A new probabilistic assessment process for human health risk (HHR) in groundwater with extensive fluoride and nitrate optimized by non parametric estimation method.

Excessive amounts of fluoride (F-) and nitrate (NO3-) in groundwater pose a significant threat to human health. However, a quantitative approach to assessing the human health risks caused by these harmful substances is lacking. To optimize the probabilistic assessment process for human health risk (HHR), this study introduced kernel density estimation (KDE) into the stochastic simulation of F- and NO3- content in groundwater samples. The potential HHRs caused by F- and NO3- in Songyuan City were summarized by combining the probabilistic and deterministic assessments. This study found that the concentrations of F- and NO3- did not follow common probability density functions (PDFs), but the KDE method passed the Kolmogorov-Smirnov test with the critical value of 0.067 and 0.062, showing high fitting accuracy. Monte Carlo simulation indicated that the probability of NO3- for children and adult exceeding the standard is 21.95% and 15.14%, respectively, which is comparable with the results of the deterministic assessment, but the probabilistic assessment emphasized lower probability of HHRs in children caused by excess F-(4.14%). Global sensitivity analysis revealed that excessive NO3- in groundwater has the highest sensitivity of the HHR (>0.1), followed by other factors representing water use habits (>0.01). This study presents a refined probabilistic assessment method for HHR and provides a scientific reference for understanding the state of groundwater environments.

A yearlong monitoring campaign of polycyclic aromatic compounds and other air pollutants at three sites in Sweden: Source identification, in vitro toxicity and human health risk assessment.

Air pollution is a complex mixture of gases and particulate matter (PM) with local and non-local emission sources, resulting in spatiotemporal variability in concentrations and composition, and thus associated health risks. To study this in the greater Stockholm area, a yearlong monitoring campaign with in situ measurements of PM10, PM1, black carbon, NOx, O3, and PM10-sampling was performed. The locations included an Urban and a Rural background site and a Highway site. Chemical analysis of PM10 was performed to quantify monthly levels of polycyclic aromatic compounds (PACs), which together with other air pollution data were used for source apportionment and health risk assessment. Organic extracts from PM10 were tested for oxidative potential in human bronchial epithelial cells. Strong seasonal patterns were found for most air pollutants including PACs, with higher levels during the winter months than summer e.g., highest levels of PM10 were detected in March at the Highway site (33.2 µg/m3) and lowest in May at the Rural site (3.6 µg/m3). In general, air pollutant levels at the sites were in the order Highway > Urban > Rural. Multivariate analysis identified several polar PACs, including 6H-Benzo[cd]pyren-6-one, as possible discriminatory markers for these sites. The main sources of particulate pollution for all sites were vehicle exhaust and biomass burning emissions, although diesel exhaust was an important source at the Highway site. In vitro results agreed with air pollutant levels, with higher oxidative potential from the winter samples. Estimated lung cancer cases were in the order PM10 > NO2 > PACs for all sites, and with less evident seasonal differences than in vitro results. In conclusion, our study presents novel seasonal data for many PACs together with air pollutants more traditionally included in air quality monitoring. Moreover, seasonal differences in air pollutant levels correlated with differences in toxicity in vitro.

House dust mite allergens and nitrated products: Identification and risk assessment in indoor dust.

Air pollutants can potentially lead to nitration of allergic proteins, thus promoting sensitization of these allergens. However, little is currently known about the nitration status of house dust mite (HDM) allergens. We identified the occurrence of nitrated products of two major HDM allergens Der f 1 and Der p 1 in dust samples collected from college dormitories in eastern China and assessed their associated health risk. The results showed that both non-nitrated and nitrated forms of the two allergens were detected in the dust in the range of non-detected (ND)-10.6, 1.44-15.4, ND-22.4, ND-7.28 µg/g for non-nitrated Der f 1, nitrated Der f 1, non-nitrated Der p 1 and nitrated Der p 1, respectively. The median rates of nitration were determined as 74.0% for Der f 1 and 20.4% for Der p 1 at consideration of one nitration site. Further analysis reveals that the levels of HDM allergens and their nitrated products were found to be generally higher during winter, in dormitories of lower altitude and with female occupants. Furthermore, the calculated risk indexes were at considerably high levels. Our findings suggest that nitrated HDM allergens have already accumulated in the environment at such significant levels and their associated health risk calls for our immediate attention.

