reduce the catalytic treatment costs and broaden the scope of applications.

Construction of Confined Bifunctional 2D Material for Efficient Sulfur Resource Recovery and Hg2+ Adsorption in Desulfurization.

Substantial energy penalty of valuable sulfate recovery restricts the efficiency of wet desulfurization and increases the risk of Hg0 reemission. Although the enhanced sulfite oxidation rate with cobalt-based materials can increase the energy efficiency, inactivation and poisoning of catalyst due to the competition of reactant must be addressed. Here we obtained a superwetting two-dimensional cobalt-nitrogen-doped carbon (2D Co-N-C) nanosheet featuring confined catalysis/adsorption sites for the energy-efficient sulfite oxidation and Hg2+ adsorption. The designed structure exhibits enhanced surface polarity, availability and short reactant diffusion path, thus enabling the significant catalytic TOF value of 0.085 s-1 and simultaneous mercury removal ability of 143.26 mg·g-1. The catalyst nanosheets present regenerating stabilities to improve cost-efficiency. By deployment of the Co-N-C catalysts, a marked reduction of heat penalty up to 69% can be achieved, which makes this catalytic pathway for sulfur resource recovery economically feasible in real industry scenario.

Renewable and robust biomass waste-derived Co-doped carbon aerogels for PMS activation: Catalytic mechanisms and phytotoxicity assessment.

Developing monolithic carbon-based catalyst with low cost, easy separation and high performance to degrade pollutants via PMS activation is crucial. In this work, a series of novel monolithic Me-CA catalysts based on biomass derived carbon aerogel were prepared by hydrothermal method using waste watermelon peel as raw material. Co-CA catalyst showed excellent performance to activate PMS for 2, 4-DCP degradation in different temperature and different water matrices. Different pollutants, such as ciprofloxacin (CIP), bisphenol A (BPA), and 2, 4-dichlorophenoxyacetic acid (2, 4-D) could also be removed in the Co-CA/PMS system. As expected, Co-CA could be easily separated from degraded solution, and show high stability and reusability for PMS activation with a lower cobalt leaching. Based on the results of the quenching tests, electron paramagnetic resonance (EPR) spectra, Chronoamperometric test (i-t curves) and electro-chemical impedance spectroscopy (EIS), the PMS activation mechanism was proposed. The phytotoxicity assessment determined by germination situation of mung bean indicated that PMS activation could eliminate the hazards of 2, 4-D. Therefore, this study provides a low cost, efficient and environmental-friendly monolithic biomass carbon aerogel catalyst for different pollutants degradation, which further advances monolithic catalyst for practical wastewater treatment.

Assessment of Melamine in Different Water Samples with ZnO-doped Co3 O4 Nanoparticles on a Glassy Carbon Electrode by Differential Pulse Voltammetry.

In this investigation, a melamine electrochemical sensor has been developed by using wet-chemically synthesized low-dimensional aggregated nanoparticles (NPs) of ZnO-doped Co3 O4 as sensing substrate that were decorated onto flat glassy carbon electrode (GCE). The characterization of NPs such as UV-Vis, FTIR, XRD, XPS, EDS, and FESEM was done for detailed investigations in optical, functional, structural, elemental, and morphological analyses. The ZnO-doped Co3 O4 NPs decorated GCE was used as a sensing probe to analyze the target chemical melamine in a phosphate buffer at pH 5.7 by applying differential pulse voltammetry (DPV). It exhibited good performances in terms of sensor analytical parameters such as large linear dynamic range (LDR; 0.15-1.35 mM) of melamine detection, high sensitivity (80.6 µA mM-1 cm-2 ), low limit of detection (LOD; 0.118±0.005 mM), low limit of quantification (LOQ; 0.393 mM), and fast response time (30 s). Besides this, the good reproducibility (in several hours) and repeatability were investigated under identical conditions. Moreover, it was implemented to measure the long-time stability, electron mobility, less charge-transfer resistance, and analyzed diffusion-controlled process for the oxidation reaction of the NPs assembled working GCE electrode, which showed outstanding chemical sensor performances. For validation, real environmental samples were collected from various water sources and investigated successfully with regard to the reliability of the selective melamine detection with prepared NPs coated sensor probe. Therefore, this approach might be introduced as an alternative route in the sensor technology to detect selectively unsafe chemicals by an electrochemical method with nanostructure-doped materials for the safety of environmental, ecological, healthcare fields in a broad scale.

