A novel chitosan antioxidant bearing sulfhydryl group: Synthesis, characterization and activity assessment.

To improve the antioxidant activity, sulfhydryl groups (-SH) were introduced into chitosan. Acylated chitosan derivatives, chitosan cationic salt derivatives, hydroxypropyl trimethylammonium chloride chitosan quaternary ammonium salt (HACC) derivatives and N,N,N-trimethyl chitosan iodine (TMC) derivatives were obtained. The chitosan derivatives were characterized by FTIR and 1H NMR to confirm the successful synthesis. Ellman's reagent was used to determine that the compound contained free sulfhydryl groups. The water solubility and thermal stability of chitosan and derivatives were evaluated. The antioxidant activities of the derivatives were verified, including DPPH radical scavenging activity, superoxide anion radical scavenging activity and reducing power activity. The novel chitosan derivatives showed excellent antioxidant activities. Toxicity assay used L929 cells proved that the derivatives had no significant toxic. The results showed that the chitosan derivatives bearing sulfhydryl groups described in this paper has a certain antioxidant effect, which provides a practical approach for further study of chitosan.

Atom Economical QPCs: Phenyl-Free Biscationic Quaternary Phosphonium Compounds as Potent Disinfectants.

Quaternary ammonium compounds (QACs) are vital disinfectants for the neutralization of pathogenic bacteria in clinical, domestic, and commercial settings. After decades of dependence on QACs, the emergence of antimicrobial resistance to this class of compounds threatens the ability of existing QAC products to effectively manage rising bacterial threats. The need for new disinfectants is therefore urgent, with quaternary phosphonium compounds (QPCs) emerging as a new class of promising antimicrobials that boast significant activity against highly resistant bacteria. Reported here is a series of twenty-one novel QPCs that replace phenyl substituents on the phosphorus center with alkyl groups yet allow for rapid synthetic routes in high yields. Within this series are structures containing methyl, ethyl, or cyclohexyl phosphonium substituents on bisphosphane scaffolds bearing ethyl linkers, affording atom economical structures and ones that represent exact analogs to nitrogenous amphiphiles. The resultant bisQPC structures display high antibacterial efficacy enjoyed by comparably constructed QACs, with three structures in the single-digit micromolar activity range despite structural simplification.

Boosted sono-oxidative catalytic degradation of Brilliant green dye by magnetic MgFe2O4 catalyst: Degradation mechanism, assessment of bio-toxicity and cost analysis.

The magnetic MgFe2O4 nanoparticles (NPs) were fabricated via a facile co-precipitation technique and was comprehensively characterized by XRD, FTIR, SEM, EDX and VSM. The prepared NPs were used as catalyst in presence of ultrasound (US) irradiation to activate persulfate (PS) for generation of sulfate radicals (SO4·-) for boosted degradation of toxic Brilliant Green (BG) dye. Preliminary experiments revealed that highest BG dye degradation efficiency of 91.63% was achieved at MgFe2O4 catalyst dose of 1.0 g/L, PS dose of 300 mg/L, and initial dye concentration of 70 ppm within 15 min of US irradiation. However, only US, US in presence of PS oxidation and US in presence of MgFe2O4 catalyst have shown 20.2%, 83.6% and 45.0% of BG dye removal, respectively. Furthermore, response surface methodology (RSM) based central composite design (CCD) was executed to investigate the effect of interaction between independent variables such as MgFe2O4 catalyst dose (0.5-1.5 g/L), PS dose (150-350 mg/L), initial BG dye concentration (50-150 ppm) and US irradiation time (4-12 min). The RSM based quadratic model was used to predict the experimental data, and the prediction accuracy was confirmed by analysis of variance (R2 = 0.98). The established RSM model has predicted the optimum experimental conditions as MgFe2O4 catalyst dose of 0.75 g/L, PS dose of 300 mg/L, initial dye concentration of 75 ppm and sonication time of 10 min. Subsequently, the treatment cost analysis was performed for all thirty experimental runs of CCD, and the RSM predicted response was found to be evidently optimum as this has delivered best economic condition (140 $/kg of BG removed) with respect to relative dye removal (%). COD removal and residual sulfate analysis have demonstrated satisfactory reduction of COD (90.31%) as well as sulfate ions (42.87 ppm) in the dye solution after treatment. Results of degradation pathway analysis portrayed the transformation of BG molecule (M/Z ratio 385) into simpler fractions with M/Z ratio of 193, 161, 73, and 61. Moreover, the toxicity analysis revealed that sono-catalytically activated PS system has efficiently reduced the toxicity level of BG dye from 93.9% to 5.13%.

