A Case Study of Ergonomic Risk Assessment in Slovakia with Respect to EU Standard.

Attention on work-related musculoskeletal disorders (WMSDs) involves statistical surveys showing an increasing trend in the incidence of WMSDs. Technological development has led to new tools and methods for the assessment of physical load at work. These methods are mostly based on the direct sensing of appropriate parameters, which allows more precise quantification. The aim of this paper is to compare several commonly used methods in Slovakia for the assessment of ergonomic risk reflecting current EU and Slovak legislative regulations. A Captiv wireless sensory system was used at a car headlight quality control assembly workplace for sensing, data acquisition and data processing. During the evaluation of postures and movements at work, we discovered differences in the applicable standards: Decree 542/2007 Coll. (Slovak Legislation), the STN EN 1005-4+A1, and the French standards default in the Captiv system. Standards define the thresholds for hazardous postures with significant differences in several evaluated body segments, which affects the final evaluation of the measurements. Our experience from applying improved risk assessment methodology may have an impact on Slovak industrial workplaces. It was confirmed that there is a need to create uniform standards for the ergonomic risk assessment of body posture, including a detailed description of the threshold values for individual body segments.

Comparison of multi-task ergonomic assessment methods for risk of upper extremity and low back musculoskeletal disorders.

Work-related musculoskeletal disorder of upper extremity multi-task assessment methods (Revised Strain Index [RSI], Distal Upper Extremity Tool [DUET]) and manual handling multi-task assessment methods (Revised NIOSH Lifting Equation [RNLE], Lifting Fatigue Failure Tool [LiFFT]) were compared. RSI and DUET showed a strong correlation (rs = 0.933, p < 0.001) where increasing risk factor exposure resulted in increasing outputs for both methods. RSI and DUET demonstrated fair agreement (κ = 0.299) in how the two methods classified outputs into risk categories (high, moderate or low) when assessing the same tasks. The RNLE and LiFFT showed a strong correlation (rs = 0.903, p = 0.001) where increasing risk factor exposure resulted in increasing outputs, and moderate agreement (κ = 0.574) in classifying the outputs into risk categories (high, moderate or low) when assessing the same tasks. The multi-task assessment methods provide consistent output magnitude rankings in terms of increasing exposure, however some differences exist between how different methods classify the outputs into risk categories.

Risk assessment of healthcare workers' exposure to physical load in relation to patient handling and movement: a feasibility study of the instrument TilThermometer.

BACKGROUND: Work-related musculoskeletal disorders are common among healthcare workers (HCWs) but might be prevented by risk assessment and further promotion of occupational safety and health. The aim of this study was to investigate if the risk assessment instrument TilThermometer can be used to identify risk profiles of physical exposure in HCWs working with patient handling and movement (PHM). Further aims were to describe HCWs' perceptions and experiences of using the TilThermometer. METHODS: This feasibility study has a mixed design methodology. In total, 54 HCWs from 17 Swedish care units participated and performed risk assessments with the TilThermometer. Data collected from the risk assessments were used to identify risk profiles of physical exposure. HCWs' experiences of using the TilThermometer were collected from activity logs and analysed qualitatively. Three questionnaires were used to assess perceived acceptability, appropriateness, and feasibility of the risk assessment, and eight study specific questions were used for perceived usefulness. RESULTS: The TilThermometer was used at the care units by assessing each care recipient, and when compiling the data at a group level, a summarized risk profile for the care unit could be provided. Risk for physical exposure was reported as high in two work tasks; no care unit used the high-low adjustable seat when showering care recipients sitting down, and 13% used the recommended assistive devices when putting compression stockings on. However, 99% used high-low adjustable assistive devices when caring and bathing care recipients lying down. TilThermometer was described as easy to use, enabling team reflections and providing an overview of the care units' recipients and workload, but difficulties in categorizing for mobility groups were also reported. The TilThermometer was, on a five-point scale, perceived as acceptable (mean 3.93), appropriate (mean 3.9), and feasible (mean 3.97). These scores are in line with questions evaluating usefulness. CONCLUSION: The risk assessment provided risk profiles with potential to contribute to care units' development of a safe patient handling and movement practice. The findings suggest that the TilThermometer can be used to assess risks for physical exposure in relation to patient handling and movement in care units at hospital and nursing homes.

