Assessment of an online tooth morphology course and 3D examination tool during the COVID-19 pandemic.

INTRODUCTION: The COVID-19 pandemic brought major disruptions to dental teaching and has impacted the delivery of tooth morphology courses where students are introduced to the three-dimensional features of the dentition. The aim of this study was to assess the implementation of newly developed online teaching modalities for tooth morphology, evaluate their usefulness and identify elements that are beneficial for learners. MATERIALS AND METHODS: Following the delivery of an online course that included online 3D models, 2D cue cards, live discussion sessions and Socrative™ quizzes, the participants were asked to rate the usability and usefulness of each tool. The participants' knowledge of tooth morphology was assessed through an online examination using 3D-digitised tooth models. RESULTS: The participants identified lecture handouts and online 3D models as their preferred learning tools, while lecture video recordings and 2D cue cards were viewed as less useful. Data analysis from Socrative™ quizzes demonstrated improvement in tooth identification skills throughout the course delivery. Finally, results from the final assessment are in line with previous in-person deliveries of this course. CONCLUSIONS: The study provides valuable information on the usefulness of teaching modalities that were implemented in response to the COVID-19 pandemic and their merit to be retained in future deliveries of the course. The 3D models have been identified as particularly useful in this context, but the participants still value the opportunity to learn with extracted teeth. Furthermore, it remains to be confirmed whether tooth identification skills acquired using 3D models can be transferred to the clinical setting.

The effectiveness of a 3D virtual tooth identification test as an assessment tool for a dental anatomy course.

INTRODUCTION: There has been a recent demand in dental education for distance learning and the use of virtual assessment tools that can leverage technology to potentially replace physical testing facilities. However, virtual tools that evaluate student learning should be validated prior to adoption. The aim of this study was to investigate the effectiveness, efficiency and user satisfaction of a 3D tooth identification test for a dental anatomy course that can be given remotely. MATERIALS AND METHODS: First-year dental students (n = 41) enrolled in a dental anatomy course took both traditional in-person practical and virtual 3D tooth identification tests consisting of 25 test items. The test scores, average test durations, faculty time commitment and user perception were collected and analysed. Pearson product-moment correlation coefficients (p < .05) were determined for the criterion measures including real tooth identification test scores, comprehensive written examination and overall grade for the course. RESULTS: The average number of correct answers for the real and 3D virtual tooth identification examination was 21.3 ± 2.65 and 20.7 ± 2.56, respectively. The average test duration for the real and 3D virtual tooth identification test was 25:00 and 21:16 min, respectively. There was a positive correlation (p < .05) of the 3D virtual tooth identification test with the real tooth identification test (0.368), comprehensive written examination (0.334) and the overall course grade (0.646). The total faculty time commitment for the real and 3D virtual tooth identification test was 96 and 65 min, respectively. The students cited difficulty in manipulating the 3D models. CONCLUSION: This study presents evidence that the 3D virtual tooth identification test can be used to assess dental students' understanding of dental anatomy effectively and efficiently.

Association between low potassium intake and the number of teeth in Korean adults: based on the national data (2013-2015).

General health and oral health are very closely related. This study aimed to analyze the nutritional factors associated with the number of present teeth in Korean elderly adults. A total of 6,356 individuals were surveyed from the sixth Korean National Health and Nutrition Examination Survey conducted from 2013-2015. The number of existing teeth was divided into three categories: 0-10, 11-20, and over 21, and the nutrition survey covers eating habits, food frequency and food intake using face-to-face interviews. Multiple logistic regression analysis was performed to evaluate the association between nutrient intake and the number of existing teeth after adjusting for socio-demographic factors and general and oral health behaviors and status. As age increases, the number of teeth decreases. Individuals with more teeth had a significantly higher mean daily intake of protein, calcium, phosphorus, potassium and riboflavin (p < 0.05). After adjusting for sociodemographic factors in model 1 and the lower number of teeth in model 2, the strength of the association between the number of teeth and daily calcium intake remained significant. Statistically significant associations were present for dietary potassium intake in models 1 and 2 and in the 11-20 teeth group in model 3 (p < 0.05). We demonstrated a significant association between calcium and potassium intake and the number of teeth.