Insights on Molecular Characteristics of Hydrochars by 13C-NMR and Off-Line TMAH-GC/MS and Assessment of Their Potential Use as Plant Growth Promoters.

Hydrochar is a carbon-based material that can be used as soil amendment. Since the physical-chemical properties of hydrochar are mainly assigned to process parameters, we aimed at evaluating the organic fraction of different hydrochars through 13C-NMR and off-line TMAH-GC/MS. Four hydrochars produced with sugarcane bagasse, vinasse and sulfuric or phosphoric acids were analyzed to elucidate the main molecular features. Germination and initial growth of maize seedlings were assessed using hydrochar water-soluble fraction to evaluate their potential use as growth promoters. The hydrochars prepared with phosphoric acid showed larger amounts of bioavailable lignin-derived structures. Although no differences were shown about the percentage of maize seeds germination, the hydrochar produced with phosphoric acid promoted a better seedling growth. For this sample, the greatest relative percentage of benzene derivatives and phenolic compounds were associated to hormone-like effects, responsible for stimulating shoot and root elongation. The reactions parameters proved to be determinant for the organic composition of hydrochar, exerting a strict influence on molecular features and plant growth response.

Cellulose Dissolution in Mixtures of Ionic Liquids and Dimethyl Sulfoxide: A Quantitative Assessment of the Relative Importance of Temperature and Composition of the Binary Solvent.

We studied the dissolution of microcrystalline cellulose (MCC) in binary mixtures of dimethyl sulfoxide (DMSO) and the ionic liquids: allylbenzyldimethylammonium acetate; 1-(2-methoxyethyl)-3-methylimidazolium acetate; 1,8-diazabicyclo [5.4.0]undec-7-ene-8-ium acetate; tetramethylguanidinium acetate. Using chemometrics, we determined the dependence of the mass fraction (in %) of dissolved cellulose (MCC-m%) on the temperature, T = 40, 60, and 80 °C, and the mole fraction of DMSO, χDMSO = 0.4, 0.6, and 0.8. We derived equations that quantified the dependence of MCC-m% on T and χDMSO. Cellulose dissolution increased as a function of increasing both variables; the contribution of χDMSO was larger than that of T in some cases. Solvent empirical polarity was qualitatively employed to rationalize the cellulose dissolution efficiency of the solvent. Using the solvatochromic probe 2,6-dichloro-4-(2,4,6-triphenylpyridinium-1-yl)phenolate (WB), we calculated the empirical polarity ET(WB) of cellobiose (a model for MCC) in ionic liquid (IL)-DMSO mixtures. The ET(WB) correlated perfectly with T (fixed χDMSO) and with χDMSO (fixed T). These results show that there is ground for using medium empirical polarity to assess cellulose dissolution efficiency. We calculated values of MCC-m% under conditions other than those employed to generate the statistical model and determined the corresponding MCC-m% experimentally. The excellent agreement between both values shows the robustness of the statistical model and the usefulness of our approach to predict cellulose dissolution, thus saving time, labor, and material.

Assessment of ecological hazards and environmental fate of disinfectant quaternary ammonium compounds.

