Assessment of swallowability and acceptability of scored darunavir/cobicistat/emtricitabine/tenofovir alafenamide (D/C/F/TAF) fixed-dose combination (FDC) tablets in HIV-1-infected children aged ≥6 to <12 years, using matching placebo tablets: A randomized study.

BACKGROUND: Darunavir/cobicistat/emtricitabine/tenofovir alafenamide (D/C/F/TAF) fixed-dose combination (FDC) was developed as a once-daily, complete antiretroviral (ARV) regimen therapy to address the need for simplified protease inhibitor-based ARV regimens. This study assessed the swallowability and acceptability for long-term use of scored placebo tablets matching the D/C/F/TAF FDC tablets in children living with HIV-1. METHODS: This study (NCT04006704) was a Phase 1, open-label, randomized, single-dose, 2-period, 2-sequence crossover study in children living with HIV-1, aged ≥6 to <12 years and weighing ≥25 to <40 kg, on a stable ARV regimen for ≥3 months. Participants were asked to swallow whole (size, 21 × 11 × 7 mm) and split matching placebo D/C/F/TAF tablets. Swallowability of the matching placebo D/C/F/TAF tablets (primary endpoint) was assessed by observers. Acceptability of taking matching placebo D/C/F/TAF tablets and current ARVs was evaluated by participants using a 3-point questionnaire. Participants rated the acceptability for long-term daily use of the placebo D/C/F/TAF tablets, and observers assessed how easily caregivers could split a scored tablet by hand, using 3-point questionnaires. RESULTS: Among the 24 participants who enrolled and completed the study, 95.8% (23/24) were able to swallow the whole and split matching placebo D/C/F/TAF tablets after 1 or 2 attempts. Most participants (>70%) rated the acceptability of tablets for long-term daily use as acceptable or good to take. Breaking the tablets was considered easy or OK by 79.2% (19/24) of caregivers. CONCLUSION: Scored D/C/F/TAF FDC tablets are swallowable - with whole favoured over split - and considered at least acceptable for long-term daily intake in children living with HIV-1 aged ≥6 to <12 years. TRIAL REGISTRATION: ClinicalTrials.gov Identifier: NCT04006704.

Development of Losartan Orally Disintegrating Tablets by Direct Compression: a Cost-Effective Approach to Improve Paediatric Patient's Compliance.

The development of suitable dosage forms is essential for an effective pharmacological treatment in children. Orally disintegrating tablets (ODTs) are attractive dosage forms that avoid swallowing problems, ensure dosage accuracy and are easy to administer as they disintegrate in the oral cavity. This study aimed to develop ODTs containing losartan potassium (LP) for the treatment of arterial hypertension in children. The ODTs, produced by the cost-effective manufacturing process of direct compression, consisted of a mixture of diluent, superdisintegrant, glidant and lubricant. Five superdisintegrants (croscarmellose sodium, two grades of crospovidone, sodium starch glycolate and pregelatinized starch) were tested (at two concentrations), and combined with three diluents (mannitol, lactose and sorbitol). Thus, thirty formulations were evaluated based on disintegration time, hardness and friability. Two formulations, exhibiting the best results concerning disintegration time (< 30 s), hardness and friability (≤ 1.0%), were selected as the most promising ones for further evaluation. These ODTs presented favourable drug-excipient compatibility, tabletability and flow properties. The in vitro dissolution studies demonstrated 'very rapid' drug release. Preliminary stability studies highlighted the requirement of a protective packaging. All quality properties retained appropriate results after 12 months of storage in airtight containers. In conclusion, the ODTs were successfully developed and characterised, suggesting a potential means to accomplish a final prototype that enables an improvement in childhood arterial hypertension treatment.

Isoquinoline-based intrinsic fluorescence assessment of erythropoiesis-stimulating agent, Roxadustat (FG-4592), in tablets: applications to content uniformity and human plasma evaluation.