Assessment and evaluation of work-related musculoskeletal disorders among nuclear medicine professionals in India: A cross-sectional study.

BACKGROUND: Musculoskeletal disorders (MSDs) are a severe occupational health issue among medical radiation practitioners. It is mostly linked to personal protective wear, working posture, tools employed and ergonomics. OBJECTIVE: To assess and evaluate the musculoskeletal disorders among nuclear medicine professionals (NMP) in India. METHODS: An online survey was distributed to 455 NMP throughout India between November 2021 and March 2022 covering the demographic characteristics and questions for evaluation of musculoskeletal symptoms using the Standardized Nordic Musculoskeletal Questionnaire (NMQ). Participants with any pre-existing musculoskeletal disorder or trauma were excluded. Descriptive statistics summarized the data from the demographics, discomfort, aches and work-related musculoskeletal injuries. Chi-square test was used to examine the association between the obtained values. RESULTS: 91 out of 124 respondents were included based on the inclusion and exclusion criteria. Results shows that there is a significant association between the height of the individual and neck pain, body mass index and elbows pain, age and low back pain, experience in the current work and upper back pain, the weight of the individual and knee pain, use of mobile lead screens and shoulder pain, use of gonad shield, trouble in the ankles and use of lead screens, and QC phantoms for gamma camera / PET and wrists/hands pain. CONCLUSION: Work-related musculoskeletal disorders among NMP are resulting from factors of individual demographic variables (such as age, height, weight, body mass index), years of experience at the current workplace and of using instruments in their work area.

Trends in severity of work-related traumatic injury and musculoskeletal disorder, Ontario 2004-2017.

OBJECTIVES: Traumatic injury surveillance can be enhanced by describing injury severity trends. This study reports trends in work-related injury severity for males and females over the period 2004-2017 in Ontario, Canada. METHODS: A weighted measure of workers' compensation benefit expenditures was used to define injury severity, obtained from the linkage of workers' compensation claims to emergency department (ED) records where the main injury or illness was attributed to work. Denominator counts were obtained from Statistics Canada's Labor Force Survey. Trends in the annual incidence of injury, classified as low, moderate, or high severity, were examined using regression modeling, stratified by age and sex. RESULTS: Over a 14-year observation period, there were 1,636,866 ED records included in the analyses. Overall, 57.6% of occupational injury records were classified as low severity, 29.5% as moderate severity, and 12.8% as high severity conditions. There was an increase in the incidence of high severity injuries among females (annual percent change (APC): 1.52%; 95% CI: 0.77, 2.28), while the incidence of low and moderate severity injuries generally declined for males and females. Among females, injuries attributed to animate mechanical forces and assault increased as causes of low, moderate, and high severity injuries. The incidence of concussion increased for both males (APC: 10.51%; 95% CI: 8.18, 12.88) and females (APC: 16.37%; 95% CI: 13.37, 19.45). CONCLUSION: The incidence of severe work-related injuries increased among females in Ontario between 2004 and 2017. The methods applied in this surveillance study of traumatic injury severity are plausibly generalizable to applications in other jurisdictions.

Changes needed to reduce risk of musculoskeletal disorders.

Musculoskeletal disorders (MSDs) are the main contributor to disability levels, which are rising as populations age. Workplace hazard exposures are a major source of this problem, and current workplace risk management practices require substantial changes to tackle it more effectively. Most importantly, the current focus of risk management on "manual handling" tasks must broaden to encompass the whole job. This is necessary because a wide range of psychosocial hazards, most of which operate across the whole job rather than particular tasks, are significant contributors to risk. To ensure that risk-control actions are effective, a recurring risk management cycle that includes worker participation and addresses risk from both biomechanical and psychosocial hazards will be essential. Legislation that mandates workplace management of psychosocial hazards would be helpful. Amendment by regulatory bodies of MSD-related guidance and codes of practice so that they reflect current research evidence would also be helpful in communicating the need for change to workplace stakeholders.