Disinfectant quaternary ammonium compounds (Quats) have diverse uses in a variety of consumer and commercial products, particularly cleaning products. With the emergence of the COVID-19 pandemic, they have become a primary tool to inactivate the SARS-CoV-2 virus on surfaces. Disinfectant Quats have very low vapor pressure, and following the use phase of the products in which they are found, disposal is typically "down-the-drain" to wastewater treatment systems. Consequently, the potential for the greatest environmental effect is to the aquatic environment, from treated effluent, and potentially to soils, which might be amended with wastewater biosolids. Among the earliest used and still common disinfectant Quats are the alkyl dimethyl benzyl ammonium chloride (ADBAC) compounds and the dialkyl dimethyl ammonium chloride (DDAC) compounds. They are cationic surfactants often found in consumer and commercial surface cleaners. Because of their biocidal properties, disinfectant Quats are heavily regulated for human and environmental safety around the world. Consequently, there is a robust database of information regarding the ecological hazards and environmental fate of ADBAC and DDAC; however, some of the data presented are from unpublished studies that have been submitted to and reviewed by regulatory agencies (i.e., EPA and European Chemicals Agency) to support antimicrobial product registration. We summarize the available environmental fate data and the acute and chronic aquatic ecotoxicity data for freshwater species, including algae, invertebrates, fish, and plants using peer-reviewed literature and unpublished data submitted to and summarized by regulatory agencies. The lower limit of the range of the ecotoxicity data for disinfectant Quats tends to be lower than that for other surface active agents, such as nonionic or anionic surfactants. However, ecotoxicity is mitigated by environmental fate characteristics, the data for which we also summarize, including high biodegradability and a strong tendency to sorb to wastewater biosolids, sediment, and soil. As a result, disinfectant Quats are largely removed during wastewater treatment, and those residues discharged in treated effluent are likely to rapidly bind to suspended solids or sediments, thus mitigating their toxicity.

Assessment of a New Ginsenoside Rh2 Nanoniosomal Formulation for Enhanced Antitumor Efficacy on Prostate Cancer: An in vitro Study.

INTRODUCTION: Ginsenoside Rh2, purified from the Panax ginseng root, has been demonstrated to possess anticancer properties against various cancerous cells including colorectal, breast, skin, ovarian, prostate, and liver cancerous cells. However, the poor bioavailability, low stability on gastrointestinal systems, and fast plasma elimination limit further clinical applications of Ginsenoside Rh2 for cancer treatments. In this study, a novel formulation of niosomal Ginsenoside Rh2 was prepared using the thin film hydration technique. METHODS: The niosomal formulation contained Span 60 and cholesterol, and cationic lipid DOTAP was evaluated by determining particle size distribution, encapsulation efficiency, the polydispersity index (PDI), and surface morphology. The cytotoxic effects of free Ginsenoside Rh2 and Ginsenoside Rh2-loaded niosomes were determined using the MTT method in the PC3 prostate cancer cell line. For the investigation of the in vitro cellular uptake of Ginsenoside Rh2-loaded niosome, two formulations were prepared: the Ginsenoside Rh2-loaded niosomal formula containing 5% DOTAP and the Ginsenoside Rh2-loaded niosomal formula without DOTAP. RESULTS: The mean size, DPI, zeta potential, and encapsulation efficiency of the Ginsenoside Rh2-loaded nanoniosomal formulation containing DOTAP were 93.5±2.1 nm, 0.203±0.01, +4.65±0.65, and 98.32% ±2.4, respectively. The niosomal vesicles were found to be round and have a smooth surface. The release profile of Ginsenoside Rh2 from niosome was biphasic. Furthermore, a two-fold reduction in the Ginsenoside Rh2 concentration was measured when Ginsenoside Rh2 was administered in a nanoniosomal form compared to free Ginsenoside Rh2 solutions in the PC3 prostate cancer cell line. After storage for 90 days, the encapsulation efficiency, vesicle size, PDI, and zeta potential of the optimized formulation did not significantly change compared to the freshly prepared samples. The cellular uptake experiments of the niosomal formulation demonstrated that by adding DOTAP to the niosomal formulation, the cellular uptake was enhanced. DISCUSSION: The enhanced cellular uptake and cytotoxic activity of the Ginsenoside Rh2 nanoniosomal formulation on the PC3 cell make it an attractive candidate for application as a nano-sized delivery vehicle to transfer Ginsenoside Rh2 to cancer cells.