In vitro and in vivo genotoxicity assessment of ferric ferrocyanide and potassium-cobalt ferrocyanide.

Ferric hexacyanoferrate(II) (Fe4[Fe(CN)6]3), i.e. Prussian blue (PB) has been used for many years to remove from the body the two toxic isotopes of cesium and thallium following irradiation. Recently, potassium cobalt hexacyanoferrate(II) (K2COFe(CN)6), which has shown a better efficacy for decontamination, is also being considered for use to enhance the elimination of cesium isotopes. In view to its preclinical and clinical development, in vitro and in vivo GLP-compliant genotoxicity studies were carried out on this product as well as on PB for comparison. Several tests dissecting the main events leading to genotoxicity, i.e. mutagenicity and chromosomal aberrations, both structural and quantitative were implemented. In vitro, no mutagenic effect was observed in the Ames test but both compounds were positive in the mouse lymphoma assay on TK locus and induced clastogenic effects in the in vitro chromosomal aberrations test on human lymphocytes, either in absence or in presence of metabolic activation. K-Co-ferrocyanide was also assayed in vivo in the mouse bone marrow micronucleus assay and PB was assessed for DNA fragmentation in the rodent Comet assay in both glandular stomach and colon. In the in vivo micronucleus mouse bone marrow, K-Co-ferrocyanide did not display any genotoxic activity up to 2000 mg/kg/d (x2) by oral route. In opposite, PB induced a significant increase in DNA fragmentation both in the glandular stomach and in the colon of rat treated 3 times with intake ranging from 2000 to 500 mg/kg. PB should be considered as an in vivo mutagen as well as Potassium cobalt hexacyanoferrate(II) since the in vitro genotoxicity profiles of both ferrocyanides are quite similar. Their use as cesium/ thallium decontamination agents in human should be assessed following a benefit/risk approach to enable a robust decision-making.

Cobaltaelectro-catalyzed C-H activation for resource-economical molecular syntheses.

The direct cleavage of otherwise inert C-H bonds has emerged as a sustainable approach for organic synthesis; in contrast to other approaches, these reactions result in the formation of fewer undesired by-products and do not require pre-functionalization steps. In recent years, oxidative C-H/N-H alkyne annulations and C-H oxygenations were realized by 3d metals. Unfortunately, most of these reactions require stoichiometric amounts of often toxic chemical oxidants. This protocol provides a general method for cobaltaelectro-catalyzed C-H activations of benzamides. Here, anodic oxidation obviates the need for a chemical oxidant and uses 10-20% of a more environmentally benign, inexpensive catalyst. We outline a detailed and precise description of the designed electrolytic cell for metallaelectrocatalysis, including readily available electrode materials and electrode holders. The custom-made device is further compared with the commercially available and standardized ElectraSyn 2.0 electrochemistry kit. As example applications of this approach, we describe cobaltaelectro-catalyzed C-H activation protocols for the direct C-H oxygenation of benzamides and resource-economical synthesis of isoquinolones. The cobaltaelectrocatalysis setup and reaction take about 17 h, while an additional 5 h have to be anticipated for workup and chromatographic purification. The methods described herein feature broad functional group tolerance, operational simplicity, low waste-product formation and an overall exceptional level of resource economy.

In vitro assessment of cobalt oxide particle dissolution in simulated lung fluids for identification of new decorporating agents.

