Worldwide Assessment of the Root and Root Canal Characteristics of Maxillary Premolars - A Multi-center Cone-beam Computed Tomography Cross-sectional Study With Meta-analysis.

INTRODUCTION: This worldwide study examined the root and root canal characteristics of maxillary premolars and explored how demographic factors impact the outcomes. METHODS: Observers from 44 countries assessed 26,400 maxillary premolars using cone-beam computed tomography and employed a standardized screening method to gather data on multiple canal morphology and 3-rooted configuration (primary outcomes), as well as secondary outcomes related to root and root canal anatomies. Demographic factors such as ethnicity, sex, and age were collected for each participant. The intra- and inter-observer tests ensured observer reliability. Primary outcomes were represented as odds ratios and untransformed proportions accompanied by 95% confidence interval (CI) forest plots. Meta-analysis compared sub-groups and identified sources of heterogeneity (α = 5%). RESULTS: The overall prevalence of multiple canal morphology in the first premolar was 93.5% (95% CI, 93.3%-94.7%), while in the second premolar, it was 49.7% (95% CI, 44.9%-54.6%). The proportion of 3-rooted configuration was 1.8% (95% CI, 1.4%-2.1%) in the first premolar and 0.4% (95% CI, 0.3%-0.5%) in the second. Asian countries generally displayed fewer roots and root canals, while European nations showed higher counts (P < .05). Males exhibited higher percentages and odds ratios for both outcomes in both premolars. Younger patients demonstrated lower percentages of multiple root canal morphologies (P < .05). Factors such as tooth side, voxel size and field-of-view did not influence the outcomes (P > .05). CONCLUSIONS: The worldwide assessment of root and root canal characteristics of maxillary premolars has revealed a discernible influence of various factors such as tooth type, geographical region, ethnicity, sex, and age.

Assessment of the canal anatomy of the premolar teeth in a selected Turkish population: a cone-beam computed tomography study.

BACKGROUND: Teeth may have additional roots and a different number of root canals. Overlooked root canals may cause endodontic failure. The aim of this study was to investigate the prevalence of root canals and the number of roots of premolars in a selected Turkish population. MATERIALS AND METHODS: A total of 2,570 teeth from 1,438 patients were evaluated. The cone-beam computed tomography scans of 1,055 maxillary and 1,515 mandibular premolars were examined. RESULTS: Type IV root canal morphology was observed most frequently in maxillary first premolars (77%), and the rates of single and double channel formations were very similar (51% and 49%, respectively). Of the second maxillary premolars, 57.4% had Type I morphology, and 89.9% of the teeth were single-rooted, while 68.6% had a single root canal. The most common formation was Type I (85%) among mandibular first premolars, and a single root was observed in 95.6% of these teeth. In addition, 87% of the mandibular first premolars had a single root canal. The second mandibular premolars mostly had Type I (95.4%) formation, and 99.3% of the teeth were single-rooted, while 96.9% had a single root canal. CONCLUSION: According to our findings, 51% of maxillary first premolars had a single root, 79.4% had two root canals, and 77% had Type IV (77%) formation. Maxillary second premolars mostly had Type I formation. In addition, a single root and single root canal formation were most common. Mandibular first premolars generally had a single root and single root canal formation, but 13% had two root canals, and 6.4% had Type V formation. More than 95% of mandibular second premolars had Type I formation.

Assessment of the Root Canal Similarity in Contralateral Mandibular Incisors.

INTRODUCTION: The purpose of this study was to determine the degree of similarity between contralateral mandibular incisors utilising 3-dimensional (3D) models obtained from micro-computed tomographic (micro-CT) scans of extracted human teeth. The null hypothesis was that contralateral mandibular incisors do not exhibit matching symmetry. METHODS: Sixty pairs (n = 120) of extracted mandibular incisors were obtained from 30 patients and scanned with micro-CT with a voxel size of 15.0 µm. 3D virtual models of the pulpal cavities were rendered. Geometric morphometric deviation analysis was performed after mirroring, automatic alignment, and co-registration of the models of contralateral teeth root mean square (RMS) errors were calculated. The quantitative analysis of the 3D models included 6 different geometric parameters. Data sets were examined with a 2-sample Kolmogorov-Smirnov test. Post hoc retrospective power analysis was performed to find statistical power (α = 0.05). RESULTS: Contralateral pairs had a narrower distribution in deviation than random pairs. Also, contralateral pairs showed a statistically higher similarity coefficient (5 out of 6 geometric parameters) compared to random pairs (P < .001); no difference was found when comparing central to lateral pairs or between Vertucci type I configurations compared to non-type I. RMS errors had significantly lower Contralateral premolars (CPs) values than random pairs (P < .001). CONCLUSIONS: A high degree of similarity was demonstrated for pairing contralateral mandibular incisors using 3D models. The similarity between contralateral central and lateral incisors suggests that when screened and matched, these 4 teeth might be used in endodontic research where similar root canal anatomy is crucial.

