Ferulic acid nanoemulsion as a promising anti-ulcer tool: in vitro and in vivo assessment.

OBJECTIVE: Ferulic acid (FA) is a promising nutraceutical molecule which exhibits antioxidant and anti-inflammatory properties, but it suffers from poor solubility and bioavailability. In the presented study, FA nanoemulsions were prepared to potentiate the therapeutic efficacy of FA in prevention of gastric ulcer. METHODS: FA nanoemulsions were prepared, pharmaceutically characterized, and the selected nanoemusion was tested for its ulcer-ameliorative properties in rats after induction of gastric ulcer using ethanol, by examination of stomach tissues, assessment of serum IL-1ß and TNF-α, assessment of nitric oxide, prostaglandin E2, glutathione, catalase and thiobarbituric acid reactive substance in stomach homogenates, as well as histological and immunohistochemical evaluation. RESULTS: Results revealed that the selected FA nanoemulsion showed a particle size of 90.43 nm, sustained release of FA for 8 h, and better in vitro anti-inflammatory properties than FA. Moreover, FA nanoemulsion exhibited significantly better anti-inflammatory and antioxidant properties in vivo, and the gastric tissue treated with FA nanoemulsion was comparable to the normal control upon histological and immunohistochemical evaluation. CONCLUSION: Findings suggest that the prepared ferulic acid nanoemulsion is an ideal anti-ulcer system, which is worthy of further investigations.

The roles of ceramides and multivesicular emulsion (MVE) technology in atopic dermatitis: a narrative review.

INTRODUCTION: Atopic dermatitis (AD) is a highly prevalent chronic inflammatory skin condition. In Malaysia, a prevalence of 13.4% was reported for children between one and six years of age, one of the highest prevalence rates of AD in Asia. Many guidelines recommended moisturisers as the mainstay of treatment strategy for AD. Selecting an effective and suitable moisturiser for people with AD plays a crucial role in avoiding acute exacerbation of AD and achieving remission. MATERIALS AND METHODS: Given that an array of active ingredients and topical vehicles for moisturisers are available in the market, this review summarised the roles of ceramides and multivesicular emulsion (MVE) technology in managing AD to help guide treatment decisions. RESULTS: Ceramides are essential in maintaining the skin permeability barrier and hydration, modulating skin immunity through anti-inflammatory and antimicrobial defence system, and regulating cellular functions. Low levels and altered structures and composition of ceramides, compromised skin permeability barrier and increased transepidermal water loss were commonly observed in AD patients. Most clinical studies have shown that ceramidedominant moisturisers are safe and effective in adults and children with AD. MVE technology offers an attractive delivery system to replenish ceramides in the SC, repairing the compromised skin permeability barrier and potentially improving patient compliance. CONCLUSION: Recommending clinically proven therapeutic moisturisers with the right ingredients (level, ratio, structure and composition), alongside an effective sustained release delivery system, to AD patients is one key strategy to successful disease control and flare prevention, subsequently reducing the disease burden to patients, families and societies.

Resveratrol-loaded octenyl succinic anhydride modified starch emulsions and hydroxypropyl methylcellulose (HPMC) microparticles: Cytotoxicity and antioxidant bioactivity assessment after in vitro digestion.

Hydroxypropyl methylcellulose (HPMC)-based microparticles and modified starch emulsions (OSA-MS) were loaded with resveratrol and characterized regarding their physicochemical and thermal properties. Both delivery systems were subject to an in vitro gastrointestinal digestion to assess the bioaccessibility of resveratrol. In addition, cell-based studies were conducted after in vitro digestion and cytotoxicity and oxidative stress were assessed. HPMC-based microparticles displayed higher average sizes (d) and lower polydispersity index (PDI) (d = 948 nm, PDI < 0.2) when compared to OSA-MS-based emulsions (d = 217 nm, PDI < 0.3). Both proved to protect resveratrol under digestive conditions, leading to an increase in bioaccessibility. Resveratrol-loaded HPMC-microparticles showed a higher bioaccessibility (56.7 %) than resveratrol-loaded emulsions (19.7 %). Digested samples were tested in differentiated co-cultures of Caco-2 and HT29-MTX, aiming at assessing cytotoxicity and oxidative stress, and a lack of cytotoxicity was observed for all samples. Results displayed an increasing antioxidant activity, with 1.6-fold and 1.4-fold increases over the antioxidant activity of free resveratrol, for HPMC-microparticles and OSA-MS nanoemulsions, respectively. Our results offer insight into physiological relevancy due to assessment post-digestion and highlight the protection that the use of micro-nano delivery systems can confer to resveratrol and their potential to be used as functional food ingredients capable of providing antioxidant benefits upon consumption.

