Noninvasive Assessment of Chicken Egg Fertility during Incubation Using HSSE-GC-MS VOC Profiling.

Volatile organic compounds (VOCs) carry crucial information about chicken egg fertility. Assessing the fertility before incubation holds immense potential for poultry industry efficiency. Our study used headspace sorptive extraction-gas chromatography-mass spectrometry to analyze egg VOCs before and during the initial 12 incubation days. A total of 162 VOCs were identified. Hexanal was significantly higher in unfertilized eggs, whereas compounds such as propan-2-ol, propan-2-one, and carboxylic acids were higher in fertilized eggs. Furthermore, the obtained multiple logistic regression model outperformed the partial least-squares-discriminant analysis (PLS-DA) model, demonstrating lower complexity and superior performance. Fertile eggs were accurately identified in the validation set in 68-75% of the cases during the initial 4 days, to 85 and 100% on days 6 and 8. Finally, hierarchical cluster analysis in fertilized eggs revealed the clustering of VOCs of the same chemical class, indicative of their shared biochemical origin. This suggests a promising direction for future research aimed at understanding the biological information embedded in VOCs and their relationship to biochemical processes during embryo development.

Characterization of VOC emissions and health risk assessment in the plastic manufacturing industry.

Volatile organic compounds (VOCs) significantly contribute to ozone pollution formation, and many VOCs are known to be harmful to human health. Plastic has become an indispensable material in various industries and daily use scenarios, yet the VOC emissions and associated health risks in the plastic manufacturing industry have received limited attention. In this study, we conducted sampling in three typical plastic manufacturing factories to analyze the emission characteristics of VOCs, ozone formation potential (OFP), and health risks for workers. Isopropanol was detected at relatively high concentrations in all three factories, with concentrations in organized emissions reaching 322.3 µg/m3, 344.8 µg/m3, and 22.6 µg/m3, respectively. Alkanes are the most emitted category of VOCs in plastic factories. However, alkenes and oxygenated volatile organic compounds (OVOCs) exhibit higher OFP. In organized emissions of different types of VOCs in the three factories, alkenes and OVOCs contributed 22.8%, 67%, and 37.8% to the OFP, respectively, highlighting the necessity of controlling them. The hazard index (HI) for all three factories was less than 1, indicating a low non-carcinogenic toxic risk; however, there is still a possibility of non-cancerous health risks in two of the factories, and a potential lifetime cancer risk in all of the three factories. For workers with job tenures exceeding 5 years, there may be potential health risks, hence wearing masks with protective capabilities is necessary. This study provides evidence for reducing VOC emissions and improving management measures to ensure the health protection of workers in the plastic manufacturing industry.

Detection ofClostridioides difficileinfection by assessment of exhaled breath volatile organic compounds.

Clostridioides difficileinfection (CDI) is the leading cause of hospital-acquired infective diarrhea. Current methods for diagnosing CDI have limitations; enzyme immunoassays for toxin have low sensitivity andClostridioides difficilepolymerase chain reaction cannot differentiate infection from colonization. An ideal diagnostic test that incorporates microbial factors, host factors, and host-microbe interaction might characterize true infection. Assessing volatile organic compounds (VOCs) in exhaled breath may be a useful test for identifying CDI. To identify a wide selection of VOCs in exhaled breath, we used thermal desorption-gas chromatography-mass spectrometry to study breath samples from 17 patients with CDI. Age- and sex-matched patients with diarrhea and negativeC.difficiletesting (no CDI) were used as controls. Of the 65 VOCs tested, 9 were used to build a quadratic discriminant model that showed a final cross-validated accuracy of 74%, a sensitivity of 71%, a specificity of 76%, and a receiver operating characteristic area under the curve of 0.72. If these findings are proven by larger studies, breath VOC analysis may be a helpful adjunctive diagnostic test for CDI.

Assessment of emissions and exposure in 3D printing workplaces in Taiwan.