In the present study, a first validated and green spectrofluorimetric approach for its assessment and evaluation in different matrices was investigated. After using an excitation wavelength of 345 nm, Roxadustat (ROX) demonstrates a highly native fluorescence at an emission of 410 nm. The influences of experimental factors such as pH, diluting solvents, and different organized media were tested, and the most appropriate solvent choice was ethanol. It was confirmed that there was a linear relationship between the concentration of ROX and the relative fluorescence intensity in the range 60.0-1000.0 ng ml-1, with the limit of detection and limit of quantitation, respectively, being 17.0 and 53.0 ng ml-1. The mean recoveries % [±standard deviation (SD), n = 5] for pharmaceutical preparations were 100.11% ± 2.24%, whereas for plasma samples, they were 100.08 ± 1.08% (±SD, n = 5). The results obtained after the application of four greenness criteria, Analytical Eco-Scale metric, NEMI, GAPI, and AGREE metric, confirmed its eco-friendliness. In addition, the whiteness meter (RGB12) confirmed its level of sustainability. The International Council for Harmonisation (ICH) criteria were used to verify the developed method through the study in both spiked plasma samples and content uniformity evaluation. An appropriate standard for various applications in industry and quality control laboratories was developed.

A framework for the in silico assessment of the robustness of an MPC in a CDC line in function of process variability.

The shift from batch manufacturing towards continuous manufacturing for the production of oral solid dosages requires the development and implementation of process models and process control. Previous work focused mainly on developing deterministic models for the investigated system. Furthermore, the in silico tuning and analysis of a control strategy are mostly done based on deterministic models. This deterministic approach could lead to wrong actions in diversion strategies and poor transferability of the controller performance if the system behaves differently than the deterministic model. This work introduces a framework that explicitly includes the process variability which is characteristic of powder handling processes and tests it on a novel continuous feeding-blending unit (i.e., the FE continuous processing system (CPS)), followed by a tablet press (i.e., the FE 55). It employs a stochastic model by allowing the model parameters to have a probability distribution. The performance of a model predictive control (MPC), steering the feed rate of the main excipient feeder to compensate for the feed rate deviations of the active pharmaceutical ingredient (API) feeder to keep the API concentration close to the desired value, is evaluated and the impact of process variability is assessed in a Monte Carlo (MC) analysis. Next to the process variability, a model for the prediction error of the chemometric model and realistic feed rate disturbances were included to increase the transferability of the results to the real system. The obtained results show that process variability is inherently present and that wrong conclusions can be drawn if it is not taken into account in the in silico analysis.

Development of a highly sensitive and green first-derivative synchronous fluorescence spectroscopic method for the simultaneous quantification of telmisartan and rosuvastatin: Greenness metric assessment and application to a pharmacokinetic study in rats.

Hypertension and hyperlipidemia frequently coexist and are correlated with elevated cardiovascular adverse outcomes. Fixed dose combination tablets containing antihypertensive and antihyperlipidemic drugs have the potential to improve patient compliance. Telmisartan and rosuvastatin fixed dose combination tablet has been recently formulated. This study provided the first fluorescence spectroscopic method for simultaneously quantifying telmisartan and rosuvastatin in tablet dosage form and plasma. The native fluorescence spectra of telmisartan and rosuvastatin completely overlapped, making direct measurement unachievable. However, through the implementation of synchronous fluorescence measurements of telmisartan and rosuvastatin at a Δλ = 60, distinct narrow bands were observed at 358 nm and 375 nm, respectively. Regrettably, the challenge of overlapping remained unresolved. Nevertheless, by converting these synchronous spectra into first-order spectra, the problem of overlapping was completely resolved. This conversion also allowed for the selective quantification of telmisartan and rosuvastatin at 374 nm and 358 nm, respectively. The validity of this method was confirmed in accordance with ICH guidelines, yielding satisfactory results in terms of the validation characteristics. The method demonstrated linear relationships between the response and the studied drugs concentrations in working range of 50-1000 ng/mL for telmisartan and 100-2000 ng/mL for rosuvastatin. The described methodology was applied for the pharmacokinetic study of telmisartan and rosuvastatin in rat plasma after a single oral dose of 4 mg/kg telmisartan and 50 mg/kg rosuvastatin. Pharmacokinetic analyses revealed a moderate drug-drug interaction between the two drugs, which was not considered to be clinically significant. Moreover, the described method was assessed in terms of sensitivity and environmental sustainability against three previously documented methods. The comparison effectively underscores the supremacy of the proposed technique over the documented techniques.