An ontology-based study on water quality: probabilistic risk assessment of exposure to fluoride and nitrate in Shiraz drinking water, Iran using fuzzy multi-criteria group decision-making models.

World Health Organization reports that 2.2 million people die yearly from insufficient sanitary drinking water. This ontology-based study focused on investigating the chemical quality of drinking water through a new water quality index designed by fuzzy multi-criteria group decision-making methods, merged with GIS, and, secondly, surveying non-carcinogenic risk assessment of fluoride and nitrate using Monte Carlo simulation and sensitivity analysis in Shiraz's water sources. F-, NO3-, NO2-, EC, TDS, alkalinity, TH, SO42-, Cl-, and Na were applied in the WQI. The NO3- mean concentrations were 23.15 and 27.66 mg/L in the cold and warm seasons, while the mean concentrations of fluoride were 0.50 and 0.46 mg/L during the cold and warm period. The 95th centiles of fluoride's HQs among infants, children, teenagers, and adults were 0.56, 0.7, 0.49, and 0.4, respectively, in the cold season, which was 0.65 and 0.81, respectively, 0.57 and 0.46 for mentioned groups in the warm season. In comparison, the 95th centiles of nitrate's HQs among infants, children, teenagers, and adults were 1.27, 1.59, 1.13, and 0.9, respectively. The HQs were more than 1 for infants, children, and teenagers, so nitrate can have various adverse effects, whereas fluoride does not adversely affect all aging groups in both seasons. Also, nitrate concentration can increase the non-carcinogenic risk, which the IR and ED lead to the HQ increasing. In contrast, BW has a negative effect on risk increasing. Overall, source management of these parameters can significantly reduce the concentration of nitrate and their adverse human health effect.

Multivariate Statistical Analysis for Mutual Dependence Assessment of Selected Polyphenols, Organic Acids and Metals in Cool-Climate Wines.

Polyphenols, organic acids and metal ions are an important group of compounds that affect the human health and quality of food and beverage products, including wines. It is known that a specific correlation between these groups exist. While wines coming from the New World and the Old World countries are extensively studied, wines coming from cool-climate countries are rarely discussed in the literature. One of the goals of this study was to determine the elemental composition of the wine samples, which later on, together as polyphenols and organic acids content, was used as input data for chemometric analysis. The multivariate statistical approach was applied in order to find specific correlations between the selected group of compounds in the cool-climate wines and the features that distinguish the most and differ between red and white wines and rosé wines. Moreover, special attention was paid to resveratrol and its correlation with selected wine constituents.

Nitrate in groundwater and agricultural products: intake and risk assessment in northeastern Iran.

The suitability of groundwater and agricultural products for human consumption requires determining levels and assessing the health risks associated with potential pollutants. Here, particularly pollution with nitrate still remains a challenge, especially for those urban areas suffering from insufficient sewage collection systems, resulting in contaminating soil, endangering food safety, and deteriorating drinking water quality. In the present study, nitrate concentrations in the commonly consumed fruit and vegetable species were determined, and the results, together with the groundwater nitrate levels, were used to assess the associated health risks for Mashhad city residents. For this assessment, 261 water samples and 16 produce types were used to compute the daily intake of nitrate. Nitrate in groundwater was analyzed using a spectrophotometer, and produce species were examined using High-Performance Liquid Chromatography. Ward's hierarchical cluster analysis was applied for categorizing produce samples with regard to their nitrate content. Additionally, to account for the sanitation hazards associated with groundwater quality for drinking purposes, total coliform and turbidity were also assessed using the membrane filter (MF) technique and a nephelometer, respectively. Nitrate concentrations exceeded the prescribed permissible limits in 42% of the groundwater wells. The outcomes also exhibit significantly higher nitrate accumulation levels in root-tuber vegetables and leafy vegetables compared to fruit vegetables and fruits. Using cluster analysis, the accumulation of nitrate in vegetables and fruits was categorized into four clusters, specifying that radish contributes to 65.8% of the total content of nitrate in all samples. The Estimated Daily Intake (EDI) of nitrate and Health Risk Index (HRI) associated with consumption of groundwater exceeded the prescribed limit for the children's target group in Mashhad's south and central parts. Likewise, EDI and HRI values for produce consumption, in most samples, were found to be in the tolerable range, except for radish, lettuce, and cabbage, potentially posing risks for both children and adult consumers. The total coliforms in groundwater were found to violate the prescribed limit at 78.93% of the sampling locations and were generally much higher over the city's central and southern areas. A relatively strong correlation (R2 = 0.6307) between total coliform and nitrate concentrations suggests the release of anthropogenic pollution (i.e., sewage and manure) in the central and southern Mashhad.

