Amended Safety Assessment of Methylisothiazolinone as Used in Cosmetics.

The Expert Panel for Cosmetic Ingredient Safety (Panel) reassessed the safety of Methylisothiazolinone, which functions as a preservative in cosmetics. The Panel reviewed relevant animal and human data provided in this safety assessment, and data from the previously published safety assessments of Methylisothiazolinone, and concluded that Methylisothiazolinone is safe for use in rinse-off cosmetic products at concentrations up to 100 ppm (ie, 0.01%) and safe in leave-on cosmetic products when they are formulated to be nonsensitizing, which may be determined based on a quantitative risk assessment or similar methodology.

Comparison of ocular surface assessment and adherence between preserved and preservative-free latanoprost in glaucoma: a parallel-grouped randomized trial.

Given that nonadherence is related to subject characteristics and drug tolerance and preserved eye drops tend to be more intolerable than preservative-free ones, we conducted a phase 4, parallel-grouped, investigator-blind, active-control, randomized, multicenter study. A total of 51 patients with intraocular pressure (IOP) ≥ 15 mmHg diagnosed with open-angle glaucoma or ocular hypertension were randomly assigned to the preserved latanoprost group (n = 26) and the preservative-free latanoprost group (n = 25). The efficacy variables were corneal/conjunctival staining grade, Ocular Surface Disease Index (OSDI), adherence at 12 weeks after the first administration; corneal/conjunctival staining grade at 4 weeks; and IOP, tear break-up time (TBUT), and hyperemia score at 4 and 12 weeks. The safety variables included visual acuity and drug tolerance questionnaire results. There was no statistically significant difference in corneal/conjunctival staining grade, OSDI, or TBUT between the groups at 4 and 12 weeks. However, the adherence rate was higher and the hyperemia score was lower in the preservative-free group than in the preserved group. The severity and duration of stinging/burning sensation were lower in the preservative-free group than in the preserved group. Overall, preservative-free latanoprost showed better ocular tolerance assessed by hyperemia scores and stinging/burning symptoms following higher adherence than preserved latanoprost.

Integrated approaches to testing and assessment as a tool for the hazard assessment and risk characterization of cosmetic preservatives.

The safety assessment of cosmetic products is based on the safety of the ingredients, which requires information on chemical structures, toxicological profiles, and exposure data. Approximately 6% of the population is sensitized to cosmetic ingredients, especially preservatives and fragrances. In this context, the aim of this study was to perform a hazard assessment and risk characterization of benzalkonium chloride (BAC), benzyl alcohol (BA), caprylyl glycol (CG), ethylhexylglycerin (EG), chlorphenesin (CP), dehydroacetic acid (DHA), sodium dehydroacetate (SDH), iodopropynyl butylcarbamate (IPBC), methylchloroisothiazolinone and methylisothiazolinone (MCI/MIT), methylisothiazolinone (MIT), phenoxyethanol (PE), potassium sorbate (PS), and sodium benzoate (SB). Considering the integrated approaches to testing and assessment (IATA) and weight of evidence (WoE) as a decision tree, based on published safety reports. The hazard assessment was composed of a toxicological matrix correlating the toxicity level, defined as low (L), moderate (M), or high (H) and local or systemic exposure, considering the endpoints of skin sensitization, skin irritation, eye irritation, phototoxicity, acute oral toxicity, carcinogenicity, mutagenicity/genotoxicity, and endocrine activity. In a risk assessment approach, most preservatives had a margin of safety (MoS) above 100, except for DHA, SDH, and EG, considering the worst-case scenario (100% dermal absorption). However, isolated data do not set up a safety assessment. It is necessary to carry out a rational risk characterization considering hazard and exposure assessment to estimate the level of risk of an adverse health outcome, based on the concentration in a product, frequency of use, type of product, route of exposure, body surface location, and target population.

Assessment of Protein Profiles of RNAlater Stored and Fresh PBMC Cells Using Different Protein Extraction Buffers.

For proteome analyses, the tissue samples are mostly preserved either snap frozen or formalin-fixed, paraffin-embedded form. Use of RNAlater-a non-toxic solution primarily used to stabilize the RNA content of samples-in tissue preservation for proteome analysis recently described equally reliable with snap-frozen preservation in human tissues. Even though RNALater storage has great potential in the preservation of Peripheral Blood Mononuclear Cells (PBMC), its impact on the results of proteome analysis is poorly described at qualitative and quantitative measures. The present study investigated protein profiles of RNAlater preserved and fresh PBMCs using three extraction buffers viz. Triton X-100, RIPA and SDS. Proteins are separated in SDS-PAGE and quantified using densitometry. On an average 19.3 bands from fresh and 15.6 bands from RNAlater storage cells were obtained with a molecular weight ranging from 25 to > 250 kDa. RNAlater storage generated a fewer number and lesser quantity of low molecular weight proteins while yielded a similar or high quantity of high molecular weight protein fractions. The principal component analysis showed that Triton X-100 is inferior as compared to SDS and RIPA with respect to their protein bands and quantity yielded. While RNAlater is effective in preserving PBMC for proteome analysis, our findings warrant caution in its use in proteomics experiments especially if the target is low molecular weight proteins.