First-in-Human Assessment of cRGD-ZW800-1, a Zwitterionic, Integrin-Targeted, Near-Infrared Fluorescent Peptide in Colon Carcinoma.

PURPOSE: Incomplete oncologic resections and damage to vital structures during colorectal cancer surgery increases morbidity and mortality. Moreover, neoadjuvant chemoradiotherapy has become the standard treatment modality for locally advanced rectal cancer, where subsequent downstaging can make identification of the primary tumor more challenging during surgery. Near-infrared (NIR) fluorescence imaging can aid surgeons by providing real-time visualization of tumors and vital structures during surgery. EXPERIMENTAL DESIGN: We present the first-in-human clinical experience of a novel NIR fluorescent peptide, cRGD-ZW800-1, for the detection of colon cancer. cRGD-ZW800-1 was engineered to have an overall zwitterionic chemical structure and neutral charge to lower nonspecific uptake and thus background fluorescent signal. We performed a phase I study in 11 healthy volunteer as well as a phase II feasibility study in 12 patients undergoing an elective colon resection, assessing 0.005, 0.015, and 0.05 mg/kg cRGD-ZW800-1 for the intraoperative visualization of colon cancer. RESULTS: cRGD-ZW800-1 appears safe, and exhibited rapid elimination into urine after a single low intravenous dose. Minimal invasive intraoperative visualization of colon cancer through full-thickness bowel wall was possible after an intravenous bolus injection of 0.05 mg/kg at least 2 hours prior to surgery. Longer intervals between injection and imaging improved the tumor-to-background ratio. CONCLUSIONS: cRGD-ZW800-1 enabled fluorescence imaging of colon cancer in both open and minimal invasive surgeries. Further development of cRGD-ZW800-1 for widespread use in cancer surgery may be warranted given the ubiquitous overexpression of various integrins on different types of tumors and their vasculature.

Assessment of aloe vera for qualitative fit testing of particulate respirators: a logistic regression approach.

Fit testing procedure is required for filtering facepiece respirators (FFRs) to ascertain an acceptable fit between the skin and facepiece sealing surface. The present study seeks to compare the efficacy of Aloe vera (A. vera) and commercial BitrexTM as challenge agents of qualitative fit testing of particulate respirators. An herbal solution consisting of A. vera at seven different concentrations was developed. Threshold Screening Tests (TSTs) of A. vera solutions were compared to BitrexTM. To do so, solutions were administered randomly on a total of 62 participants. A placebo was also tested to ensure the taste response being valid. Statistical analysis was performed using R 3.2.5.0 software. There were no statistically significant differences between the A. vera (41.7, 58.3, 75, and 91.7 mg/ml) and BitrexTM threshold tests. Therefore, the minimum concentration of A. vera to develop the threshold solution was considered to be 41.7 mg/ml. When commercial products are expensive and unavailable, a cost-effective technique would be to replace A. vera solution with a commercial product as a challenge agent of qualitative fit testing of respirators.

Assessment of the Efficacy of Tributylammonium Alginate Surface-Modified Polyurethane as an Antibacterial Elastomeric Wound Dressing for both Noninfected and Infected Full-Thickness Wounds.