Dimensional assessment of self-reported musculoskeletal symptoms by workers: A multi-case study.

BACKGROUND: Work-related musculoskeletal disorders (WMSD) encompass a range of conditions affecting muscles, tendons, and nerves. Visual diagrams are widely used to identify symptoms and to generate musculoskeletal discomfort metrics. However, there is no consensus on the number of discomfort dimensions that can originate from self-reported musculoskeletal symptoms by individuals. OBJECTIVE: This study aimed to test the fit of WMSD symptom models from workers in two samples of different sizes. METHODS: A combination of Full-Information Item Factor Analysis (FIFA) and Item Response Theory (IRT) was utilized to analyze and test the models. The study was conducted in two samples of workers (n1 = 6944 and n2 = 420) who had their symptoms identified with the aid of a human body diagram. An analysis was conducted considering each sample's unidimensional and three multidimensional models. RESULTS: The unidimensional model (general musculoskeletal discomfort), bi-dimensional model (discomfort in upper and lower body), and tridimensional model (discomfort in the upper limbs, lower limbs, and trunk) showed good values of factor loading and communalities, along with satisfactory item discrimination ability. Regardless of sample size, parameter estimation for IRT and FIFA proceeded without issues, presenting suitable fit parameters. CONCLUSION: Three models were valid and reliable for more extensive and smaller samples. However, the tridimensional model was best for generating discomfort scores in body regions. Companies and safety professionals can use these findings to devise strategies to mitigate musculoskeletal pains based on perceived symptom locations.

Individual and organizational factors associated with injury history and patient handling behaviors: Results from a nationwide survey of healthcare workers.

With proper compliance, safe patient handling and mobility (SPHM) programs reduce musculoskeletal disorders (MSDs). To better understand individual, environmental, and organizational factors associated with both the adoption of SPHM and prevalence of MSDs, a nationwide online survey was administered. 973 healthcare workers (HCWs) completed the survey, for which 59.6% reported past work-related MSDs or pain. Among those with pain or injury, 33.3% changed roles, 79.7% worked while injured, and only 30.9% reported workers' compensation claims. Less than half of HCWs agreed that SPHM equipment is readily available, and most considered manually handling patients weighing over 91 kg acceptable. Equipment availability, ceiling lift availability, supervisor encouragement, and annual training were associated with increased use of SPHM equipment. Availability of SPHM equipment reduced the likelihood of injured nurses changing roles. Despite overall agreement that SPHM programs are beneficial, common clinical practice remains insufficient to adequately protect HCWs from risk of injury.

Physical job demands in pregnancy and associated musculoskeletal health and employment outcomes: a systematic review.

OBJECTIVE: A decline in musculoskeletal health during pregnancy is an underappreciated adverse outcome of pregnancy that can have immediate and long-term health consequences. High physical job demands are known risk factors for nontraumatic musculoskeletal disorders in the general working population. Evidence from meta-analyses suggest that occupational lifting and prolonged standing during pregnancy may increase risk of adverse pregnancy outcomes. This systematic review examined associations between occupational lifting or postural load in pregnancy and associated musculoskeletal disorders and related sequalae. DATA SOURCES: Five electronic databases (Medline, Embase, CINAHL, NIOSHTIC-2, and Ergonomic Abstracts) were searched from 1990 to July 2022 for studies in any language. A Web of Science snowball search was performed in December 2022. Reference lists were manually reviewed. STUDY ELIGIBILITY CRITERIA: Eligible studies reported associations between occupational lifting or postural load and musculoskeletal health or sequelae (eg, employment outcomes) among pregnant and postpartum workers. METHODS: Data were extracted using a customized form to document study and sample characteristics; and details of exposures, outcomes, covariates, and analyses. Investigators independently assessed study quality for 7 risk-of-bias domains and overall utility, with discrepant ratings resolved through discussion. A narrative synthesis was conducted due to heterogeneity. RESULTS: Sixteen studies (11 cohort studies, 2 nested case-control studies, and 3 cross-sectional studies) from 8 countries were included (N=142,320 pregnant and N=1744 postpartum workers). Limited but consistent evidence with variable quality ratings, ranging from critical concern to high, suggests that pregnant workers exposed to heavy lifting (usually defined as ≥22 lbs or ≥10 kg) may be at increased risk of functionally limiting pelvic girdle pain and antenatal leave. Moreover, reports of dose-response relationships suggest graded risk levels according to lifting frequency, ranging from 21% to 45% for pelvic girdle pain and 58% to 202% for antenatal leave. Limited but consistent evidence also suggests that postural load increases the risk of employment cessation. CONCLUSION: Limited but consistent evidence suggests that pregnant workers exposed to heavy lifting and postural load are at increased risk of pelvic girdle pain and employment cessation. Job accommodations to reduce exposure levels may promote safe sustainable employment for pregnant workers.

