Electrochemical degradation of diclofenac generates unexpected thyroidogenic transformation products: Implications for environmental risk assessment.

Diclofenac (DCF) is an environmentally persistent, nonsteroidal anti-inflammatory drug (NSAID) with thyroid disrupting properties. Electrochemical advanced oxidation processes (eAOPs) can efficiently remove NSAIDs from wastewater. However, eAOPs can generate transformation products (TPs) with unknown chemical and biological characteristics. In this study, DCF was electrochemically degraded using a boron-doped diamond anode. Ultra-high performance liquid chromatography coupled with high-resolution mass spectrometry was used to analyze the TPs of DCF and elucidate its potential degradation pathways. The biological impact of DCF and its TPs was evaluated using the Xenopus Eleutheroembryo Thyroid Assay, employing a transgenic amphibian model to assess thyroid axis activity. As DCF degradation progressed, in vivo thyroid activity transitioned from anti-thyroid in non-treated samples to pro-thyroid in intermediately treated samples, implying the emergence of thyroid-active TPs with distinct modes of action compared to DCF. Molecular docking analysis revealed that certain TPs bind to the thyroid receptor, potentially triggering thyroid hormone-like responses. Moreover, acute toxicity occurred in intermediately degraded samples, indicating the generation of TPs exhibiting higher toxicity than DCF. Both acute toxicity and thyroid effects were mitigated with a prolonged degradation time. This study highlights the importance of integrating in vivo bioassays in the environmental risk assessment of novel degradation processes.

Removal of diclofenac by a local bacterial consortium: UHPLC-ESI-MS/MS analysis of metabolites and ecotoxicity assessment.

Diclofenac (DCF) belongs to the class of nonsteroidal anti-inflammatory drugs, which is one of the most consumed by population and detected in raw sewage. Several studies have reported variable removal rates by biodegradation of diclofenac in wastewater treatment plants (WWTPs). This study deals with the evaluation of the biodegradation of DCF by a bacterial consortium (obtained from pure cultures of Enterobacter hormaechei D15 and Enterobacter cloacea D16), which were isolated from household compost and Algerian WWTP, respectively, as sole carbon source and by co-metabolism, using glucose as carbon source. A 98% removal rate of DCF was observed when it is used as the sole carbon source, whilst only 44% of DCF was removed in co-metabolic conditions. Two metabolites were identified using ultra-high-performance liquid chromatography coupled to electrospray injection tandem mass spectrometry analysis (UHPLC-ESI-MS/MS); one of them was identified as 4'-hydroxy-DCF, and the second metabolite was suspected to be a nitro derivative of DCF, according to comparison with the literature. Biodegradation of DCF by this bacterial consortium generates relatively safe final by-products.

Pharmacokinetics and bioequivalence assessment of optimized directly compressible Aceclofenac (100 mg) tablet formulation in healthy human subjects.

The aim of the study was to determine the various pharmacokinetic parameters of the newly developed cost-effective aceclofenac 100 mg tablet formulation (F-15) and to establish the bioequivalence against the marketed brand (ACEMED). Both products (test and reference) were given to 12 healthy non-smokers male subjects with overnight fasting of >10hr. The study was a randomized, single-dose, open-label, two sequence, and two treatment crossover design, with a washout period of 2 weeks. Blood samples (5 mL) from the human subjects were collected before (0 hr) and after drug administration at 13different time points (0.5, 1, 1.5, 2, 2.5, 3, 3.5, 4, 5, 6, 8, 12 and 18 hrs). The drug plasma concentration was analyzed by a validated RP-HPLC method using a solvent system containing acetonitrile and deionized water (60:40% v/v). Linearity was found to be 0.999 over the drug concentration range of 50µg/mL to 0.05µg/mL with LLOQ and LOD of 0.05µg/mL and 0.025µg/mL respectively. Non-compartmental pharmacokinetic analysis was performed using Kinetica® (ver. 5.1) software. Using the log-transformed data Cmax, AUC0-t, AUC0-∞, AUMCtot, and MRT were calculated. The Cmax of the test and brand was found to be 8.629±1.251µg/mL and 8.478±0.913µg/mL. The AUC0-t and AUC0-∞ of the test and the reference were computed to be 20.890 ±2.2021µg/mL.h, 23.272 ±1.914 µg/mL.h and 19.850 ±2.911 µg/mL.h, 22.890 ± 2.110 µg/mL.h correspondingly. Two-way analysis of variance (ANOVA) test and two one-sided t-test (p>0.05; non-significant) were applied to assess the variation in the period, sequence, subjects, and treatment. Geometric mean ratios for above mentioned pharmacokinetic parameters of reference/test were found within the acceptable FDA limits of 80-125% using 90% CI. There was no inter and intrasubject variation (p> 0.05) that was observed. Therefore, the directly compressible aceclofenac (100 mg) test formulation and the commercial reference tablets were declared to be biosimilar.

