Assessment of Peri-Implant Soft Tissues Conditions around Short and Ultra-Short Implant-Supported Single Crowns: A 3-Year Retrospective Study on Periodontally Healthy Patients and Patients with a History of Periodontal Disease.

The aim of this retrospective study was to evaluate implant survival, marginal bone loss and peri-implant complications in 326 short and ultra-short implants. Implants were placed in the maxillary and mandibular posterior regions of 140 patients with (PP) and without (NPP) a history of periodontal disease. Clinical and radiographic examinations were performed at 3-year recall appointments. The 8.0, 6.0 and 5.0 mm-length implants placed in PP and NPP were respectively 43.75% and 38.46%, 35.10% and 34.19%, 21.15% and 27.35%; 325 implants (one early failure) were rehabilitated with single crowns in 139 patients. Overall implant survival after 3 years of follow-up was 97.55%, 98.08% and 96.61% for PP and NPP (p = 0.46). Crestal bone level variations were not statistically different among PP and NPP; 15.41% of implants presented signs of mucositis, 14.71% and 16.67% in PP and NPP (p = 0.64). Setting the threshold for bone loss at 2 mm after 36 months, peri-implantitis prevalence was 2.2%, 1.96% and 2.63% in PP and NPP (p = 0.7). Overall implant success was 82.39%, 83.33% and 80.7% for PP and NPP (p = 0.55). Short-term outcomes suggest that short and ultra-short locking-taper implants can successfully be restored with single crowns in the posterior jaws both in PP and NPP.

The quality of fixed prosthodontic impressions: An assessment of crown and bridge impressions received at commercial laboratories.

BACKGROUND: The authors evaluated and quantified clinically detectable errors commonly seen in impressions sent to commercial laboratories and determined possible relationships between finish line errors and other factors involved. METHODS: The authors visited 3 large and 1 small commercial dental laboratories over a 12-month period. Three calibrated examiners evaluated the impressions. The examiners evaluated all impressions for errors by using ×2.5 magnification loupes under ambient room lighting without the aid of additional illumination. RESULTS: The authors evaluated 1,157 impressions; 86% of the examined impressions had at least 1 detectable error, and 55% of the noted errors were critical errors pertaining to the finish line. The largest single error categories evaluated were tissue over the finish line (49.09%), lack of unprepared stops in dual-arch impressions (25.63%), pressure of the tray on the soft tissue (25.06%), and void at the finish line (24.38%). The factors blood on the impression (odds ratio, 2.31; P < .001) and tray type (odds ratio, 1.68; P < .001) were associated significantly with finish line errors. CONCLUSIONS: Marginal discrepancies made up the largest category of error noted in impressions evaluated. The authors noted an increase in errors at the finish line with dual-arch impression techniques and in the presence of blood. PRACTICAL IMPLICATIONS: Dentists have ethical, moral, and legal obligations bestowed on them by the profession and need to evaluate critically the work they send to laboratories. The authors strongly recommend an improvement in technique and reviewing of all impressions and working casts.

Effectiveness of Crown Preparation Assessment Software As an Educational Tool in Simulation Clinic: A Pilot Study.

The aim of this pilot study was to evaluate the feasibility of a new tooth preparation assessment software, Preppr, as an educational tool for dental students in achieving optimal parameters for a crown preparation. In February 2015, 30 dental students in their fourth year in a five-year undergraduate dental curriculum in New Zealand were randomly selected from a pool of volunteers (N=40) out of the total class of 85. The participants were placed into one of three groups of ten students each: Group A, the control group, received only written and pictorial instructions; Group B received tutor evaluation and feedback; and Group C performed self-directed learning with the aid of Preppr. Each student was asked to prepare an all-ceramic crown on the lower first molar typodont within three hours and to repeat the exercise three times over the next four weeks. The exercise stipulated a 1 mm finish line dimension and total convergence angles (TOC) between 10 and 20 degrees. Fulfillment of these parameters was taken as an acceptable preparation. The results showed that Group C had the highest percentage of students who achieved minimum finish line dimensions and acceptable TOC angles. Those students also achieved the stipulated requirements earlier than the other groups. This study's findings provide promising data on the feasibility of using Preppr as a self-directed educational tool for students training to prepare dental crowns.

