Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and lateral flow immunochromatography for rapid identification of ß-lactamase-gene-harboring Enterobacterales in urine specimens: Performance and cost-benefit analyses.

In this single-center prospective study, we evaluated the performance to the MALDI-ToF MS based method in conjunction with lateral flow immunochromatographic (LFIC) in urine specimens for rapid diagnosis of bacterial Urinary Tract Infection (UTI) and detection of carbapenemase and/or extended-spectrum ß- lactamase (ESBL) enzymes produced by the involved bacteria, compared to standard culture, and antimicrobial susceptibility testing/genotypic resistance markers characterization performed on culture-grown colonies. In addition, a cost-benefit analysis comparing this approach against standard procedures was conducted. A total of 324 urines were included in the study, of which 288 (88.9 %) yielded concordant results by the MALDI-ToF MS and conventional culture (Kappa agreement, 0.82; P<0.001). Direct LFIC testing could be carried out in 249/324 urines. Bacterial species carrying ß-lactam genotypic resistance markers were identified in 35 urines (35 CTX-M and 2 OXA-48). Two ESBL-producing Escherichia coli were missed by LFIC (Kappa agreement with standard procedures of 0.96; P<0.001). The cost-benefit analysis indicated that our novel approach resulted in an improvement of clinical outcomes (less need of outpatient care) with a marginal incremental cost (€2.59).

Rapid RNase inhibitor production to enable low-cost, on-demand cell-free protein synthesis biosensor use in human body fluids.

Human body fluids contain biomarkers which are used extensively for prognostication, diagnosis, monitoring, and evaluation of different treatments for a variety of diseases and disorders. The application of biosensors based on cell-free protein synthesis (CFPS) offers numerous advantages including on-demand and at-home use for fast, accurate detection of a variety of biomarkers in human fluids at an affordable price. However, current CFPS-based biosensors use commercial RNase inhibitors to inhibit different RNases present in human fluids and this reagent is approximately 90% of the expense of these biosensors. Here the flexible nature of Escherichia coli-lysate-based CFPS was used for the first time to produce murine RNase Inhibitor (m-RI) and to optimize its soluble and active production by tuning reaction temperature, reaction time, reduced potential, and addition of GroEL/ES folding chaperons. Furthermore, RNase inhibition activity of m-RI with the highest activity and stability was determined against increasing amounts of three human fluids of serum, saliva, and urine (0%-100% v/v) in lyophilized CFPS reactions. To further demonstrate the utility of the CFPS-produced m-RI, a lyophilized saliva-based glutamine biosensor was demonstrated to effectively work with saliva samples. Overall, the use of CFPS-produced m-RI reduces the total reagent costs of CFPS-based biosensors used in human body fluids approximately 90%.

Edge expansion parallel cascade selection molecular dynamics simulation for investigating large-amplitude collective motions of proteins.

We propose edge expansion parallel cascade selection molecular dynamics (eePaCS-MD) as an efficient adaptive conformational sampling method to investigate the large-amplitude motions of proteins without prior knowledge of the conformational transitions. In this method, multiple independent MD simulations are iteratively conducted from initial structures randomly selected from the vertices of a multi-dimensional principal component subspace. This subspace is defined by an ensemble of protein conformations sampled during previous cycles of eePaCS-MD. The edges and vertices of the conformational subspace are determined by solving the "convex hull problem." The sampling efficiency of eePaCS-MD is achieved by intensively repeating MD simulations from the vertex structures, which increases the probability of rare event occurrence to explore new large-amplitude collective motions. The conformational sampling efficiency of eePaCS-MD was assessed by investigating the open-close transitions of glutamine binding protein, maltose/maltodextrin binding protein, and adenylate kinase and comparing the results to those obtained using related methods. In all cases, the open-close transitions were simulated in ∼10 ns of simulation time or less, offering 1-3 orders of magnitude shorter simulation time compared to conventional MD. Furthermore, we show that the combination of eePaCS-MD and accelerated MD can further enhance conformational sampling efficiency, which reduced the total computational cost of observing the open-close transitions by at most 36%.

Rapid Assessment of Water Toxicity by Plasmonic Nanomechanical Sensing.