Machine learning approach to determine the decision rules in ergonomic assessment of working posture in sewing machine operators.

INTRODUCTION: There are some inherent problems with the use of observation methods in the ergonomic assessment of working posture, namely the stability and precision of the measurements. This study aims to use a machine learning (ML) approach to avoid the subjectivity bias of observational methods in ergonomic assessments and further identify risk patterns for work-related musculoskeletal disorders (WMSDs) among sewing machine operators. METHODS: We proposed a decision tree analysis scheme for ergonomic assessment in working postures (DTAS-EAWP). First, DTAS-EAWP used computer vision-based technology to detect the body movement angles from the on-site working videos to generate a dataset of risk scores through the criteria of Rapid Entire Body Assessment (REBA) for sewing machine operators. Second, data mining techniques (WEKA) using the C4.5 algorithm were used to construct a representative decision tree (RDT) with paths of various risk levels, and attribute importance analysis was performed to determine the critical body segments for WMSDs. RESULTS: DTAS-EAWP was able to recognize 11,211 samples of continuous working postures in sewing machine operation and calculate the corresponding final REBA scores. A total of 13 decision rules were constructed in the RDT, with over 95% prediction accuracy and 83% path coverage, to depict the possible risk tendency in the working postures. Through RDT and attribute importance analysis, it was identified that the lower arm and the upper arms exhibited as critical segments that significantly increased the risk levels for WMSDs. CONCLUSIONS: This study demonstrates that ML approach with computer vision-based estimation and DT analysis are feasible for comprehensively exploring the decision rules in ergonomic assessment of working postures for risk prediction of WMSDs in sewing machine operators. PRACTICAL APPLICATIONS: This DTAS-EAWP can be applied in manufacturing industries to automatically analyze working postures and identify risk patterns of WMSDs, leading to the development of effectively preventive interventions.

Physiological responses, trunk posture, and work pace in commercial building cleaning in Washington State: An observational field study.

INTRODUCTION: This study aimed to investigate whether work pace is a critical indicator for predicting a janitor's risk of work-related musculoskeletal disorders (WMSDs). METHOD: Field measurements were obtained from commercial building janitors as well as the determination of work pace. Physiological responses collected were heart rate, energy expenditure (calories), activity level (METs), steps, trunk posture. Data were obtained using direct measurements, along with a time study, which was performed by shadowing 13 janitors in Washington State. The measured values were summarized descriptively, and five of the most common janitorial tasks were compared. The relationships between work pace and the physiological response variables were determined by calculating the Pearson product-moment correlation coefficients. RESULTS: The highest average percent heart rate reserve (47.4%) was reported during restroom cleaning, while the highest activity and energy expenditure levels (3.6 METs and 217.1 calories/h) were reported for mopping. The top 90% of trunk flexion angles and the highest percentage of time in trunk flexion from 20° to 60° were recorded during restroom cleaning. Restroom cleaning showed the highest correlation between all the physiological response variables and work pace. In most of the tasks, a high work pace may have increased the degree and duration of severe trunk flexion. CONCLUSION: Overall, when several tasks were considered, the extent of physiological responses, trunk joint angles, and exposure time to awkward postures tended to increase with an increase in work pace. PRACTICAL APPLICATIONS: This study showed the feasibility of using the work pace measured from time studies as a predictive indicator of WMSDs risks. Using this information, managers may compose a schedule that can minimize WMSDs risks while considering actual work pace deviations that may impact a janitor's ability to complete assigned tasks properly within a shift.