A novel three-dimensional quantitative assessment method for abnormal root morphology of the maxillary premolars in vivo on cone-beam computed tomography.

BACKGROUND: Previous studies have described and recorded abnormal root morphology; however, most of these studies were based on two-dimensional periapical or panoramic radiographs, and only a few studies have quantified it. We aimed to combine two-dimensional periapical radiographs and three-dimensional cone-beam computed tomography (CBCT) to conduct qualitative judgments and quantitative analyses of normal and conical roots, and explore the clinical diagnostic method of normal and conical roots based on intraoral radiographs and CBCT. METHODS: The conical root was identified visually on periapical radiographs as the clinical gold standard. All teeth were divided into the cone-rooted teeth (CRT) or normal-rooted teeth (NRT) groups. Furthermore, differences in root length (RL), root surface area (RSA), and root volume (RV) of conical and normal roots in the maxillary premolars on CBCT were compared. Receiver operator characteristic curves were generated, and the area under the curve (AUC) and cut-off values were calculated to evaluate the diagnostic value of RV, RSA, RV/RL, and RSA/RL. RESULTS: The RSAs of NRT and CRT were 236.88 ± 27.93 mm2 and 207.98 ± 27.80 mm2, respectively (P = 0.000). The mean RV in the CRT group was lower than that in the NRT group, and the difference was statistically significant (253.40 ± 41.98 mm3 vs. 316.93 ± 49.89 mm3, P = 0.000). The RSA and RV of conical roots in single root premolars were 12.29% and 19.33% less than those of normal roots, respectively. The AUC values of RSA/RL and RV/RL were 0.87 and 0.89, respectively, and the best cut-off values were 19.61 for RSA/RL (if RSA/RL was < 19.61, the teeth were considered CRT) and 24.05 for RV/RL (if RV/RL was < 24.05, the teeth were considered CRT). CONCLUSIONS: CBCT has significant diagnostic value in the clinical evaluation of conical roots. RSA/RL and RV/RL were the best parameters with the largest AUC and high sensitivity and specificity.

Assessment of maxillary premolar region in relation to maxillary sinus floor and buccal bone plate: a cone beam computed tomography study / Evaluación de la región premolar maxilar en relación con el piso del seno maxilar y la tabla osea vestibular: estudio de tomografía computarizada de haz cónico

The maxillary sinus floor location and the buccal bone plate are factors to be considered in the long-term success with implant treatments mainly in the premolar region. the aim of this study was to establish morphometric characteristics of the buccal cortical bone (BCB) thickness of maxillary premolars and its relation to maxillary sinus floor through CBCT. In this study 350 first and second maxillary premolars were analyzed from 110 CBCT images and the buccal cortical bone (BCB) was measured in a coronal view at the major axis level of each premolar. In addition, in 200 first and second maxillary premolars CBCT images were measured the distance from premolar apex to maxillary sinus floor (MSF) in both frontal and sagittal plane. The type of relationship between the apex and MSF was classified according to Ok et al. (2014). The second premolar was observed with higher values of BCB (p<0.001). In first premolar, higher values were observed in the male sex (p>0.05). In second premolar, only significantly higher values were observed in the male sex in MA-MB-MC (p>0.05). Regarding to MSF and its relation to premolar roots, it was observed that 10 % of the sample was classified as type I, 19 % as type II, 55.5 % as type III and 15.5 % as type IV. The BCB of the upper premolar region is thicker in the apical region and decreases toward the coronal region. Almost 50 % of apex of second premolars are closely and risky related MSF (Type I and II).