Quality Risk Management and Quality by Design for the Development of Diclofenac Sodium Intra-articular Gelatin Microspheres.

The aim of the present study was to evaluate the development of an intra-articular nonsteroidal anti-inflammatory drug gelatin microsphere formulation based on quality risk management and quality by design approaches. Specifically, after setting the quality target product profile and the critical quality attributes, risk assessment was performed by constructing Ishikawa fishbone diagrams based on preliminary hazard analysis. A Plackett-Burman screening experimental design was applied in order to identify the factors (previously classified by risk assessment analysis as having high risk of failure) having a statistically significant impact on the formation of gelatin microspheres. Particle size, polydispersity index, and drug loading were used as responses, while diclofenac sodium was selected as a model drug. All drug-loaded gelatin microspheres were prepared by emulsion-crosslinking process. Screening results showed that gelatin type, surfactant type and quantity, oil phase type, emulsification speed, and glutaraldehyde's concentration had a statistically significant impact on microsphere's final and intermediate critical quality attributes. A design space was then constructed based on central composite design overlaying contour plots, while verification experiments for the optimum suggested formulation (derived from a set control strategy) showed good agreement between the predicted and the experimentally observed results. In addition, the physicochemical characterization of the optimum formulation showed the formation of significant molecular interactions between the drug and the gelatin matrix, leading to the complete amorphization of diclofenac within the microsphere structure, while dissolution release experiments showed a biphasic release profile which extended the drug's release for up to 30 days, governed by a Fickian diffusion release mechanism.

Portable and low-cost biosensor towards on-site detection of diclofenac in wastewater.

Wastewater treatment plants are the main release sources of pharmaceutical compounds present in surface waters. Even at low concentrations, many of these substances have long-term adverse effects on the environment. For an efficient control of pharmaceutical removal, a real-time recognition is a prerequisite. Currently, quantification of such compounds is done in special equipped laboratories and is rather time-consuming and expensive. Here, we introduce a novel biosensor for the detection of the pharmaceutical compound diclofenac, which can be produced with low costs, is easy in handling and can be applied directly on-site. Recognition of diclofenac is based on genetically engineered yeast cells which produce green fluorescent protein in a diclofenac concentration-dependent manner. Centerpiece of the sensor is a foil-based microfluidic flow cell, which allows supply with nutrient solution and analyte while preventing loss of reporter cells. Readout of data is accomplished by a newly developed spectrometric detection unit. With this device, we are able to determine diclofenac concentrations in a range from 10 to 50 µM.

Development of a multi-residue analysis of diclofenac and some transformation products in bivalves using QuEChERS extraction and liquid chromatography-tandem mass spectrometry. Application to samples from mesocosm studies.