Three-dimensional (3D) printing is an emerging and booming industry in Taiwan. Compared to traditional manufacturing, 3D printing has various advantages, such as advanced customization, additive manufacturing, reduced mold opening time, and reduced consumption of precursors. In this study, the real-time monitoring of particulate matter (PM) and total volatile organic compound (TVOC) emissions from various filaments is investigated using fused deposition modeling with material extrusion technology, a liquid-crystal display, a stereolithography apparatus based on vat photopolymerization technology, and binder jetting for occupational settings. An exposure assessment for nearby workers using the 3D printing process was performed, and improvement measures were recommended. Nine 3D printing fields were measured. The generation rate of ultrafine particles ranged from 1.19 × 1010 to 4.90 × 1012 #/min, and the geometric mean particle size ranged from 30.91 to 55.50 nm. The average concentration of ultrafine particles ranged from 2.31 × 103 to 7.36 × 104 #/cm3, and the PM2.5 and PM10 concentrations in each field ranged from 0.74 ± 0.27 to 12.46 ± 5.61 µg/m3 and from 2.39 ± 0.60 to 30.65 ± 21.26 µg/m3, respectively. The TVOC concentration ranged from 0.127 ± 0.012 to 1.567 ± 0.172 ppm. The respiratory deposition (RDUFPs) dose ranged from 2.02 × 1013 to 5.54 × 1014 nm2/day. Depending on the operating conditions, appropriate control and protective measures should be employed to protect workers' health.

Photochemical oxidation of VOCs and their source impact assessment on ozone under de-weather conditions in Western Taiwan.

The application of statistical models has excellent potential to provide crucial information for mitigating the challenging issue of ozone (O3) pollution by capturing its associations with explanatory variables, including reactive precursors (VOCs and NOX) and meteorology. Considering the large contribution of O3 in degrading the air quality of western Taiwan, three-year (2019-2021) hourly concentration data of VOC, NOX and O3 from 4 monitoring stations of western Taiwan: Tucheng (TC), Zhongming (ZM), Taixi (TX) and Xiaogang (XG), was evaluated to identify the effect of anthropogenic emissions on O3 formation. Owing to the high-ambient reactivity of VOCs on the underestimation of sources, photochemical oxidation was assessed to calculate the consumed VOC (VOCcons) which was followed by the source identification of their initial concentrations. VOCcons was observed to be highest in the summer season (16.7 and 22.7 ppbC) at north (TC and ZM) and in the autumn season (17.8 and 11.4 ppbC) in southward-located stations (TX and XG, respectively). Results showed that VOCs from solvents (25-27%) were the major source at northward stations whereas VOCs-industrial emissions (30%) dominated in south. Furthermore, machine learning (ML): eXtreme Gradient Boost (XGBoost) model based de-weather analysis identified that meteorological factors favor to reduce ambient O3 levels at TC, ZM and XG stations (-67%, -47% and -21%, respectively) but they have a major role in accumulating the O3 (+38%) at the TX station which is primarily transported from the upwind region of south-central Taiwan. Crucial insights using ML outputs showed that the finding of the study can be utilized for region-specific data-driven control of emission from VOCs-sources and prioritized to limit the O3-pollution at the study location-ns as well as their accumulation in distant regions.

Release characteristics and risk assessment of volatile sulfur compounds in a municipal wastewater treatment plant with odor collection device.

Due to the malodorous effects and health risks of volatile sulfur compounds (VSCs) emitted from wastewater treatment plants (WWTPs), odor collection devices have been extensively utilized; however, their effectiveness has rarely been tested. In the present investigation, the characteristics of VSCs released in a WWTP equipped with gas collection hoods are methodically examined by gas chromatography. The obtained results indicate that the concentration of VSCs in the ambient air can be substantially reduced, and the primary treatment unit still achieves the highest concentration of VSCs. Compared to WWTPs without odor collection devices, the concentration of H2S in this WWTP is not dominant, but its sensory effects and health risks are still not negligible. Additionally, research on the emission of VSCs from sludge reveals that the total VSCs emitted from dewatering sludge reaches the highest level. Volatile organic sulfur compounds play a dominant role in the component and sensory effects of VSCs released by sludge. This study provides both data and theoretical support for analyzing the effectiveness of odor collection devices in WWTPs, as well as reducing the source of VSCs. The findings can be effectively employed to optimize these devices and improve their performance.