Risk factors of nonhealing wounds include persistent bacterial infections and rapid onset of dehydration; therefore, wound dressings should be used to accelerate the healing process by helping to disinfect the wound bed and provide moisture. Herein, we introduce a transparent tributylammonium alginate surface-modified cationic polyurethane (CPU) wound dressing, which is appropriate for full-thickness wounds. We studied the physicochemical properties of the dressing using Fourier transform infrared, 1H NMR, and 13C NMR spectroscopies and scanning electron microscopy, energy-dispersive X-ray, and thermomechanical analyses. The surface-modified polyurethane demonstrated improved hydrophilicity and tensile Young's modulus that approximated natural skin, which was in the range of 1.5-3 MPa. Cell viability and in vitro wound closure, assessed by MTS and the scratch assay, confirmed that the dressing was cytocompatible and possessed fibroblast migratory-promoting activity. The surface-modified CPU had up to 100% antibacterial activity against Staphylococcus aureus and Escherichia coli as Gram-positive and Gram-negative bacteria, respectively. In vivo assessments of both noninfected and infected wounds revealed that the surface-modified CPU dressing resulted in a faster healing rate because it reduced the persistent inflammatory phase, enhanced collagen deposition, and improved the formation of mature blood vessels when compared with CPU and commercial Tegaderm wound dressing.

Cationic starch: Safe and economic harvesting flocculant for microalgal biomass and inhibiting E. coli growth.

Cationized starch-based flocculation processes are the subject of increasing attention because of their non-toxicity, biodegradability and relatively low price synthesized. The study aimed to evaluate the flocculability of different cationic starches using different concentrations of glycidyltrimethylammonium chloride (GTAC) with different degree of substitution (DS) ranged from 0.13 to 0.57. Cationized starch were characterized using Fourier Transform Infrared (FTIR), scanning electron microscopy (SEM) and toxicity checked using experimental animal procedure. They were used in comparison with aluminum sulphate for harvesting microalgal biomass collected from high rate algal pond (HRAP) at Zenin wastewater treatment plant (WWTP), Giza, Egypt. Jar test showed that gradual increase of aluminum sulphate doses (50-400 mg/L) has reduced algal suspension consequently turbidity with accompanied pH decrease from 8.6 to 6.6. Cationic starch with low DS has shown efficiency as flocculants by reducing turbidity of algal suspension from 110 to ≈2 NTU by gradual increase from 10 to 60 mg/L without change in pH value. Fecal coliforms and E. coli were inhibited from 9.6 × 102 and 8.4 × 10 CFU/ml to non-detectable count. Cationic starch with high DS (0.57) has the least effect of algae harvesting and turbidity reduction that 40 NTU after increase the dose to 60 mg/L. Results showed that 10 mg of cationic starch (DS = 0.13) has achieved the same flocculation efficiency of 100 mg of aluminum sulphate. In conclusion, further investigation is required to increase the degree of substitution of cationic starch, consequently the flocculation efficiency might be improved.

The comparative study of micellar TLC and RP-TLC as potential tools for lipophilicity assessment based on QSRR approach.

Lipophilicity of compound is well known as vital physicochemical property of a molecule, which determines its biological activity. Nonetheless, the assessment of a lipophilicity is still problematic and focuses attention of scientists. Although, the shake-flask method is still considered as a gold standard for experimental determination of lipophilicity, currently the chromatographic approach is mostly used. Among chromatographic methods used for lipophilicity assessment, thin layer chromatography (TLC) is still one of the most popular tools. The main goal of this study was to compare classical reversed-phase thin layer chromatography (RP-TLC) and micellar TLC as potential tools for lipophilicity assessment. Micellar liquid chromatography has significantly lover environment impact than classical reversed-phase liquid chromatography. Additionally comparison of cationic and anionic surfactants (CTAB and SDS), which have different chemical properties, as modifiers of mobile phase in micellar TLC were investigated. The Quantitative Structure-Retention Relationships (QSRR) approach was used in order to present molecular mechanisms of retention in investigated chromatographic systems. The study was based on chemically diverse model set compounds, with a proved therapeutic or toxic potential. According to obtained results the micellar TLC with CTAB as surfactant can be recommended to logP prediction. The obtained QSRR models indicated that adsorption of CTAB monomers on CN modified surface of silica gel and the silanol-quaternary ammonium interactions are possible. Consequently, the reduction of interaction between molecules and free silanol, contributes to the improvement of logP predictions. These result were confirmed by regression and classification methods.