Tailor-made biochar systems: Interdisciplinary evaluations of ecosystem services and farmer livelihoods in tropical agro-ecosystems.

Organic matter management is key to sustain ecosystem services provided by soils. However, it is rarely considered in a holistic view, considering local resources, agro-environmental effects and harmonization with farmers' needs. Organic inputs, like compost and biochar, could represent a sustainable solution to massive current challenges associated to the intensification of agriculture, in particular for tropical regions. Here we assess the potential of agricultural residues as a resource for farmer communities in southwestern India to reduce their dependency on external inputs and sustain ecosystem services. We propose a novel joint evaluation of farmers' aspirations together with agro-environmental effects of organic inputs on soils. Our soil quality evaluation showed that biochar alone or with compost did not improve unilaterally soils in the tropics (Anthroposol, Ferralsol and Vertisol). Many organic inputs led to an initial decrease in water-holding capacities of control soils (-27.3%: coconut shell biochar with compost on Anthroposol). Responses to organic matter inputs for carbon were strongest for Ferralsols (+33.4% with rice husk biochar), and mostly positive for Anthroposols and Vertisols (+12.5% to +13.8% respectively). Soil pH responses were surprisingly negative for Ferralsols and only positive if biochar was applied alone (between -5.6% to +1.9%). For Anthroposols and Vertisols, highest increases were achieved with rice husk biochar + vermicomposts (+7.2% and +5.2% respectively). Our socio-economic evaluation showed that farmers with a stronger economical position showed greater interest towards technology like biochar (factor 1.3 to 1.6 higher for farmers cultivating Anthroposols and/or Vertisols compared to Ferralsols), while poorer farmers more skepticism, which may lead to an increased economical gap within rural communities if technologies are not implemented with long-term guidance. These results advocate for an interdisciplinary evaluation of agricultural technology prior to its implementation as a development tool in the field.

Mutagenicity, health risk, and disease burden of exposure to organic micropollutants in water from a drinking water treatment plant in the Yangtze River Delta, China.

A wide variety of organic micropollutants in drinking water pose a serious threat to human health. This study was aimed to reveal the characteristics of organic micropollution profiles in water from a drinking water treatment plant (DWTP) in the Yangtze River Delta, China and investigate the mutagenicity, health risk and disease burden through mixed exposure to micropollutants in water. The presence of organic micropollutants in seven categories in organic extracts (OEs) of water from the DWTP was determined, and Ames test was conducted to test the mutagenic effect of OEs. Meanwhile, health risk of exposure to organic micropollutants in finished water through three exposure routes (ingestion, dermal absorption and inhalation) was assessed with the method proposed by U.S. EPA, and disability-adjusted life years (DALYs) were combined to estimate the disease burden of cancer based on the carcinogenic risk (CR) assessment. The results showed that 28 organic micropollutants were detected in the raw and finished water at total concentrations of 967.28 ng/L and 1073.45 ng/L, respectively, of which phthalate esters (PAEs) were the dominant category (95.79% in the raw water and 96.61% in the finished water). Although the results of the Ames test for OEs were negative and the non-carcinogenic hazard index of the organic micropollutants in the finished water was less than 1 in all age groups, the total CR was 2.17 × 10-5, higher than the negligible risk level (1.00 × 10-6). The total DALYs caused by the organic micropollutants in the finished water was 2945.59 person-years, and the average individual DALYs was 2.21 × 10-6 per person-year (ppy), which was 2.21 times the reference risk level (1.00 × 10-6 ppy) defined by the WHO. Exposure to nitrosamines (NAms) was the major contributor to the total CR (92.06%) and average individual DALYs (94.58%). This study demonstrated that despite the negative result of the mutagenicity test with TA98 and TA100 strains, the health risk of exposure to organic micropollutants in drinking water should not be neglected.