La localización del piso del seno maxilar (PSM) y la tabla ósea vestibular (TOV) son factores a considerar en el éxito a largo plazo de los tratamientos de implante dental en la región premolar. El objetivo de este estudio fue establecer características morfométricas del grosor de la TOV en los premolares maxilares y su relación con el PSM a través de CBCT. Se analizaron 350 primeros y segundos premolares en 110 CBCT y la TOV fue medida en vista coronal en el eje axial mayor de cada premolar. Además en 200 primeros y segundos premolares maxilares se midió la distancia desde el ápice del diente hasta el PSM en el plano sagital y frontal. El tipo de relación entre el ápice y el PSM se clasificó según Ok et al. (2014). El Segundo premolar obtuvo los mayores valores de grosor de TOV (p<0.001). En primeros premolares se observaron valores altos en el género masculino (p>0.05). En segundos premolares solo se encontraron valores significativamente altos en el género masculino en MA-MB-MC (p>0.05). En la relación con el PSM y ápices de raíces de premolares, el 10% de la muestra se clasificó como tipo I, el 19% como tipo II, el 55,5% como tipo III y el 15.5% como tipo IV. En conclusión la TOV de la región premolares superior es más grueso en la zona apical, decreciendo hacia la zona coronal. Alrededor del 50% de los ápices de raíces de premolares maxilares están cercanas y en relación de riesgo con el PSM (tipo I y II).

Assessment of morphological and anatomical characteristics of mental foramen using cone beam computed tomography.

PURPOSE: To determine the shape, position, vertical height, surrounding bone characteristics, and opening angle of mental foramen (MF) using dental cone beam computed tomography (CBCT). METHODS: A retrospective study was performed on 663 patients. CBCT records analyzed for the shape, position, and surrounding bone measurements of the MF using Simplant 3D software (Hasselt, Belgium). Opening angle of MF was also assessed. Kruskal-Wallis and Mann-Whitney U tests were employed to test significant differences between parameters, genders and ages. RESULTS: All mental foramina were visualized. Regarding location, 49.2% of the MFs were located between first and second premolars, 7.7 distal and 39.7% coincident to the apex of the mandibular second premolar. The mean MF opening angle was 45.4° on the right side, and 45.9° on the left. There were no statistically differences between gender groups with regard to the opening angle degrees. CONCLUSIONS: This study may provide useful information about variations in the position, shape and size, angle of mental foramen, which may help the practitioners to perform safer mental nerve blocks and surgical procedures.

Assessment of the relationship between the maxillary sinus floor and the upper posterior root tips: Clinical considerations.

AIM: The purpose of the present study was to evaluate the relationship between the maxillary sinus floor and the upper posterior root tips in the Colombian population using cone-beam computed tomography. METHODS: A total of 1656 roots were analyzed (1104 molars and 552 premolars), classified as types I (outside the maxillary sinus) and II (inside the maxillary sinus). RESULTS: The results showed that the palatal root of the maxillary first molar was most frequently found inside the antrum. CONCLUSIONS: Understanding the relationship between the maxillary sinus floor and the upper posterior root tips is important to the clinician when performing conventional or surgical endodontic treatment and conventional surgery procedures in order to minimize or avoid the risk of damaging the maxillary sinus.

Assessment of Posterior Teeth Preparations for Metal-Ceramic Crowns.

OBJECTIVES: To evaluate teeth preparation designs for metal-ceramic crowns in private dental practice in Jordan. MATERIALS AND METHODS: One-hundred and seventy two dies were included. Different aspects of tooth preparations were quantified, analyzed and compared with the recommended guidelines. RESULTS: Almost 64% of preparations finish lines were positioned subgingivally. Shoulder finish lines were observed in 74.4% where-as 22.7% showed chamfer finish lines. Total occlusal convergence angles were 29.8 degrees in BL plane, 247 degrees in MD plane. CONCLUSIONS: Dental practitioners in private practice in Jordan did not fully adhere to the recommendedguidelines for tooth preparations for MCRs.

Three-dimensional assessment of teeth first-, second- and third-order position in Caucasian and African subjects with ideal occlusion.

BACKGROUND: The aim of this study was to provide an updated version of Andrews' seminal study by exploiting 3D software to analyse the tip, torque and in-out values of two groups of different racial and ethnic background. METHODS: The analysis was conducted on one Caucasian group (30 individuals) and one of African origin (29). All subjects were adult, in normal occlusion and had no previous history of orthodontic treatment. Rhinoceros™ 3D modelling software was used to identify anatomical reference points, planes and axes and to make the appropriate measurements. RESULTS: Compared to Andrews' measurements, we found more positive coronal tip values in both African and Caucasian subjects, while the torque values we measured tended to be less negative in the posterior sectors than those reported by Andrews. We measured greater tip values in the lower jaw of Caucasian with respect to African subjects, particularly in the middle sectors. CONCLUSIONS: Race and ethnicity have a strong influence on values of tip, torque and in-out. This is translated as a more positive tip in Caucasian subjects and a more positive torque in those of African descent (greater proclination of the incisors). Finally, with respect to the values reported by Andrews, we found a tendency to more positive mean tip (except for at the upper second molars and lower incisors) and less negative torque in the posterior sectors.