Pharmaceuticals are ubiquitously present in the aquatic environment, mainly due to insufficient removal in wastewater treatment plants. Although these compounds are often found at trace levels in waters, long-term exposure can have negative impacts on biotic communities due to their inherent biological activity. The non-steroidal anti-inflammatory drug diclofenac (DCF) is one of the most frequently detected human pharmaceuticals in water and has recently been included in the "watch" list of the European Union. However little data are available on the detection of this substance and its transformation products in aquatic organisms. In this context, an analytical methodology has been developed to quantify traces of DCF along with its biotic and abiotic transformation products in a wild species of bivalve, the zebra mussel Dreissena polymorpha. A modified QuEChERS extraction was implemented on a small quantity of soft bivalve tissue (100mg). This was followed by liquid chromatography coupled to tandem-mass spectrometry (LC-MS/MS) with electrospray ionization in positive mode (ESI+). Whole analytical method was validated on spiked real samples, with regard to linearity (from 1 to 50 or 100ng/g depending on the target compounds, R(2)>0.99), intra-day precision (relative standard deviation (RSD)<18%), inter-day precision (RSD <25%), (recoveries 78-117%), and limits of detection and of quantification (both inferior or equal to 1ng/g). The optimized method was successfully applied to organisms collected from mesocosm experiments. Bioconcentration factors comprised between 4 and 13 were observed for DCF in the zebra mussels. To the best of our knowledge, the product 2-indolone was for the first time detected in bivalves, with levels up to 6ng/g.

Efficacy and Safety Profile of Diclofenac/Cyclodextrin and Progesterone/Cyclodextrin Formulations: A Review of the Literature Data.

BACKGROUND: According to health technology assessment, patients deserve the best medicine. The development of drugs associated with solubility enhancers, such as cyclodextrins, represents a measure taken in order to improve the management of patients. Different drugs, such as estradiol, testosterone, dexamethasone, opioids, non-steroidal anti-inflammatories (NSAIDs; i.e. diclofenac), and progesterone are associated with cyclodextrins. Products containing the association of diclofenac/cyclodextrins are available for subcutaneous, intramuscular, and intravenous administration in doses that range from 25 to 75 mg. Medicinal products containing the association of progesterone/cyclodextrins are indicated for intramuscular and subcutaneous injection at a dose equal to 25 mg. OBJECTIVES AND METHODS: The effects of cyclodextrins have been discussed in the solubility profile and permeability through biological membranes of drug molecules. A literature search was performed in order to give an overview of the pharmacokinetic characteristics, and efficacy and safety profiles of diclofenac/hydroxypropyl-ß-cyclodextrin (HPßCD) and progesterone/HPßCD associations. RESULTS: The results of more than 20 clinical studies were reviewed. It was suggested that the new diclofenac/HPßCD formulation gives a rapid and effective response to acute pain and, furthermore, has pharmacokinetic and efficacy/safety profiles comparable to other medicinal products not containing cyclodextrins. One of the principal aspects of these new diclofenac formulations is that in lowering the dose (lower than 50 mg) the drugs could be more tolerable, especially in patients with comorbid conditions. Moreover, results of studies investigating the characteristics of progesterone and cyclodextrins showed that the new formulation (progesterone/HPßCD 25 mg solution) has the same bioavailability as other products containing progesterone. It is more rapidly absorbed and allows the achievement of peak plasma concentrations in a shorter time. Finally, the new formulation of progesterone was shown to be safe and not inferior to other products already on the market, with the exception of progesterone administered vaginally. CONCLUSIONS: As shown by the results of clinical studies presented in this review, the newly approved medicines containing cyclodextrins have been found to be as effective and as well-tolerated as other medicinal products that do not contain cyclodextrins. Moreover, the newly approved lower dose of diclofenac associated with cyclodextrins is consistent with the European Medicines Agency recommendations reported in the revision of the Assessment Report for Non-Steroidal Anti-Inflammatory Drugs (NSAIDs) and Cardiovascular Risk. Finally, the use of cyclodextrins led to significant increases in solubility and bioavailability of drugs, such as diclofenac and progesterone, and improvement in the efficacy and safety of these drugs.