Machine learning modeling for ultrasonic quality attribute assessment of pharmaceutical tablets for continuous manufacturing and real-time release testing.

In in-process quality monitoring for Continuous Manufacturing (CM) and Critical Quality Attributes (CQA) assessment for Real-time Release (RTR) testing, ultrasonic characterization is a critical technology for its direct, non-invasive, rapid, and cost-effective nature. In quality evaluation with ultrasound, relating a pharmaceutical tablet's ultrasonic response to its defect state and quality parameters is essential. However, ultrasonic CQA characterization requires a robust mathematical model, which cannot be obtained with traditional first principles-based modeling approaches. Machine Learning (ML) using experimental data is emerging as a critical analytical tool for overcoming such modeling challenges. In this work, a novel Deep Neural Network-based ML-driven Non-Destructive Evaluation (ML-NDE) modeling framework is developed, and its effectiveness for extracting and predicting three CQAs, namely defect states, compression force levels, and amounts of disintegrant, is demonstrated. Using a robotic tablet handling experimental rig, each attribute's distinct waveform dataset was acquired and utilized for training, validating, and testing the respective ML models. This study details an advanced algorithmic quality assessment framework for pharmaceutical CM in which automated RTR testing is expected to be critical in developing cost-effective in-process real-time monitoring systems. The presented ML-NDE approach has demonstrated its effectiveness through evaluations with separate (unused) test datasets.

Machine vision-based non-destructive dissolution prediction of meloxicam-containing tablets.

Machine vision systems have emerged for quality assessment of solid dosage forms in the pharmaceutical industry. These can offer a versatile tool for continuous manufacturing while supporting the framework of process analytical technology, quality-by-design, and real-time release testing. The aim of this work is to develop a digital UV/VIS imaging-based system for predicting the in vitro dissolution of meloxicam-containing tablets. The alteration of the dissolution profiles of the samples required different levels of the critical process parameters, including compression force, particle size and content of the API. These process parameters were predicted non-destructively by multivariate analysis of UV/VIS images taken from the tablets. The dissolution profile prediction was also executed using solely the image data and applying artificial neural networks. The prediction error (RMSE) of the dissolution profile points was less than 5%. The alteration of the API content directly affected the maximum concentrations observed at the end of the dissolution tests. This parameter was predicted with a relative error of less than 10% by PLS models that are based on the color components of UV and VIS images. In conclusion, this paper presents a modern, non-destructive PAT solution for real-time testing of the dissolution of tablets.

Bioequivalence and Safety Assessment of 2 Formulations of Low-Dose Metformin Hydrochloride under Fasting Conditions in Healthy Chinese Participants: A Randomized Phase 1 Clinical Trial.

The incidence of type 2 diabetes is high, and the existing metformin hydrochloride (MH) tablets of 250 mg cannot meet the demands of the Chinese drug market. This study aimed to evaluate the bioequivalence and safety of generic formulations of MH tablets (test formulation [T], 250 mg/tablet) and innovative products (reference formulation [R], 250 mg/tablet) under fasting conditions. This was an open-label, single-dose, 2-period, 2-sequence crossover, single-center, randomized phase I clinical trial. T and R were considered bioequivalent if the adjusted geometric mean ratios (GMRs) and 90% confidence intervals of the area under the curve (AUC) and maximum concentration (Cmax ) were within the range of 0.8-1.25. Thirty-five participants completed the trial. The T/R adjusted GMRs (95.7% for Cmax , 98.7% for AUC0→t , 98.8% for AUC0→∞ ) were within the acceptable bioequivalence range of 80%-125%. No serious adverse events or suspected or unexpected serious adverse reactions occurred during this trial. The study findings confirmed that generic MH is a well-tolerated and bioequivalent alternative to innovative products under fasting conditions in healthy Chinese participants. (www.chinadrugtrials.org.cn; registration no. CTR20190356).