The ability to rapidly and accurately detect water toxicity is crucial for monitoring water quality and assessing toxic risk, but such detection remains a great challenge. Here, we present a plasmonic nanomechanical sensing (PNMS) system for the rapid assessment of water toxicity. This technique is based on the plasmonic sensing of the nanomechanical movement of single bacterial cells, which could be inhibited upon exposure to potential toxicants. By correlating the amplitude of nanomechanical movement with bacterial activity, we detected a variety of toxic substances in water. The direct readout of bacterial activity via PNMS allowed for a high sensitivity to toxicants in water, thereby enabling us to evaluate the acute toxicological effect of chemical compounds rapidly. The PNMS method is promising for online alerts of water quality safety and for assessing chemical hazards. We anticipate that PNMS is also suitable for a wide range of other applications, including bacterial detection and high-throughput screening of antibacterial materials.

SAXSDom: Modeling multidomain protein structures using small-angle X-ray scattering data.

Many proteins are composed of several domains that pack together into a complex tertiary structure. Multidomain proteins can be challenging for protein structure modeling, particularly those for which templates can be found for individual domains but not for the entire sequence. In such cases, homology modeling can generate high quality models of the domains but not for the orientations between domains. Small-angle X-ray scattering (SAXS) reports the structural properties of entire proteins and has the potential for guiding homology modeling of multidomain proteins. In this article, we describe a novel multidomain protein assembly modeling method, SAXSDom that integrates experimental knowledge from SAXS with probabilistic Input-Output Hidden Markov model to assemble the structures of individual domains together. Four SAXS-based scoring functions were developed and tested, and the method was evaluated on multidomain proteins from two public datasets. Incorporation of SAXS information improved the accuracy of domain assembly for 40 out of 46 critical assessment of protein structure prediction multidomain protein targets and 45 out of 73 multidomain protein targets from the ab initio domain assembly dataset. The results demonstrate that SAXS data can provide useful information to improve the accuracy of domain-domain assembly. The source code and tool packages are available at https://github.com/jianlin-cheng/SAXSDom.

Low-concentration trypsin detection from a metal-enhanced fluorescence (MEF) platform: Towards the development of ultra-sensitive and rapid detection of proteolytic enzymes.

Proteolytic enzymes, which serve to degrade proteins to their amino acid building blocks, provide a distinct challenge for both diagnostics and biological research fields. Due to their ubiquitous presence in a wide variety of organisms and their involvement in disease, proteases have been identified as biomarkers for various conditions. Additionally, low-levels of proteases may interfere with biological investigation, as contamination with these enzymes can physically alter the protein of interest to researchers, resulting in protein concentration loss or subtler polypeptide clipping that leads to a loss of functionality. Low levels of proteolytic degradation also reduce the shelf-life of commercially important proteins. Many detection platforms have been developed to achieve low-concentration or low-activity detection of proteases, yet many suffer from limitations in analysis time, label stability, and ultimately sensitivity. Herein we demonstrate the potential utility of fluorescein derivatives as fluorescent labels in a new, turn-off enzymatic assay based on the principles of metal-enhanced fluorescence (MEF). For fluorescein sodium salt alone on nano-slivered 96-well plates, or Quanta Plates™, we report up to 11,000x enhancement for fluorophores within the effective coupling or enhancement volume region, defined as ~100 nm from the silver surface. We also report a 9% coefficient of variation, and detection on the picomolar concentration scale. Further, we demonstrate the use of fluorescein isothiocyanate-labeled YebF protein as a coating layer for a MEF-based, Quanta Plate™ enzymatic activity assay using trypsin as the model enzyme. From this MEF assay we achieve a detection limit of ~1.89 ng of enzyme (2.8 mBAEE activity units) which corresponds to a minimum fluorescence signal decrease of 10%. The relative success of this MEF assay sets the foundation for further development and the tuning of MEF platforms for proteolytic enzyme sensing not just for trypsin, but other proteases as well. In addition, we discuss the future development of ultra-fast detection of proteases via microwave-accelerated MEF (MAMEF) detection technologies.

Biosynthetic production of fully carbon-13 labeled retinal in E. coli for structural and functional studies of rhodopsins.