Authenticity assessment of ground black pepper by combining headspace gas-chromatography ion mobility spectrometry and machine learning.

Currently, the authentication of ground black pepper is a major concern, creating a need for a rapid, highly sensitive and specific detection tool to prevent the introduction of adulterated batches into the food chain. To this aim, head space gas-chromatography ion mobility spectrometry (HS-GC-IMS), combined with machine learning, is tested in this initial, proof-of-concept study. A broad variety of authentic samples originating from eight countries and three continents were collected and spiked with a range of adulterants, both endogenous sub-products and an assortment of exogenous materials. The method is characterized by no sample preparation and requires 20 min for chromatographic separation and ion mobility data acquisition. After an explorative analysis of the data, those were submitted to two different machine learning algorithms (partial least squared discriminant analysis-PLS-DA and support vector machine-SVM). While the PLS-DA model did not provide fully satisfactory performances, the combination of HS-GC-IMS and SVM successfully classified the samples as authentic, exogenously-adulterated or endogenously-adulterated with an overall accuracy of 90 % and 96 % on withheld test set 1 and withheld test set 2, respectively (at a 95 % confidence level). Some limitations, expected to be mitigated by further research, were encountered in the correct classification of endogenously adulterated ground black pepper. Correct categorization of the ground black pepper samples was not adversely affected by the operator or the time span of data collection (the method development and model challenge were carried out by two operators over 6 months of the study, using ground black pepper harvested between 2015 and 2019). Therefore, HS-GC-IMS, coupled to an intelligent tool, is proposed to: (i) aid in industrial decision-making before utilization of a new batch of ground black pepper in the production chain; (ii) reduce the use of time-consuming conventional analyses and; (iii) increase the number of ground black pepper samples analyzed within an industrial quality control frame.

Species profile of volatile organic compounds emission and health risk assessment from typical indoor events in daycare centers.

Daycare centers (DCCs) play an instrumental role in early childhood development, making them a significant indoor environment for a large number of children globally. Amidst routine DCC activities, young children are exposed to a myriad of volatile organic compounds (VOCs), potentially impacting their health. Therefore, this study aims to investigate the VOC emissions during typical DCCs activities and evaluate respective health risk assessments. Employing a full-scale experimental setup within a well-controlled climate chamber, research was conducted into VOC emissions during three typical DCC events: arts-and-crafts (painting, gluing, modeling), cleaning, and sleeping activities tied to mattresses. The research identified 96 distinct VOCs, grouped into twelve categories, from 20 different events examined. Each event exhibited a unique VOC fingerprint, pinpointing potential source tracers. Also, significant variations in VOC emissions from different events were demonstrated. For instance, under cool & dry conditions, acrylic painting recorded high total VOC concentrations of 808 µg/m3, whereas poster painting showed only 58 µg/m3. Given these disparities, the study emphasizes the critical need for carefully selecting arts-and-crafts materials and cleaning agents in DCCs to effectively reduce VOC exposure. It suggests ventilating new mattresses before use and regular mattress check-ups to mitigate VOCs exposure during naps. Importantly, it revealed that certain events resulted in VOC levels exceeding the 10-5 cancer risk thresholds for younger children. Specifically, tetrachloroethylene and styrene from used mattresses in cool & dry conditions, ethylene oxide from new mattresses in warm & humid conditions, and styrene, during sand modeling in both conditions, were the key compounds contributing to this risk. These findings highlight the critical need for age-specific health risk assessments in DCCs. This study highlights the significance of understanding the profiles of VOC emissions from indoor events in DCCs, emphasizing potential health implications and laying a solid foundation for future investigations in this field.

Non-destructive egg breed separation using advanced VOC analytical techniques HSSE-GC-MS, PTR-TOF-MS, and SIFT-MS: Assessment of performance and systems' complementarity.