Subjective qualitative assessment of the finish line of prosthetic preparations submitted to different finishing instruments.

STATEMENT OF PROBLEM: Different instruments have been developed to improve crown finish lines after conventional preparation with diamond rotary instruments. However, more evidence on the effectiveness of these instruments is required. PURPOSE OF STUDY: The purpose of this in vitro study was to assess the effectiveness of 4 different instruments used for cervical margin finishing in regard to the external line angle (ELA). MATERIAL AND METHODS: Forty-eight freshly extracted third molar teeth with similar dimensions were conventionally prepared for crowns and randomly allocated into 4 groups (n=12) according to the finishing instrument: hand trimmer (HT), tungsten carbide bur (TCB), ultrasonic instrument (UI), and diamond rotary instrument (DRI) mounted in a contra angle handpiece with reduced speed. Photomicrographs from the margin profiles of each tooth were obtained with scanning electron microscopy (×40) before and after finishing procedures. The images were qualitatively analyzed (scores 1-4) by 9 experienced dental professionals. Average results were assessed with the paired t test and repeated measures ANOVA followed by Tukey HSD test (α=.05). RESULTS: HT, TCB, and UI demonstrated no significant differences between unfinished and finished mean ELA scores. DRI was the only group to demonstrate a significantly improved ELA (P<.001). Except for HT in relation to TCB (P=.989), all the other groups demonstrated statistically significant different ELA scores. CONCLUSION: DRI mounted in a contra angle handpiece was the only finishing instrument capable of significantly improving the ELA, while TCB and UI produced nonsignificant improvement, and HT was detrimental to the ELA.

Preparedness of Entering Pediatric Dentistry Residents: Advanced Pediatric Program Directors' and First-Year Residents' Perspectives.

For children to receive needed oral health care, adequate training at both the predoctoral and postdoctoral levels of dental education is required, but previous studies have found inadequacies in predoctoral education that lead to general dentists' unwillingness to treat certain young populations. As another way of assessing predoctoral preparation, the aim of this study was to determine the perspectives of first-year residents and pediatric program directors about residents' preparedness to enter advanced education programs in pediatric dentistry. Surveys were sent to all 74 U.S. program directors and 360 first-year residents. The survey focused on procedures related to prevention, behavior management, restorative procedures, pulp therapy, sedation, and surgery, as well as treating patients funded by Medicaid and with special health care needs. Among the first-year residents, 173 surveys were returned for a 48% response rate; 61 directors returned surveys for an 82% response rate. Only half of the residents (55%) reported feeling adequately prepared for their first year in residency; less than half cited adequate preparation to place stainless steel crowns (SSCs) (42%) and perform pulpotomies (45%). Far fewer felt adequately prepared to provide treatment for children six months to three years of age, including examinations (29%), infant oral exams (27%), and children with severe caries (37%). The program directors were even less positive about the adequacy of residents' preparation. Only 17% deemed them adequately prepared to place SSCs and 13% to perform pulpotomies. Approximately half reported their first-year residents were inadequately prepared to treat very young children and children with severe caries (55% each). This study found that the perceived inadequacy of predoctoral education in pediatric dentistry was consistent at both the learner and educator levels, supporting previous studies identifying inadequacies in this area.

Effect of Employing Different Typodonts When Using E4D Compare for Dental Student Assessment.

The use of computers to aid in instruction and help decrease the subjective component of assessment is steadily increasing. One of the potential barriers to the effective utilization of CAD/CAM technology for assessment purposes is the efficient scanning of the teeth being used for comparison. The purpose of this pilot study was to determine if the use of different typodonts, of the same make and model, has any significant effect on the percent comparison results when using E4D Compare. Tooth #30 was prepared by a faculty member to represent what dental students at Georgia Regents University are taught as the ideal preparation for a full gold crown. Ten typodonts of the same make and model were selected for comparison. Three different examples of students' preparations were scanned and compared to the ideal preparation. Each of the three student preparations was subjected to ten trials (occasions), one for each typodont, at five tolerance levels: 0.1 mm, 0.2 mm, 0.3 mm, 0.4 mm, and 0.5 mm. The intraclass correlation coefficient (ICC) was used to measure the intrarater agreement among the typodonts at the various tolerance levels. The agreement coefficients (0.971-0.984) indicated very little variability attributable to the use of a different typodont. The high agreement coefficients achieved using different typodonts of the same make and model provide evidence for the interchangeability of typodonts when assessing a student's performance in the preclinical simulation environment.