Inhalation of 60Co3O4 particles may occur at the work place in nuclear industry. Their low solubility may result in chronic lung exposure to γ rays. Our strategy for an improved therapeutic approach is to enhance particle dissolution to facilitate cobalt excretion, as the dissolved fraction is rapidly eliminated, mainly in urine. In vitro dissolution of Co3O4 particles was assessed with two complementary assays in lung fluid surrogates to mimic a pulmonary contamination scenario. Twenty-one molecules and eleven combinations were selected through an extensive search in the literature, based on dissolution studies of other metal oxides (Fe, Mn, Cu) and tested for dissolution enhancement of cobalt particles after 1-28 days of incubation. DTPA, the recommended treatment following cobalt contamination did not enhance 60Co3O4 particles dissolution when used alone. However, by combining molecules with different properties, such as redox potential and chelating ability, we greatly improved the efficacy of each drug used alone, leading for the highest efficacy, to a 2.7 fold increased dissolution as compared to controls. These results suggest that destabilization of the particle surface is an important initiating event for a good efficacy of chelating drugs, and open new perspectives for the identification of new therapeutic strategies.

Development and Assessment of Nano-Technologies for Cancer Treatment: Cytotoxicity and Hyperthermia Laboratory Studies.

Cancer treatment by magnetic hyperthermia offers numerous advantages, but for practical applications many variables still need to be adjusted before developing a controlled and reproducible cancer treatment that is bio-compatible (non-damaging) to healthy cells. In this work, Fe3O4 and CoFe2O4 were synthesized and systematically studied for the development of efficient therapeutic agents for applications in hyperthermia. The biocompatibility of the materials was further evaluated using HepG2 cells as biological model. Colorimetric and microscopic techniques were used to evaluate the interaction of magnetic nano-materials (MNMs) and HepG2 cells. Finally, the behavior of MNMs was evaluated under the influence of an alternating magnetic field (AMF), observing a more efficient temperature increment for CoFe2O4, a desirable behavior for biomedical applications since lower doses and shorter expositions to alternating magnetic field might be required.

Electrospinning synthesis and assessment of physicochemical properties and biocompatibility of cobalt nitrate fibers for wound healing applications.

The aim of this study was to develop polyurethane (PU) wound dressing incorporated with cobalt nitrate using electrospinning technique. The morphology analysis revealed that the developed composites exhibited reduced fiber and pore diameter than the pristine PU. The electrospun membranes exhibited average porosity in the range of 67% - 71%. Energy-dispersive X-ray spectra (EDS) showed the presence of cobalt in the PU matrix. The interaction of cobalt nitrate with PU matrix was evident in Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The contact angle results indicated the improved wettability of the prepared PU/cobalt nitrate composites (82° ± 2) than the pure PU (100° ± 1). The incorporation of cobalt nitrate into the PU matrix enhanced the surface roughness and mechanical strength as evident in the atomic force microscopy (AFM) and tensile test analysis. The blood compatibility assays revealed the anticoagulant nature of the prepared composites by displaying prolonged blood clotting time than the PU control. Further, the developed composite exhibited less toxicity nature as revealed in the hemolysis and cytotoxicity studies. It was observed that the PU wound dressing added with cobalt nitrate fibers exhibited enhanced physicochemical, better blood compatibility parameters and enhanced fibroblast proliferation rates which may serve as a potential candidate for wound dressings.

Metal-organic framework derived carbon-based sensor for monitoring of the oxidative stress of living cell and assessment of antioxidant activity of food extracts.

A novel non-enzymatic superoxide anion radical (O2•-) sensor was prepared by silver nanoparticles (AgNPs) decorated organic frameworks (MOFs) compound-derived metal oxide coated carbon material. Transmission electron microscopy (TEM) was employed to characterize morphologies and structures of the as-prepared samples AgNPs/Co3O4@C. Electrochemical studies indicated that the AgNPs/Co3O4@C/GCE exhibited excellent detection ability to O2•-. It offered a linear range of 8 orders of magnitude and a super low detection limits of 0.0564 pM. The sensor was successfully adapted to detection of O2•- released from living cells. Furthermore, the capacities of scavenging O2•- of food antioxidants were also studied by electrochemical method at cellular milieu. Accordingly, this work provided tremendous potential for reduction incidence of oxidative stress by intaking food antioxidants.