Comparison of clinical and economic evaluation between selected generic and original febuxostat tablets in Chinese gout patients with hyperuricemia: A real-world multicenter retrospective study.

Generic febuxostat tablets were listed in China's third-round centralized drug procurement program. However, there are no sufficient data available on the use of febuxostat in a real-world setting. This study aimed to compare the efficacy, safety, and cost of selected generic febuxostat with original febuxostat in primary gout and hyperuricemia. Medical records at 3 tertiary hospitals from January 2014 to February 2022 were retrospectively analyzed. Propensity score matching was used to balance the distribution of baseline characteristics. The proportion of patients achieving target serum uric acid (SUA) levels at 12 weeks, the percent changes from baseline in SUA, adverse drug reactions, and the cost of febuxostat therapy were assessed. A total of 221 patients were recruited and 57 pairs of patients were 1:1 matched in the 2 groups. There was no statistically significant difference in the proportion of patients achieving a target SUA levels below 300 µmol/L, the percent changes of SUA decreased from baseline, and the incidence of adverse drug reactions between the 2 groups (all P > .05). The daily febuxostat cost in the generic group were significantly lower than that in original group (P < .05). Based on the results of this study, the clinical efficacy of selected generic febuxostat is comparable to that of original febuxostat for gout with hyperuricemia. No serious adverse reactions were reported in the 2 groups, and generic febuxostat is more economical than the original febuxostat.

Assessment of Directional-Hemispherical Reflectance of Tablets with Cefuroxime during Storage under Elevated Temperature and Ultraviolet Radiation.

Environmental conditions can lead to changes in the physical and chemical structures of drug products. In this study, the stability of cefuroxime tablets stored under adverse conditions was evaluated based on total directional-hemispherical reflectance (THR). The THR value was measured before and after the tablets' exposure to stress factors (temperature of 45 °C and UV radiation). Each measurement was performed three times within seven spectral bands at the beginning of the experiment (day 0), and then on days 1, 2, 3, 5, and 7. In addition, hyperspectral profiles (400-1030 nm) were analyzed on days 0 and 7. A significant decrease in THR values in all wavelength ranges was observed when day 7 vs. day 0 were compared, especially for spectral bands of 335-380 nm and 1700-2500 nm (Δ = 0.220, p < 0.001 and Δ = 0.171, p < 0.001, respectively). The hyperspectral analysis confirmed a decrease in the reflectance after the end of stress conditions in the visible light range (400-700 nm) compared to tablets before the experiment. This may indicate that more radiation entered the tablets. In conclusion, the THR of cefuroxime tablets decreases during the exposure to heat and UV radiation, which may result from some physicochemical changes that have occurred during storage.

[Development and Assessment of a New Oral Selenium Fast-disintegrating Tablets].

Selenium is an essential trace element and its deficiency causes myositis, myocardial damage, and other symptoms. Patients receiving long-term intravenous nutrition or tube-feeding in particular are deficient in essential trace elements, including selenium, and require regular supplementation. In Japan, injectable selenium-containing products are listed on the National Health Insurance drug price list, and oral solutions are prepared and used in hospitals. However, these formulations have problems related to preservation and require complicated administration procedures. In this study, we developed a new fast-disintegrating tablet formulation of selenium, using SmartEx® (D-mannitol·low substituted hydroxypropylcellulose (L-HPC)·fully hydrolyzed polyvinyl alcohol (PVA) mixture) as a coprocessing additive, that can be administered orally or by feeding tube. The tablet formulation had excellent disintegrable capability, sufficient hardness, and did not cause tube blockage when administered in the simple suspension method. In addition, the tablet formulation showed no changes in properties in an accelerated test without packaging for 42 d, indicating that it could be stored for a long period. Fast-disintegrating tablets prepared with SmartEx® are expected to improve the adherence and quality of life of patients who require selenium supplementation.