Assessment of the efficacy of 0.1% cyclosporine A cationic emulsion in the treatment of dry eye disease during COVID-19 pandemic.

Objective: To assess the efficacy of 0.1% cyclosporine A (CsA) cationic emulsion (CE) in the treatment of dry eye disease (DED) in terms of ocular surface disease index (OSDI). Methods: DED patients with corneal fluorescein staining grade (CFS) ≤ 3 on the Oxford scale and Schirmer test score < 10 mm/ 5 min were enrolled for once-daily CsA use in this observational, prospective, one-center study. Efficacy of CE at 30, 60, and 90-day follow-up visit was evaluated using OSDI questionnaire. Both the overall OSDI score and the outcomes for all subscales - ocular symptoms (OS), vision-related function (VRF) and environmental triggers (ET) were considered. Results: Twelve patients (10 women and 2 men), whose baseline OSDI ranged between 27.08 and 70.03 mm (48.2 ± 11.8), were included. Their achieved mean scores for subscales such OS, VRF and ET were 66.6 ± 16.8, 42.2 ± 12.0 and 42.2 ± 12.5, respectively. Statistically significant results were obtained after 30 days for OSDI (45.5 ± 10.0; p=0.011), whereas after 90 days for both OSDI (35.4 ± 7.4; p=0.003) and OS (47.2 ± 10.9; p=0.005), VRF (30.5 ± 6.1; p=0.003) and ET (33.3 ± 11.2; p=0.008). Conclusions: CsA CE significantly reduced symptoms of patients with DED. Recovery was the most successful after 90 days of treatment and included OSDI, OS, VRF and ET. Abbreviations: CE = cationic emulsion, CFS = corneal fluorescein staining, CsA = cyclosporine A, DED = dry eye disease, ET = environmental triggers, OS = ocular symptoms, OSDI = ocular surface disease index, VRF = vision-related function.

Avocado seed by-product uses in emulsion-type ingredients with nutraceutical value: Stability, cytotoxicity, nutraceutical properties, and assessment of in vitro oral-gastric digestion.

The avocado industry obtains 20-30% of the total by-products (peels and seeds). However, byproducts can be uses as sources of economic nutraceutical ingredients with functional potential. This work developed emulsion-type ingredients from avocado seed to evaluate its quality, stability, cytotoxicity, and nutraceutical properties before/after in vitro oral-gastric digestion. Ultrasound lipid extraction achieved an extraction yield of up to 95.75% compared with Soxhlet conventional extraction (p > 0.05). Six ingredients' formulations (E1-E6) were stable for up to day 20 during storage, preserving their antioxidant capacity and displaying low in vitro oxidation compared to control. None of the emulsion-type ingredients were considered cytotoxic according to the shrimp lethality assay (LC50 > 1000 µg/mL). Ingredients E2, E3, and E4 generated low lipoperoxides' concentrations and high antioxidant capacity during the oral-gastric stage. The 25 min-gastric phase showed the highest antioxidant capacity and low lipoperoxidation. Results suggested avocado seed-derived could be used to develop functional ingredients with nutraceutical properties.

Optimization of Bauhinia parviflora biodiesel production for higher yield and its compatibility assessment with water and Di-tert-butyl peroxide emulsion.