Effects of gastric pH on oral drug absorption: In vitro assessment using a dissolution/permeation system reflecting the gastric dissolution process.

The aim of the present study was to evaluate the effects of gastric pH on the oral absorption of poorly water-soluble drugs using an in vitro system. A dissolution/permeation system (D/P system) equipped with a Caco-2 cell monolayer was used as the in vitro system to evaluate oral drug absorption, while a small vessel filled with simulated gastric fluid (SGF) was used to reflect the gastric dissolution phase. After applying drugs in their solid forms to SGF, SGF solution containing a 1/100 clinical dose of each drug was mixed with the apical solution of the D/P system, which was changed to fasted state-simulated intestinal fluid. Dissolved and permeated amounts on applied amount of drugs were then monitored for 2h. Similar experiments were performed using the same drugs, but without the gastric phase. Oral absorption with or without the gastric phase was predicted in humans based on the amount of the drug that permeated in the D/P system, assuming that the system without the gastric phase reflected human absorption with an elevated gastric pH. The dissolved amounts of basic drugs with poor water solubility, namely albendazole, dipyridamole, and ketoconazole, in the apical solution and their permeation across a Caco-2 cell monolayer were significantly enhanced when the gastric dissolution process was reflected due to the physicochemical properties of basic drugs. These amounts resulted in the prediction of higher oral absorption with normal gastric pH than with high gastric pH. On the other hand, when diclofenac sodium, the salt form of an acidic drug, was applied to the D/P system with the gastric phase, its dissolved and permeated amounts were significantly lower than those without the gastric phase. However, the oral absorption of diclofenac was predicted to be complete (96-98%) irrespective of gastric pH because the permeated amounts of diclofenac under both conditions were sufficiently high to achieve complete absorption. These estimations of the effects of gastric pH on the oral absorption of poorly water-soluble drugs were consistent with observations in humans. In conclusion, the D/P system with the gastric phase may be a useful tool for better predicting the oral absorption of poorly water-soluble basic drugs. In addition, the effects of gastric pH on the oral absorption of poorly water-soluble drugs may be evaluated by the D/P system with and without the gastric phase.

An activated sludge modeling framework for xenobiotic trace chemicals (ASM-X): assessment of diclofenac and carbamazepine.

Conventional models for predicting the fate of xenobiotic organic trace chemicals, identified, and calibrated using data obtained in batch experiments spiked with reference substances, can be limited in predicting xenobiotic removal in wastewater treatment plants (WWTPs). At stake is the level of model complexity required to adequately describe a general theory of xenobiotic removal in WWTPs. In this article, we assess the factors that influence the removal of diclofenac and carbamazepine in activated sludge, and evaluate the complexity required for the model to effectively predict their removal. The results are generalized to previously published cases. Batch experimental results, obtained under anoxic and aerobic conditions, were used to identify extensions to, and to estimate parameter values of the activated sludge modeling framework for Xenobiotic trace chemicals (ASM-X). Measurement and simulation results obtained in the batch experiments, spiked with the diclofenac and carbamazepine content of preclarified municipal wastewater shows comparably high biotransformation rates in the presence of growth substrates. Forward dynamic simulations were performed using full-scale data obtained from Bekkelaget WWTP (Oslo, Norway) to evaluate the model and to estimate the level of re-transformable xenobiotics present in the influent. The results obtained in this study demonstrate that xenobiotic loading conditions can significantly influence the removal capacity of WWTPs. We show that the trace chemical retransformation in upstream sewer pipes can introduce considerable error in assessing the removal efficiency of a WWTP, based only on parent compound concentration measurements. The combination of our data with those from the literature shows that solids retention time (SRT) can enhance the biotransformation of diclofenac, which was not the case for carbamazepine. Model approximation of the xenobiotic concentration, detected in the solid phase, suggest that between approximately 1% and 16% of the total solid carbamazepine and diclofenac concentrations, respectively, is due to sorption-the remainder being non-bioavailable and sequestered. We demonstrate the effectiveness of the model's predictive power over conventional tools in a statistical analysis, performed at four levels of structural complexity. To assess WWTP retrofitting needs to remove xenobiotic trace chemicals, we suggest using mechanistic models, e.g., ASM-X, in regional risk assessments. For preliminary evaluations, we present operating charts that can be used to estimate average xenobiotic removal rates in WWTPs as a function of SRT and the xenobiotics mass loads normalised to design treatment capacity.