Clinical use of a direct chairside oral scanner: an assessment of accuracy, time, and patient acceptance.

INTRODUCTION: Chairside oral scanners allow direct digital acquisition of the intraoral situation and can eliminate the need for conventional impressions. In this study, we aimed to assess accuracy, scan time, and patient acceptance of a chairside oral scanner when used for full-arch scans; these are critical factors for acceptance of this technology in the orthodontic setting. METHODS: Fifteen patients had digital models made from both intraoral scans (Lava COS; 3M ESPE, St Paul, Minn) and alginate impressions. Each procedure was timed, and patient preference was assessed with a survey. In addition, digital models were made from 5 plaster model pairs using the intraoral scanner and an orthodontic model scanner. Model pairs were digitally superimposed, and differences between models were quantified. Accuracy was assessed using the Bland-Altman method. Time differences were tested for statistical significance with the Student t test. RESULTS: Digital models made using the chairside oral scanner and either impressions or the orthodontic model scanner did not differ significantly. The chair time required to take impressions was significantly shorter than the time required for the intraoral scans. When processing time was included, the time requirement did not differ significantly between methods. Although 73.3% of the patients preferred impressions because they were "easier" or "faster," 26.7% preferred the scan because it was "more comfortable." CONCLUSIONS: Despite the high accuracy of chairside oral scanners, alginate impressions are still the preferred model acquisition method with respect to chair time and patient acceptance. As digital technology continues to progress, intraoral scanning may become more accepted for use in orthodontics.

Assessment of the separation incidence of reciprocating WaveOne files: a prospective clinical study.

INTRODUCTION: Despite metallurgical advancements in the nickel-titanium file manufacturing process, file separation remains a concern. The purpose of this prospective clinical study was to assess the separation incidence of the reciprocating WaveOne file (Dentsply Tulsa Dental Specialties, Tulsa, OK) when used to prepare root canals of posterior teeth. METHODS: File separation incidence was assessed over an 18-month period in which 4 experienced and calibrated endodontists performed conventional endodontic treatment on posterior teeth using the WaveOne file system. The separation incidence was determined based on both the number of teeth and the number of canals instrumented during this time period. RESULTS: A total of 2,215 canals (711 teeth) were treated. Three instruments (two 21.06 and one 25.08) separated during use and were deemed to be irretrievable. The overall instrument separation incidence in relation to the number of canals shaped was found to be 0.13% (0.42% teeth). CONCLUSIONS: Based on the results of this study, the incidence of endodontic instrument separation when using the WaveOne reciprocating file was considerably low.

Assessment of convergence angle of full-coverage porcelain fused to metal crowns in clinical practice.

BACKGROUND: Full-coverage porcelain fused to metal crowns is commonly recommended for restoration of extensively damaged teeth. Ability of the dentist to adequately prepare teeth is fundamental to success and longevity of these restorations. AIMS: This study was designed to compare recommended convergence angle and taper values of tooth preparation with clinically practiced values and to assess the factors such as tooth position, operator experience, vitality, and restorative status on convergence angle of prepared teeth. SETTING AND DESIGN: It was a descriptive, cross-sectional study design and held at The Aga Khan University Hospital, Dental Section, for a period of 1 year. MATERIALS AND METHODS: A minimum of 197 crown preparation models of molar and premolar teeth prepared by residents and specialists were collected in order to achieve the objectives of the study on the basis of convenient sampling technique. STATISTICAL ANALYSIS: One sample t-test used to compare the mean practiced convergence angle values with its recommended values. Independent sample t-test and one-way ANOVA was used to see difference in the convergence angle values of the teeth prepared by different operators, tooth type, vitality status, and restorative status of teeth. RESULTS: Mean reported convergence angle and axial wall taper values were 23.7° ± 8.9° and 11.3° ± 7.8°, respectively, which is significantly greater (P<0.001) than the recommended values. Convergence angle values were greater for molars as compared to premolars. CONCLUSION: There was a considerable disparity between the convergent angles values recorded in this study and the recommended guidelines and are affected by tooth type, vitality, and restorative status of tooth.