A Comparative Assessment of Cocrystal and Amorphous Solid Dispersion Printlets Developed by Hot Melt Extrusion Paired Fused Deposition Modeling for Dissolution Enhancement and Stability of Ibuprofen.

The primary focus of the research is to study the role of cocrystal and amorphous solid dispersion approaches for enhancing solubility and preserving the stability of a poorly soluble drug, i.e., ibuprofen (IBP). First, the solvent-assisted grinding approach determined the optimum molar ratio of the drug and the coformer (nicotinamide (NIC)). Later, the polymeric filaments of cocrystals and amorphous solid dispersions were developed using the hot melt extrusion (HME) process, and the printlets were fabricated using the fused deposition modeling (FDM) additive manufacturing process. In addition, the obtained filaments were also milled and compressed into tablets as reference samples. The formation of cocrystals and amorphous solid dispersions was evaluated and confirmed using differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and powder X-ray diffraction (PXRD) analysis. The drug release profiles of 3D printlets with 50% infill were found to be faster and are in line with the release profiles of compressed tablets. In addition, the 3D-printed cocrystal formulation was stable for 6 months at accelerated conditions. However, the 3D printlets of amorphous solid dispersions and compressed tablets failed to retain stability attributed to the recrystallization of the drug and loss in tablet mechanical properties. This shows the suitability of a cocrystal platform as a novel approach for developing stable formulations of poorly soluble drug substances over amorphous solid dispersions.

Assessment of the Water Sorption Capacity of Rifaximin Using the Dynamic Vapor Sorption Technique for Optimization of the Choice of Excipients and the Manufacturing Environment of Rifaximin Tablets.

BACKGROUND: Rifaximin, a medication of the rifamycin family with two distinct strengths of 200 mg and 550 mg in tablet form, is useful for the treatment of travelers' diarrhea. It has a solid yellow hue and is very hygroscopic in nature. It exhibits a variety of polymorphic forms such as α, ß, γ, δ, and ε depending on bonded moisture. These polymorphs' varying chemical and physical characteristics, such as solubility and water content, may have a big impact on in vivo absorption, which in turn affects efficacy and safety. Therefore, understanding the polymorphic stability of rifaximin is crucial for formulating rifaximin tablets. OBJECTIVE: The current effort focuses on the understanding of water vapor sorption properties to control the polymorphic stability of rifaximin in the tablet formulation using the appropriate selection of excipients and manufacturing process. METHODS: The dynamic vapor sorption method in the range of 0-90% relative humidity at 25°C is used for understanding the sorption properties of drug substances and drug excipient mixtures; the state-of-the-art techniques of the X-ray diffraction method are used to identify polymorph conversions; and dissolution procedures are used for in vitro correlation studies. RESULTS: The sorption study data reveals that rifaximin is highly unstable at relative humidity conditions above 36%. When using excipients that have a low tendency to adsorb water in the formulation, the polymorphic results do not show any change in their intended form, and the in vitro dissolution data show an equivalency with the reference drug product. CONCLUSION: The study prompted a successful outcome-oriented development of the formulation processing environment conditions design to develop a test formulation that has adequate polymorphic stability and also similarity in in-vitro dissolution profiles, with the reference product with highest similarity. HIGHLIGHTS: The overall study described here is useful for swiftly gaining insight into the sorption characteristics of rifaximin, and it contributes to the widespread acceptance of rifaximin tablets as a treatment option.

Quality-by-design based development of fast dispersible nimodipine tablets: Formulation attributes and release kinetic assessment.