[¹¹C]diclofenac sodium: synthesis and PET assessment of transdermal penetration.

The aim of this work was to study the feasibility of using Positron Emission Tomography (PET) imaging as a new tool to detect transdermal penetration of topical drugs in human subjects. The compound used in the study is sodium 2-[(2,6-dichlorophenyl)amino]phenyl]acetate, better known as diclofenac sodium. This molecule belongs to the family of non-steroidal anti-inflammatory drugs and is considered one of the first choices among non-steroidal anti-inflammatory drugs for the treatment of inflammatory diseases; it is widely used and commercially present in a large number of pharmaceutical forms and formulations. (11)C-labeled diclofenac has been synthesized and coformulated, as an internal indicator, with a proprietary preparation based on the use of a sprayer. The radiolabeled preparation was topically administered to healthy volunteers, and PET imaging was used to evaluate transdermal penetration. Results obtained have demonstrated the efficacy of PET and radiolabeled tracers for the evaluation of transdermal penetration of active pharmaceutical ingredients as topical formulations.

A trapping method for semi-quantitative assessment of reactive metabolite formation using [35S]cysteine and [14C]cyanide.

A trapping approach for semi-quantitative assessment of bioactivation potential has been established for new chemical entities by using [(35)S]cysteine and [(14)C]sodium cyanide as trapping reagents. Reactive metabolites were trapped as radioactive adducts with the trapping reagents to be analyzed by radio-LC(/MS). As a reference, hepatotoxic drugs (clozapine, diclofenac, R-(+)-pulegone and troglitazone) were tested in the [(35)S]cysteine trapping assay and the proposed structures of the cysteine adducts were consistent with glutathione adducts previously reported. The accuracy of this methodology to predict bioactivation potential of structurally diverse non-radiolabeled test compounds was evaluated by comparing the radiochromatographic peak area obtained in this assays with the extent of covalent binding to protein assessed by the conventional method using radiolabeled test compounds. The value obtained from the [(35)S]cysteine trapping assay in human liver microsomes predicted potential for covalent binding of the test compounds to proteins with reasonable accuracy. A combination of trapping reagents ([(35)S]cysteine and [(14)C]cyanide) improved the accuracy for prediction of bioactivation potential by simultaneously trapping both types of electrophilic reactive metabolites. This method is expected to be a useful to prioritize compounds for further development based on the bioactivation liability, especially at the lead optimization stage.

Effects of ozone pre-treatment on diclofenac: intermediates, biodegradability and toxicity assessment.

Diclofenac (DCF), a common analgesic, anti-arthritic and anti-rheumatic drug, is one of the most frequently detected compounds in water. This study deals with the degradation of diclofenac in aqueous solution by ozonation. Biodegradability (BOD(5)/COD ratio and Zahn-Wellens test), acute ecotoxicity and inhibition of activated sludge activity were determined in ozonated and non-ozonated samples. Liquid chromatography coupled with time-of-flight mass spectrometry (LC/TOF-MS) was used to identify the intermediates formed in 1 h of ozonation. Eighteen intermediates were identified by these techniques and a tentative degradation pathway for DCF ozonation is proposed. Experimental results show that ozone is efficient at removing DCF: >99% removal (starting from an initial concentration of 0.68 mmol L(-1)) was achieved after 30 min of ozonation (corresponding to an absorbed ozone dose of 0.22 g L(-1), which is 4.58 mmol L(-1)). However, only 24% of the substrate was mineralized after 1 h of ozonation. The biodegradability, respiration inhibition in activated sludge and acute toxicity tests demonstrate that ozonation promotes a more biocompatible effluent of waters containing DCF.