Uncloaking a Lost Cause: Decolonizing ancestry estimation in the United States.

Since the professionalization of US-based forensic anthropology in the 1970s, ancestry estimation has been included as a standard part of the biological profile, because practitioners have assumed it necessary to achieve identifications in medicolegal contexts. Simultaneously, forensic anthropologists have not fully considered the racist context of the criminal justice system in the United States related to the treatment of Black, Indigenous, and People of Color; nor have we considered that ancestry estimation might actually hinder identification efforts because of entrenched racial biases. Despite ongoing criticisms from mainstream biological anthropology that ancestry estimation perpetuates race science, forensic anthropologists have continued the practice. Recent years have seen the prolific development of retooled typological approaches with 21st century statistical prowess to include methods for estimating ancestry from cranial morphoscopic traits, despite no evidence that these traits reflect microevolutionary processes or are suitable genetic proxies for population structure; and such approaches have failed to critically evaluate the societal consequences for perpetuating the biological race concept. Around the country, these methods are enculturated in every aspect of the discipline ranging from university classrooms, to the board-certification examination marking the culmination of training, to standard operating procedures adopted by forensic anthropology laboratories. Here, we use critical race theory to interrogate the approaches utilized to estimate ancestry to include a critique of the continued use of morphoscopic traits, and we assert that the practice of ancestry estimation contributes to white supremacy. Based on the lack of scientific support that these traits reflect evolutionary history, and the inability to disentangle skeletal-based ancestry estimates from supporting the biological validity of race, we urge all forensic anthropologists to abolish the practice of ancestry estimation.

Intratubular penetration of endodontic sealers depends on the fluorophore used for CLSM assessment.

Root canal filling aims at eliminating empty spaces into the root canal system using biologically compatible materials. Three-dimensional root canal obturation must prevent or minimize the reinfection caused by microorganisms' leakage. This study aimed at evaluating whether fluorophore (Rhodamine or Fluo-3) influences the CLSM images of intratubular penetration of four endodontic sealers. Eighty bovine teeth were prepared using K files up to a size #70 and irrigated with 2.5% sodium hypochlorite. All roots were divided into eight groups (n = 10) according to the sealer and fluorophore used: AH Plus/Rhodamine, AH Plus/Fluo-3, Sealer Plus/Rhodamine, Sealer Plus/Fluo-3, Sealer Plus BC/Rhodamine, Sealer Plus BC/Fluo-3, Endosequence/Rhodamine, and Endosequence/Fluo-3. All roots were filled using cold lateral compaction technique. After 7 days, the roots were transversely sectioned, and three slices, one of each canal third, were obtained. Intratubular penetration was evaluated using CLSM. Sealer Plus BC/Rhodamine and Endosequence BC/Rhodamine presented higher intratubular penetration than AH Plus/Fluo-3 and Sealer Plus/Fluo-3 (p ˂ .05). The intragroup analysis showed similar intratubular penetration, regardless of the root third, except for the apical third in AH Plus/Fluo-3 and Sealer Plus BC/Fluo-3 groups. The type of fluorophore influences the calcium silicate sealers' tubular penetration but not of epoxy resin-based ones using CLSM. Bioceramic sealers should not be used associated with Rhodamine for CLSM evaluation. RESEARCH HIGHLIGHTS: The type of fluorophore influences the calcium silicate sealers' tubular penetration but not of epoxy resin-based ones when CLSM is used for assessment. Bioceramic sealers should not be used associated with Rhodamine.

A critical assessment of the potential for Structure-from-Motion photogrammetry to produce high fidelity 3D dental models.

