In vitro remineralization assessment of enamel subsurface lesions using different percentages of surface reaction-type pre-reacted glass-ionomer containing gum-based material.

OBJECTIVE: To identify the remineralization activity of enamel subsurface lesions using different percentages of surface pre-reacted glass-ionomer (S-PRG) filler containing gum-base material. METHODS: Gum extracts from gum-base materials containing 0wt%, 5wt%, and 10wt% S-PRG filler were prepared as GE0, GE5, and GE10, respectively. A total of 50 bovine enamel specimens were used, and the polished enamel surface of a 3 × 3 mm2 window area was exposed. The specimens were then subjected to a demineralization solution for seven days to create a subsurface enamel lesion. Remineralization was then conducted for seven days using a protocol whereby the specimens were immersed three times a day in prepared gum extracts (0wt%, 5wt%, and 10wt%) and artificial saliva of pH 7 (Control) for 20 min at 37 °C. Thereafter, remineralization assessment was performed by using Swept Source Optical Coherence Tomography (SS-OCT) and micro-computed tomography (µCT). Surface morphology and elemental analysis were conducted by scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDS). RESULTS: The depths of the demineralized lesions in the GE5 and GE10 groups were significantly lower than those of the Control and the GE0 groups. SEM observations of the enamel surface morphology of the GE5 and GE10 groups indicated remineralization with S-PRG filler-related elements present. CONCLUSION: The GE5 and GE10 S-PRG filler containing gum-base materials showed significantly improved surface remineralization and reduced demineralization of the enamel lesions. EDS analysis suggested that the released ions from the S-PRG filler might be responsible for surface remineralization. CLINICAL SIGNIFICANCE: The S-PRG filler containing gum-base material may have a significant remineralization effect and improve the surface morphology of enamel subsurface lesions.

High Contrast Reflectance Imaging of Enamel Demineralization and Remineralization at 1950-nm for the Assessment of Lesion Activity.

BACKGROUND AND OBJECTIVES: Previous studies have shown that large changes in the diffuse reflectivity of caries lesions during drying with air can be used to assess lesion activity. The largest changes occur at short wavelength infrared (SWIR) wavelengths coincident with high water absorption. The strongest water absorption in the SWIR occurs at 1950 nm. In this study changes in the reflectivity of simulated lesions with varying degrees of remineralization was measured at 1500-2340 nm and at 1950 nm as the samples were dried with air. STUDY DESIGN/MATERIALS AND METHODS: Twenty bovine enamel surfaces each with five treatment windows were exposed to two demineralization/remineralization regimens to produce simulated lesions of varying depth, severity, and mineral gradients. An extended range tungsten-halogen lamp with a long pass filter (1500-2340 nm) and a broadband amplified spontaneous emission source centered near the peak of the water-absorption band at 1950-nm were used as light sources and an extended range InGaAs camera (1000-2340 nm) was used to acquire reflected light images as the samples were dried with air. Lesions were also assessed using digital microscopy, polarized light microscopy, optical coherence tomography, and transverse microradiography. RESULTS: Both wavelength ranges showed extremely high lesion contrast (>0.9) for all six lesion treatment windows in both models. The change in contrast (ΔI) was significantly higher for the 1950 nm broadband source for all the intact lesion windows compared with the 1500-2340 nm wavelength range. CONCLUSION: SWIR light at 1950 nm yields extremely high contrast of demineralization and appears to be the optimum wavelength for the assessment of lesion activity on tooth coronal surfaces. Lasers Surg. Med. 00:00-00, 2020. © 2020 Wiley Periodicals LLC.

Impact of early biofilm on the assessment of initial enamel erosion with swept-source optical coherence tomography.