Introducing CAD/CAM into a predoctoral dental curriculum: a case study.

This article describes the decision making and implementation process used at Indiana University School of Dentistry to incorporate a CAD/CAM system into the predoctoral curriculum and presents data regarding the opinions of students and faculty members after one year. Using a non-validated survey instrument, D1 students rated their experience fabricating a CAD/CAM-generated crown. Eighty-eight of the 105 D1 students (84 percent response rate) responded to the four multiple-choice questions, and a varying number provided written responses. Eighty percent of the responding students rated the overall learning experience as good or excellent, and 43 percent judged that they were prepared to fabricate a crown independently. Students' comments about the experience were generally positive. The twelve supervising faculty members were also surveyed after the first year. When asked to evaluate the initial quality of the crowns at placement, they rated 89 to 98 percent of them good or excellent on the measures of marginal fit, axial contours, proximal contacts, and occlusal contacts. In their judgment, CAD/CAM-generated crowns were as good as or better than those received from commercial labs. After one year, the school's experience has been that the performance of these crowns is consistent with the literature and that they are a viable option. Also, the students are enthusiastic about this addition to the curriculum.

The quality of impressions for crowns and bridges: an assessment of the work received at three commercial dental laboratories. assessing qualities of impressions that may lead to occlusal discrepancies with indirect restorations.

There are few published studies that directly assess the quality of impressions for crowns and bridges in the UK. This paper considers aspects of impression quality with particular attention to factors causing potential occlusal discrepancies in the final restoration. To this end three dental laboratories were visited over a 3-month period. All impressions for conventional crown and bridgework that arrived on the days of the visits were examined and assessed against criteria defined on a custom-designed assessment form. A total of 206 impression cases were considered in this study. Flexible impression trays were used for 65% of working impressions. Their use was more common for NHS work than for private work. 31.9% of all alginate impressions examined were not adequately fixed to the tray. Visible contamination of impressions was not uncommon.

Reliability of CAD CAM technology in assessing crown preparations in a preclinical dental school environment.

In order to use CAD CAM (Computer Aided Design, Computer Aided Manufacturing) technology as an assessment tool when evaluating the preclinical performance of dental students, it is imperative that one has confidence in the reliability of the process. In this study, a variety of alignment methods were compared to determine both the consistency and accuracy of each method. Although the "Tooth Dots Diagonal" method exhibited the best precision (coefficient of variation=5.4 percent), it also represented the least accurate method when compared to the other methods tested. Using "Small Dots Diagonal" on the gingiva appears to be the best option, exhibiting an acceptable coefficient of variation (17.6 percent) and a high degree of accuracy in terms of tolerance (mean ± standard deviation=0.163 ± 0.029). Based on the results of this study, further investigation of CAD CAM technology for the purpose of assessment and education of dental students is recommended.

The quality of impressions for crowns and bridges: an assessment of the work received at three commercial dental laboratories. assessing the quality of the impressions of prepared teeth.

The literature is limited in studies directly assessing the quality of impressions for crowns and bridges in the UK. The aim of the study was to assess the quality of impressions for conventional crown and bridgework received by commercial dental laboratories. Three dental laboratories were visited over a 3-month period. All impressions for conventional crowns and bridges that arrived on the days of the visits were examined prior to any laboratory processing. A total of 206 impression cases were examined and assessed against criteria laid out in a custom-designed assessment form. Defects were commonly found in the recording of prepared teeth. Overall, 44.2% of impression cases were unsatisfactory. NHS impressions were more than twice as likely to be unsatisfactory compared to private impressions. If the results of this survey are typical then the general quality of impressions for fixed crown and bridgework is unacceptable. This is particularly true for work completed under the NHS contract.

Circumferential fit assessment of CAD/CAM single crowns--a pilot investigation on a new virtual analytical protocol.