OBJECTIVES: The recent proliferation of methods of 3D model generation has enabled the development of new approaches to the analysis of dental form, function and wear. This article assesses whether Structure-from-motion (SfM) photogrammetry is capable of producing virtual 3D models of teeth of adequate quality for assessing fine scale surface details, such as dental macrowear patterns. Reference models were generated using a high resolution structured light scanner to assess the accuracy of the photogrammetric models generated. MATERIALS AND METHODS: Dental gypsum models of the molar teeth of human individuals from St. Michael's Litten, Chichester, Post-medieval assemblage (n = 17) were used for 3D model generation. Photogrammetry was performed using Agisoft Metashape and reference 3D models were generated using a GOM ATOS 80 scanner. Focus stacking was explored as a method of enhancing 3D model detail. Differences between the photogrammetric and reference models were assessed using CloudCompare and the quality of the surface detail was examined quantitatively using Occlusal Fingerprint Analysis. RESULTS: Photogrammetric model generation was highly replicable and the tooth models produced closely approximated the overall geometry of those derived from the structured light scanner. Dental wear facet area measurements on the photogrammetric models differed significantly, however, from those derived from the structured light scanning reference models. DISCUSSION: Photogrammetry can create virtual dental models from which crude quantitative size and shape data can be obtained. Finer scale surface details are not accurately reproduced on SfM models using the methods outlined in the current article due to high levels of surface noise.

An accurate and efficient method for occlusal tooth wear assessment using 3D digital dental models.

Tooth or material wear in a dentition is a common finding that requires timely diagnosis for management and prevention of further loss or associated esthetic or functional impairment. Various qualitative and quantitative methods have been suggested to measure tooth or material wear, but they present with limitations, such as imprecision, subjectivity, or high complexity. Here we developed and assessed an efficient 3D superimposition method to accurately measure occlusal tooth wear on 3D digital dental models. For this purpose, teeth on plaster casts were manually grinded on their occlusal surfaces to simulate various degrees of tooth wear. The casts were scanned using a surface scanner. Grinded tooth crowns (T1) were segmented and compared to the original crowns (T0) using five 3D surface superimposition techniques and a gold standard technique (GS). GS measurements were obtained by using intact adjacent structures as superimposition references. The technique of choice (complete crown with 30% estimated overlap of meshes) showed the best reproducibility (maximum difference < 0.050 mm3) and excellent agreement with the GS technique (median difference: 0.032 mm3). The suggested 3D superimposition method offers a highly efficient and accurate tool for tooth wear assessment, which could be applicable to clinical conditions.

CBCT assessment of bone thickness in maxillary and mandibular teeth: an anatomic study.

OBJECTIVE: The site of the sinus tract depends on the rate of resistance against abscess exudate drainage, bone morphology, and distance from the root apex to the outer cortical bone. To assess apical bone thickness in buccal and palatal/lingual aspects of maxillary and mandibular teeth, using a high-resolution cone-beam computed tomography (CBCT) system. METHODOLOGY: In total, 422 CBCT examinations were included in the study, resulting in a sample of 1400 teeth. The scans were acquired by PreXion 3D, with a high-resolution protocol. The bone thickness was taken as the distance between the center of the apical foramen and the buccal and lingual/palatal cortical bone. The quantitative variables were expressed as mean values±standard deviation. The independent samples were analyzed using the t-test or the Mann-Whitney test (p<0.05). RESULTS: The lowest mean value of bone thickness was observed in the buccal cortical bone of the upper canines (1.49 mm±0.86) and in the upper central incisors (1.59 mm±0.67). In premolar teeth, the lowest values were found in the buccal cortical bone of upper first premolars (1.13 mm±0.68). In the posterior teeth, the lowest values were found in the buccal cortical bone of upper first molars (1.98 mm±1.33). In the lower second molar region, the buccal cortical bone (8.36 mm±1.84) was thicker than the lingual cortical bone (2.95 mm±1.16) (p<0.05). CONCLUSIONS: The lowest mean values of bone thickness are in the buccal cortical bone of the maxillary teeth. In the mandible, bone thickness is thinner in the buccal bone around the anterior and premolar teeth, and in the lingual aspect of mandibular molars. All these anatomic characteristics could make the occurrence of the sinus tract more susceptible in these specific regions of the maxillary and mandibular alveolar bone.