Safety Assessment of Polyquaternium-22 and Polyquarternium-39 as Used in Cosmetics.

Polyquaternium-22 and polyquaternium-39 are polymers that function as antistatic agents, film formers, and hair fixatives in cosmetic products. These ingredients are being used at concentrations up to 2% (polyquaternium-22, in a rinse-off product) and up to 3% (polyquaternium-39, in rinse-off and leave-on products). The unreacted monomer content of these ingredients was considered low and of no toxicological concern. Limited data showed no skin irritation/sensitization. Although these ingredients were nongenotoxic in bacterial assays, mammalian genotoxicity, carcinogenicity, and reproductive and developmental toxicity data were not available. These polymers, however, are large, highly polar molecules that would likely not be absorbed, and neither local effects in the respiratory tract nor systemic toxicity are expected following product application/exposure. The Expert Panel concluded that polyquaternium-22 and polyquaternium-39 are safe in the present practices of use and concentration in cosmetic formulations.

Assessment of maturity indices of rock phosphate enriched composts using variable crop residues.

This study aimed to asses maturity indices of rock phosphate enriched composts using crop residues having variable C/N ratios. There were distinct differences in concentration of NH4+-N, NO3--N, Olsen-P and NH4OAc-K for composts generated from different crop residues, the highest being in rice straw. Water soluble P varied from 3.47-4.45% of total P, while citrate soluble P varied from 32.7-54.0% of total P. Rice straw composts showed lower C/N, WSC/Org-N and E4/E6 ratio and higher germination index indicating that they are well-matured and stabilized compost. The relative order of performance of crop residues in aggrading compost quality was chickpea stover>rice straw>mustard stover>wheat straw>tree leaves. The results demonstrated that all the enriched composts had higher contents of available nutrients and quality indices, indicating that enriched composts could be used to substitute costly chemical fertilizers for crop production.

LC-MS/MS and GC-MS methods in propofol detection: Evaluation of the two analytical procedures.

Propofol is a short-acting hypnotic agent that is commonly used to induce and maintain anesthesia. Propofol abuse and its involvement in suicide deaths have increased in recent years, especially among healthcare personnel. An example is the suicide of a 61-year-old nurse found with a propofol drip in his left arm. We describe the postmortem concentration of propofol in various tissues (femoral and cardiac blood, bile, urine, brain, and liver) and in the drip. The toxicological analyses were performed through two analytical methods, differing in derivatization reaction and in instrumentation: silylation for gas chromatograph-mass spectrometer (GC-MS), as routinely performed in our laboratory for this kind of analyses (lower limits of quantification-LLOQ-in urine and blood: 0.3 and 5ng/ml); for liquid chromatograph-tandem mass spectrometer (LC-MS/MS) an innovative azo-coupling derivatization (LLOQ: 0.0004 and 0.1ng/ml). This latter produces an azo-derivative (molecular composition: C18H22ON2; molecular weight: 282Da) highly ionizable in electro-spray ion source, both in negative and positive ionizations. These two methods were compared to evaluate the effectiveness of this new LC-MS/MS analysis. An acidic hydrolysis (HCl 6N, 100°C, and 1h) was performed for the biological samples (1ml or 1g) irrespective of the analytical method applied. The drip content was extracted adding phosphate buffer (pH 8) and a dichloromethane/ethylacetate 8:2 (v:v) mixture. Derivatization steps were: silylation with N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA)+tetramethylammonium hydroxide (TMAH) for GC-MS; regarding LC-MS/MS, azo-coupling reaction with the aryl-diazonium salt (0-5°C, and 30min). The analyses were achieved in selected-ion monitoring for GC-MS (m/z, 235,250,73 propofol"; m/z, 252,267,27 propofol-d17) and in multiple reaction monitoring ([M-H](-): m/z 283→241,77, azo-propofol; m/z 299→251,77, azo-propofol-d17) for LC-MS/MS. Autopsy showed no significant findings. Propofol concentrations were (LC-MS/MS vs GC-MS, respectively): 15.1 vs 14.5mg/ml, drip content; 7.11 vs 6.07µg/ml, cardiac blood; 9.50 vs 7.19µg/ml, femoral blood; 0.64 vs 1.07µg/ml, bile; 0.042 vs 0.051µg/ml urine; 4.93 vs 5.89µg/g, brain; and 7.88 vs 6.80µg/g, liver. These values are comparable with the ones described in literature for death by acute propofol intoxication; the drip content is compatible with a diluted formulation of propofol available in Italy (20mg/ml injectable emulsion). The comparison shows an excellent fitting of the data (R(2): 0.9362). Toxicological results proved the cause of death as acute propofol intoxication. Furthermore, the new LC-MS/MS method showed an excellent effectiveness and reliability when compared to the routinely used GC-MS method.