Objective: This study examined the impact of early biofilm on the tooth surface, during the assessment of initial enamel erosion using swept-source optical coherence tomography (SS-OCT). Method and materials: Forty-five enamel windows of 2 × 4 mm2 were prepared on 23 extracted human teeth. The specimens were exposed to citric acid (pH 3.2) for 30 minutes and randomly divided into three groups (n = 15): Group 1, no biofilm; Group 2, 1-day-old biofilm; and Group 3, 3-day-old biofilm. Specimens in Groups 2 and 3 were inoculated with oral bacteria (Streptococcus sanguinis, Streptococcus mitis, and Actinomyces naeslundii) to produce early laboratory-cultivated biofilms for 1 and 3 days respectively. Surface microhardness (SMH) measurements were taken at pre- (t1) and post-erosion (t2); and SS-OCT scans were done at t1, t2, and post-biofilm cultivation (t3). Integrated reflectivity (IR) of the tooth-air interface (IRsurface) and enamel (IRenamel) were computed from the mean A-scans. Statistical analysis was performed using paired t tests and one-way ANOVA (α = .05). Results: A significant increase in IRenamel was observed at t2 (P < .05). At t3, IRsurface between Group 1 (control) and Group 2 (P = .012) as well as Group 3 (P = .001) were significantly different. Significant variances in IRenamel were perceived between t2 and t3 for Groups 2 and 3 but not for Group 1. Conclusion: As early biofilm affected SS-OCT assessment of initial enamel erosion, they should be removed from the tooth surface prior to OCT procedures..

The effect of base material composition on demineralization assessment in CPOCT dental imaging.

Cross-polarization optical coherence tomography (CP-OCT) is a promising imaging modality to detect demineralization under the margins of composite restorations. The aim of this study was to assess how base materials applied under composite resin may affect CP-OCT image assessment. Base materials are commonly used for managing deep dentinal decay but once applied residual amounts of the base materials can be inadvertently left on the inner enamel walls. This study determined that base materials have significantly different scattering properties. The order grouping in the mean backscattered reflectivity (mR) of the base material was Dycal>caries phantom>Fuji IX, Vitrebond, Fuji II (p<0.05). The calcium hydroxide base (Dycal) had a higher mR than demineralized dentin and Vitrebond before and after the resin restoration was placed (p<0.05). While calcium hydroxide maybe a confounder in CPOCT imaging, several protective base materials are compatible with this type of imaging modality.

Assessment of root caries under wet and dry conditions using swept-source optical coherence tomography (SS-OCT).

The purpose of this study was to compare optical properties of root caries under two observing conditions using swept-source optical coherence tomography (SS-OCT). In vitro and natural root caries were observed by SS-OCT under wet and dry conditions, followed by confocal laser scanning microscope (CLSM) and transverse microradiography (TMR). Signal intensity (SI), distance between SI peaks (SI-distance) and optical lesion depth were obtained from OCT. Lesion depth was measured from CLSM; lesion depth (LDTMR) and mineral loss (ML) were obtained from TMR. In vitro root caries under wet and dry conditions showed different OCT images and SI patterns. Lesion depth of OCT and that of CLSM, SI-distance and LDTMR, LDTMR and ML significantly correlated. Under dry conditions, half natural root caries showed similar OCT images and SI patterns as in vitro root caries. The base of demineralized dentin could be detected more clearly under dry conditions than under wet conditions.

Micro-computed tomography assessment of root dentin around fluoride-releasing restorations after demineralization/remineralization.

Using micro-computed tomography (micro-CT), this study assessed the inhibitory effect of three different types of restorations on root-caries formation under a cariogenic challenge. Bovine-root dentin blocks with a cylindrical cavity were divided into three restoration groups: a fluoride-free self-etch adhesive and a resin composite (SE-ES); a self-etch adhesive and a resin composite with multi-ion release (FL-BF); and a glass ionomer cement (Fuji-VII). After the restorative procedures, the specimens were stored in artificial saliva for 1 d, then subjected to a demineralization solution for 4 d and a remineralization solution for 28 d. Mineral density and mean mineral loss of dentin around the restorations were measured using micro-CT. The mean mineral loss values of dentin around the restorations were highest among SE-ES restorations and lowest among Fuji-VII restorations. Fuji-VII showed the highest mineral density and the lowest mineral loss after 28 d of remineralization. The observations made by scanning electron microscopy demonstrated that Fuji-VII created the smallest outer lesion followed by FL-BF and SE-ES. Fuji-VII has a larger inhibitory effect on root caries around the restorations and enhances remineralization more effectively than either FL-BF or SE-ES. Multi-ion and fluoride release from the restorative materials may be beneficial for inhibition of root-dentin caries around the restorations.

Effect of hydration on assessment of early enamel lesion using swept-source optical coherence tomography.