The current study aims to attain a higher yield of biodiesel from Bauhinia tree seed wastes through process optimization using response surface methodology (RSM) and assess its compatibility in the diesel engine blended with water and Di-tert-butyl peroxide (DTBP). The Bauhinia parviflora biodiesel (BPB) transesterification originated using a fixed quantity of catalyst, and the transesterification process parameters such as oil-molar ratio (OMR), process temperature (PT), and reaction time (RT) were optimized. Fourier transform infrared spectroscopy (FTIR) and Gas chromatography-mass spectrometry (GC-MS)analysis were applied to characterize and quantify the BPB, and ASTM standards were followed to measure the properties. The prepared BPB (30%) was blended with 10% water and 2% BTBP to enhance the performance and emission characteristics of the BPB in the diesel engine. The optimization result implies that the higher yield of BPB (91.4%) was attained for OMR of 9.2:1, PT of 76 °C, and RT of 67 min. The FTIR report indicates that the carbon-based components are pretty good in the prepared BPB. The GC-MS report indicates that the fatty acids are converted into corresponding methyl esters, and the measured fuel properties are within the prescribed limits. The diesel engine's performance is effectively improved for the BPB blended with water and DTBP. The proposed fuel's overall improvement in hydrocarbon, carbon monoxide, smoke, and oxides of nitrogen emissions is 27.2%, 34.9%, 16.7%, and 11.2%, respectively.

Supplement Individual Article: A Reappraisal of Fixed-Combination Halobetasol Propionate and Tazarotene for the Treatment of Psoriasis: Biological Underpinnings, Therapeutic Mechanisms, and Economic Considerations.

Psoriasis is a complex inflammatory disease, which can be triggered by the interplay among keratinocytes, various immune cells, and even dermal vascular endothelial cells. Understanding of the key players and cytokine/chemokine messengers involved in the initiation and maintenance of psoriasis has significantly evolved and led to numerous systemic biologic therapies targeting those specific components. These therapies, despite their successes, do not ubiquitously affect all pathogenic cellular pathways. They also carry their risks and may be contraindicated in certain patient populations. Therefore, other therapeutics are still necessary. Tazarotene, a decades-old topical retinoid, has been successfully used for treating cutaneous psoriasis. Its retinoid effect via binding to retinoic acid receptors (RAR)/retinoic X receptors (RXR) alters cellular gene expression of numerous pathogenic cells and leads to a long-standing maintenance effect despite discontinuation - a phenomenon known as remittance. Concurrent use of tazarotene with topical corticosteroids results in reduced incidence of treatment-related adverse events. A fixed-combination lotion containing halobetasol propionate (HP) and tazarotene (HP 0.01%/TAZ 0.045%, Duobrii, Ortho Dermatologics) was developed implementing polymeric emulsion technology that demonstrates efficacy in psoriasis while mitigating adverse events associated with each component alone as monotherapy. In this paper, we review the pathogenesis of psoriasis and illuminate the effect of tazarotene and HP on key cellular pathways. In addition, we review the clinical efficacy of fixed-combination HP 0.01%/TAZ 0.045% lotion in psoriasis as well as its long-term treatment maintenance, applicability in skin of color, and beneficial economic impact for patients and healthcare stakeholders. As HP 0.01%/TAZ 0.045% lotion is safe and exhibits excellent efficacy, it should be within the therapeutic toolbox for every psoriasis patient.J Drugs Dermatol. 2023;22:1(Suppl 1):s3-10.

Fabrication, assessment, and optimization of alendronate sodium nanoemulsion-based injectable in-situ gel formulation for management of osteoporosis.

Low bone mass, degeneration of bone tissue, and disruption of bone microarchitecture are all symptoms of the disease osteoporosis, which can decrease bone strength and increase the risk of fractures. The main objective of the current study was to use a phospholipid-based phase separation in-situ gel (PPSG) in combination with an alendronate sodium nanoemulsion (ALS-NE) to help prevent bone resorption in rats. The effect of factors such as concentrations of the ALS aqueous solution, surfactant Plurol Oleique CC 497, and Maisine CC oil on nanoemulsion characteristics such as stability index and globular size was investigated using an l-optimal coordinate exchange statistical design. Injectable PPSG with the best nanoemulsion formulation was tested for viscosity, gel strength, water absorption, and in-vitro ALS release. ALS retention in the rats' muscles was measured after 30 days. The droplet size and stability index of the optimal nanoemulsion were 90 ± 2.0 nm and 85 ± 1.9%, respectively. When mixed with water, the optimal ALS-NE-loaded PPSG became viscous and achieved 36 seconds of gel strength, which was adequate for an injectable in-situ formulation. In comparison with the ALS solution-loaded in-situ gel, the newly created optimal ALS-NE-loaded PPSG produced the sustained and regulated release of ALS; hence, a higher percentage of ALS remained in rats' muscles after 30 days. PPSG that has been loaded with an ALS-NE may therefore be a more auspicious, productive, and effective platform for osteoporosis treatment than conventional oral forms.