Computed tomographic assessment of maxillary sinus wall thickness in edentulous patients.

Posterior maxillary region is considered to be the most challenging area for dental implant placement. Lateral window opening is the gold standard procedure for maxillary sinus augmentation in this area. The purpose of this study is to evaluate lateral wall thickness of the maxillary sinus for sinus augmentation using computed tomography (CT) in edentulous patients. Computed tomography images of 302 patients were analysed. Using the maxillary sinus floor as the reference point in edentulous regions, lateral wall thickness was measured on CT scans. After drawing a tangent line at the lowest point of the sinus floor, another perpendicular line to the tangent line was drawn at the same point of the sinus floor. Thickness of the lateral wall of the maxillary sinus was measured using 10DR implant software at 3 (R1), 10 (R2) and 15 mm (R3) from the sinus floor. The mean thickness of the lateral wall of the maxillary sinus from the first premolar to second molar was 1·69 ± 0·71, 1·50 ± 0·72, 1·77 ± 0·78 and 1·89 ± 0·85 mm, respectively. The thickness differed significantly at the R2 and R3 points. Women had thinner lateral walls at the R1 and R2 points at the premolars than did men. At the R2 and R3 points at the second premolar, the mean thickness of smokers was larger than that of non-smokers. There were no significant differences on age or reasons for tooth loss. The changes in the thickness of the lateral wall at different reference points were observed, and CT examinations may help make lateral window without membrane perforation.

Non-destructive assessment of cavity wall adaptation of class V composite restoration using swept-source optical coherence tomography.

The purpose of this study was to evaluate gap formations under class V restoration using swept-source optical coherence tomography (SS-OCT). Wedge-shaped cavities were prepared on the buccal surface of 40 extracted premolar teeth at 2 locations; 1) cemento-enamel junction (CEJ) with enamel and cementum margin and 2) root surfaces with cementum margin. The cavity was treated with Clearfil S(3) Bond, restored with Clearfil Majesty and polished with abrasive disks. The specimens were kept in water at 37°C for 24 hours and subjected to a thermocycling procedure. Gap formations at the tooth-restoration interface were measured with SS-OCT image and conventional dye leakage under a microscope. There was no effect of the locations of the cavity and the margins of the cavity on the gap formation. Therefore, a significant effect of the observational methods was observed. The gap formation was 0.89±0.48 mm with the SS-OCT, and the gap formation was 0.34±0.41 mm with the dye leakage. The observation with SS-OCT demonstrated a greater degree of gap formation than the observation with dye leakage.

Attitudes, knowledge and utilization of fissure sealants among Greek dentists: a national survey.

AIM: This was to evaluate the attitudes and knowledge of Greek Dentists concerning fissure sealants (FS) and other preventive measurements, together with the extent and the reasons for using or not using FS in their clinical practice. METHODS: 1,221 general dental practitioners (GDPs) including 50 Paediatric Dentists (PD) were randomly selected from 35 local dental societies of Greece and asked to answer a telephone questionnaire regarding their attitudes to prevention, use of FS and variables influencing their placement. Non parametric Pearson's Chi square test and multifactorial logistic regression models were used for analysing the data. RESULTS: Although 87.6% of all Greek dentists believe and apply prevention, only 35.8% are using them routinely. Factors highly correlated with FS usage for all dentists were using fluoride regimens (p<0.001), being in practice for 5-14 years (p=0.004) and practicing in urban areas (p<0.001). By contrast, all PD were using FS, regardless of any parameter (p>0.01). Concerning the type of surfaces sealed, 45.6% of GDP used FS on intact surfaces and 41.1% on questionable, while only 15% of them sealed incipient caries. Overall, fewer GDPs compared with PD sealed premolars, primary teeth, questionable surfaces, incipient enamel caries and molars in high risk patients (p<0.001), while fewer PD sealed intact surfaces (p<0.001). The reasons mentioned for not using FS were: 76.3% that parents were unwilling to pay, 61.9% did not know how to use them, while 43.0% believed that oral hygiene was sufficient in order to reduce caries. CONCLUSIONS: Insufficient knowledge and lack of clinical practice guidelines for the use of FS by GDPs in Greece, leads to low usage rates. Appropriate professional and scientific authorities should join efforts to improve knowledge of GDP and instil confidence in using FS.