Developing a framework for the implementation of recommendations for lifestyle factors for people with RMDs across Europe: assessment of current materials and implementation needs.

Lifestyle factors (such as diet, physical activity or smoking habits, among others) are known to influence the progression of rheumatic and musculoskeletal diseases (RMDs). Despite contemporary improvements in RMD care, the management of lifestyle factors is suboptimal. In the context of a recent European Alliance of Associations for Rheumatology (EULAR) task force, existing informative materials regarding lifestyle factors for people with RMDs were collected from national organisations across European countries. Current materials show important limitations in terms of coverage, literature support and access, which may make the implementation of successful interventions difficult. In the present viewpoint, a roadmap to cover these gaps at the European level with the recent EULAR recommendations on lifestyle factors is discussed from an implementation perspective. This analysis may pave the ground for future implementation endeavours at the European level related to non-pharmacological interventions that may also be applicable beyond rheumatology.

Assessment of dental ergonomics among dental students: A retrospective study.

INTRODUCTION: Musculoskeletal (MSK) disorders account for 11%-98% of occupational health issues for dental professionals, with an onset as early as in dental school. Dental ergonomics is among the risk factors; thus, a prompt assessment is crucial in preventing future MSK pain. The aim of this study was to retrospectively assess dental ergonomics of second-year dental students after dedicated lectures were introduced in the predoctoral curriculum. METHODS: Three cohorts of second-year dental students were evaluated during preclinical activity in July 2019, January 2022, and December 2022 by an Occupational Therapy (OT) faculty and calibrated OT students. Dental ergonomics was assessed with the Rapid Upper Limb Assessment (RULA). Dental student cohorts were compared with one-way analysis of variance (ANOVA). RESULTS: The average RULA final score of 409 participants was 5.1 ± 0.9, with no difference between the three cohorts (p = 0.676). The January 2022 cohort scored significantly lower in wrist-arm score than that of 2019 (p = 0.001) and December 2022 (p = 0.046). Neck and lower limb posture were significantly higher in January 2022 cohort than in 2019 (p = 0.001 and 0.013) and December 2022 (p = 0.001 and 0.005) cohorts. The December 2022 cohort revealed a medium, high and extremely high risk of developing MSK of 40.2%, 37.1%, and 21.6%, respectively, with no difference between sexes. CONCLUSION: The risk of developing MSK pain was medium-high in predoctoral dental students and was not related to sex. The overall dental ergonomics required attention and rapid change. Further implementation of varied forms of teaching and monitoring of dental ergonomics from the early years of education is recommended to prevent development of MSK pain at young age and foster better postural habits.

Identification of Hazards and Assessment of Risks associated with the Harvesting of Coffee.

OBJECTIVE: To study the factors associated with the occupational risks affecting coffee harvesters from Timbío, Cauca, Colombia. METHODS: This descriptive study assessed workplace conditions, aiming to design a mitigation proposal that would help alleviate the dangers currently facing the studied population. The data were collected through 19 visits to the coffee plantations. A survey to characterize workers and determine the presence of musculoskeletal lesions was applied; in addition, the Colombian Technical Guide (GTC 45, by its initials in Spanish) was consulted. RESULTS: Coffee harvesting comes with several high priority risks, of which those that are biomechanical stand out. These are the result of strained positions, antigravity postures, repetitive movements, high physical effort, and the manual handling of heavy objects. Additionally, there are psychosocial risks attend the kind of contract, the low wages, the lack of social security, and the lack of affiliation with the occupational risk-management system. During the data collection, 18% of the workers reported having had an occupational accident while harvesting coffee. CONCLUSION: The process for identifying danger and assessing risk established, for all the cases, a level 1 risk. According to the rating scale of the GTC 45, such a level is unacceptable. We concluded that it is necessary to take immediate measures to control the identified dangers. To improve the health of the members of the studied sample, we propose the implementation of an epidemiological surveillance system for musculoskeletal injuries.

Work-related musculoskeletal disorders in agriculture: Ergonomics risk assessment and its prevention among Indian farmers.