Production of salad dressings via the use of economically prepared cellulose nanofiber from lime residue as a functional ingredient.

Production of cellulose nanofiber (CNF) via the use of a more economical and less energy-intensive means is desirable. Once formed, it is necessary to determine whether or not the prepared CNF would be capable of forming a Pickering emulsion as in the case of traditionally prepared nanofiber. In the present study, oil-in-water emulsions, namely, salad dressings, with CNF as a functional ingredient, were prepared. Lime residue powder as the source of dietary fiber was subject to high-shear homogenization to form CNF suspension, which was then mixed with other ingredients. Different contents of fat (20%-40%), egg yolk (0%-4%), and lime residue powder (0%-4%) were tested. The formed CNF successfully acted as a Pickering emulsifier and allowed the production of salad dressings with desirable characteristics at 30%-40% fat, 2% egg yolk, and 2% lime residue powder. The dressings exhibited adequate physicochemical properties and remained stable throughout the storage period of 28 days. PRACTICAL APPLICATION: The presently proposed means would allow the industry to produce cellulose nanofiber (CNF) in a more economical and less energy-intensive manner. The so-produced CNF exhibits comparable properties as traditionally prepared nanofiber and can be used as a stabilizer in food emulsions.

Safety Assessment of Starch Nanoparticles as an Emulsifier in Human Skin Cells, 3D Cultured Artificial Skin, and Human Skin.

Emulsion systems are widely used in various industries, including the cosmetic, pharmaceutical, and food industries, because they require emulsifiers to stabilize the inherently unstable contact between oil and water. Although emulsifiers are included in many products, excessive use of emulsifiers destroys skin barriers and causes contact dermatitis. Accordingly, the consumer demand for cosmetic products made from natural ingredients with biocompatibility and biodegradability has increased. Starch in the form of solid nanosized particles is considered an attractive emulsifier that forms and stabilizes Pickering emulsion. Chemical modification of nanosized starch via acid hydrolysis can effectively provide higher emulsion stability. However, typical acid hydrolysis limits the industrial application of starch due to its high time consumption and low recovery. In previous studies, the effects of starch nanoparticles (SNPs) prepared by treatment with acidic dry heat, which overcomes these limitations, on the formation and stability of Pickering emulsions were reported. In this study, we evaluated the safety of SNPs in skin cell lines, 3D cultured skin, and human skin. We found that the cytotoxicity of SNPs in both HaCaT cells and HDF cells could be controlled by neutralization. We also observed that SNPs did not induce structural abnormalities on 3D cultured skin and did not permeate across micropig skin tissue or human skin membranes. Furthermore, patches loaded with SNPs were found to belong in the "No irritation" category because they did not cause any irritation when placed on human skin. Overall, the study results suggest that SNPs can be used as a safe emulsifier in various industries, including in cosmetics.

Encapsulation of cannabidiol in oil-in-water nanoemulsions and nanoemulsion-filled hydrogels: A structure and biological assessment study.

HYPOTHESIS: Lipophilic cannabidiol can be solubilized in oil-in water nanoemulsions, which can then be impregnated into chitosan hydrogels forming another colloidal system that will facilitate cannabidiol's release. The delivery from both systems was compared, alongside structural and biological studies, to clarify the effect of the two carriers' structure on the release and toxicity of the systems. EXPERIMENTS: Oil-in-water nanoemulsions (NEs) and the respective nanoemulsion-filled chitosan hydrogels (NE/HGs) were formulated as carriers of cannabidiol (CBD). Size, polydispersity and stability of the NEs were evaluated and then membrane dynamics, shape and structure of both systems were investigated with EPR spin probing, SAXS and microscopy. Biocompatibility of the colloidal delivery systems was evaluated through cytotoxicity tests over normal human skin fibroblasts. An ex vivo permeation protocol using porcine ear skin was implemented to assess the release of CBD and its penetration through the skin. FINDINGS: Incorporation of the NEs in chitosan hydrogels does not significantly affect their structural properties as evidenced through SAXS, EPR and confocal microscopy. These findings indicate the successful development of a novel nanocarrier that preserves the NE structure with the CBD remaining encapsulated in the oil core while providing new rheological properties advantageous over NEs. Moreover, NE/HGs proved to be more efficient as a carrier for the release of CBD. Cell viability assessment revealed high biocompatibility of the proposed colloids.