CBCT assessment of bone thickness in maxillary and mandibular teeth: an anatomic study

Abstract The site of the sinus tract depends on the rate of resistance against abscess exudate drainage, bone morphology, and distance from the root apex to the outer cortical bone. Objective To assess apical bone thickness in buccal and palatal/lingual aspects of maxillary and mandibular teeth, using a high-resolution cone-beam computed tomography (CBCT) system. Methodology In total, 422 CBCT examinations were included in the study, resulting in a sample of 1400 teeth. The scans were acquired by PreXion 3D, with a high-resolution protocol. The bone thickness was taken as the distance between the center of the apical foramen and the buccal and lingual/palatal cortical bone. The quantitative variables were expressed as mean values±standard deviation. The independent samples were analyzed using the t-test or the Mann-Whitney test (p<0.05). Results The lowest mean value of bone thickness was observed in the buccal cortical bone of the upper canines (1.49 mm±0.86) and in the upper central incisors (1.59 mm±0.67). In premolar teeth, the lowest values were found in the buccal cortical bone of upper first premolars (1.13 mm±0.68). In the posterior teeth, the lowest values were found in the buccal cortical bone of upper first molars (1.98 mm±1.33). In the lower second molar region, the buccal cortical bone (8.36 mm±1.84) was thicker than the lingual cortical bone (2.95 mm±1.16) (p<0.05). Conclusions The lowest mean values of bone thickness are in the buccal cortical bone of the maxillary teeth. In the mandible, bone thickness is thinner in the buccal bone around the anterior and premolar teeth, and in the lingual aspect of mandibular molars. All these anatomic characteristics could make the occurrence of the sinus tract more susceptible in these specific regions of the maxillary and mandibular alveolar bone.

Accuracy of digital dental models using the low-cost DAVID laser scanner.

BACKGROUND: Accurate laser scanning of plaster casts using validated, low-cost hardware represents a key issue in 3D orthodontics. OBJECTIVES: The aim of this study was to compare the accuracy of measurements taken from plaster casts (gold standard) with digital models of those casts created with a low-cost structural light DAVID laser scanner. MATERIAL AND METHODS: Five different measurements were taken on each of 14 plaster casts by 2 independent observers with an electronic caliper. The measurements were repeated 10 times on all 14 plaster casts by each observer, with a 1-week interval between each set of measurements. All 14 plaster casts were digitized using a low-cost DAVID SLS 3 laser scanner. The same 5 measurements were performed on each of the 3D virtual surface models of the 14 plaster casts by 2 independent observers using Meshlab software in a manner similar to that used with the digital caliper. The measurements were repeated 10 times by the 2 observers with 1 week between each set of measurements. RESULTS: The laser-scanned models were more accurate than the plaster cast models in defining measurements based on simple tooth fissures. The accuracy of measurements based on complex tooth fissures were equivalent for the 2 types of model. For measurements based on interproximal dental contacts, the 2 methods of measurement were similar and both were notably poor in terms of accuracy. CONCLUSIONS: Three-dimensional virtual models obtained from the low-cost DAVID laser scanner can be used clinically, but only for certain types of measurements and indications.

"The dead shall be raised": Multidisciplinary analysis of human skeletons reveals complexity in 19th century immigrant socioeconomic history and identity in New Haven, Connecticut.

In July 2011, renovations to Yale-New Haven Hospital inadvertently exposed the cemetery of Christ Church, New Haven, Connecticut's first Catholic cemetery. While this cemetery was active between 1833 and 1851, both the church and its cemetery disappeared from public records, making the discovery serendipitous. Four relatively well-preserved adult skeletons were recovered with few artifacts. All four individuals show indicators of manual labor, health and disease stressors, and dental health issues. Two show indicators of trauma, with the possibility of judicial hanging in one individual. Musculoskeletal markings are consistent with physical stress, and two individuals have arthritic indicators of repetitive movement/specialized activities. Radiographic analyses show osteopenia, healed trauma, and other pathologies in several individuals. Dental calculus analysis did not identify any tuberculosis indicators, despite osteological markers. Isotopic analyses of teeth indicate that all four were likely recent immigrants to the Northeastern United States. Nuclear and mitochondrial DNA were recovered from three individuals, and these analyses identified ancestry, hair/eye color, and relatedness. Genetic and isotopic results upended our initial ancestry assessment based on burial context alone. These individuals provide biocultural evidence of New Haven's Industrial Revolution and the plasticity of ethnic and religious identity in the immigrant experience. Their recovery and the multifaceted analyses described here illuminate a previously undescribed part of the city's rich history. The collective expertise of biological, geochemical, archaeological, and historical researchers interprets socioeconomic and cultural identity better than any one could alone. Our combined efforts changed our initial assumptions of a poor urban Catholic cemetery's membership, and provide a template for future discoveries and analyses.