BACKGROUND: Indian farmers have musculoskeletal disorders as agriculture is a physically demanding occupation. OBJECTIVES: The main aim of this study is to identify ergonomic and psychosocial risk factors associated with musculoskeletal disorders (MSDs) among different groups of farmers. The other objective is to investigate how MSDs affect farmers' daily lives and interfere with their activities. METHODS: Farmers were evaluated for the repetitiveness of work and MSDs using the standard Nordic questionnaire, ergonomic assessment tool (REBA), and ART tool. RESULTS: Low back portions were the most affected body parts, followed by the knees (OR = 0.352; 95% CI = 0.280-0.598), shoulder (OR = 0.657; 95% CI = 0.405-1.066), neck (OR = 0.510; 95% CI = 0.350-0.743), ankle or foot (OR = 0.815; 95% CI = 0.556-1.196), and upper back region (OR = 0.681; 95% CI = 0.463-1.002). The REBA method found that most of the postures in farming are very dangerous. The ART tool showed that most of the activities are repetitive. Working long hours (90%) and monotony at work (87.5%) are the main psychosocial factors, followed by pressure to finish within a given timeframe (71.4%) and injuries related to MSDs. CONCLUSION: Farmers suffer from musculoskeletal disorders in various body parts (lower back, knee, neck, shoulder, and upper back) due to squatting, stooping, and other constrained working postures during agricultural activities. rolonged working hours, repetitive movements, and MMH are ergonomic risk factors forFurthermore, p MSDs.

The prevalence and severity of sick-leaves due to musculoskeletal disorders among workers in water supply; sewerage, waste management and remediation activities.

The aim of this study was to analyse the nationwide data on sick leaves (SL) due to work-related musculoskeletal disorders among Slovenian workers in section E "water supply; sewerage, waste management and remediation activities" from NACE Rev2 classification. We report both, SL frequency (ie, number of cases) and SL severity (ie, average SL duration), stratified by body region, gender, age and divisions within the section. In addition, trends in SL data (year 2015-2019 difference) were analyzed. Throughout the analysed years, ∼9,000 workers were employed in the section, with male to female ratio at ∼ 4:1. The major findings are as follows: (i) low back disorders were by far the most prevalent, however, the mean SL duration was the highest for lower limb disorders; (ii) older age was associated with increased SL frequency and duration, irrespective of gender; (iii) male gender was consistently associated with larger SL duration, while the data on SL frequency is inconclusive, as older females had more frequent SL than older males; (iv) the effect of division was relatively minor and the comparisons are limited due to large discrepancies regarding the number of workers across divisions; (v) a slight increasing trend for both SL frequency and duration was observed from 2015 to 2019. In conclusion, particular attention in terms of early diagnosis and treatment of musculoskeletal disorders should be given to male workers and older workers in general in section E.

Effects of sex and age on work-related upper extremity musculoskeletal disorders in Ontario, Canada.

BACKGROUND: Effective targeting of workplace upper extremity musculoskeletal disorder (MSD) prevention strategies requires the identification of demographic groups most at risk. Workers' compensation data provides an effective means of surveillance of MSDs at the population level. OBJECTIVE: The primary purpose of this study was to identify the effects of age and sex on rates of tendon injuries of the wrist and hand, carpal tunnel syndrome (CTS), epicondylitis, and soft tissue shoulder injuries in Ontario, Canada between 2000-2019 using workers' compensation data from the Association of Workers Compensation Boards of Canada (AWCBC). METHODS: Age and sex specific rates of lost-time injury claims from the four identified injury categories as well as "non-specific" upper extremity MSDs which did not fit into the four categories were calculated by standardizing injury claim totals with "at-risk" population estimates from the Canada Labour Force Survey. A multiple regression analysis was used to analyze the effects of age and sex on rates of specific injury claims. RESULTS: Statistically significant age and sex effects were identified for rates of claims from tendon injuries of the wrist and hand, CTS, and shoulder injuries, while only age effects were significant for epicondylitis. Between 2000-2019, rates of claims from the four injury categories studied and the magnitude of the age and sex effects declined substantially over time. CONCLUSION: Detailed surveillance of workplace ergonomic hazards in Ontario workplaces is needed to determine what is causing rates of upper extremity claims to decline.