Assessment of Phosphate and Osmolarity Levels in Chronically Administered Eye Drops

Objectives: To assess phosphate and osmolarity levels of chronically administered eye drops commercially available in Turkey. Materials and Methods: A total of 53 topical eye drops including 18 antiglaucoma drugs, 4 nonsteroidal anti-inflammatory drugs (NSAIDs), 10 corticosteroids, 7 antihistaminics, and 14 artificial tears identified using the Vademecum Modern Medications Guideline (2018) were included in the study. Phosphate levels were assessed using Roche Cobas C501 analyzer (Roche Diagnostics GmbH, Mannheim, Germany) and the respective kits. Osmolarity was assessed using Vescor Vapro 5600 vapor pressure osmometer (Sanova Medical Systems, Vienna, Austria). Mean phosphate and osmolarity levels were obtained after averaging three measurements. Eye drops were categorized as isoosmolar, hypoosmolar and hyperosmolar based on physiologic tear osmolarity range (296.5±9.8 mOsm/L). Results: The highest phosphate concentration was found in the antiglaucoma group (20.3±35.4 mmol/L), followed by antihistaminics (17.3±17.9 mmol/L), corticosteroids (15.2±19.1 mmol/L), artificial tears (0.8±1.0), and NSAIDs (0.04±0.08). Percentage of medications in the hyperosmolar category was highest in the NSAI group (75%), followed by antihistaminics (43%), corticosteroids (20%), and antiglaucoma drugs (19%). Nearly all of the artificial tear formulations were in the hypoosmolar (71%) or isoosmolar (21%) categories. Conclusion: Approximately 40% of glaucoma medications and approximately 60% of corticosteroid and antihistaminic medications had a phosphate concentration higher than the physiologic tear phosphate level (1.45 mmol/L).

Performance Verification of Alternative Quality Control Materials for Urine Albumin Assessment.

BACKGROUND: Accurate detection of urine albumin is important for evaluating the progression of diabetic kidney disease. However, two levels of daily quality control may not be practically feasible in some small clinical laboratories owing to a small number of patient samples and high costs. We aimed to prepare homemade quality control material (HQM) to measure urine albumin and then verify its performance. METHODS: Normal saline solution and fresh mixed urine samples from five donors with serious kidney disease were used to prepare two levels of HQM (HQM1 and HQM2). Anhydrous ethylene glycol and sodium azide were used as antifreeze and as a preservative, respectively. RESULTS: Before being separated into Eppendorf tubes, 20 tests for HQM1 and HQM2 were performed, resulting in mean ± SD of 19.52 ± 0.91 mg/L and 105.28 ± 3.71 mg/L, respectively. After having been divided, the vial-to-vial variations of HQM1 and HQM2 were small (4.93% and 3.70%, respectively). The stability of HQM1 and HQM2 stored at 2 - 8°C was about 2 months and 80 days, respectively, and when stored at -20°C, remained stable for more than 8 months. After 1 - 8 months of cryopreservation at -20°C, once opened, the HQM in every Eppendorf tube could be kept for at least five days (CV < 6.1%). CONCLUSIONS: Our HQM stored at -20°C remained stable for a long time, and so could be considered as an alternative to standard QMs in the clinical laboratory.

Thinned stone fruits are a source of polyphenols and antioxidant compounds.

BACKGROUND: Thinned fruits are agricultural by-products that contain large quantities of interesting compounds due to their early maturity stage. In this work, the phenolic profile and the antioxidant activity of six thinned stone fruits (apricot, cherry, flat peach, peach, plum and nectarine) have been investigated, focussing on proanthocyanidins. RESULTS: Thinned nectarine had the highest content of total phenols [67.43 mg gallic acid equivalents (GAE) g-1 dry weight (DW)] and total flavonoids (56.97 mg CE g-1 DW) as well as the highest antioxidant activity measured by DPPH scavenging (133.30 mg [Trolox equivalents (TE) g-1 DW] and FRAP assay (30.42 mg TE g-1 DW). Proanthocyanidins were very abundant in these by-products, and the main phenolic group quantified in cherry (10.54 mg g-1 DW), flat peach (33.47 mg g-1 DW) and nectarine (59.89 mg g-1 DW), while hydroxycinnamic acids predominate in apricot, peach and plum (6.67, 22.04 and 23.75 mg g-1 DW, respectively). The low, mean degree of polymerisation of proanthocyanidins suggests that their bioavailability could be very high. CONCLUSIONS: This study shows that thinned stone fruit extracts might be used as antioxidants in foods or as a source of compounds with health-related benefits that can be used in the pharmaceutical, cosmetic and food industries. © 2016 Society of Chemical Industry.

Advanced oxidation kinetics and mechanism of preservative propylparaben degradation in aqueous suspension of TiO2 and risk assessment of its degradation products.