Over the past decade, advanced analytical techniques have been utilized to examine volatile organic compounds (VOCs) in eggs. These VOCs offer valuable insights into factors such as freshness, fertility, the presence of cracks, embryo sex, and breed. In our study, we assessed three mass spectrometry-based systems (headspace sorptive extraction gas chromatography-mass spectrometry; HSSE-GC-MS, proton transfer reaction time-of-flight-mass spectrometry; PTR-TOF-MS; and selected ion flow tube mass spectrometry; SIFT-MS) to analyze and identify VOCs present in intact hatching eggs from three distinct breeds (Dekalb white layer, Shaver brown layer, and Ross 308 broiler). The eggs were sampled on incubation days 2 and 8, to identify VOCs that distinguish breeds irrespective of incubation day. VOC measurements were conducted on 15 eggs per breed by placing them together with PDMS-coated stir bars inside inert Teflon® air sampling bags. After an accumulation period of 2 h, the headspace was analyzed using PTR-TOF-MS and SIFT-MS, while the VOCs adsorbed onto the stir bars were analyzed using GC-MS for additional compound identification. Partial least squares discriminant analysis (PLS-DA) models were constructed for breed differentiation, and variable selection was performed. As a result, 111 VOCs were identified using HSSE-GC-MS, with alcohols and esters being the most abundant. The PLS-DA models demonstrated the efficacy of breed discrimination, with the HSSE-GC-MS and the PTR-TOF-MS exhibiting the highest balanced accuracy of 95.5 % using a reduced set of 11 VOCs and 5 product ions, respectively. The SIFT-MS model had a balanced accuracy of 92.8 % with a reduced set of 11 product ions. Furthermore, complementarity was observed between HSSE-GC-MS, which primarily selected higher molecular weight VOCs, and PTR-TOF-MS and SIFT-MS. A higher correlation was found for compound abundances between the HSSE-GC-MS and the PTR-TOF-MS relative to the SIFT-MS, indicating that the PTR-TOF-MS was better suited to quantify specific compounds identified by the HSSE-GC-MS. Finally, the findings support the presence of VOCs originating from both synthetic and natural sources, highlighting the ability of the VOC analysis systems to non-destructively perform quality control and reveal differences in management practices or biological information encoded in eggs.

How well does your e-nose detect cancer? Application of artificial breath analysis for performance assessment.

Comparing electronic nose (e-nose) performance is a challenging task because of a lack of standardised method. This paper proposes a method for defining and quantifying an indicator of the effectiveness of multi-sensor systems in detecting cancers by artificial breath analysis. To build this method, an evaluation of the performances of an array of metal oxide sensors built for use as a lung cancer screening tool was conducted. Breath from 20 healthy volunteers has been sampled in fluorinated ethylene propylene sampling bags. These healthy samples were analysed with and without the addition of nine volatile organic compound (VOC) cancer biomarkers, chosen from literature. The concentration of the VOC added was done in increasing amounts. The more VOC were added, the better the discrimination between 'healthy' samples (breath without additives) and 'cancer' samples (breath with additives) was. By determining at which level of concentration the e-nose fails to reliably discriminate between the two groups, we estimate its ability to well predict the presence of the disease or not in a realistic situation. In this work, a home-made e-nose is put to the test. The results underline that the biomarkers need to be about 5.3 times higher in concentration than in real breath for the home-made nose to tell the difference between groups with a sufficient confidence.

Assessment of volatile emissions by aging books.