Modeling the self-assembly of silica-templated nanoparticles in the initial stages of zeolite formation.

The reaction ensemble Monte Carlo method was used to model the self-assembly and structure of silica nanoparticles found in the initial stages of the clear-solution synthesis of the silicalite-1 zeolite. Such nanoparticles, which comprise both silica and organic structure-directing agents (OSDAs), are believed to play a crucial role in the formation of silica nanoporous materials, yet very limited atomic-level structural information is available for these nanoparticles. We have modeled silica monomers as flexible tetrahedra with spring constants fitted in previous work to silica bulk moduli and OSDAs as spheres attracted to anionic silica monomers. We have studied one-step and two-step formation mechanisms, the latter involving the initial association of silica species and OSDAs driven by physical solution forces, followed by silica condensation/hydrolysis reactions simulated with reaction ensemble Monte Carlo. The two-step process with preassociation was found to be crucial for generating nearly spherical nanoparticles; otherwise, without preassociation they exhibited jagged, ramified structures. The two-step nanoparticles were found to exhibit a core-shell structure with mostly silica in the core surrounded by a diffuse shell of OSDAs, in agreement with SANS and SAXS data. The Qn distribution, quantifying silicon atoms bound to n bridging oxygens, found in the simulated nanoparticles is in broad agreement with (29)Si solid-state NMR data on smaller, 2 nm nanoparticle populations. Ring-size distributions from the simulated nanoparticles show that five-membered rings are prevalent when considering OSDA/silica mole fractions (∼0.2) that lead to silicalite-1, in agreement with a previous IR and modeling study. Nanoparticles simulated with higher OSDA concentrations show ring-size distributions shifted to smaller rings, with three-membered silica rings dominating at an OSDA/silica mole fraction of 0.8. Our simulations show no evidence of long-range silicalite-1 order in these nanoparticles.

Near-infrared fluorescent digital pathology for the automation of disease diagnosis and biomarker assessment.

Hematoxylin-eosin (H&E) staining of tissue has been the mainstay of pathology for more than a century. However, the learning curve for H&E tissue interpretation is long, whereas intra- and interobserver variability remain high. Computer-assisted image analysis of H&E sections holds promise for increased throughput and decreased variability but has yet to demonstrate significant improvement in diagnostic accuracy. Addition of biomarkers to H&E staining can improve diagnostic accuracy; however, coregistration of immunohistochemical staining with H&E is problematic as immunostaining is completed on slides that are at best 4 µm apart. Simultaneous H&E and immunostaining would alleviate coregistration problems; however, current opaque pigments used for immunostaining obscure H&E. In this study, we demonstrate that diagnostic information provided by two or more independent wavelengths of near-infrared (NIR) fluorescence leave the H&E stain unchanged while enabling computer-assisted diagnosis and assessment of human disease. Using prostate cancer as a model system, we introduce NIR digital pathology and demonstrate its utility along the spectrum from prostate biopsy to whole mount analysis of H&E-stained tissue.