Analysis of the possibility of conducting a comprehensive assessment of landfill leachate contamination using physicochemical indicators and toxicity test.

The inevitable consequence of the operation of landfills is the emission of leachate, which is considered to be one of the main polluters of the ground and water environment. The leachate contains soluble organic compounds, inorganic contaminants, suspended solids, heavy metals and dangerous substances. The selection of the leachate disposal method requires a comprehensive assessment of its properties. Therefore, the physicochemical parameters and toxicity tests were chosen for a comprehensive assessment of the properties of leachate. Four municipal waste landfills (operational and non-operational) were selected for the study, for which multidimensional statistical analyses were carried out. The study was conducted between the period of April 2018 and December 2019. The comprehensive assessment showed that pollutants in leachate from the analyzed landfills remained at a level which did not allow them to be discharged to water or soil. The presence of substances particularly harmful to the aquatic environment (e.g AN, chromium, copper) may hinder their treatment together with household sewage, as it involves obtaining a permit required under laws. Toxicity of leachate may also be a problem, as it may persist after the treatment process is completed. The values of pH, EC and the concentrations of ON, TDS, TSS, chloride, iron and manganese had the strongest influence on the properties of leachate from all landfills. For operational landfills, these were also calcium concentrations, for non-operational ones COD, TU and the concentrations of TKN, AN, TS, sodium, potassium and magnesium. The mentioned parameters also showed strong correlation with other physicochemical properties of the leachate, which indicate their suitability for the monitoring of leachate and the aquatic environment in the vicinity of municipal waste landfills.

Advances and limitations in the determination and assessment of gunshot residue in the environment.

Gunshot residue (GSR) stemming from the discharge of firearms has been essential to advancements in the field of forensic science however the human and environmental health impacts from GSR are far less researched. GSR represents a multifaceted concern: it contains a complex mixture of inorganic and organic components and produces airborne particles with variable sizes, depositions, and fates. Herein we evaluate studies in the literature examining GSR collection, deposition, composition, environmental contamination, and potential remediation techniques within the last two decades (2000 - 2020). Throughout we reflect upon key findings and weaknesses in relation to environmental characterization of GSR and associated firearm contaminants. Research focused on techniques to analyze both inorganic and organic GSR simultaneously has begun, but requires additional effort. A vast majority of the available environmental characterization literature focuses on soil contamination at outdoor firing ranges for a select number of elements (Cu, Pb, Sb) with comparisons between ranges or at different collection distances and depths. There is limited ability for between study comparisons due to collection and analysis differences as well as a lack of background soil sampling. Notably, these studies lack direct quantification of the contribution of contaminants from GSR as well as analysis of organic compounds. Currently, there is a need for air monitoring to determine the composition, deposition, and fate of GSR, particularly in outdoor settings. This review summarizes the collection, characterization, and environmental studies related to GSR and highlights areas of research needed to establish the environmental health impacts.

Occurrence, spatial distribution, seasonal variations, potential sources, and inhalation-based health risk assessment of organic/inorganic pollutants in ambient air of Tehran.

The present study evaluated the concentrations, spatial distribution, seasonal variations, potential sources, and risk assessment of organic/inorganic pollutants in ambient air of Tehran city. Totally, 180 air samples were taken from 9 sampling stations from March 2018 to March 2019 and were analyzed to determine the concentrations of organic pollutants (BTEX compounds and PM2.5-bound PAHs) plus inorganic pollutants (PM2.5-bound metals and asbestos fibers). The results revealed that the mean concentrations of ∑ PAHs, BTEX, ∑ heavy metals, and asbestos fibers were 5.34 ng/m3, 60.55 µg/m3, 8585.12 ng/m3, and 4.13 fiber/ml in the cold season, respectively, and 3.88 ng/m3, 33.86 µg/m3, 5682.61 ng/m3, and 3.21 fiber/ml in the warm season, respectively. Source apportionment of emission of the air pollutants showed that PAHs are emitted from diesel vehicles and industrial activities. BTEX and asbestos are also released mainly by vehicles. The results of the inhalation-based risk assessment indicated that the carcinogenic risk of PAHs, BTEX, and asbestos exceeded the recommended limit by The US environmental protection agency (US EPA) and WHO (1 × 10-4). The risk of carcinogenesis of heavy metal of lead and chromium also exceeded the recommended limit. Thus, proper management strategies are required to control the concentration of these pollutants in Tehran's ambient air in order to maintain the health of Tehran's citizens.