Indoor air quality (IAQ) has attracted a lot of attention due to its complexity and direct effect on human health. Indoor settings in libraries entail various volatile organic compounds (VOCs) linked to the aging and degradation of print material. The effect of the storage environment on paper life expectancy was investigated by targeting the VOC emissions of old and new books using headspace solid phase micro extraction-gas chromatography/mass spectrometry (HS-SPME-GC/MS) analysis. "Sniffing" of book degradation markers showed both ubiquitously and infrequently occurring VOCs. Old book "degradomics" revealed mostly alcohols (57%) and ethers (12%), whereas new books resulted mainly to ketones (40%) and aldehydes (21%). Chemometric processing of the results with principal component analysis (PCA) corroborated our initial observations and was able to discriminate the books by age into three groups: very old books (from the 1600 s to mid-1700), old books (from the 1800s to the early 1900s), and modern books (from the mid-twentieth century onwards) based on their gaseous markers. The measured mean concentrations of selected VOCs (acetic acid, furfural, benzene, and toluene) were below the respective guidelines set for similar places (i.e. museums). The applied non-invasive, green analytical methodology (HS-SPME-GC/MS) can assist librarians, stakeholders, and researchers to evaluate the IAQ, as well as the degree of degradation, and take the appropriate measures for book restoration and monitoring protocols.

Comprehensive multicomponent characterization and quality assessment of Xiaoyao Wan by UPLC-Q-Orbitrap-MS, HS-SPME-GC-MS and HS-GC-IMS.

Xiaoyao Wan (XYW) is a prescription medicine of traditional Chinese medicine (TCM) with the effects of "soothing the liver and relieving depression," and "strengthening spleen and nourishing blood". XYW has been widely concerned in the treatment of depression and has become one of the commonly used classic formulas in clinical practice. However, the pharmacodynamic substance basis and the quality control studies of XYW are hitherto quite limited. Here, we aim to fully utilize an advanced ultra - performance liquid chromatography-quadrupole - Orbitrap mass spectrometry (UPLC-Q-Orbitrap-MS), headspace-solid phase microextraction-gas chromatography-mass spectrometry (HS-SPME-GC-MS) and headspace-gas chromatography-ion mobility spectrometry (HS-GC-IMS) technique to deep characterization of the pharmacological substance basis and quantitatively evaluate the quality of XYW. Firstly, 299 compounds were identified or tentatively characterized, including 198 non-volatile organic compounds (n-VOCs) and 101 volatile organic compounds (VOCs). Secondly, principal component analysis (PCA) and hierarchical cluster analysis (HCA) was used to analyze quality differences in XYW at different manufacturers. Thirdly, a parallel reaction monitoring (PRM) method was established and validated to quantify the fourteen major effective substances in different manufacturers of XYW, which were chosen as the benchmarked substances to evaluate the quality of XYW. In conclusion, this study shows that the strategy provides a useful method for quality control of TCM and offers a practical workflow for exploring the quality consistency of TCM.

Accurate low-dose exposure assessment of benzene and monoaromatic compounds by diffusive sampling: sampling and analytical method validation according to ISO 23320 for radiello® samplers packed with activated charcoal.

The research study aimed at providing an accurate low-dose benzene exposure assessment method, by validating diffusive monitoring techniques for benzene personal exposure measurements at workplaces where benzene concentrations are expected in the low ppb range, such as in the present-day chemical, petrochemical, foundry, and pharmaceutical industry. The project was aimed at addressing the need for a robust and fully validated method to perform personal exposure measurements considering that the occupational exposure limit value for benzene is going to be significantly lowered in the next few years. Diffusive sampling offers a reliable alternative to pumped sampling methods, intrinsic safety in potentially explosive atmospheres, lightness, and ease of use. In this study, the radiello® diffusive sampler, with the packed activated charcoal RAD130 adsorbing substrate [suitable for solvent desorption and analysis by high-resolution gas chromatography-flame ionization detection (HRGC-FID)], was used. The experiments have been conducted following the ISO 23320 standard in the range from 0.005 to 0.1 ppm (16 to 320 µg/m3), yielding a full validation of the sampling and analytical method. The sampler performances have fulfilled all requisites of the ISO 23320 standard, in particular: bias due to the selection of a non-ideal sorbent is lower than 10% (no significant back diffusion of benzene due to concentration change in the atmosphere); bias due to storage of samples for up to 2 months is lower than 10%; nominal uptake rate for benzene on RAD130 is 74.65 mL/min; and expanded uncertainty of the sampling and analytical method is 20.6%. The sampling and analytical method is therefore fit-for-purpose for the personal exposure measurements aimed at testing compliance with occupational exposure limit values for benzene. The method is also fit for short-duration exposure monitoring related to specific tasks, and other volatile organic compounds, usually found in the same workplaces, such as aliphatic and aromatic hydrocarbons and some oxygenated compounds, have also been studied. In particular, n-hexane and isopropyl benzene, whose classification is currently under revision, can be efficiently monitored by this technique.