In the present study fast dispersible nimodipine tablets were developed by direct compression method using quality by design (QbD) approach as per the central composite design by selecting avicel PH 102 (X1) and crospovidone (X2) as independent variables while % friability (R1), disintegration (R2) and hardness (R3) as output variables. Powder blends were assessed for flow characterization. At post compressional stage, several quality assessments were carried out. Particles morphology was observed using scanning electron microscopy (SEM). The stability study on the drug and optimized formulation were determined using thermal gravimetric analysis (TGA) and differential thermal analysis (DTA). RSM plots expressed the interaction of avicel PH 102 and crospovidone to determine the adequate quantities of excipients for the optimized formulation. Polynomial equations were used to validate the experimental design. The optimized formulations were evaluated for friability, disintegration and hardness. Results indicated that formulation (F4) containing avicel PH 102 (35%) and crospovidone (5%) was selected as best optimized formulation having friability 0.59%, disintegration 9 sec, % dissolution 95.703% and hardness 4.14 kg. Results of kinetics models indicated that all the developed formulations followed weibull model.

Manufacturing pharmaceutical mini-tablets for pediatric patients using drop-on-demand printing.

The pharmaceutical industry has traditionally manufactured medicines in a limited range of dose strengths, with an emphasis on addressing the needs of the largest patient subgroups. This has disadvantaged smaller patient subsets, such as children, who often cannot find drug products in dosage levels suitable for their requirements. In recent years, development of pharmaceutical mini-tablets has emerged as an attractive solution to this problem. These are small-size dosages that offer attractive features such as flexible and personalized drug dosing, ease of swallowing, and tailored drug release, making them an excellent choice for administering medicines to children. This study presents a novel technique for manufacturing pharmaceutical mini-tablets, using a drop-on-demand (DoD) printing system. In this method, a DoD system is used to generate precise droplets of a melt-based formulation, which are then captured and solidified in an inert solvent bath to produce individual mini-tablets. The study also evaluates the performance of this technique for various formulations, and quantifies two critical quality attributes (CQAs) of the resulting mini-tablets: content uniformity and dissolution behavior. The findings demonstrate that the manufactured mini-tablets can meet regulatory specifications for both CQAs, and that their release profiles can be customized by modifying the excipients used. The study also discusses promising areas of application and limitations of this technique.

Spectrofluorometric determination of cinacalcet hydrochloride: greenness assessment and application to biological fluids andin-vitrodissolution testing.

A facile, simple, green and sensitive spectrofluorometric method was developed for determination of the calcimimetic drug cinacalcet hydrochloride. It is used for the treatment of hyperparathyroidism. The drug showed high native fluorescence intensity at 320 nm after excitation at 280 nm. The method was linear over the range of 5.0-400.0 ng ml-1with excellent correlation (R2= 0.9999). Limit of detection (LOD) and limit of quantitation (LOQ) values were 1.19 and 3.62 ng ml-1, respectively. The percentage recovery was found to be 100.42% ± 1.39 (n=8). The proposed method was successfully applied for determination of cinacalcet in spiked human plasma samples with % recoveries of (87.23 to 109.69%). Two recent greenness metrics (GAPI and Analytical Eco-Scale) were chosen to prove the eco-friendly nature of the method. Furthermore, the proposed method was successfully applied to dissolution study of commercial cinacalcet tablets. The interference likely to be introduced by some commonly co-administrated drugs such as metoprolol and itraconazole was studied; the tolerance limits were calculated.

Single-tablet-scale direct-compression: An on-demand manufacturing route for personalized tablets.