The absolute kinetic rate constants of propylparaben (PPB) in water with different free radicals were investigated, and it was found that both hydroxyl radicals (HO(•)) and hydrated electrons could rapidly react with PPB. The advanced oxidation kinetics and mechanisms of PPB were investigated using photocatalytic process as a model technology, and the degradation was found to be a pseudo-first-order model. Oxidative species, particularly HO(•), were the most important reactive oxygen species mediating photocatalytic degradation of PPB, and PPB degradation was found to be significantly affected by pH because it was controlled by the radical reaction mechanism and was postulated to occur primarily via HO(•)-addition or H-abstraction reactions on the basis of pulse radiolysis measurements and observed reaction products. To investigate potential risk of PPB to humans and aqueous organisms, the estrogenic assays and bioassays were performed using 100 µM PPB solution degraded by photocatalysis at specific intervals. The estrogenic activity decreased as PPB was degraded, while the acute toxicity at three trophic levels first increased slowly and then decreased rapidly as the total organic carbon decreased during photocatalytic degradation.

First derivative spectrophotometric determination of granisetron hydrochloride in presence of its hydrolytic products and preservative and application to pharmaceutical preparations.

Granisetron is a selective 5-HT3 receptor antagonist used in prevention and treatment of chemotherapy-induced nausea and vomiting. The drug is available in tablet dosage form and parenteral dosage form containing benzyl alcohol as a preservative. The main route of degradation of granisetron is through hydrolysis. The present work describes the development of a simple, rapid, and reliable first derivative spectrophotometric method for the determination of granisetron in presence of its hydrolytic products as well as the formulations adjuvant and benzyl alcohol. The method is based on the measurement of the first derivative response of granisetron at 290 nm where the interference of the hydrolytic products, the co-formulated adjuvant and benzyl alcohol is completely eliminated. The proposed method was validated with respect to specificity, linearity, selectivity, accuracy, precision, robustness, detection, and quantification limits. Regression analysis showed good correlation between the first derivative response and the concentration of granisetron over a range of 8-16 µg ml(-1) . Statistical analysis proved the accuracy of the proposed method compared with a reference stability indicating high performance liquid chromatography method. The described method was successfully applied to the determination of granisetron in different batches of tablets and ampoules. The assay results obtained in this study strongly encourage us to apply the validated method for the quality control and routine analysis of tablets and parenteral preparations containing granisetron.

Assessment of a four hour delay for urine samples stored without preservatives at room temperature for urinalysis.

OBJECTIVES: To determine whether urine storage at room temperature for up to 2h versus 4h changes urinalysis results. DESIGN AND METHODS: We compared the rejection rate at eight different hospital laboratories and concordance of urinalysis results (n=83; two laboratories) between urines analyzed within 2h and 4h after collection. RESULTS: The rejection rate at the two hour cutoff was significantly higher as compared to the four hour cutoff. The concordance between urinalysis results was 97-100% between the two and four hour analyses. CONCLUSION: Urine may be stored for up to 4h at room temperature without significant changes to the urinalysis results.

Allergy to methyldibromoglutaronitrile/phenoxyethanol (Euxyl k 400): regulatory issues, epidemiology, clinical characteristics, and management.

Methyldibromoglutaronitrile/phenoxyethanol (Euxyl K 400) is a preservative found in both personal care products and industrial sources. Although Euxyl K 400 initially appeared to have low sensitizing potential, increased prevalence of contact allergy to Euxyl K 400 led to regulatory intervention. This review summarizes the history, epidemiology, and management of contact allergy to Euxyl K 400. Issues related to patch-test preparations are also discussed.

Impact of tubing material on the failure of product-specific bubble points of sterilizing-grade filters.

The following study was conducted to determine the effect of different preservatives commonly used in the biopharmaceutical industry on the product-specific bubble point of sterilizing-grade filters when used to filter product processed with different types of tubing. The preservatives tested were 0.25% phenol, m-cresol, and benzyl alcohol. The tubing tested was Sani-Pure (platinum-cured silicone tubing), Versilic (peroxide-cured silicone tubing), C-Flex, Pharmed, and Cole-Parmer (BioPharm silicone tubing). The product-specific bubble point values of sterilizing grade filters were measured after the recirculation of product through the filter and tubing of different types of materials for a total contact time of 15 h. When silicone tubing was used, the post-recirculation product-specific bubble point was suppressed on average 13 psig when compared to the pre- recirculation product-specific bubble point. Suppression was also observed with C-Flex, but to a much lesser extent than with silicone tubing. Suppression was not observed with Pharmed or BioPharm tubing. Alcohol extractions performed on the filters that experienced suppressed bubble points followed by Fourier transform infrared spectroscopy analysis indicated the filters contained poly(dimethylsiloxane). Direct addition of poly(dimethlysiloxane) to solutions filtered through sterilizing-grade filters suppressed the filter bubble points when tested for integrity. Silicone oils most likely reduced the surface tension of the pores in the membrane, resulting in the ability of air (or nitrogen) to pass more freely through the membrane, causing suppressed bubble point test values. The results of these studies indicate that product-specific bubble point of a filter determined with only product may not reflect the true bubble point for preservative-containing products that are recirculated or contacted with certain tubing for 15 h or greater. In addition, tubing material placed in contact with products containing preservatives should be evaluated for impact to the product-specific bubble point when being utilized with sterilizing-grade filters.