Assessment of the volatile and non-volatile profile of Savatiano PGI wines as affected by various terroirs in Attica, Greece.

Establishing the concept of terroir in wines, combined with the exploitation of native grape varieties, is considered a viable alternative to produce quality wines for increasing interest in the wine market. The aim of this study is the characterization of Protected Geographical Indication (PGI) Savatiano white wines from different regions of Attica (Greece), through the chemical and sensory description of the aroma of wines and the determination of their phenolic profiles. The wines produced with the same vinification protocol were evaluated using the descriptive sensory analysis method while they underwent profiling of volatile and phenolic compounds by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-tandem mass spectrometry (LC-MS/MS) respectively. The presence of regional differences within the wines was also explored, elaborated with variables that contribute to their differentiation, such as soil type, monthly average temperature, and rainfall. Volatile and sensory profiles of the wines separated the regions and confirmed that sub-regional differences attributed mainly to soil characteristics affect wine aroma. The wines from the east part of Attica were higher in esters, terpenes and higher alcohols with high scores in fruity and blossoms attributes while wines from the north part of Attica presented higher intensity of mineral, nutty and herbaceous attributes. The separations based solely on the phenolic compounds concentration were less clear but a relationship was found between the content of phenolic acids and flavonoids and the studied regions. To our knowledge this is the first characterization of Savatiano PGI wines of Attica generating a fingerprint including chemical composition and sensory aroma characteristics to differentiate wines, combining this pattern with particular sub-regions.

Health risk assessment of workers' exposure to BTEX and PM during refueling in an urban fuel station.

The proximity of fuel stations to the roads and the activities inside the station can contribute to PM and VOCs and impose health risks on station workers. The study presents the exposure and health risk assessment of the fuel station personnel to total volatile organic compounds (TVOCs) and particulate matter (PM) during refueling operations. TVOCs and PM monitoring were carried out at a fuel station in Chennai, India, for 1 week in March 2021, covering both weekdays and weekends. The health risks were assessed using EPA's health impact assessment methodology. Exposure to TVOCs (3177.39 ± 5450.32 µg/m3) exceeded the EPA standard of 5 µg/m3, by more than 500 times, peaking during refueling operations. The average concentrations of PM10, PM2.5, and PM1 were 76.55 ± 23.08 µg/m3, 41.81 ± 9 µg/m3, and 30.38 ± 7.56 µg/m3, respectively. The concentrations were observed to be high during morning and evening hours due to the increased traffic on the adjacent road and inside the fuel station. The synergistic health risks linked with long-term exposure to high concentrations of BTEX and PM were also estimated. At the fuel station, a significant contribution to the SOA formation potential was shown by toluene, followed by m-xylene, p-xylene, o-xylene, ethylbenzene, and benzene. Furthermore, the deposition of airborne particles in the workers' respiratory tract was calculated using the Multiple Path Particle Dosimetry model while considering the daily average exposure duration of 12 h. The results showed that 59% of PM10 particles were deposited in the head region, whereas 11% and 10% of PM2.5 and PM1 particles were deposited in the pulmonary region. Hence, the health risk assessment indicated no non-cancer risk of exposure to PM (hazard quotient = 0.13) to station personnel exposed regularly for 1 year. However, prolonged exposure to VOCs for more than 1 year can result in both carcinogenic and non-carcinogenic risk (hazard quotient = 0.045 and cancer risk > 10-6) in workers.

[Characteristics and Health Risk Assessment of Volatile Organic Compounds in Different Functional Zones in Baoji in Summer].