North and south: A comprehensive analysis of non-adult growth and health in the industrial revolution (AD 18th-19th C), England.

OBJECTIVE: Stark health inequalities exist in the present day between the North and South of England, with people in the South, overall, experiencing better health across a range of parameters (e.g., life expectancy and number of years spent in good health). Bioarchaeological studies of skeletal remains from cemeteries across this geographical divide have the ability to provide a temporal perspective on the etiology, longevity, and nature of this disparity. METHODS: In total 574 non-adults (0-17 years) from six urban sites (c. AD 1711-1856) were analyzed from the North and South of England. Measurements of long bone length, cortical thickness, and vertebral dimensions were analyzed alongside both skeletal and dental palaeopathological data to assess patterns of disease and growth disruption between skeletal samples. RESULTS: There were few significant differences in growth parameters between the six sites in relation to geographical location. However, the northern-based sample Coach Lane (North Shields) demonstrated some of the highest rates of pathology, with metabolic disease being particularly prevalent. DISCUSSION: Northern and southern populations suffered alike from the detrimental environmental conditions associated with urban centers of the 18th-19th centuries. However, the elevated prevalence of vitamin D deficiency seen within the Coach Lane sample is indicative of a regionally specific risk that may be related to latitude, and/or the influence of particular industries operating in the North-East.

Development and Assessment of a Three-Dimensional Tooth Morphology Quiz for Dental Students.

Tooth morphology has a pivotal role in the dental curriculum and provides one of the important foundations of clinical practice. To supplement tooth morphology teaching a three-dimensional (3D) quiz application (app) was developed. The 3D resource enables students to study tooth morphology actively by selecting teeth from an interactive quiz, modify their viewpoint and level of zoom. Additionally, students are able to rotate the tooth to obtain a 3D spatial understanding of the different surfaces of the tooth. A cross-over study was designed to allow comparison of students' results after studying with the new application or traditionally with extracted/model teeth. Data show that the app provides an efficient learning tool and that students' scores improve with usage (18% increase over three weeks, P < 0.001). Data also show that student assessment scores were correlated with scores obtained while using the app but were not influenced by the teaching modality initially accessed (r2  = 0.175, P < 0.01). Comparison of the 2016 and 2017 class performance shows that the class that had access to the app performed significantly better on their final tooth morphology assessment (68.0% ±15.0 vs. 75.3% ±13.4, P < 0.01). Furthermore, students reported that the 3D application was intuitive, provided useful feedback, presented the key features of the teeth, and assisted in learning tooth morphology. The 3D tooth morphology app thus provides students with a useful adjunct teaching tool for learning dental anatomy. Anat Sci Educ 00: 000-000. © 2018 American Association of Anatomists.

The Middle Pleistocene (MIS 12) human dental remains from Fontana Ranuccio (Latium) and Visogliano (Friuli-Venezia Giulia), Italy. A comparative high resolution endostructural assessment.

The penecontemporaneous Middle Pleistocene sites of Fontana Ranuccio (Latium) and Visogliano (Friuli-Venezia Giulia), set c. 450 km apart in central and northeastern Italy, respectively, have yielded some among the oldest human fossil remains testifying to a peopling phase of the Italian Peninsula broadly during the glacial MIS 12, a stage associated with one among the harshest climatic conditions in the Northern hemisphere during the entire Quaternary period. Together with the large samples from Atapuerca Sima de los Huesos, Spain, and Caune de l'Arago at Tautavel, France, the remains from Fontana Ranuccio and Visogliano are among the few mid-Middle Pleistocene dental assemblages from Western Europe available for investigating the presence of an early Neanderthal signature in their inner structure. We applied two- three-dimensional techniques of virtual imaging and geometric morphometrics to the high-resolution X-ray microtomography record of the dental remains from these two Italian sites and compared the results to the evidence from a selected number of Pleistocene and extant human specimens/samples from Europe and North Africa. Depending on their preservation quality and on the degree of occlusal wear, we comparatively assessed: (i) the crown enamel and radicular dentine thickness topographic variation of a uniquely represented lower incisor; (ii) the lateral crown tissue proportions of premolars and molars; (iii) the enamel-dentine junction, and (iv) the pulp cavity morphology of all available specimens. Our analyses reveal in both samples a Neanderthal-like inner structural signal, for some aspects also resembling the condition shown by the contemporary assemblage from Atapuerca SH, and clearly distinct from the recent human figures. This study provides additional evidence indicating that an overall Neanderthal morphological dental template was preconfigured in Western Europe at least 430 to 450 ka ago.