Establishing reproducible methodologies for assessment of early enamel lesions using optical coherence tomography (OCT) appears to be challenging. This in vitro study longitudinally evaluated the subsurface enamel lesion progression after 3, 9 and 15 days by cross-sectional scanning using 1310 nm centered swept-source OCT (SS-OCT) under hydrated and dry conditions. The positive difference between the depth-integrated OCT signals at dry and hydrated conditions were calculated and adopted as dehydration parameter (DH). A linear regression was found between DH and the square root of demineralization time (R(2) = 0.99). Significant differences were found in DH between sound and demineralized enamel, and between different periods of demineralization (p < 0.001). Hydration state affects the reflectivity of demineralized porous enamel, and the effect can be potentially used for assessment of early enamel lesion using OCT.

Accuracy and reproducibility of conventional radiographic assessment and subtraction radiography in detecting demineralization in occlusal surfaces.

Subjective interpretation of paired digital radiographic images viewed side by side to assess occlusal lesion progression, arrest or remineralization is difficult. The aim of this study was to compare the accuracy and reproducibility of a digital subtraction radiography technique and visual assessment of paired digital images in detecting changes in mineral content within occlusal cavities. Forty molar teeth with occlusal cavities were placed in arches and baseline digital radiographs taken. Nineteen teeth were randomly selected and had acid placed in the cavities and digital images taken after 3, 6, 12, 18 and 24 h of acid exposure. Paired baseline images and those taken at the various time intervals were examined side by side and assessed for demineralization by five examiners. Subtraction images prepared from the paired images were assessed in the same way. One fifth of the images were re-examined to determine intra-examiner reproducibility. After 12 h or longer the diagnostic accuracy (mean area under the ROC curve = 0.92-0.98 for subtraction radiography), intra-examiner and inter-examiner reproducibility for detection of demineralization from the subtraction images was significantly better than viewing the paired images side by side (p < 0.01). The subtraction radiography system used was found to be more accurate and reproducible than visual assessment of paired digital images. As such the technique shows promise for monitoring occlusal lesion progression in clinical studies.

Assessment of enamel demineralization using conventional, digital, and digitized radiography.

This experimental research aimed at evaluating the accuracy of enamel demineralization detection using conventional, digital, and digitized radiographs, as well as to compare radiographs and logarithmically contrast-enhanced subtraction images. Enamel subsurface demineralization was induced on one of the approximal surfaces of 49 sound third molars. Standardized radiographs of the teeth were taken prior to and after the demineralization phase with three digital systems--CygnusRay MPS, DenOptix and DIGORA--and InSight film. Three radiologists interpreted the pairs of conventional, digital, and digitized radiographs in two different occasions. Logarithmically contrast-enhanced subtraction images were examined by a fourth radiologist only once. Radiographic diagnosis was validated by cross-sectional microhardness profiling in the test areas of the approximal surfaces. Accuracy was estimated by Receiver Operating Characteristic (ROC) analysis. Chi-square test, at a significance level of 5%, was used to compare the areas under the ROC curves (A(z)) calculated for the different imaging modalities. Concerning the radiographs, the DenOptix system (A(z) = 0.91) and conventional radiographs (A(z) = 0.90) presented the highest accuracy values compared with the other three radiographic modalities. However, logarithmically contrast-enhanced subtraction images (A(z) = 0.98) were significantly more accurate than conventional, digital, and digitized radiographs (p = 0.0000). It can be concluded that the DenOptix system and conventional radiographs provide better performance for diagnosing enamel subsurface demineralization. Logarithmic subtraction significantly improves radiographic detection.

Comparison of calcium/phosphorus analysis, longitudinal microradiography and profilometry for the quantitative assessment of erosive demineralisation.

The study is a comparison of methods for the quantitative measurement of erosive mineral loss including longitudinal microradiography (LMR), profilometry (PM), and analysis of calcium (CA) and phosphorus (PA) in the erosion solution. Polished human enamel samples were taped, covered with nail varnish and the edges of the resulting enamel window marked with drilled holes as a reference. All samples were subjected to baseline LMR. Sixty samples each were eroded with citric acid (0.05 M; pH 2.3; 10 ml per sample) for 30, 60, 90, or 120 min. Erosive loss of each sample was estimated by the four methods. All methods revealed a linear erosive loss over time and showed good linear correlation. Values calculated from PM and LMR were both approximately 20% lower than those from CA and PA. After 30 min erosion, LMR showed no significant correlation with the other three methods. With LMR, erosive loss below 20 microm should be interpreted with care.

An in vitro assessment using transverse microradiography of the effect on mineral loss of etching enamel for in situ studies.