Today's pharmaceutical industry is facing various challenges. Two of them are issues with supply chain security and the increasing demand for personalized medicine. Both can be addressed by increasing flexibility and a more decentralized approach to pharmaceutical manufacturing. In this study, we present a setup that provides flexibility in terms of supplied raw materials and the product, i.e., a direct-compression setup for personalized tablets operating at a single-tablet-scale. The performance of the implemented single-tablet-scale technology for dosing and mixing was investigated. In addition, an analysis of the critical quality attributes (CQAs) of immediate release ibuprofen and loratadine tablets was performed. The developed dosing device achieved acceptance rates of > 90 % for doses ≥ 20 mg for various pharmaceutical powders. Regarding the vibratory mixing process, a dependency of the performance on the applied frequencies and acceleration was observed, with 100 Hz and âˆ¼ 90 G performing best, yet still exhibiting varying mixing efficacies depending on the granular system. The tablets produced met U.S. Pharmacopeia requirements regarding mechanical stability and dissolution characteristics. Given these results, we consider the developed setup a proof of concept of a tool to provide personalized tablets to patients while minimizing the dependency on complex supply chains.

Cylindrical granules in the development of mesalazine solid formulations (â ): Physical properties, compression behaviors, and tableting performances.

Cylindrical granules have been employed in the pharmaceutical industry. However, to our knowledge, the study on the compressibility and tabletability of cylindrical granules has not been reported. This study aimed to explore the effects of the physical properties of cylindrical granules on the compression behaviors and the tableting performances, with mesalazine (MSZ) as a model drug. First, the six formulations of MSZ cylindrical granules were extruded by changing the ethanol proportion in the binder. Then, the physical characteristics of MSZ cylindrical granules were systematically studied. Subsequently, the compressibility and tabletability were evaluated using different mathematic models. It was worth noting that highly porous cylindrical granules possessed favorable compressibility and good tabletability due to the increased pore volume, reduced density, and decreased fracture forces. Finally, dissolution tests were conducted and highly porous granules showed higher dissolution rates than the less porous ones, but an opposite trend was observed for the corresponding tablets. This study proved the importance of physical properties in the tableting process of cylindrical granules and provided strategies to improve their compressibility and tabletability.

Utilization of Chemometric-Aided UV Spectrophotometric Methods for Concurrent Assessment of Emtricitabine, Tenofovir Disoproxil Fumarate, Elvitegravir, and Cobicistat in Tablet Formulation.

BACKGROUND: Emtricitabine (ETC), tenofovir disoproxil fumarate (TNF), elvitegravir (EVG), and cobicistat (CBS) are antiviral drugs used to treat human immunodeficiency virus (HIV) infections. OBJECTIVE: To develop chemometric-aided UV spectrophotometric methods for concurrent estimation of the aforementioned drugs used to treat HIV. This method can be used to reduce modification of the calibration model by assessing the absorbance at various points in the zero-order spectra within the selected wavelength range. Additionally, it eliminates interfering signals and provides sufficient resolution in multi-component systems. METHODS: Two chemometric-assisted UV spectrophotometric methods, namely, partial least-squares (PLS) and principal component regression (PCR) models, were established for the concurrent assessment of EVG, CBS, TNF, and ETC in tablet formulations. The proposed methods were applied to decrease complexity of overlapped spectra and to achieve maximum sensitivity and the lowest error. These approaches were performed in accordance with International Council on Harmonization (ICH) criteria and compared to the reported HPLC method. RESULTS: The proposed methods were used to assess EVG, CBS, TNF, and ETC in the ranges of 5-30, 5-30 , 5-50, and 5-50 µg/mL, respectively, with an excellent correlation coefficient (r2 ≥ 0.998). The accuracy and precision results were found to be within the acceptable limits. No statistical difference was observed between the proposed and reported studies. CONCLUSION: The chemometric-aided UV spectrophotometric approaches could be considered as alternatives to chromatographic procedures in the pharmaceutical industry for routine analysis and testing of readily accessible commercial formulations. HIGHLIGHTS: Novel chemometric-assisted UV spectrophotometric techniques were developed for assessment of multicomponent antiviral combinations in single-tablet formulations. The proposed methods were performed without using harmful solvents, tedious preparation, or expensive instruments. The proposed methods were compared statistically with a reported HPLC method. Assessment of EVG, CBS, TNF, and ETC was performed without interference from excipients in their multicomponent formulations.