Toxicity assessment of ionic liquids with Vibrio fischeri: an alternative fully automated methodology.

A fully automated Vibrio fischeri methodology based on sequential injection analysis (SIA) has been developed. The methodology was based on the aspiration of 75 µL of bacteria and 50 µL of inhibitor followed by measurement of the luminescence of bacteria. The assays were conducted for contact times of 5, 15, and 30 min, by means of three mixing chambers that ensured adequate mixing conditions. The optimized methodology provided a precise control of the reaction conditions which is an asset for the analysis of a large number of samples. The developed methodology was applied to the evaluation of the impact of a set of ionic liquids (ILs) on V. fischeri and the results were compared with those provided by a conventional assay kit (Biotox(®)). The collected data evidenced the influence of different cation head groups and anion moieties on the toxicity of ILs. Generally, aromatic cations and fluorine-containing anions displayed higher impact on V. fischeri, evidenced by lower EC50. The proposed methodology was validated through statistical analysis which demonstrated a strong positive correlation (P>0.98) between assays. It is expected that the automated methodology can be tested for more classes of compounds and used as alternative to microplate based V. fischeri assay kits.

Aptasensor for electrochemical sensing of angiogenin based on electrode modified by cationic polyelectrolyte-functionalized graphene/gold nanoparticles composites.

Herein, a label-free and highly sensitive electrochemical aptasensor for the detection of angiogenin was proposed based on a conformational change of aptamer and amplification by poly(diallyldimethyl ammonium chloride) (PDDA)-functionalized graphene/gold nanoparticles (AuNPs) composites-modified electrode. PDDA-functionalized graphene (P-GR) nanosheets as the building block in the self-assembly of GR nanosheets/AuNPs heterostructure enhanced the electrochemical detection performance. The electrochemical aptasensor has an extraordinarily sensitive response to angiogenin in a linear range from 0.1pM to 5nM with a detection limit of 0.064pM. The developed sensor provides a promising strategy for the cancer diagnosis in medical application in the future.

Assessment of didecyldimethylammonium chloride as a ballast water treatment method.

Ballast water-mediated transfer of aquatic invasive species is considered a major threat to marine biodiversity, marine industry and human health. A ballast water treatment is needed to comply with International Maritime Organization (IMO) ballast water discharge regulations. Didecyldimethylammonium chloride (DDAC) was tested for its applicability as a ballast water treatment method. The treatment of the marine phytoplankton species Tetraselmis suecica, Isochrysis galbana and Chaetoceros calcitrans showed that at 2.5 µL L(-1) DDAC was able to inactivate photosystem II (PSII) efficiency and disintegrate the cells after 5 days of dark incubation. The treatment of natural marine plankton communities with 2.5 µL L(-1) DDAC did not sufficiently decrease zooplankton abundance to comply with the IMO D-2 standard. Bivalve larvae showed the highest resistance to DDAC. PSII efficiency was inactivated within 5 days but phytoplankton cells remained intact. Regrowth occurred within 2 days of incubation in the light. However, untreated phytoplankton exposed to residual DDAC showed delayed cell growth and reduced PSII efficiency, indicating residual DDAC toxicity. Natural marine plankton communities treated with 5 µL L(-1) DDAC showed sufficient disinfection of zooplankton and inactivation of PSII efficiency. Phytoplankton regrowth was not detected after 9 days of light incubation. Bacteria were initially reduced due to the DDAC treatment but regrowth was observed within 5 days of dark incubation. Residual DDAC remained too high after 5 days to be safely discharged. Two neutralization cycles of 50 mg L(-1) bentonite were needed to inactivate residual DDAC upon discharge. The inactivation of residual DDAC may seriously hamper the practical use of DDAC as a ballast water disinfectant.