Evaluation of colorimetric indices for the assessment of tooth whiteness.

OBJECTIVES: To evaluate the performance of existing equations that measure perceptual whiteness of teeth. METHODS: Three new psychophysical experiments were conducted and combined with two previously published experiments to form a large set of data to test performance of whiteness indices. Three whiteness indices (WIC, WIO, WID,) were compared with regard to their ability to measure perceived whiteness. Coefficient of determination (r2) and '% wrong decisions' were used as measures of performance. One of the new experiments involved 500 participants across five different countries to explore the effect of gender, age and culture on whiteness perception. RESULTS: Equations (WIO and WID) that have been optimized for use with tooth whiteness better correlated with visual perceptions of changes in tooth whiteness than the more general CIE whiteness index (WIC). The best performance was given by WIO (in terms of both r2 and % wrong decisions). No effect of age, gender or culture was found on whiteness perception. CONCLUSIONS: WIO is a robust method for assessing whiteness of human teeth.

Size Assessment of the Gray Reef Shark Carcharhinus amblyrhynchos Inferred from Teeth Marks on Human Wounds.

An accurate assessment of the biting shark size is paramount for better understanding the agonistic behavior of a species toward humans. The gray reef shark is involved in many accidental bites. Based on the capture of 35 gray sharks, we calculated the algorithm that allows the assessment of the shark size, through the interdental distance (IDD) inferred from teeth marks on human wounds. Our results show a negative allometric relationship and that IDD calculated from imprints perpetrated by the upper jaw are globally similar with those from the lower jaw, in spite of heterodonty. We applied our findings to two cases of accidental bites by this species. Both of the victims had declared that the shark length was "at least 2 m". Based on our algorithm, the assessment of the shark TL was approx. 180 and 160 cm, respectively, which correspond to an overestimation of ≥20% by the victims.

Ultrasound assessment of soft tissue augmentation around implants in the aesthetic zone using a connective tissue graft and xenogeneic collagen matrix - 1-year randomised follow-up.

PURPOSE: A comparative, ultrasound evaluation of the thickness of keratinized mucosa (TKT) around implants one year after gingival augmentation (GA) by means of a connective tissue graft (CTG) and the xenogeneic collagen matrix (CMX). MATERIALS AND METHODS: A total of 75 bone level tapered implants (Conelog® Camlog) were inserted in 57 patients in the aesthetic area of both jaws. The patients were divided into 3 groups: control group I- without GA; group II- GA 3 months before implantation, and group III- GA 3 months after implantation. Groups II and III were divided into two subgroups depends on type of material used for GA: (a) CMX (Mucograft®, Geistlich Pharma AG) and (b) CTG. The patients underwent a clinical and ultrasound examination before, then after 3 and 12 months following GA respectively to evaluate TKT at two points using ultrasound equipment (Pirop®, Echoson). Point 1 was considered to be in the middle of the line connecting the cemento-enamel junction (CEJ) to the adjacent teeth, and point 2 on the mucogingival junction (MGJ). RESULTS: Three months after GA, the highest increase in gingival thickness was noted in group IIIb (point 1 - 0.95mm, 2 - 1.01mm). However, 12 months after GA the highest gingival thickness was observed in group IIb (point 1 - 1.76mm, 2 - 1.36m) and next IIIb (point 1 - 1.52mm, 2 - 1.15mm). CONCLUSIONS: Both CTG and Geistlich Mucograft® increased TKT, but higher values were noted using CTG augmentation before implantation. An ultrasonic device can be used as a non-invasive, reliable, and reproducible method for evaluating TKT.