The isomerization of a covalently bound retinal is an integral part of both microbial and animal rhodopsin function. As such, detailed structure and conformational changes in the retinal binding pocket are of significant interest and are studied in various NMR, FTIR, and Raman spectroscopy experiments, which commonly require isotopic labeling of retinal. Unfortunately, the de novo organic synthesis of an isotopically-labeled retinal is complex and often cost-prohibitive, especially for large scale expression required for solid-state NMR. We present the novel protocol for biosynthetic production of an isotopically labeled retinal ligand concurrently with an apoprotein in E. coli as a cost-effective alternative to the de novo organic synthesis. Previously, the biosynthesis of a retinal precursor, ß-carotene, has been introduced into many different organisms. We extended this system to the prototrophic E. coli expression strain BL21 in conjunction with the inducible expression of a ß-dioxygenase and proteo-opsin. To demonstrate the applicability of this system, we were able to assign several new carbon resonances for proteorhodopsin-bound retinal by using fully 13C-labeled glucose as the sole carbon source. Furthermore, we demonstrated that this biosynthetically produced retinal can be extracted from E. coli cells by applying a hydrophobic solvent layer to the growth medium and reconstituted into an externally produced opsin of any desired labeling pattern.

Cost-effective production of recombinant peptides in Escherichia coli.

Among bioactive peptides, cationic antimicrobial peptides (AMPs), also referred to as host defence peptides (HDPs), are valuable tools to treat infections, being able to kill a wide variety of microbes directly and/or modulate host immunity. HDPs have great therapeutic potential against antibiotic-resistant bacteria, viruses and even parasites. However, high manufacturing costs have greatly limited their development as drugs, thus highlighting the need to develop novel and competitive production strategies. Here, a cost-effective procedure was established to produce the high amounts of peptides required for basic and clinical research. Firstly, a novel culture medium was designed, which was found to support significantly higher cell densities and recombinant expression levels of peptides under test compared to conventional media. The procedure has been also efficiently scaled up by using a 5 L fermenter, while the costs have been lowered significantly by developing a successful auto-induction strategy, which has been found to support higher yields of target constructs and cell biomass compared to conventional strategies based on expression induction by IPTG. Interestingly, it was estimated that by increasing production scale from 100 to 1000 mg/batch, unit costs decreased strongly from 253 to 42 €/mg. These costs appear highly competitive when compared to chemical synthesis strategies. Altogether, the data indicate that the strategy represents an important starting point for the future development of large-scale manufacture of HDPs.

An efficient, step-economical strategy for the design of functional metalloproteins.

The bottom-up design and construction of functional metalloproteins remains a formidable task in biomolecular design. Although numerous strategies have been used to create new metalloproteins, pre-existing knowledge of the tertiary and quaternary protein structure is often required to generate suitable platforms for robust metal coordination and activity. Here we report an alternative and easily implemented approach (metal active sites by covalent tethering or MASCoT) in which folded protein building blocks are linked by a single disulfide bond to create diverse metal coordination environments within evolutionarily naive protein-protein interfaces. Metalloproteins generated using this strategy uniformly bind a wide array of first-row transition metal ions (MnII, FeII, CoII, NiII, CuII, ZnII and vanadyl) with physiologically relevant thermodynamic affinities (dissociation constants ranging from 700 nM for MnII to 50 fM for CuII). MASCoT readily affords coordinatively unsaturated metal centres-including a penta-His-coordinated non-haem Fe site-and well-defined binding pockets that can accommodate modifications and enable coordination of exogenous ligands such as nitric oxide to the interfacial metal centre.

Price of disorder in the lac repressor hinge helix.

The Lac system of genes has been pivotal in understanding gene regulation. When the lac repressor protein binds to the correct DNA sequence, the hinge region of the protein goes through a disorder to order transition. The structure of this region of the protein is well understood when it is in this bound conformation, but less so when it is not. Structural studies show that this region is flexible. Our simulations show this region is extremely flexible in solution; however, a high concentration of salt can help kinetically trap the hinge helix. Thermodynamically, disorder is more favorable without the DNA present.