The situation of air pollution in Guanzhong Plain has been increasing in recent years; hence, it is very important to study the characteristics of volatile organic compounds (VOCs) and their health risks in urban functional zones. We analyzed 115 VOCs using gas chromatography-mass spectrometry/hydrogen ion flame detector (GC-MS/FID) and high performance liquid chromatography (HPLC) at four sampling sites in the traffic, comprehensive, industrial, and scenic zones of Baoji. We analyzed the main components and key species in the different functional zones. Ozone formation potential (OFP),·OH consumption rate (L·OH), and secondary organic aerosol formation potential (SOAFP) were used to evaluate the environmental impact, and the hazard index (HI) and lifetime cancer risk (LCR) methods were employed. The results revealed that the mean values of φ(TVOCs) in the traffic, comprehensive, industrial, and scenic zones were (59.63±23.85)×10-9, (42.92±11.88)×10-9, (60.27±24.09)×10-9, and (55.54±7.44)×10-9, respectively. The dominant contributors at the traffic zone were alkanes, and those at the other functional zones were OVOCs. Acetaldehyde, acetone, n-butane, and isopentane were abundant at different functional zones. According to the characteristic ratios of VOCs, the average ratio of toluene to benzene (T/B) at the traffic, comprehensive, industrial, and scenic zones were 1.84, 2.39, 1.28, and 1.64, respectively, and the ratio of iso-pentane to n-pentane (i/n) was mainly between 1 and 4. The results indicated that VOCs in Baoji were significantly affected by vehicle emissions and gasoline evaporation, biomass and coal combustion, and industrial coatings and foundry. The ratio of m/p-xylene to ethylbenzene (X/E) was lower than 2 at the four functional zones, and the minimum was 1.79 at the scenic zones; the results revealed that X/E was small, and the aging degree of air masses was high, indicating the influence of regional transport. According to the ratio of formaldehyde to acetaldehyde (C1/C2) and the ratio of acetaldehyde to propanal (C2/C3), it was suggested that there may have been evident anthropogenic emission sources, and the photochemical reaction had an important effect on aldehydes and ketones. Environmental impact assessment results revealed that OVOCs and alkenes contributed significantly to OFP and OFP from large to small was as follows:industrial zone>scenic zone>traffic zone>comprehensive zone. The range of L·OH in each functional zone was 8.77-15.82 s-1, with isoprene contributing the most in the industrial zone and acetaldehyde contributing the most at other functional zones. The SOAFP of each functional zone was as follows:scenic zone>comprehensive zone>traffic zone>industrial zone. Toluene, m/p-xylene, and isoprene were the notable species. According to the health risk assessment of EPA, the HI of toxic VOCs in all functional zones was lower than 1, which was at an acceptable level. However, the number of days with HI>1 in industrial zones accounted for 42.86% of the total sampling days, indicating a high risk. The lifetime carcinogenic risk (LCR) of the traffic, comprehensive, industrial, and scenic zones were 1.83×10-5, 1.21×10-5, 1.85×10-5, and 1.63×10-5, respectively, which were all in grade Ⅲ of the rating system, indicating a high probability of cancer risk. Species with LCR greater than 10-6 were formaldehyde; acetaldehyde; 1,2-dibromoethane; 1,2-dichloroethane; 1,2-dichloropropane; and chloroform.

Microbial metabolism and health risk assessment of kitchen waste odor VOCs.

Kitchen waste (KW) generates odors comprising complex volatile organic compounds (VOCs). We used gas chromatography-mass spectrometry to analyze VOCs, and 16S gene sequencing was used to analyze the microbial community composition and microbial metabolic mechanism. The results showed that the major odor-causing VOCs were hydrogen sulfide, methanethiol, methyl sulfide, dimethyl disulfide, and ethyl acetate. As the temperature increased, the VOCs and microbial community composition became more complex, and the microbial community related to VOC production included Leuconostoc, Pediococcus, Acetobacter, and Weissella. Based on PICRUSt2 analysis, the possibility of typical VOC interconversion by microbial metabolism was low. It was more likely that precursor substances were catalyzed by enzymes to generate the corresponding VOCs. Attention should be given to trichloromethane and 1,2-dichloroethane, which may cause adverse health effects through long-term inhalation. The study results provide guidance for controlling VOCs from KW.