Seasonal assessment of drinking water sources in Rwanda using GIS, contamination degree (Cd), and metal index (MI).

The quality of drinking water source remains as a major concern in areas of developing and underdeveloped countries worldwide. The treatment and supply of drinking water in Rwanda are carried out by Water and Sanitation Corporation, a state-owned public company. However, it is not able to supply water to all households. Consequently, the non-serviced households depend on natural water sources, like springs, to meet their water requirements. Nevertheless, the water quality in these springs is scarcely known. Therefore, this study assessed and compared metal elements in drinking water sources in the dry and rainy seasons in 2017 using the contamination degree, metal index, and geographic information systems to reveal the spatial distribution of water quality within the considered water sources of springs in Rwanda. The samples were collected monthly from nine water sources of springs and the measured elements are aluminium, calcium, copper, iron, manganese, and zinc. The metal index indicated that during the dry season and rainy season, the sites of Kibungo (1.10 and 1.26) and Kinigi (1.01 and 1.54) have assessed a metal index which is higher than 1. Thus, the water quality of those sites was getting the threshold of warning. The analysis indicated that pollutants are easily transported into water bodies during the rainy season in urban and rural areas to a greater extent than during the dry season .

Realizing a high-rate sulfidogenic reactor driven by sulfur-reducing bacteria with organic substrate dosage minimization and cost-effectiveness maximization.

Biological sulfur reduction is an attractive sulfidogenic technology for the treatment of organics-deficient metal-laden wastewater, because it theoretically reduces the electron donor consumption by 75%, compared to sulfate reduction. However, reducing the external organic substrate dosage may lower the sulfur reduction rate. Supplying with a more biodegradable organic substrate could possibly enhance sulfidogenic activity but also increase the chemical cost. Therefore, the sulfide production performance of a sulfur-reducing bioreactor feeding with varied levels of organic supply, and different types of organic substrates were investigated. The results showed that high-rate sulfide production (12.30 mg S/L/h) in a sulfur-reducing bioreactor can be achieved at the minimal dosage of organic substrate as low as 39 mg C/L of organic carbon in the influent. Changing the type of organic substrate posed a significant effect on the sulfidogenic activity in the sulfur-reducing bioreactor. Sodium acetate was found to be the optimal substrate to achieve the highest sulfide production rate (28.20 mg S/L/h) by sulfur-reducing bacteria (S0RB), followed by ethanol, methanol, glycerol, pyruvic acid, acetic acid, glucose, sucrose, malic acid, sodium formate, formic acid, N-propanol, N-butanol, lactic acid, sodium lactate, propionic acid and sodium propionate (2.87 mg S/L/h as the lowest rate). However, the cost-effectiveness analysis showed that glucose was the most cost-effective organic substrate to realize the sulfur reduction process in high sulfide production rate (20.13 mg S/L/h) and low chemical cost (5.94 kg S/$). The utilization pathway of the different organic substrates in the sulfur-reducing bioreactor was also discussed.

Health Risk Assessment of Groundwater Contaminated by Oil Pollutants Based on Numerical Modeling.

To provide theoretical support for the protection of dispersed drinking water sources of groundwater, we need to accurately evaluate the time and scope of groundwater pollution hazards to human health. This helps the decision-making process for remediation of polluted soil and groundwater in service stations. In this study, we conducted such an evaluation by coupling numerical modeling with a health risk assessment. During the research, soil and groundwater samples were collected and analyzed for 20 pollutants. Fifty-six percent of the heavy contaminants and 100% of the organic contaminants exhibited maximum values at the location of the oil depot. Gray correlation analysis showed that the correlation between background samples and soil underlying the depot was 0.375-0.567 (barely significant to insignificant). The correlation between the reference sequence of other points was 0.950-0.990 (excellent correlation). The correlation of environmental impact after oil depot leakage followed the order: organic pollutants > heavy metals > inorganic pollutants. The groundwater simulation status and predictions indicated that non-carcinogenic health risks covered 25,462 m2 at the time of investigation, and were predicted to extend to 29,593 m2 after five years and to 39,873 m2 after 10 years. Carcinogenic health risks covered 21,390 m2 at the time of investigation, and were predicted to extend to 40,093 m2 after five years and to 53,488 m2 after 10 years. This study provides theoretical support for the protection of a dispersed drinking water source such as groundwater, and also helps the decision-making process for groundwater and soil environment improvement.