Peptides as biosorbents - Promising tools for resource recovery.

Despite many innovations, meeting both economic and ecological requirements remains challenging for conventional resource recovery technology. The development of highly selective peptides puts a new competitor on the market. We present an approach to identify peptides for resource recovery using Phage Surface Display. Here, we describe the development of peptides for binding of rare earth element terbium-containing solids and for removal and enrichment of the heavy metal ions of cobalt and nickel out of waste waters and leaching solutions. We identified phage displaying specific peptides with ∼100× enhanced affinity towards terbium-containing solids or ∼20× enhanced affinity towards nickel (∼3× cobalt).

Toxicity assessment of cobalt ferrite nanoparticles on wheat plants.

Cobalt ferrite nanoparticles (NPs) have received increasing attention due to their widespread therapeutic and agricultural applicability. In the environmental field, dry powder- and ferrofluid-suspended cobalt ferrite NPs were found to be useful for removing heavy metals and metalloids from water, while diluted suspensions of cobalt ferrite NP have been promisingly applied in medicine. However, the potential toxicological implications of widespread exposure are still unknown. Since cobalt ferrite NPs are considered residual wastes of environmental or medical applications, plants may serve as a point-of-entry for engineered nanomaterials as a result of consumption of these plants. Thus, the aim of this study was to assess the effects of dry powder and fresh cobalt ferrite NP on wheat plants. Seven-day assays were conducted, using quartz sand as the plant growth substrate. The toxicity end points measured were seed germination, root and shoot lengths, total cobalt (Co) and iron (Fe) accumulation, photosynthetic pigment production, protein (PRT) production, and activities of catalase (CAT), ascorbate peroxidase (APX), and guaiacol peroxidase (GPX). Increasing total Co and Fe in plant tissues indicated that wheat plants were exposed to cobalt ferrite NP. Seed germination and shoot length were not sufficiently sensitive toxicity end points. The effective concentration (EC50) that diminished root length of plants by 50% was 1963 mg/kg for fresh ferrite NPs and 5023 mg/kg for powder ferrite NP. Hence, fresh ferrite NPs were more toxic than powder NP. Plant stress was indicated by a significant decrease in photosynthetic pigments. CAT, APX, and GPX antioxidant enzymatic activity suggested the generation of reactive oxygen species and oxidative damage induced by cobalt ferrite NP. More studies are thus necessary to determine whether the benefits of using these NPs outweigh the risks.

Rapid identification of regulated organic chemical compounds in toys using ambient ionization and a miniature mass spectrometry system.

Rapid, on-site analysis was achieved through significantly simplified operation procedures for a wide variety of toy samples (crayon, temporary tattoo sticker, finger paint, modeling clay, and bubble solution) using a miniature mass spectrometry system with ambient ionization capability. The labor-intensive analytical protocols involving sample workup and chemical separation, traditionally required for MS-based analysis, were replaced by direct sampling analysis using ambient ionization methods. A Mini ß ion trap miniature mass spectrometer was coupled with versatile ambient ionization methods, e.g. paper spray, extraction spray and slug-flow microextraction nanoESI for direct identification of prohibited colorants, carcinogenic primary aromatic amines, allergenic fragrances, preservatives and plasticizers from raw toy samples. The use of paper substrates coated with Co3O4 nanoparticles allowed a great increase in sensitivity for paper spray. Limits of detection as low as 5µgkg-1 were obtained for target analytes. The methods being developed based on the integration of ambient ionization with miniature mass spectrometer represent alternatives to current in-lab MS analysis operation, and would enable fast, outside-the-lab screening of toy products to ensure children's safety and health.

Assessment of corrosion resistance of cast cobalt- and nickel-chromium dental alloys in acidic environments.