Introducing a cost-effective method for purification of bioactive flagellin from several flagellated gram-negative bacteria.

The objective of this study was to introduce a simple and cheap method for purification of flagellin. So, flagellin proteins of Salmonella typhimurium (S. typhimurium), Escherichia coli (E. coli), Citrobacter freundii (C. freundii) and Salmonella typhi (S. typhi) were purified by a modified simple method. Bacterial cultures were precipitated by centrifugation. Precipitates were washed twice and flagellin proteins were detached by shaking vigorously (in PBS pH = 2), and then flagellin proteins were precipitated by ammonium sulfate saturation. Evaluation of purification efficiency and concentration were examined by SDS-PAGE and Bradford assay. Polyclonal antibodies were produced against S. typhimurium FliC and cross-reactivity of anti-S. typhimurium was assessed against other flagellins. Bioactivity of flagellins was evaluated by cell proliferation and IL-8 protein expression assay in HEK293 cells, and also, IL-6 and TNF-α genes expression in chicken cells. Results showed a single band for flagellin proteins of all bacteria on %10 SDS-PAGE, which concentration ranged from 150 to 400 µg/mL. All flagellin proteins increased cell proliferation, and IL-8 levels were increased after treatment by flagellins and levels of IL-6 and TNF-α were increased after treatment with S. typhimurium FliC. All flagellin proteins showed cross-reactivity with antibodies. Findings showed that application of our method, not only reduced time and cost, but also, the purified flagellin proteins had acceptable bioactivity.

An efficient method for FITC labelling of proteins using tandem affinity purification.

Fluorescence-based assays are extremely diverse, sensitive and robust experimental methods for investigating the conformational changes, enzyme kinetics, dynamics and molecular interactions. A prerequisite for most of these experimental approaches is to label the protein of interest with one or more extrinsic fluorophores with desired photophysical properties. Fluorescein isothiocyanate (FITC), due to its high quantum efficiency and conjugate stability, is most widely used fluorescence labelling reagent for such experimental approaches. However, the bottlenecks in this labelling reaction is requirement of high protein concentration, maintenance of protein stability during the labelling process as well as high background fluorescence due to ineffective removal of unreacted FITC, prior to fluorescence studies. Therefore, to overcome these inadequacies or limitations, we have modified the existing protocol by introducing tandem affinity purification tags at the N- and C-terminus of target protein. Using this modified method, we have efficiently labelled target protein with significant decrease in precipitation, degradation and background fluorescence of unreacted FITC. This facile and rapid technique may also be used as a basis for labelling procedures with other fluorophores and hence has a broad application in spectroscopic studies.

Preparation of gold nanoparticles supported on graphene oxide with flagella as the template for nonenzymatic hydrogen peroxide sensing.

Gold nanoparticles supported on graphene oxide with flagella as the template were developed as an electrochemical sensor for the detection of hydrogen peroxide (H2O2) in serum. The flagella-Au nanoparticles composite and graphene oxide were dropped onto a glassy carbon electrode (GCE) to form a new H2O2 electrochemical sensor. The structure morphology of the prepared sensor was characterized by transmission electron microscopy (TEM), and the electrocatalytic performance towards H2O2 reduction was evaluated by cyclic voltammetry (CV) and amperometric methods. The response current of the sensor showed a good linear relationship with the concentration of H2O2 in the range of 10-1000 µM (R2 = 0.9916). The minimum detection limit of 1 µM was obtained (S/N = 3). Finally, the sensor was applied to the detection of H2O2 in serum, and the recoveries were satisfactory. As the sensor is sensitive, fast, and easy to make, it is expected to be used for rapid detection of H2O2. Graphical abstract ᅟ.

Conformational Dynamics of thiM Riboswitch To Understand the Gene Regulation Mechanism Using Markov State Modeling and the Residual Fluctuation Network Approach.