Development of an in vitro drug-drug interaction assay to simultaneously monitor five cytochrome P450 isoforms and performance assessment using drug library compounds.

INTRODUCTION: Inhibition of cytochrome P450 (CYP) is a principal mechanism for metabolism-based drug-drug interactions (DDIs). This article describes a robust, high-throughput CYP-mediated DDI assay using a cocktail of 5 clinically relevant probe substrates with quantification by liquid chromatography/tandem mass spectrometry (LC/MS-MS). METHODS: The assay consisted of human liver microsomes and a cocktail of probe substrates metabolized by the five major CYP isoforms (tacrine for CYP1A2, diclofenac for CYP2C9, (S)-mephenytoin for CYP2C19, dextromethorphan for CYP2D6 and midazolam for CYP3A4). The assay was fully automated in both 96- and 384-well formats. RESULTS: A series of experiments were conducted to define the optimal kinetic parameters and solvent concentrations, as well as, to assess potential reactant and product interference. The assay was validated against known CYP inhibitors (miconazole, sulfaphenazole, ticlopidine, quinidine, ketoconazole, itraconazole, fluoxetine) and evaluated in a screening environment by testing 9494 compounds. DISCUSSION: Our findings show that this assay has application in early stage drug discovery to economically, reliably and accurately assess compounds for DDIs.

Induction of drug metabolizing enzymes: a survey of in vitro methodologies and interpretations used in the pharmaceutical industry--do they comply with FDA recommendations?

The FDA has published guidelines by which to carry out and interpret in vitro induction studies using hepatocytes but do researchers in pharmaceutical companies actually follow these to the letter? In a survey of 30 participants in the pharmaceutical industry, 19 questions were posed regarding the species investigated, methodologies and interpretations of the data. Also addressed was the in-house decision making processes as a result of in vitro induction data. The survey showed that, although the basic methods were similar, no two researchers carried out and interpreted induction assays in exactly the same way. No single method was superior but all included enzyme activities as the major end point. Hepatocytes from animal species were used to confirm animal in vivo data but only human hepatocytes were used to predict human induction responses. If a compound was found to be positive in an in vitro induction assay, few would halt the development of the compound. The majority would consider other properties of the compound (bioavailability, clearance and therapeutic concentrations) and follow the FDA recommendation to conduct clinical drug-drug interaction studies. Overall, the results from this survey indicate that there is no standard pharmaceutical industry method or evaluation criterion by which in vitro assays are carried out. Rather than adhering to the FDA guidelines, some adapt methods and interpretation according to their own experience and need (whether screening or lead optimisation). There was general consensus that studies using human hepatocyte cultures currently provide the best indication of the in vivo induction potential of NCEs. In addition, the assessment of in vitro induction data from the literature suggest that the two-fold induction threshold and the percent of positive control criteria may not be the best methods to accurately assess the in vivo induction potential of a drug. Although the two-fold induction criterion is now obsolete, more predictive models for determining the clinical induction potential are needed. Alternative models are proposed and discussed herein.

Automated assessment of time-dependent inhibition of human cytochrome P450 enzymes using liquid chromatography-tandem mass spectrometry analysis.

Increasing reports of time-dependent inhibition of cytochrome P450 (P450) suggest further emphasis on interpreting the consequences, either from a pharmacokinetic or toxicological perspective. Two automated, time-dependent inhibition assays with a liquid chromatography-tandem mass spectrometric endpoint are presented. The initial assay utilizes human liver microsomes, a single concentration of inhibitor, and a single preincubation time of 30 min. Phenacetin, diclofenac, S-mephenytoin, bufuralol, and midazolam are used as substrates for CYP1A2, 2C9, 2C19, 2D6, and 3A4, and the assay differentiates between reversible and irreversible inhibition. The second assay uses individual recombinant human P450s, six inhibitor concentrations, and three time points to accurately define kinact and KI. A good correlation is demonstrated between kinact/KI and partition ratio, indicating that both terms are related in describing the efficiency of enzyme inactivation. Despite the single preincubation time point of 30 min used in the initial assay, a good relationship has been found to exist between the unbound IC50 estimated from this initial screen and the kinact/KI ratio derived from the more extensive subsequent single P450 assay. The higher throughput human liver microsomal assay can therefore generate IC50 values that can be used to predict the pharmacokinetic impact on cotherapies from the estimated kinact/KI ratio, predicted human dose, and pharmacokinetics.