BACKGROUND: The aim of this study was to compare the degradation resistance of nickel-chromium (Ni-Cr) and cobalt-chromium (Co-Cr) alloys used as a base material for partial dentures in contact with saliva. METHODS: Wiron® 99 and Wironit Extra-Hard® were selected as representative casting alloys for Ni-Cr and Co-Cr alloys, respectively. The alloys were tested in contact with deionized water, artificial saliva and acidified artificial saliva. Material characterization was performed by X-ray diffractometry (XRD) and microhardness and nanohardness testing. The corrosion properties of the materials were then analyzed using open circuit potential analysis and potentiodynamic analysis. Alloy leaching in solution was assessed by inductively coupled plasma mass spectrometry techniques. RESULTS: Co-Cr alloy was more stable than the Ni-Cr alloy in all solutions tested. Leaching of nickel and corrosion attack was higher in Ni-Cr alloy in artificial saliva compared with the acidified saliva. The corrosion resistance of the Co-Cr alloy was seen to be superior to that of the Ni-Cr alloy, with the former exhibiting a lower corrosion current in all test solutions. Microstructural topographical changes were observed for Ni-Cr alloy in contact with artificial saliva. The Ni-Cr alloy exhibited microstructural changes and lower corrosion resistance in artificial saliva. The acidic changes did not enhance the alloy degradation. CONCLUSIONS: Ni-Cr alloys are unstable in solution and leach nickel. Co-Cr alloys should be preferred for clinical use.

ZIF-67 derived porous Co3O4 hollow nanopolyhedron functionalized solution-gated graphene transistors for simultaneous detection of glucose and uric acid in tears.

Biomarkers in tears have attracted much attention in daily healthcare sensing and monitoring. Here, highly sensitive sensors for simultaneous detection of glucose and uric acid are successfully constructed based on solution-gated graphene transistors (SGGTs) with two separate Au gate electrodes, modified with GOx-CHIT and BSA-CHIT respectively. The sensitivity of the SGGT is dramatically improved by co-modifying the Au gate with ZIF-67 derived porous Co3O4 hollow nanopolyhedrons. The sensing mechanism for glucose sensor is attributed to the reaction of H2O2 generated by the oxidation of glucose near the gate, while the sensing mechanism for uric acid is due to the direct electro-oxidation of uric acid molecules on the gate. The optimized glucose and uric acid sensors show the detection limits both down to 100nM, far beyond the sensitivity required for non-invasive detection of glucose and uric acid in tears. The glucose and uric acid in real tear samples was quantitatively detected at 323.2 ± 16.1µM and 98.5 ± 16.3µM by using the functionalized SGGT device. Due to the low-cost, high-biocompatibility and easy-fabrication features of the ZIF-67 derived porous Co3O4 hollow nanopolyhedron, they provide excellent electrocatalytic nanomaterials for enhancing sensitivity of SGGTs for a broad range of disease-related biomarkers.

Characteristics and properties of nano-LiCoO2 synthesized by pre-organized single source precursors: Li-ion diffusivity, electrochemistry and biological assessment.

BACKGROUND: LiCoO2 is one of the most used cathode materials in Li-ion batteries. Its conventional synthesis requires high temperature (>800 °C) and long heating time (>24 h) to obtain the micronscale rhombohedral layered high-temperature phase of LiCoO2 (HT-LCO). Nanoscale HT-LCO is of interest to improve the battery performance as the lithium (Li+) ion pathway is expected to be shorter in nanoparticles as compared to micron sized ones. Since batteries typically get recycled, the exposure to nanoparticles during this process needs to be evaluated. RESULTS: Several new single source precursors containing lithium (Li+) and cobalt (Co2+) ions, based on alkoxides and aryloxides have been structurally characterized and were thermally transformed into nanoscale HT-LCO at 450 °C within few hours. The size of the nanoparticles depends on the precursor, determining the electrochemical performance. The Li-ion diffusion coefficients of our LiCoO2 nanoparticles improved at least by a factor of 10 compared to commercial one, while showing good reversibility upon charging and discharging. The hazard of occupational exposure to nanoparticles during battery recycling was investigated with an in vitro multicellular lung model. CONCLUSIONS: Our heterobimetallic single source precursors allow to dramatically reduce the production temperature and time for HT-LCO. The obtained nanoparticles of LiCoO2 have faster kinetics for Li+ insertion/extraction compared to microparticles. Overall, nano-sized LiCoO2 particles indicate a lower cytotoxic and (pro-)inflammogenic potential in vitro compared to their micron-sized counterparts. However, nanoparticles aggregate in air and behave partially like microparticles.