Assessment of hydrophobic-ion paired insulin incorporated SMEDDS for the treatment of diabetes mellitus.

To overcome the low oral bioavailability of insulin, we hypothesized that the insulin-hydrophobic ion pairing (HIP) complex incorporated self-microemulsifying drug delivery system (SMEDDS) would be beneficial. In the present study, an oral insulin delivery system was developed and estimated using the HIP technique and SMEDDS. Further insulin-HIP complexes were characterized using various spectroscopical techniques. Additionally, insulin-HIP complexes were subjected to analysis of complexes' conformational stability in the real physiological solution using computational approaches. On the other hand, in vitro, and in vivo studies were carried out to investigate the permeability and hypoglycemic effect. Subsequently, in an in vitro non-everted gut sac study, the apparent permeability coefficient (Papp) was approximately 8-fold higher in the colon than in the jejunum, and the HIP-incorporated SMEDDS showed an approximately 3-fold higher Papp value than the insulin solution. The hypoglycemic effect after in situ colon instillation, the HIP complex between insulin and sodium docusate-incorporated SMEDDS showed a pharmacological availability of 2.52 ± 0.33 % compared to the subcutaneously administered insulin solution. Thus, based on these outcomes, it can be concluded that the selection of appropriate counterions is important in developing HIP-incorporated SMEDDS, wherein this system shows promise as a tool for oral peptide delivery systems.

Recent advances in bioactive nanocrystal-stabilized Pickering emulsions: Fabrication, characterization, and biological assessment.

Numerous literatures have shown the advantages of Pickering emulsion (PE) for the delivery of bioactive ingredients in the fields of food, medicine, and cosmetics, among others. On this basis, the multi-loading mode of bioactives (internal phase encapsulation and/or loading at the interface) in small molecular bioactives nanocrystal-stabilized PE (BNC-PE) enables them higher loading efficiencies, controlled release, and synergistic or superimposed effects. Therefore, BNC-PE offers an efficacious delivery system. In this review, we briefly summarize BNC-PE fabrication and characterization, with a focus on the processes of possible evolution and absorption of differentially applied BNC-PE when interacting with the body. In addition, methods of monitoring changes and absorption of BNC-PE in vivo, from the nanomaterial perspective, are also introduced. The purpose of this review is to provide an accessible and comprehensive methodology for the characterization and evaluation of BNC-PE after formulation and preparation, especially in relation to biological assessment and detailed mechanisms throughout the absorption process of BNC-PE in vivo.

Pickering emulsion-enhanced Vibrio fischeri assay for ecotoxicity assessment of highly hydrophobic polycyclic aromatic hydrocarbons.

Accurate ecotoxicity assessment of contaminated soil is critical to public health, and the luminescent bacteria (Vibrio fischeri) method is the most commonly used. Hydrophobic compounds such as polycyclic aromatic hydrocarbons (PAHs) in soil cannot be in contact with luminescent bacteria due to their low water solubility so that the luminescence inhibitory effect cannot be observed. The underestimated biological toxicity makes the test unreliable and en-dangers public health and safety. The commonly adopted improved method of adding cosolvents has limited effect, it was only effective for low-hydrophobicity chemicals and could not be used for ecotoxicity evaluation of high-hydrophobicity chemicals. Therefore, we constructed Pickering emulsions using luminescent bacteria modified with n-dodecanol in which PAHs were dissolved in the oil phase, n-tetradecane. Then the luminescent bacteria could tightly adhere to the oil-water interface and contact PAHs. As a result, their bioluminescence was suppressed to varying degrees depending on the chemical species and concentrations. With no solubility limitation, highly hydrophobic PAHs could even completely inhibit bacterial bioluminescence, hence the toxicity information was accurately displayed and the median effect concentration (EC50) values could be calculated. This Pickering emulsion-based method was successfully applied for the accurate ecotoxicity evaluation of highly hydrophobic PAHs and soil samples contaminated with them, which all previous methods could not achieve. This method overcomes the problem of ecotoxicity evaluation of hydrophobic compounds, and has great potential for practical application, whether it is pure chemicals or various real samples from the ecological environment.