Assessment of root canal morphology of mandibular first premolars in the Indian population using spiral computed tomography: an in vitro study.

AIM: The aim of the study is to determine the root canal morphology of the mandibular first premolar teeth in an Indian population using spiral computed tomography (SCT). MATERIALS AND METHODS: One hundred extracted mandibular first premolars were observed using Spiral Computed Tomography for the (i) Pattern of root canal (ii) Tooth length (iii) Position of the bifurcation of the canal (iv) Invagination of the root (v) Root thickness. The root canal morphology was classified based on Vertucci's classification. RESULTS: Eighty percent of the teeth had a single canal, 11% of the teeth had two canals, and C-shaped canals were found in 2% of the teeth, in this study. The average length of the teeth was 21.6 mm. Fourteen percent of the teeth had mesial invagination of the root. CONCLUSION: The Type I root canal morphology was the most common type of root canal system in the mandibular first premolars among the Indian population in this study.

The orthodontic-restorative interface: 2. Compensating for variations in tooth number and shape.

UNLABELLED: The aim of this second article in this series of two is to outline a variety of methods which may be used to compensate for variations in tooth shape and number using a combination of orthodontic and restorative approaches. It will also provide an overview of other areas of patient care which necessitate a multi-disciplinary orthodontic/restorative approach. The article will highlight the importance of combined planning from the outset and the close relationship between the different specialties, which must be maintained throughout treatment. The methods of compensating for variations in tooth number and shape will often require contributions from both orthodontist and restorative dentist. It is important that both disciplines are involved in the assessment and treatment planning process so that they know what will be expected of them during the patient's care. Treatment planning in isolation may lead to care being delivered which is below the optimum standard which can be achieved. The orthodontist and restorative dentist are likely to liaise with the patient's general dental practitioner so that he/she can provide the restorative treatment in some cases. CLINICAL RELEVANCE: Great improvements in aesthetics and function may be obtained using an interdisciplinary approach for patients who have variations in tooth number and shape.

Near-end of treatment panoramic radiograph in the assessment of mesiodistal root angulation.

OBJECTIVES: To test the hypothesis that there is no difference between the actual mesiodistal root angulation and the mesiodistal root angulation as measured on the panoramic radiograph. MATERIALS AND METHODS: A typodont dentition was set up into a Class I occlusion. Wire struts were placed on the buccal surface of each tooth to represent their long axes. The dentition was fixed into a natural skull for imaging. The radiographic and true mesiodistal angulation of each tooth to a horizontal reference plane (the arch wire) was measured using a coordinate measuring machine (CMM). The mesiodistal root positions were then altered to a more mesial and then more distal position and the measurements were repeated. RESULTS: Only 26.7% of the radiographic root angulations were within the clinically acceptable angular variation range of +/-2.5 degrees . The greatest variation in the upper arch occurred in the canine-premolar area where the roots were projected as being more divergent. The greatest variation in the lower arch occurred in the lateral incisor-canine region where these roots were projected as being more convergent. The extent of radiographic distortion is statistically greater in the lower arch than in the upper arch in the ideal (P < or = .05) and distal (P < or = .01) root positions. CONCLUSIONS: The hypothesis is rejected. There is a clinically significant variation between the radiographic and the true root angulations recorded. Caution is advised when interpreting mesiodistal root angulation using this radiograph.

Are dental indexes useful in sex assessment?

This study describes sexual dimorphism in dental indexes derived from the permanent dentition. Three dental indices--'crown area,' 'crown module' and 'crown index'--were calculated from the buccolingual (BL) and mesiodistal (MD) measurements of 123 permanent dentitions (58 females and 65 males) belonging to young Nepalese adults (age-range 19-28 years). Sex differences in the dental indexes were assessed using univariate and multivariate statistics and compared to that of linear measurements reported previously on the same sample. Univariate sex dimorphism exhibited by crown area and crown module was similar to that of linear measurements whereas crown index displayed marked variation. The unusual results shown by the latter is explained as the result of it not being a representation of tooth size per se; rather, crown index is an expression of the difference between BL and MD dimensions and may be better suited as an indicator of tooth 'shape'. Stepwise discriminant analyses undertaken for the indices gave moderate to high accuracy rates in sexing (69.8-81.1%). However, this is lower to the classification accuracy reported for linear measurements. Therefore, it is concluded that dental indexes have no added utility in forensic sex assessment.