Ergonomic risk assessment during massage among physiotherapists: Introduction of generic postures notion.

BACKGROUND: Musculoskeletal disorders are prevalent among physiotherapists. They perform many repetitive tasks in awkward postures that require a high muscle load. This issue was often addressed through subjective analysis (questionnaire) but rarely using postural evaluation combined with an ergonomic assessment. OBJECTIVE: The aim of this article was to decompose draining lymphatic massage performed by physiotherapists in generic postures (GP) to quickly assess the musculoskeletal disorder risk. METHODS: Based on numeric video recorded in frontal and sagittal planes, 3360 postures were defined from 20-minutes lymphatic drainage massage performed by 7 physiotherapists over a period of 6 months. A hierarchical cluster analysis was applied to define the GP. RESULTS: Seven GP were identified, which were described by their average joint angles, variability and relative frequency. GP6, GP4 and GP2 had the highest frequencies (17.6%, 16.9% and 16.8% respectively). Trunk and neck were essentially flexed (neck: 17.0±10.0° for GP1; trunk: 20.4±8.7° for GP4). Shoulder flexion and abduction ranged from 15° (GP7) to 60° (GP4). Mean and variability of RULA score completed the analysis. The highest scores were computed for GP2 and GP3 (respectively 5.5±1.3 and 5.8±1.2, p < 0.05). GP4 had the lowest (4.0±1.1, p < 0.05). The results suggest that massages have to be monitored. Attention should be paid to the postures used to prevent the occurrence of MSDs. CONCLUSION: The massages could be described as a combination of generic posture for a rapid ergonomic assessment.

Musculoskeletal disorders risk assessment methods: a scoping review from a sex perspective.

The evidence points to differences in the impact of musculoskeletal disorders (MSD) in males and females due to different exposure to risk factors and inherent characteristics. To identify risks associated with MSDs, ergonomic assessment is carried out by applying various methods. The aim of this scoping review was to determine to what extent ergonomic assessment methods consider sex-related factors and if they were found to do so, to determine the extent of this consideration. A total of 31 papers on 32 ergonomic assessment methods were analysed in the review. Of these 32 methods, only 6 considered sex as an assessment parameter or when interpreting the results. The results revealed that the limited consideration given to the sex factor in ergonomic methods, together with the different impacts of MSDs and their consequences according to a person's sex, supports the importance of including sex factors in ergonomic assessment methods. Practitioner summary: This scoping review determined to what extent ergonomic assessment methods consider sex-related factors and if they do so, to establish the extent of such consideration. Of the 32 methods analysed, only 6 considered a person's sex. The results revealed that only a limited consideration is given to the sex factor in ergonomic methods.

Ergonomic Risk Assessment of Oral and Maxillofacial Surgeons - RULA Applied to Objective Kinematic Data.

BACKGROUND: The prevalence of musculoskeletal disorders is high in oral and maxillofacial surgeons (OS) due to their static and contorted working positions. Hence, the aim of this study was to conduct posture analyses in this specific group of dental professionals using the Rapid Upper Limb Assessment (RULA). METHODS: In total, 15 (12 m/3 f) OS participated in this study. An inertial motion capture system (Xsens) was used to collect kinematic data during a simulated workflow. Computer-based routines calculated the RULA score for the extracted joint angles at each defined time point. Then, an analysis of the time-dependent RULA scores by body regions was conducted. Key variables were the relative occurrence of specific RULA scores during the complete workflow, individual subtasks, and for treatment of each of the four different dental quadrants. The subtasks and dental quadrants were compared using the Friedman test. RESULTS: The total median RULA score represented a high risk for OS during their work (7), including the temporal component (OS spent 77.54% of their working time with a RULA score of 7). The wrists and hands, elbows, lower arms, and the neck were exposed to postures with the highest risk for musculoskeletal strain. DISCUSSION: For OS, both the right and the left assisting hand were heavily strained while working on the first dental quadrant caused the most unfavorable postures for OS.