OBJECTIVE: Techniques currently applied to determine the marginal accuracy of dental crown restorations yield inadequate information. This investigation aimed to test a new virtual approach for determining the precision of fit of single-crown copings. METHOD AND MATERIALS: Zirconia single crown copings were manufactured on 10 gypsum, single-tooth master casts with two different established computer-aided design/computer-assisted manufacture (CAD/CAM) systems (groups A and B). After cementation, the circumferential fit was assessed with an industrial noncontact scanner and virtual 3D analysis, following a triple-scan protocol. Marginal fit was determined by virtual sectioning; each abutment-coping complex was digitally sliced in 360 vertical sections (1 degree per section). Standardized measurement distances for analyzing the marginal fit (z, xy, xyz) were selected, and a crosshair alignment was utilized to determine whether crowns were horizontally and/or vertically too large or small. The Mann-Whitney test was applied to test for differences between groups. RESULTS: Significant differences in the xy direction (P = .008) were measured between groups. Group A showed a greater number of horizontally overextended margins and a higher frequency of xy distances greater than 150 Μm, in addition to a tendency for excessive z distances (P = .095). CONCLUSION: The mean marginal gap values were clinically acceptable in the present investigation; however, a full circumferential analysis revealed significant differences in marginal coping quality.

Clinical evaluation of fixed partial dentures made in Sweden and China.

The aim of this study was to compare the quality of fixed partial dentures (FPDs) made in a Chinese dental laboratory with corresponding FPDs made in Swedish dental laboratories. Twenty-one patients were fitted with FPDs between March 2007 and December 2008. Single crowns and prostheses of up to seven units were made. All dentures, gold and CoCr alloys covered with ceramic, were produced in duplicate: one by a dental technician in China and the other by a dental technician in Sweden. The dentures were blind-tested with regard to marginal integrity, anatomic form and color, approximal and occlusal contacts, and time taken for adjustments. The composition of dentures was analyzed, and the material used, framework weight, compliance of the laboratories, and costs (material and labour) were recorded. There was no difference in the quality of marginal integrity, anatomic form, color, approximal and occlusal contacts, or in the time taken for adjustments. The bridge frameworks made in China were thinner and lighter (p<0.01) than those made in Sweden. Three FPDs from China showed elastic deformation when tested clinically and were considered too thin for clinical use. In 11 out of 14 orders from the Chinese laboratory, the gold alloy specified was not delivered and the cobalt-chromium alloy contained small amounts (0.19%) of nickel.The prostheses with gold-alloy frameworks from China cost 47% of those from Sweden (p<0.01) and those with cobalt/chromium frameworks 44% (p<0.01). In conclusion, the quality of the FPDs made in Sweden and China was comparable, with the exception of the dimension of the Chinese bridges, which in some cases was considered too weak. The gold alloy ordered from the Chinese laboratory was often not the alloy delivered and the CoCr alloy contained small amounts of nickel. FPDs from China cost less than half the price of those from Sweden.

Ten-year outcome of crowns placed within the General Dental Services in England and Wales.

AIM: It is the aim of this paper to consider the factors associated with the need for re-intervention on a crown, and the times to re-intervention. METHODS: A data set was established consisting of patients, 18 years or older, whose birthdays were included within a set of a randomly selected dates, one of which was chosen in each possible year of birth and whose restoration records contained the placement of one or more indirect restorations on courses of treatment with last date on the claim form after 31st December 1990, and with date of acceptance after September 1990 and before January 2002. For each tooth treated with a crown, the subsequent history of intervention on that tooth was consulted, and the next date of intervention, if any could be found in the extended data set, was obtained. Thus, a data set was created of crowns which have been placed, with their dates of placement and their dates, if any, of re-intervention. RESULTS: Data for over 80,000 different adult patients were analysed, of whom 46% were male and 54% female. A total of 47,474 crown restoration occasions were obtained from the data over a period of 11 years. Metal crowns were found to have the longest survival-68% at 10 years, and all-porcelain crowns the shortest-48% at 10 years. Factors which were found to influence outcome of crowns included type of crown, age of patient, patient payment exemption status, patient attendance pattern and placement of a root filling in the same course of treatment as a crown. CONCLUSIONS: Full-coverage all-metal crowns have longer survival times before re-intervention than metal-ceramic crowns and all-ceramic crowns. Root fillings are associated with reduced survival time of the crowns examined in this study.