Ultrastrong steel via minimal lattice misfit and high-density nanoprecipitation.

Next-generation high-performance structural materials are required for lightweight design strategies and advanced energy applications. Maraging steels, combining a martensite matrix with nanoprecipitates, are a class of high-strength materials with the potential for matching these demands. Their outstanding strength originates from semi-coherent precipitates, which unavoidably exhibit a heterogeneous distribution that creates large coherency strains, which in turn may promote crack initiation under load. Here we report a counterintuitive strategy for the design of ultrastrong steel alloys by high-density nanoprecipitation with minimal lattice misfit. We found that these highly dispersed, fully coherent precipitates (that is, the crystal lattice of the precipitates is almost the same as that of the surrounding matrix), showing very low lattice misfit with the matrix and high anti-phase boundary energy, strengthen alloys without sacrificing ductility. Such low lattice misfit (0.03 ± 0.04 per cent) decreases the nucleation barrier for precipitation, thus enabling and stabilizing nanoprecipitates with an extremely high number density (more than 1024 per cubic metre) and small size (about 2.7 ± 0.2 nanometres). The minimized elastic misfit strain around the particles does not contribute much to the dislocation interaction, which is typically needed for strength increase. Instead, our strengthening mechanism exploits the chemical ordering effect that creates backstresses (the forces opposing deformation) when precipitates are cut by dislocations. We create a class of steels, strengthened by Ni(Al,Fe) precipitates, with a strength of up to 2.2 gigapascals and good ductility (about 8.2 per cent). The chemical composition of the precipitates enables a substantial reduction in cost compared to conventional maraging steels owing to the replacement of the essential but high-cost alloying elements cobalt and titanium with inexpensive and lightweight aluminium. Strengthening of this class of steel alloy is based on minimal lattice misfit to achieve maximal precipitate dispersion and high cutting stress (the stress required for dislocations to cut through coherent precipitates and thus produce plastic deformation), and we envisage that this lattice misfit design concept may be applied to many other metallic alloys.

In vivo Assessment of Antioxidant and Wound Healing Improvement of a New Schiff Base Derived Co (II) Complex in Rats.

Co (II) complex (CMLA) was investigated to evaluate the rate of wound healing in rats. Animals were placed into four groups: gum acacia, Intrasite gel, 10 and 20 mg/ml of CMLA. Wounds were made on the dorsal neck area, then treated with Intrasite gel or CMLA; both of these treatments led to faster healing than with gum acacia. Histology of the wounds dressed with CMLA or Intrasite gel displayed a smaller scar width, required less time to heal and showed more collagen staining and fewer inflammatory cells in comparison to wounds dressed with the vehicle. Immunohistochemistry for Hsp70 and TGF-ß showed greater staining intensity in the treated groups compared to the vehicle group. Bax staining was less intense in treated groups compared to the vehicle group, suggesting that CMLA and Intrasite gel provoked apoptosis, responsible for the development of granulation tissue into a scar. CD31 protein analysis showed that the treated groups enhanced angiogenesis and increased vascularization compared to the control group. Furthermore, a significant increase in the levels of GPx and SOD and a decrease in MDA were also observed in the treated groups. This results suggest that CMLA is a potentially promising agent for the wounds treatment.