Assessment of arginine 97 and lysine 72 as determinants of substrate specificity in cytochrome P450 2C9 (CYP2C9).

CYP2C9 is distinguished by a preference for substrates bearing a negative charge at physiological pH. Previous studies have suggested that CYP2C9 residues R97 and K72 may play roles in determining preference for anionic substrates by interaction at the active site or in the access channel. The aim of the present study was to assess the role of these two residues in determining substrate selectivity. R97 and K72 were substituted with negative, uncharged polar and hydrophobic residues using a degenerate polymerase chain reaction-directed strategy. Wild-type and mutant enzymes were expressed in bicistronic format with human cytochrome P450 reductase in Escherichia coli. Mutation of R97 led to a loss of holoenzyme expression for R97A, R97V, R97L, R97T, and R97E mutants. Low levels of hemoprotein were detected for R97Q, R97K, R97I, and R97P mutants. Significant apoenzyme was observed, suggesting that heme insertion or protein stability was compromised in R97 mutants. These observations are consistent with a structural role for R97 in addition to any role in substrate binding. By contrast, all K72 mutants examined (K72E, K72Q, K72V, and K72L) could be expressed as hemoprotein at levels comparable to wild-type. Type I binding spectra were obtained with wild-type and K72 mutants using diclofenac and ibuprofen. Mutation of K72 had little or no effect on the interaction with these substrates, arguing against a critical role in determining substrate specificity. Thus, neither residue appears to play a role in determining substrate specificity, but a structural role for R97 can be proposed consistent with recently published crystallographic data for CYP2C9 and CYP2C5.

Cytochrome P450 inhibition using recombinant proteins and mass spectrometry/multiple reaction monitoring technology in a cassette incubation.

Detailed cytochrome P450 (P450) inhibition profiles are now required for the registration of novel molecular entities. This method uses combined substrates (phenacetin, diclofenac, S-mephenytoin, bufuralol, and midazolam) with combined recombinant P450 enzymes (CYP1A2, 2C9, 2C19, 2D6, and 3A4) in an attempt to limit interactions with other more minor P450s and associated reductases. Kinetic analysis of single substrate with single P450 (sP450) yielded apparent Km values of 25, 2, 20, 9, and 3 microM, for CYP1A2, 2C9, 2C19, 2D6, and 3A4, respectively. Combined substrates with combined P450s (cP450) yielded apparent Km values of 65, 4, 19, 7, and 2 microM. Selectivity of the substrates for each P450 isoform was checked. Phenacetin proved to be the least selective substrate. However, the ratio of the various P450s was modified in the final assay such that metabolism of phenacetin by other enzymes was approximately 20% of the metabolism by CYP1A2. IC50 determinations with alpha-naphthoflavone (0.04 microM), sulfaphenazole (0.26 microM), tranylcypromine (9 microM), quinidine (0.02 microM), and ketoconazole (0.01 microM) were similar for sP450 and cP450 enzymes. The assay was further evaluated with 11 literature compounds and 52 in-house new chemical entities, and the data compared with radiometric/fluorescent values. The overall protein level of the assay was reduced from the original starting point, as this led to some artificially high IC50 measurements when compared with existing lower protein assays (radiometric/fluorometric). This method offers high throughput P450 inhibition profiling with potential advantages over current radiometric or fluorometric methods.