Building a Pediatric Oral Health Training Curriculum for Community Health Workers.

OBJECTIVES: Community health workers (CHWs) are a promising approach to oral health promotion in high-risk populations. This article describes the process of creating a pediatric oral health CHW training curriculum. DESIGN: Existing curricula were identified through outreach efforts to experts in the oral health and CHW fields, as well as PubMed and Google searches. After coding basic information, curricula were mapped to define oral health domains. Then group discussion was employed to determine final curriculum contents. SETTING: United States. INCLUSION CRITERIA: Curricula were included if they addressed oral health, were in English or Spanish, involved US populations, did not target dental clinicians, and whether sufficient data could be obtained. MAIN OUTCOME MEASURES: Curricula were evaluated for delivery format, number of hours, target audience, inclusion of CHWs, completeness, and oral health content. RESULTS: Eighteen unique curricula were identified; 14 (78%) were CHW specific. Pathologic factors, caries formation, toothbrushing basics, flossing, nutrition, sugar-sweetened beverages, oral health recommendations, baby bottle tooth decay, fluoride treatments, and fluoride were covered to some extent in 75% of curricula. More than half did not mention types of teeth, oral health during pregnancy, antifluoride, cultural humility, and special needs populations. After comparing CHW curricula with non-CHW curricula, the original 26 oral health domains were condensed into 10 CHW training domains. CONCLUSION: Using existing evidence and expert insight, an oral health CHW training curriculum outline was created that emphasizes behaviors, social support, and navigation assistance to promote preventive oral health behaviors in families of young children. This has implications beyond oral health. CHW programs are expanding to address the social determinants of health. The process of creating this curriculum and its basic elements can be applied to other disease areas. Clearly defined trainings that are made publicly available, such as this one, support efforts to standardize the CHW field in preparation for CHW certification and reimbursement in the future.

The Lip-Tooth-Ridge Classification: A Guidepost for Edentulous Maxillary Arches. Diagnosis, Risk Assessment, and Implant Treatment Indications.

Prosthetic rehabilitation of the edentulous maxilla is known to be challenging and requires meticulous planning. The purpose of this article is to describe a novel classification system, the Lip-Tooth-Ridge (LTR), that offers a guidepost for treatment planning the edentulous maxilla for fixed or removable prostheses. This tool will help clinicians identify the final prosthetic design and will provide a case-specific risk assessment guide regarding two different areas. A high (HER) or low (LER) esthetic risk will be determined based on lip dynamics, as well as a high or low structural risk according to the prosthetic space availability.

Computed tomographic assessment of equine maxillary cheek teeth anatomical relationships, and paranasal sinus volumes.

Disorders affecting the equine maxillary cheek teeth and paranasal sinuses are relatively common, but limited objective information is available on the dimensions and relationships of these structures in horses of different ages. The aims of this study were to assess age-related changes in the positioning and anatomical relationships of the individual maxillary cheek teeth with the infraorbital canal and maxillary septum and the volumes of the individual sinus compartments. CT and gross examination were performed on 60 normal equine cadaver heads that were aged by their dentition. The intrasinus position of cheek teeth, length of reserve crowns, relationship to the infraorbital canal and measurements of rostral drift and sinus compartment volumes were assessed from CT images. The findings included that Triadan 10 alveoli lay fully or partially in the rostral maxillary sinus (RMS) in 60% of cases. The infraorbital canal lay directly on the medial aspect of the alveolar apex in younger horses. The Triadan 11'sclinical crowns and apices drifted a mean of 2.48 and 2.83 cm more rostral to the orbit, respectively, in the >15 years old vs the <6 years old age group. The mean volumes of sinus compartments ranged from 175 cm3 for the caudal maxillary sinus (CMS) to 4 cm3 for the ethmoidal sinus (ES). This information should be of value in the diagnosis and treatment of equine dental and sinus disorders and as reference values for further studies.