A latanoprost cationic emulsion (STN1013001) vs. other latanoprost formulations (Latanoprost) in open angle glaucoma/ocular hypertension and ocular surface disease: an Italian cost-utility analysis.

BACKGROUND: STN1013001 is an innovative latanoprost cationic emulsion for open-angle glaucoma/ocular hypertension (OAG/OHT) and ocular surface disease (OSD). METHODS AND FINDINGS: A 5-year, 7 health states, 1-year cycle early Markov model-supported cost-utility analysis (CUA) of STN1013001 vs. other latanoprost formulations (Latanoprost) followed the Italian National Health Service (INHS) perspective.One-way, probabilistic and scenario sensitivity analyses tested the uncertainty of the baseline results. Value of information analysis (VOIA) investigated the potential cost-effectiveness of collecting further evidence. RESULTS: Over 5 years, the Markov model-supported CUA predicts STN1013001 to be potentially highly cost-effective vs. Latanoprost (+€57.60 cost at €2020 values; +0.089 Quality-Adjusted Life Years).The Incremental Cost-Utility Ratio (€647.65) falls well below the lower limit of the acceptability range proposed for Italy (€25,000-€40,000).Sensitivity analyses confirmed the robustness of the baseline findings. VOIA highlighted that further information might only be cost-effective for OAG/OHT utilities and OSD-related disutility. CONCLUSION: STN1013001 is potentially highly cost-effective and strongly dominant vs. Latanoprost for OAG/OHT+OSD patients from the INHS perspective. These findings should be re-assessed using the data from the ongoing Phase III trial (NCT04133311) comparing the efficacy and safety of STN1013001 vs. Latanoprost and with future real-world CUAs upon the availability of STN1013001 on the Italian market.

Neem Oil or Almond Oil Nanoemulsions for Vitamin E Delivery: From Structural Evaluation to in vivo Assessment of Antioxidant and Anti-Inflammatory Activity.

Purpose: Vitamin E (VitE) may be classified in "the first line of defense" against the formation of reactive oxygen species. Its inclusion in nanoemulsions (NEs) is a promising alternative to increase its bioavailability. The aim of this study was to compare O/W NEs including VitE based on Almond or Neem oil, showing themselves antioxidant properties. The potential synergy of the antioxidant activities of oils and vitamin E, co-formulated in NEs, was explored. Patients and Methods: NEs have been prepared by sonication and deeply characterized evaluating size, ζ-potential, morphology (TEM and SAXS analyses), oil nanodroplet feature, and stability. Antioxidant activity has been evaluated in vitro, in non-tumorigenic HaCaT keratinocytes, and in vivo through fluorescence analysis of C. elegans transgenic strain. Moreover, on healthy human volunteers, skin tolerability and anti-inflammatory activity were evaluated by measuring the reduction of the skin erythema induced by the application of a skin chemical irritant (methyl-nicotinate). Results: Results confirm that Vitamin E can be formulated in highly stable NEs showing good antioxidant activity on keratinocyte and on C. elegans. Interestingly, only Neem oil NEs showed some anti-inflammatory activity on healthy volunteers. Conclusion: From the obtained results, Neem over Almond oil is a more appropriate candidate for further studies on this application.

Meloxicam loaded hydroxypropyl methylcellulose (HPMC) microparticulate: Fabrication, characterization and in vivo pharmacokinetic assessment.