Occurrence and health risk assessment of pharmaceutical and personal care products (PPCPs) in tap water of Shanghai.

A monitoring study of 71 pharmaceuticals and personal care products (PPCPs) in tap water covered all districts of Shanghai. Nineteen PPCPs were detected in all samples, and most of them were detected with high concentration. Ten compounds were found with highest concentrations and their detection frequencies were over 80%, included thiamphenicol  (101.54 ng/L), florfenicol (84.56 ng/L), valsartan (66.84 ng/L), irbesartan (38.35 ng/L) hydrochlorothiazide (33.13 ng/L), 4-acetaminopyrine (48.16 ng/L), propylparaben (47.50 ng/L), dicyclohexylamine (42.33 ng/L), primidone (32.85 ng/L) and bisphenol A (31.51 ng/L). Only 6 PPCPs were not detected in all samples. Detection frequency of PPCPs was between 50% and 70% in most tap waters, but the total concentration of PPCPs ranged from 71.6 to 361 ng/L. Phenicols was the dominant type with average value of 100 ng/L, accounting for over 50% of most samples, followed by cardiovascular and psychotropic drugs with average value of 26.3 and 12.1 ng/L, respectively. In general, the residues of PPCPs in tap water of suburb were higher than those in central districts. The maximum residues happened in D district with the average concentration of 355 ng/L, followed by J, H and Cb districts with the average concentration of 269, 251 and 215 ng/L. In the same district, the content and distribution of PPCPs in tap waters were similar supplied by different water treatment plants. While those are some differences among tap waters inlet from the same water sources. Individual compound was expected to pose a negligible risk to human health with risk quotients (RQ) less than 1, except primidone which may pose potential risk to infants.

Microbial Fuel Cell-Based Biosensors.

The microbial fuel cell (MFC) is a promising environmental biotechnology that has been proposed mainly for power production and wastewater treatment. Though small power output constrains its application for directly operating most electrical devices, great progress in its chemical, electrochemical, and microbiological aspects has expanded the applications of MFCs into other areas such as the generation of chemicals (e.g., formate or methane), bioremediation of contaminated soils, water desalination, and biosensors. In recent decades, MFC-based biosensors have drawn increasing attention because of their simplicity and sustainability, with applications ranging from the monitoring of water quality (e.g., biochemical oxygen demand (BOD), toxicants) to the detection of air quality (e.g., carbon monoxide, formaldehyde). In this review, we summarize the status quo of MFC-based biosensors, putting emphasis on BOD and toxicity detection. Furthermore, this review covers other applications of MFC-based biosensors, such as DO and microbial activity. Further, challenges and prospects of MFC-based biosensors are briefly discussed.

The socio-economic impact timeline in Serbia for persistent organic pollutants (POPs).

Assessing the socio-economic impact of dangerous chemicals, including persistent organic pollutants (POPs) as a specific segment, includes analysis of their impacts on human health, on the environment and on local economic development. Abundant evidence of these effects of dangerous chemicals throughout the world is provided by published research. According to WHO, these chemicals cause around 4.9 million deaths (8.3%) and 86 million Disability-Adjusted Life Years (5.7%) globally; according to very conservative estimates, 20% of cancer deaths are the consequence of the cancerous effects of chemicals in the work place. Their impact on economic development is manifested primarily through reduced productivity of society due to health impairment of both the population and natural resources. Specific research, the results of which are presented in this article, has been focused on the impact of POPs on human health. This impact is presented in very general terms through estimation of the monetized cost effects for treating those diseases and cancers assumed to be caused by POPs in Serbia. The cost estimation based on available data amounts to approximately € 68 million for a 5-year period.

Source apportionment and health risk assessment of organic constituents in fine ambient aerosols (PM2.5): A complete year study over National Capital Region of India.