Thiamine pyrophosphate (TPP) riboswitch is a cis-regulatory element in the noncoding region of mRNA. The aptamer domain of TPP riboswitch detects the high abundance of coenzyme thiamine pyrophosphate (TPP) and modulates the gene expression for thiamine synthetic gene. The mechanistic understanding in recognition of TPP in aptamer domain and ligand-induced compactness for folding of expression platform are most important to designing novel modulators. To understand the dynamic behavior of TPP riboswitch upon TPP binding, molecular dynamics simulations were performed for 400 ns in both apo and TPP bound forms of thiM riboswitch from E. coli and analyzed in terms of eRMSD-based Markov state modeling and residual fluctuation network. Markov state models show good correlations in transition probability among metastable states from simulated trajectory and generated models. Structural compactness in TPP bound form is observed which is correlated with SAXS experiment. The importance of junction of P4 and P5 is evident during dynamics, which correlates with FRET analysis. The dynamic nature of two sensor forearms is due to the flexible P1 helix, which is its intrinsic property. The transient state in TPP-bound form was observed in the Markov state model, along with stable states. We believe that this transient state is responsible to assist the influx and outflux of ligand molecule by creating a solvent channel around the junction region of P4 and P5 and such a structure was anticipated in FRET analysis. The dynamic nature of riboswitch is dependent on the interaction between residues on distal loops L3 and L5/P3 and junction P4 and P5, J3/2 which stabilize the J2/4. It helps in the transfer of allosteric information between J2/4 and P3/L5 tertiary docking region through the active site residues. Understanding such information flow will benefit in highlighting crucial residues in highly dynamic and kinetic systems. Here, we report the residues and segments in riboswitch that play vital roles in providing stability and this can be exploited in designing inhibitors to regulate the functioning of riboswitches.

N6-Methylation Assessment in Escherichia coli 23S rRNA Utilizing a Bulge Loop in an RNA-DNA Hybrid.

We propose a sequence-selective assay of N6-methyl-adenosine (m6A) in RNA without PCR or reverse transcription, by employing a hybridization assay with a DNA probe designed to form a bulge loop at the position of a target modified nucleotide. The m6A in the bulge in the RNA-DNA hybrid was assumed to be sufficiently mobile to be selectively recognized by an anti-m6A antibody with a high affinity. By employing a surface-plasmon-resonance measurement or using a microtiter-plate immunoassay method, a specific m6A in the Escherichia coli 23S rRNA sequence could be detected at the nanomolar level when synthesized and purified oligo-RNA fragments were used for measurement. We have successfully achieved the first selective detection of m6A2030 specifically in 23S rRNA from real samples of E. coli total RNA by using our immunochemical approach.

Problems analysis and new fabrication strategies of mediated electrochemical biosensors for wastewater toxicity assessment.

Conventional mediated electrochemical biosensors for toxicity assessment were almost based on 'one-pot' principle, i.e., mediators and the under-test chemicals were mixed together in the same vessel. In this process, the electron mediator is assumed to be merely an electron acceptor and cannot react with under-test toxicants. Actually，some under-test pollutants (such as metal ions) could react with the electron mediators, thus affecting the detection accuracy and sensitivity of the sensors. It was also found that at least two other interference factors have been ignored in present'one-pot' mediated electrochemical biosensor systems, i.e., (1) the electrochemical sensitivity of mediators to pH; and (2) the potential reactions between under-test chemicals and buffers and the consequent pH changes. In this study, the three ignored interference factors have been investigated systematically and demonstrated by significance tests. Moreover, a solving strategy, an isolation method, is proposed for fabrication of novel mediated electrochemical biosensor to avoid the interference factors existing at present mediated electrochemical biosensor. According to the testing results obtained from the isolation method, IC50 values of Cu2+, Cd2+, Zn2+, Fe3+, Ni2+ and Cr3+ were 21.3 mg/L, 3.7 mg/L, 26.7 mg/L, 4.4 mg/L and 10.7 mg/L, respectively. The detection results of four real water samples also suggested this method could be applied for the practical and complex samples.

Single Pair Förster Resonance Energy Transfer: A Versatile Tool To Investigate Protein Conformational Dynamics.