OBJECTIVES: To test the hypothesis that etching enamel with 37% phosphoric acid for 30 s does not lead to detectable mineral loss when measured with transverse microradiography (TMR). DESIGN: An in vitro laboratory investigation. EXPERIMENTAL VARIABLE: Forty bovine incisors were used in the experiment. The crowns of the teeth were covered with acid resistant varnish except for a rectangular area on the labial surface approximately 10 x 12 mm. On the exposed labial surface of 20 teeth an enamel lesion similar to that used in the in situ caries model was induced. Twenty teeth were left without a lesion. The exposed area was divided into three areas of equal size. The control area (C) was covered with acid resistant varnish throughout the experiment. The first experimental area (E1) was etched with 37% phosphoric acid for 30 s and a simulated bracket was bonded to the surface with composite resin. The second experimental area (E2) was left exposed for the remainder of the experiment. The teeth were placed in a demineralizing solution for 24, 48, 72 or 96 h to replicate different cariogenic challenges. OUTCOME MEASURE: Mineral loss as measured with TMR. RESULTS: There were no significant differences in the mineral loss between etched (E1) and etched (C) areas of enamel. There were significant differences in mineral loss between E1 and E2 for the 48 h (p < 0.001) and 72 h (p = 0.001) exposures without a pre-formed enamel lesion. CONCLUSION: There is no detectable mineral loss with TMR when enamel has been etched for 37% phosphoric acid for 30 s. The use of in situ enamel specimens with acid etch retained simulated brackets to investigate demineralization during orthodontics will not significantly affect the outcome compared with unetched specimens.

Reproducibility and accuracy of three methods for assessment of demineralization depth of the occlusal surface: an in vitro examination.

This laboratory study of 100 occlusal surfaces investigated the reproducibility and accuracy of a visual ranked caries scoring system, an electronic caries scoring system (ECM) using a continuous conductance scale, and a radiographic ranked caries scoring system. Histological examination of the teeth served as a gold standard to validate the ability of each system to assess lesion depth and predict softened, demineralized dentine. After training, 3 examiners carried out each scoring system on two separate occasions. Kappa values for visual, ECM and radiographic ranked scoring systems showed good inter- and intra-examiner reproducibility levels and acceptable limits of agreement for ECM readings. When scoring systems were tabulated against histological scores there was a high correlation between the visual and ECM methods and lesion depth in both enamel and dentine, but radiographic examination could not detect enamel caries. When compared to the histological scoring, the Spearman correlation coefficients for the visual scoring ranged between 0.87 and 0.93, for the ECM between 0.80 and 0.85 and for the radiographic scoring system between 0.76 and 0.78. No tooth scored as visually sound had histological evidence of dentine caries. Soft dentine corresponded to demineralization involving the middle third of the dentine or more which was related to visual cavity formation or an ECM reading above 9 (score 3 or 4). The radiograph was an excellent predictor of soft dentine. In conclusion, the new visual system appears promising, but takes time to learn. The reproducibility and accuracy for the ECM is acceptable while radiographs miss early occlusal lesions.

Comparison of laser fluorescence and longitudinal microradiography for quantitative assessment of in vitro enamel caries.

A new quantitative, non-destructive method using laser-induced fluorescence (LAF) was compared with longitudinal microradiography (LMR) for assessment of mineral changes in enamel slices using an in vitro caries model. Ten enamel slices, cut longitudinally from sound natural smooth surfaces of human teeth, were exposed to de- and remineralization in a pH-cycling model. The enamel slices were subjected to LAF and LMR measurements before and at 2, 4, 7, and 9 days of demineralization. For LAF, the average fluorescence radiance decreased during the demineralization period with 11% by day 2 and 49% by day 9. For LMR, the corresponding average loss of mineral content changed with 0.01 and 0.10 kg.m-2 over the same time period. The mineral losses in each individual enamel slice measured with the two techniques were strongly correlated, r = 0.97. The Spearman rank correlation coefficient for all LAF and LMR demineralization results was 0.86. The precision (coefficient of variation) for LAF was 3.1%, corresponding to 0.005 kg.m-2, and the repeatability error for LMR was 0.02 kg.m-2, indicating a lower discrimination threshold for LAF compared to LMR. It was concluded that the new, sensitive, non-destructive LAF method provides possibilities for further improvement in the quantification of initial caries lesions in natural smooth enamel surfaces for use in in vitro studies. Furthermore, it offers potential in in situ caries studies as well as a tool in the diagnosis of early enamel caries in vivo.