Assessment of atmospheric levels of carbonyls in an urban environment of Argentina.

It is well-documented that carbonyl compounds have adverse effects on human health. On the other hand, these oxygenated volatile organic compounds (OVOCs) are precursors of secondary pollutants such as tropospheric ozone or peroxy acetyl nitrate (PAN). In particular, formaldehyde, the simplest carbonyl, is the most abundant carbonyl in the air generated from the degradation of most volatile organic compounds (VOCs). This work presents for the first time the characterization and determination of levels of carbonyl compounds by passive monitoring performed from April-December 2021 in the city of Córdoba, Argentina, the second most populated Mediterranean city located in the center of the country. Annual concentrations, considering the 11 carbonyls measured, were in the range of 0.13-8.75 µgm-3. Formaldehyde and acetaldehyde were the carbonyls detected in the highest annual average concentrations of 4.44 ± 1.75 µgm-3 and 3.85 ± 1.44 µgm-3, respectively. These carbonyls represent a contribution of around 40-57% on total carbonyls measured. Statistical analysis to determine significant differences and Pearson correlations with the meteorological parameters were performed. Spring and summer were found to be the seasons with the highest carbonyl concentration linked to forest fire episodes, especially in springtime. The values for the C1/C2 and C2/C3 ratios showed that sources of carbonyl formation are anthropogenic. In addition, the prop-Equiv concentration was determined, where formaldehyde and acetaldehyde were the main producers of tropospheric ozone. The ozone formation potential (OFP) showed that spring and summer are the seasons where carbonyls contribute to the formation of tropospheric ozone.This study represents a first approach of the carbonyl concentration in the city and of the influence of meteorological parameters on the behavior of carbonyls.

Recent Advances in Gas Detection Methodologies with a Special Focus on Environmental Sensing and Health Monitoring Applications─A Critical Review.

With the expansion of the Internet-of-Things (IoT), the use of gas sensors in the field of wearable technology, smart devices, and smart homes has increased manifold. These gas sensors have two key applications─one is the detection of gases present in the environment and the other is the detection of Volatile Organic Compounds (VOCs) that are found in the breath. In this review, we focus systematically on the advancements in the field of various spectroscopic methods such as mass spectrometry-based analysis and point-of-care approach to detect VOCs and gases for environmental monitoring and disease diagnosis. Additionally, we highlight the development of smart sensors that work on the principle of electrochemical detection and provide examples of the same through an extensive literature review. At the end of this review, we highlight various challenges and future perspectives.

Long-term in situ air quality assessment in closed environments: A gas chromatography-ion mobility spectrometry applicability study.

Contemporary life is mostly spent in indoor spaces like private houses, workplaces, vehicles and public facilities. Nonetheless, the air quality in these closed environments is often poor which leads to people being exposed to a vast range of toxic and hazardous compounds. Volatile organic compounds (VOCs) are among the main factors responsible for the lack of air quality in closed spaces and, in addition, some of them are particularly hazardous to the human organism. Considering this fact, we conducted daily in situ air analyses over 1 year using a gas chromatography-ion mobility spectrometry (GC-IMS) device in an indoor location. The obtained results show that 10 VOCs were consistently present in the indoor air throughout the entire year, making them particularly important for controlling air quality. All of these compounds were successfully identified, namely acetic acid, acetone, benzene, butanol, ethanol, isobutanol, propanoic acid, propanol, 2-propanol and tert-butyl methyl ether. The behaviour of the total VOCs (tVOCs) intensity during the period of analysis and the relative variation between consecutive months were studied. It was observed that the overall trend of tVOCs closely mirrored the variation of air temperature throughout the year suggesting their strong correlation. The results obtained from this study demonstrate the high quality and relevance of the data, highlighting the suitability of GC-IMS for in situ long-term air quality assessment in indoor environments and, consequently, for identifying potential health risks for the human organism in both short-term and long-term exposure scenarios.