Meloxicam (MEL) is an oxicam derivative with low water solubility that is useful in the treatment of colorectal cancer (CRC) as a COX-2 inhibitor. MEL-loaded HPMC micro particles were fabricated using an oil-in-oil (o/o) emulsion solvent evaporation (ESE) method. FTIR, XRD, particle size analysis, DSC, SEM and in vitro dissolution investigation were utilized to evaluate the produced micro particles physiochemically. Finally, rabbits were used as animal models in an in vivo pharmacokinetic study to assess the MEL concentration in the plasma of rabbits. Pure MEL, F1 and F2 were given to rabbits by a single dose for in vivo pharmacokinetic investigations. The XRD and DSC results confirmed the transformation of MEL from its crystalline nature to the amorphous state in micro particles. The formulations F1 and F2 particle sizes were determined 92.43µm and 163.26µm, respectively. The prepared micro particles had a smooth, non-porous and spherical surface. In comparison to the pure drug (22.4%), the F1 and F2 cumulative drug release (%) was 86.19% and 79.57%, respectively. Pure MEL, F1 and F2 have estimated Cmax values of 7.21, 25.41 and 22.38µg/mL, respectively. MEL had a half-life of 19.98 hours, which rose to 22.19 hours and 24.75 hours for F1 and F2, respectively. MEL, F1 and F2 had AUC0-α values of 116.034, 445.95 and 462.72µg/mL*h, respectively. Considering these aspects, MEL-loaded HPMC micro particles may have the potential to better the delivery and control the release of drug that is not easily dissolved in water which could lead to improved therapeutic efficacy and limited side effects.

Biomolecules from Serratia sp. CS1 indigenous to Ethiopian natural alkaline lakes: biosurfactant characteristics and assessment of compatibility in a laundry detergent.

In this study, the biosurfactants (Bio-SFs) producing bacteria are screened from the selected alkaline lake of Ethiopia, and the potential bacterial strain and their produced Bio-SFs are further characterized. In an initial screening, 25 bacterial isolates were isolated, and among those, the bacterial isolate assigned as CS1 was identified as the most potent producer of Bio-SFs using a subsequent characterization process. The CS1 strain was identified as Serratia sp. via biochemical and molecular methods. An emulsion index (E24) of 69.06 ± 0.11% was obtained for CS1 after 5 days of incubation time at 30 °C. The CS1-extracted Bio-SFs were characterized by Fourier transform infrared (FTIR), and it indicated that the type of biosurfactant produced was a glycolipid. The stability of the crude Bio-SFs was characterized, and the optimal conditions were found to be 80 °C, pH 8, and 3% NaCl, respectively. The extracted Bio-SFs were compatible with tested commercial detergents, and its efficiency increased from 12.2 ± 0.1% to 67.1 ± 0.17% and 70.43 ± 0.11% when combined with commercially available detergent brands in Ethiopia such as Taza and Largo, respectively. This study suggests that the isolated S. marcescens CS1 strain has the potential to produce Bio-SFs that are viable competence to replace the use of synthetic chemicals in the production of commercial detergents.

Cost-Effective Control of Molecular Weight in Ultrasound-Assisted Emulsion Polymerization of Styrene.

This paper focuses on the determination of economically most feasible conditions to obtain polystyrene with various target molecular weights through ultrasound-assisted emulsion polymerization. Briefly, batch polymerizations of styrene have been performed by ultrasound-assisted emulsion polymerization process using different reaction feed compositions. Polymerization rates were calculated using the monomer conversions at various reaction times. Also, molecular weights of the synthesized polymers, as well as the Mark-Houwink constants, were determined by intrinsic viscosity and gel permeation chromatography measurements. It was found that the polydispersity index of the polymers is ranging from 1.2 to 1.5, and the viscosity average molecular weights are in between 100000-1500000 g/mol depending on the reaction conditions. Finally, model equations were also developed for response variables, and the most economical ways of reaching various target molecular weights were interpreted by response surface methodology based multi objective optimization.

Hybrid emulsifier systems: Alkyl imidazolium lactoside surfactants derived from natural resources.

A new series of hybrid surfactants comprising an imidazolium as a cation and a disaccharide as a non-ion were synthesized, and their aggregation behavior was also investigated. The synthetic approach used alkylation as an easily accessible route on an imidazole to attempt an economic production followed by coupling with bromoethyl lactoside to form lacto-imidazolium salts surfactants. The coupled surfactants were obtained in almost quantitative yield over several steps. The surfactant surface properties in aqueous media were investigated, including critical micelle concentration (CMC), Krafft temperature, and emulsion stability were studied. The CMC measurements of the alkyl imidazolium lactoside surfactants are significantly lower than normal imidazolium surfactants, while the emulsion investigations encourage the use of alkyl imidazolium lactoside surfactants owing to stabilized assemble behavior as good as APGs.