Conformational changes of proteins and other biomolecules play a fundamental role in their functional mechanism. Single pair Förster resonance energy transfer (spFRET) offers the possibility to detect these conformational changes and dynamics, and to characterize their underlying kinetics. Using spFRET on microscopes with different modes of detection, dynamic timescales ranging from nanoseconds to seconds can be quantified. Confocal microscopy can be used as a means to analyze dynamics in the range of nanoseconds to milliseconds, while total internal reflection fluorescence (TIRF) microscopy offers information about conformational changes on timescales of milliseconds to seconds. While the existence of dynamics can be directly inferred from the FRET efficiency time trace or the correlation of FRET efficiency and fluorescence lifetime, additional computational approaches are required to extract the kinetic rates of these dynamics, a short overview of which is given in this review.

Nanodisc-Based Bioelectronic Nose Using Olfactory Receptor Produced in Escherichia coli for the Assessment of the Death-Associated Odor Cadaverine.

Cadaverine (CV), a death-associated odor, is an important target molecule for various sensor applications, including the evaluation of food spoilage. In this study, we developed an oriented nanodisc (ND)-functionalized bioelectronic nose (ONBN), based on carbon nanotube transistors and nanodiscs embedded with an olfactory receptor produced in Escherichia coli (E. coli) for detection of CV. To fabricate ONBN devices, a trace-amine-associated receptor 13c (TAAR13c) binding to CV was produced in E. coli, purified, reconstituted into NDs, and assembled, in the desired orientation, onto a carbon- nanotube-based field-effect transistor with floating electrodes. The ONBN showed high performance in terms of sensitivity and selectivity. Moreover, the ONBN was used to measure CV in diverse real-food samples for the determination of food freshness. These results indicate ONBN devices can be utilized to evaluate the quality of food samples quantitatively, which should enable versatile practical applications such as food safety and preservative development. Moreover, the ONBN could provide a useful tool for detection of corpses, which could be practically used in disaster responses.

Integrated process development-a robust, rapid method for inclusion body harvesting and processing at the microscale level.

Escherichia coli stores large amounts of highly pure product within inclusion bodies (IBs). To take advantage of this beneficial feature, after cell disintegration, the first step to optimal product recovery is efficient IB preparation. This step is also important in evaluating upstream optimization and process development, due to the potential impact of bioprocessing conditions on product quality and on the nanoscale properties of IBs. Proper IB preparation is often neglected, due to laboratory-scale methods requiring large amounts of materials and labor. Miniaturization and parallelization can accelerate analyses of individual processing steps and provide a deeper understanding of up- and downstream processing interdependencies. Consequently, reproducible, predictive microscale methods are in demand. In the present study, we complemented a recently established high-throughput cell disruption method with a microscale method for preparing purified IBs. This preparation provided results comparable to laboratory-scale IB processing, regarding impurity depletion, and product loss. Furthermore, with this method, we performed a "design of experiments" study to demonstrate the influence of fermentation conditions on the performance of subsequent downstream steps and product quality. We showed that this approach provided a 300-fold reduction in material consumption for each fermentation condition and a 24-fold reduction in processing time for 24 samples.

Biomarkers of oxidative damage in bacteria for the assessment of sanitation efficacy in lettuce wash water.

In the fresh produce industry, validation of sanitation efficacy is critical to prevent cross-contamination of produce. The current validation approaches are either based on time-consuming plate counting assays or indirect measurements of chemical properties of wash water. In the study, the focus was to identify biomarkers that can provide direct assessment of oxidative damage in bacteria upon exposure to sanitizers in the presence of fresh produce and correlation of these oxidative biomarkers with logarithmic inactivation of bacteria. Two endogenous bacterial biomarkers, protein carbonylation and thiol oxidation, were evaluated for assessing oxidative damage in Escherichia coli O157:H7 and Listeria innocua during sanitation of pre-cut lettuce leaves with NaOCl or H2O2. Results show that NaOCl treatment was more effective than H2O2 for oxidation of both the intracellular thiols and protein carbonylation in the selected strains. Statistical analysis of the measurements illustrates that oxidation of the intracellular thiol induced by NaOCl or H2O2 was correlated with logarithmic reduction of E. coli O157:H7 and L. innocua. In contrast, changes in the protein carbonylation content were not correlated with reduction in bacterial cell viability. In summary, these results provide a novel approach to validate sanitation efficacy for the fresh produce industry.