RIFM fragrance ingredient safety assessment, p-tolyl acetate, CAS Registry Number 140-39-6.

The existing information supports the use of this material as described in this safety assessment. p-Tolyl acetate was evaluated for genotoxicity, repeated dose toxicity, reproductive toxicity, local respiratory toxicity, phototoxicity/photoallergenicity, skin sensitization, and environmental safety. Data from read-across analog ethyl p-tolyl carbonate (CAS # 22719-81-9) show that p-tolyl acetate is not expected to be genotoxic. Data on read-across materials p-cresol (CAS # 106-44-5) and acetic acid (CAS # 64-19-7) provide a calculated MOE >100 for the repeated dose and reproductive toxicity endpoints. The skin sensitization endpoint was completed using DST for reactive materials (64 µg/cm2); exposure is below the DST. The phototoxicity/photoallergenicity endpoints were evaluated based on UV spectra; p-tolyl acetate is not expected to be phototoxic/photoallergenic. The local respiratory toxicity endpoint was evaluated using the TTC for a Cramer Class I material, and the exposure to p-tolyl acetate is below the TTC (1.4 mg/day).The environmental endpoints were evaluated; p-tolyl acetate was found not to be PBT as per the IFRA Environmental Standards, and its risk quotients, based on its current volume of use in Europe and North America (i.e., PEC/PNEC), are <1.

Theoretical study on gas-phase reactions of nitrate radicals with methoxyphenols: Mechanism, kinetic and toxicity assessment.

Creosol and 4-ethylguaiacol are two important methoxyphenols, lignin pyrolysis products, which are discharge into the atmosphere in large quantities. In this work, theoretical calculations of the reaction mechanism towards the two compounds with NO3 radicals was performed using DFT method. The rate constants and toxicity assessment were also investigated. The atmospheric lifetime for creosol and 4-ethylguaiacol were 0.82 and 0.19 h, respectively. A new reaction pathway was proposed for the transformation of methoxyl into hydroxyl, which has not yet been clarified in previous studies. The toxicity of methoxyphenols and their degradation products is closely related to their hydrophobicity. Although most degradation products are less toxic, they also should be pay more attention, especially for nitro-substituents. A new reaction pathway was proposed for the transformation of methoxyl into hydroxyl. The toxicity is closely related to their hydrophobicity.

Assessment of ICount software, a precise and fast egg counting tool for the mosquito vector Aedes aegypti.

BACKGROUND: Widespread in the tropics, the mosquito Aedes aegypti is an important vector of many viruses, posing a significant threat to human health. Vector monitoring often requires fecundity estimation by counting eggs laid by female mosquitoes. Traditionally, manual data analyses have been used but this requires a lot of effort and is the methods are prone to errors. An easy tool to assess the number of eggs laid would facilitate experimentation and vector control operations. RESULTS: This study introduces a built-in software called ICount allowing automatic egg counting of the mosquito vector, Aedes aegypti. ICount egg estimation compared to manual counting is statistically equivalent, making the software effective for automatic and semi-automatic data analysis. This technique also allows rapid analysis compared to manual methods. Finally, the software has been used to assess p-cresol oviposition choices under laboratory conditions in order to test the system with different egg densities. CONCLUSIONS: ICount is a powerful tool for fast and precise egg count analysis, freeing experimenters from manual data processing. Software access is free and its user-friendly interface allows easy use by non-experts. Its efficiency has been tested in our laboratory with oviposition dual choices of Aedes aegypti females. The next step will be the development of a mobile application, based on the ICount platform, for vector monitoring surveys in the field.

Molecular simulations of water and paracresol in MFI zeolite--a Monte Carlo study.

Paracresol is a protein-bound toxin that is not efficiently eliminated by the hemodialysis method. Monte Carlo simulations in grand-canonical (GCMC) and canonical ensembles were performed to investigate the adsorption of paracresol and water in silicalite-1 zeolite. GCMC simulations using a configurational-biased algorithm show that four paracresol molecules are adsorbed at the channel intersections per unit cell of silicalite-1. The adsorption isotherms of water with and without the presence of paracresol at the intersections were investigated. A cooperative phenomenon in the process of coadsorption has been observed: at very low chemical potential, paracresol facilitates the penetration of water into silicalite-1. This mechanism is interpreted in terms of the properties of the zeolite and paracresol molecules. A thermodynamic cycle is used to calculate the adsorption energy of paracresol in silicalite-1. The calculated adsorption energy reasonably agrees with the experimental data.

Adsorption into the MFI zeolite of aromatic molecule of biological relevance. Investigations by Monte Carlo simulations.

Adsorption of paracresol and water into the silicalite-1 (MFI) zeolite has been investigated using canonical and grand-canonical Monte Carlo simulations. The most stable sites of adsorption of paracresol are found to be located at the channel intersections. Grand-canonical simulations have shown that at low loading, water molecules adsorb preferably at the vicinity of paracresol molecules, whereas they are also located in the sinusoidal channels as the loading increases. In order to explain the experimental adsorption isotherm observed for the coadsorption of water and paracresol in the MFI zeolite we propose a new concept of apparent adsorption enthalpy that varies with the concentration of the solution. The mathematical expression for the apparent enthalpy is introduced in an adsorption isotherm model. We shall refer to this theoretical isotherm as a non-langmuirian isotherm. The non-linear expression for the apparent adsorption enthalpy accounts for a variable accessibility of the sites of adsorption with respect to the concentration of the solution.

Feasibility of scaling from pilot to process scale.

The pharmaceutical industry is looking for new technology that is easy to scale up from analytical to process scale and is cheap and reliable to operate. Large scale counter-current chromatography is an emerging technology that could provide this advance, but little was known about the key variables affecting scale-up. This paper investigates two such variables: the rotor radius and the tubing bore. The effect of rotor radius was studied using identical: length, beta-value, helix angle and tubing bore coils for rotors of different radii (50 mm, 110 mm and 300 mm). The effect of bore was researched using identical: length, helix angle and mean beta-value coils on the Maxi-DE centrifuge (R=300 mm). The rotor radius results show that there is very little difference in retention and resolution as rotor radius increases at constant bore. The tubing bore results show that good retention is maintained as bore increases and resolution only decrease slightly, but at the highest bore (17.5 mm) resolution can be maintained at very high flow rates making it possible for process scale centrifuges to be designed with throughputs exceeding 25 kg/day.