Fine ambient aerosols (PM2.5) levels in the atmosphere are continuously worsening over Delhi and National Capital Region (NCR) of India. Complete source profiles are required to be assessed for implementation of proper mitigation measures over the NCR. In this study, emission sources of PM2.5 are reported for the NCR of India for samples collected during December 2016 to December 2017 at three sampling sites in Delhi, Uttar Pradesh and Haryana. Organic constituents (n-alkanes, isoprenoid hydrocarbons, polycyclic aromatic hydrocarbons, phthalates, levoglucosan and n-alkanoic acids) in PM2.5 were measured to apportion the sources over the study area. Source apportionment of PM2.5 was performed using organic constituents by Positive Matrix Factorization (PMF) and Principal Component Analysis (PCA). Health risk associated with organic pollutants [PAHs and carcinogen BEHP bis(2-ethylhexyl) phthalate] demonstrated the threat of PM2.5 exposure via inhalation. Transport pathways of air masses were evaluated using 3-day backward trajectories and observed that some air masses originated from local sources along with long-range transport which influenced the PAHs concentration during most of the study period over the NCR. PMF and PCA resulted in the five major emission sources [vehicular emissions (32.2%), biomass burning (30%), cooking emissions (16.8%), plastic burning (13.4%), mixed sources (7.6%) including biogenic and industrial emissions] for PM2.5 over the sampling sites. The present study reveals that transport sector is a major source to be targeted to reduce the vehicular emissions and consequent health risks associated with organic pollutants especially PAHs.

Comprehensive assessment of organic contaminant removal from on-site sewage treatment facility effluent by char-fortified filter beds.

To remove organic contaminants from wastewater using cost-efficient and currently existing methods, our study investigated char-fortified filter beds for on-site sewage treatment facilities (OSSFs) in a long-term field setting. OSSFs are commonly used in rural and semi-urban areas worldwide to treat wastewater when municipal wastewater treatment is not economically feasible. First, we screened for organic contaminants with gas chromatography and liquid chromatography mass spectrometry-based targeted and untargeted analysis and then we developed quantitative structure-property relationship models to search for key molecular features responsible for the removal of organic contaminants. We identified 74 compounds (24 confirmed by reference standards) including plasticizers, UV stabilizers, fragrances, pesticides, surfactant and polymer impurities, pharmaceuticals and their metabolites, and many biogenic compounds. Sand filters that are used as a secondary step after the septic tank in OSSFs could remove hydrophobic contaminants. The addition of biochar significantly increased the removal of these and a few hydrophilic compounds (Wilcoxon signed-rank test, α = 0.05). Besides hydrophobicity-driven sorption, biodegradation was suggested to be the most important removal pathway in this long-term field application. However, further improvements are necessary to remove very hydrophilic contaminants as they were not removed with sand and biochar-fortified sand.

A preliminary investigation of 942 organic micro-pollutants in the atmosphere in waste processing and urban areas, northern Vietnam: Levels, potential sources, and risk assessment.

Of 942 organic micro-pollutants screened, 167 compounds were detected at least once in the atmosphere in some primitive waste processing sites and an urban area in northern Vietnam by using a polyurethane foam-based passive air sampling (PUF-PAS) method and an Automated Identification and Quantification System with a Database (AIQS-DB) for GC-MS. Total concentrations of organic pollutants were higher in samples collected from an urban area of Hanoi city (2300-2600 ng m-3) as compared with those from an end-of-life vehicle (ELV) dismantling area in Bac Giang (900-1700 ng m-3) and a waste recycling cooperative in Thai Nguyen (870-1300 ng m-3). Domestic chemicals (e.g., n-alkanes, phthalate ester plasticizers, and synthetic phenolic antioxidants) dominated the organic pollutant patterns in all the samples, especially in the urban area. Pesticides (e.g., permethrins, chlorpyrifos, and propiconazole) were found in the atmosphere around the ELV sites at more elevated concentrations than the other areas. Levels of polycyclic aromatic hydrocarbons and their derivatives in the Bac Giang and Thai Nguyen facilities were significantly higher than those measured in Hanoi urban houses, probably due to the waste processing activities. Daily intake doses of organic pollutants via inhalation were estimated for waste processing workers and urban residents. This study shall provide preliminary data on the environmental occurrence, potential emission sources, and effects of multiple classes of organic pollutants in urban and waste processing areas in northern Vietnam.