Assessment of sensitivity and specificity of clinical evaluation of cast restoration marginal accuracy compared to stereomicroscopy.

STATEMENT OF PROBLEM: One of the most important criteria for the clinical acceptability and longevity of cast restorations is marginal adaptation. However, there is limited information on the accuracy of commonly practiced evaluation techniques. PURPOSE: This study assessed the effect of preparation design on marginal adaptation. In addition, sensitivity and specificity of clinical evaluations of marginal adaptations of cast restorations were assessed and compared to stereomicroscopy. MATERIAL AND METHODS: Three Ivorine molar teeth of differing designs were prepared: (1) a complete crown preparation with a chamfer finish line, (2) a complete crown preparation with a buccal shoulder and beveled finish line, and (3) a three-quarter crown preparation with proximal boxes and beveled finish line. Twenty-four castings (n = 8) were prepared (Ney technique casting metal). Twelve circumferential sites were identified for examination on each casting using a stereomicroscope, which was interpreted using software (Bioquant 98). The clinical examinations included explorer examination to detect marginal gap by tactile feel, followed by examination with a disclosing media (GC FitChecker). Chi-square tests of independence were used to evaluate the effect of preparation design and compare agreement between examination methods for detection of marginal gap size of greater than or equal to 30 microm (alpha=.05). RESULTS: The overall marginal adaptation of preparation designs was not significantly different. Results of explorer examination at 30-microm sensitivity and specificity were 46% and 97%, respectively. Similar values for disclosing media at 30 microm were 12% sensitivity and 97% specificity. The overall percent agreement with the stereomicroscope using the explorer was 58.3%, with 23.6% correct acceptance rate and 34.7% correct rejection rate. With respect to detection of marginal fit, the combination of disclosing material with explorer data did not yield significantly improved results (59.4%), as compared to explorer alone. A receiver operator characteristic curve yielded satisfactory sensitivity (0.8) and specificity (0.9) at a gap size value of 124 microm. CONCLUSION: Within the limitations of this study, the preparation design did not significantly affect the marginal adaptation. Clinical detection, with similar sensitivity and specificity as the stereomicroscope, occurred at marginal openings greater than or equal to 124 microm. Therefore, commonly used clinical evaluation techniques using an explorer and disclosing media may be inadequate for assessments of marginal accuracy.

Changing patterns and the need for quality.

This series of articles is aimed at anybody who places crowns and other extra-coronal restorations (ie veneers and shims) on individual teeth. We hope that everyone from experienced practitioners to undergraduate students may find something of value. Whoever reads them, we would ask to do so with an open mind. We have tried not to be dogmatic, and the techniques and materials described are not the only ones available, but are the ones which accord with the principles we describe.

Quality of fixed prosthodontics after 15 years.

Interviews and/or clinical examinations by means of the California Dental Association quality evaluation system were carried out in a group of persons who had received extensive restorative treatments with fixed partial dentures 15 years before this study. The studied group consisted of 77 persons who agreed to participate from an original group of 150 persons selected at random from the Swedish Dental Insurance System records. Of the original group 20 had died, 17 were not traceable or not able to participate for medical reasons, and 36 declined to participate. Thirty-two per cent of the recorded reconstructions had been lost, and 8% partially lost during the 15-year period. Thirty-five per cent of the reconstructions were rated as Satisfactory, whereas the remaining ones had mixed clinical quality ratings. Failures and Not Acceptable quality ratings were found to be caused mainly by fractures, loss of retention, and/or dental caries.

Veterans Administration Cooperative Studies Project No. 147. Part II: A new assessment system for rating metal-ceramic crowns.

The rating system developed for this study combined ordinal and numerical scoring. The method involved the following: defining the critical criteria, defining the ordinal rating criteria for the assignment, assigning numerical scores for each individual criterion and totalling the scores for each restoration, adding an adjustment number, and scaling the results to the 0-to-10 range and rounding off to the nearest tenth. When tested on sample data gathered at the 12-month followup appointment, the new system elicited a finer discrimination of differences in the quality of the restorations. Although the system fully meets the needs of the specific project, it should not be considered an answer to the needs of all clinical investigations. It should be viewed as a different approach in the development of an acceptable clinical rating system.